Jump to content

=SABER=

Members
  • Content count

    23
  • Joined

  • Last visited

About =SABER=

  • Rank
    InsanelyMac Protégé

Recent Profile Visitors

1,715 profile views
  1. =SABER=

    Lenovo ThinkPad X61 Tablet

    Ad1984fix.kext is a file made for origin AppleHDA.kext. The content is those different between Ogininal AppleHDA and the pin-configured AppleHDA. So you have to choose one file between "AD1984fix.kext" and "AppleHDA"(pin-configured), and use EFI-String to load them. The only problem about AD1984.kext is, because the newest AppleHDA's is something different with the old one, the Line-IN mic didn't work. Methods about audio: 1. EFI-string + installed AppleHDA.kext 2. EFI-string + AD1984fix.kext (put it in Extra/Extension, and made a mkext) 3. VoodooHDA only (some problem happened after sleep)
  2. =SABER=

    Lenovo ThinkPad X61 Tablet

    This kext is not good for system updating and kext managing. Why don't you put the legacy bluetooth kext in /Extra or EFI partition's Extra/Extensions only ? If does, you didn't have to reinstall any kext.
  3. =SABER=

    Lenovo ThinkPad X61 Tablet

    Wow! Some problems has fixed in 10.5.8. Let's update now. Problem fixed: 1. Brightness down after system booting. (Please reinstall the old X3100FB.kext) 2. Left USB port sometimes down to USB 1.0 3. Bluetooth sometimes cannot be detect.Did not fix yet because I delete AppleHPET.kext before. (Use my Legacy bluetooth kext to power on/off in the system)
  4. =SABER=

    enhanced gptsync tool

    http://netkas.org/?p=39 phnix had compiled 2 years ago.
  5. =SABER=

    Lenovo ThinkPad X61 Tablet

    I tried to reinstall a 10.5.6 retail, and the DSDT file and native powermanager worked fine. But after upgrading to 10.5.7, the problem happened again. I don't know what's the deferent point that makes 10.5.7 dead. I'm a little tired. I would not try again until 10.5.8 out. BTW, I found chameleon2rc2 can read right FSB info(800 MHz), but only in 10.5.6. After upgrading it, the FSB value changes to 55.30 GT/s. If you want to use smbios.plist, edit it and put it under Extra/. But this couldn't fix FSB value.
  6. =SABER=

    Lenovo ThinkPad X61 Tablet

    @@" Congratulations! But I still fail to get it work. I want to know your environment. Is your system retail Leopard? Is your "appleintelcpupowermanagement + applehpet + applelpc" all 10.5.7 original? Are you sure that native speedstep is working? (Please use Hardware Monitor 4.7 to ensure) What are your non-original kext in "/Extra/Extensions" and "/System/Library/Extensions"? What smbios.plist and bootloader did you use? How about your bios version? Would you please upload your patched DSDT.aml & DSDT.dsl, and all non-original kexts? My Environment:
  7. =SABER=

    Lenovo ThinkPad X61 Tablet

    Tiny red dot?... I guess you are a chinese, and I know you mean the trackpoint. Use Smart Scroll, this will open scroll function in most of apps.
  8. =SABER=

    Lenovo ThinkPad X61 Tablet

    Never have to use DisplayConfigX. This app is for resolution changing only. The brightness fix method contains 3 files: 1. the old X3100FB kext 2. efi string (hex it into boot.plist) 3. patched DSDT.aml (add APP0002) I guess you never patch your DSDT. Please read all posts in this thread completly.
  9. =SABER=

    Lenovo ThinkPad X61 Tablet

    No, I just modify the info.plist in And change it to legacy kext. You can go to "Sytem Preferences" -> "Bluetooth", allow Bluetooth status show in menu bar, and use menu bar icon to turn on/off. Also the hardware switch works fine, and you can use it, too. I think we have to fix DSDT first, or fail to get native speedstep. I ever tried to fix DSDT about cpus=1 problem and remove CPUManagerDisabler kext, but got kernel panic. ps. My bootloader is Chameleon 2.0rc1, maybe we should try PC-EFIv10.1 or Chameleon2.0rc2.
  10. =SABER=

    ACPI (DSDT) Patcher for BIOS and AML

    Hello, My laptop is Thinkpad X61(with Phoenix bios). I tried to patch my dsdt to get native speedstep, but failed. installed kext: OpenCompatible.kext ( or use chameleon to inject custom smbios.plist) AppleDecrypt.kextApple VoodooPS2Controller.kext ACPIBatteryManager.kext LegacyACPI_SMC_PlatformPlugin.kext (for Native SpeedStep)(download from EvOSx86) If I use patched DSDT.aml , it get kernel panic as the info in the picture. So now I still have to use cpus=1 to boot Leopard 10.5.7 . Here is my original DSDT, SSDT, and patched DSDT. Could anyone help? X61_original_and_patched_dsdt.zip
  11. =SABER=

    DSDT Patcher

    Hello, My laptop is Thinkpad X61(with Phoenix bios). I tried to patch my dsdt to get native speedstep, but failed. installed kext: OpenCompatible.kext ( or use chameleon smbios.plist to inject) AppleDecrypt.kextApple VoodooPS2Controller.kext ACPIBatteryManager.kext LegacyACPI_SMC_PlatformPlugin.kext (for Native SpeedStep) If I use patched DSDT.aml , it get kernel panic as the info shows in the picture So now I still have to use cpus=1 to boot Leopard 10.5.7 . Here is my original DSDT, SSDT, and patched DSDT. Could anyone help? X61_original_and_patched_dsdt.zip
  12. =SABER=

    Lenovo ThinkPad X61 Tablet

    I think this kext is just in experiment and you'll get panic when you boot Leopard with SD card in. Now I still use IOSDHCIBlockDevice.kext and also survives sleep function.
  13. =SABER=

    Lenovo ThinkPad X61 Tablet

    Here is my Legacy kext for bluetooth. Now we can disable it in OS X and reopen it too. My Leopard can't get sleep if the bluetooth is open, so I disable it before system sleep. [Need Help] I am trying to get original AppleIntelCPUPowerManagement working. I try to use DSDTpatcher1.0.1e to fix problem in DSDT. But after patching it, I still have to use the boot arg cpus=1 or get kernel panic. Then I try to use ACPI patcher02 beta4 . Although the program seems only for AMI & Award BIOS, our Phoenix's bios still can be patched. After being patched, the system can start without cpus=1, but no speedstep. At the moment I found this post Native speedstep for Laptop. I remove my SMBIOSEFIAir.kext and use 2 files in this article. After, I get speedstep, but now I have to use cpus=1 to boot it. So I only let one CPU into speedstep status. I don't know why I can't get native speedstep with 2 cores. Could anyone help? [Why I want to get native speedstep?] Use native speedstep can let cpu calm down. Even I only get only one core, the CPU's temparature stays in 36~46℃. If I use Coolbook, even in minimal valtage 800MHz, the temparature alway's upper than 50℃ When I use VoodooPowerMini, the tempareture's range is 42~53℃. Not bad, but not the best. DSDT fix references: DSDT Patcher, a tool to fix your DSDT ACPI (DSDT) Patcher for BIOS and AML, CPU Cores, HPET, RTC, TM, GFX... - 0.2 Beta 5 Chameleon bootloader with SSDT and DSDT override http://www.osx86.es/ Thanks. Now I can change resolutions in Leopard.LegacyBroadcomUSBBluetoothHCIController.kext.zip
  14. =SABER=

    Lenovo ThinkPad X61 Tablet

    Just post your com.apple.Boot.plist. I'm not sure. But if I use VoodooPower, I will get wrong CPU speed in System Profiler. Maybe you should try it yourself and post the result for everyone. They all made by Chun Nan, and ACPIBatteryManager is older. I think VoodooBattery is better, but it sometimes does not work very well, so I use ACPIBatteryManager.
  15. =SABER=

    Lenovo ThinkPad X61 Tablet

    Only X3100FB.kext Open EFI studio, press command+k, copy & paste grandflash's boot.plist. The content will turn to Hex string. grandflash's boot.plist includes 3 device's efi strings, and you have to install 3 kexts for them. Battery Meter: VoodooBattery.kext or AppleACPIBatteryManager.kext Power Saving: VoodooPower.kext, IntelEnhancedSpeedStep.kext, or CoolbookController.app to adjust CPU's voltage. My X61 with 4-cell now lasts 2 hrs in Leopard...
×