Jump to content

NeXtor

Members
  • Content Count

    377
  • Joined

  • Last visited

About NeXtor

  • Rank
    InsanelyMac Sage

Recent Profile Visitors

3,359 profile views
  1. Hi,
    This is the config I use from the first Moj to the last Cata, without raising anything! Everything works fine here, except my Nvidia because there is no web driver as you know. At bios I have everything by default, I just changed CPU to Synk all cores and 40 on each core. Dsdt was created by maldon and has always been the same for a long time…
    Use your serials.
    Sorry for the delay and hope it helps.

    File.zip

    Captura de ecrã 2019-10-23, às 20.02.01.zip

    1. NeXtor

      NeXtor

      There were several differences between my efi folder and your ...
      thank you very much.
      Now I just have to test everything!

  2. my fault, I thought those "Unsynchronized TSC" entries were not in the log and I saw them as errors to be solved Only one thing, in the system info the cpu is seen as 3.3 GHz Unknown. What can I do to fix this? Thanks again for your help and your time.
  3. I once again replaced the whole efi folder with the one that you linked to me without adding Kext and Kernel patch and I started the pc over and over again trying to modify each time a different thing into Bios to try ALL combinations. (The bios is already patched with microcode and msr unlock: When I edited the bios I did not find any problem while running the uefipatch and UBU programs, so I assume I patched it correctly) These are the items that I modified each time: EIST (now disabled) ASUS MultiCore Enhancement (now disabled) VT-d Note (now disabled) Decoding 4G (now disabled) In addition to these changes in the bios I also tried to change the FakeCPUID from 0x040674 to 0x0306F2 (Haswell-E) and activate/deactivate KernelPM and Cores Patch... The system starts ALWAYS but changes the number of "Unsynchronized TSC for CPU" entries in the boot log and the CPU is not recognized in the system info (3,3 Ghz Unknown CPU) . For all the combinations I tried, the following commands returned the correct values as indicated in the guide. "sysctl machdep.xcpm.mode" "kextstat|grep -y x86plat" "kextstat|grep -y appleintelcpu" "sysctl -n machdep.xcpm.vectors_loaded_count" What can I do? What am I doing wrong?
  4. I downloaded and uploaded the efi folder you linked to and then modified kernels and kexts patches based on my system by taking them from this thread: Your guide in some sections speaks specifically of the cpu "Broadwell" and my CPU is instead a "Haswell-e" and I do not read anywhere in this guide about patches "SMT" and "PKG" for "Haswell-e" so I'll have to take them somewhere... then if some patches are generic I do not know but I do not see it written... Why should I use KernelPM if the MSR is unlocked? it seems to me that you do not absolutely read the logs, do I have to highlight it? because I do not see obvious differences with the log on the front page. mine: MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x1E000005 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 0 (not enabled) - CFG Lock............................. : 0 (MSR NOT LOCKED) - C3 State Auto Demotion............... : 1 (enabled) - C1 State Auto Demotion............... : 1 (enabled) - C3 State Undemotion.................. : 1 (enabled) - C1 State Undemotion.................. : 1 (enabled) - Package C-State Auto Demotion........ : 0 (disabled/unsupported) - Package C-State Undemotion........... : 0 (disabled/unsupported) your: MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x1E000005 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 0 (not enabled) - CFG Lock............................. : 0 (MSR not locked) - C3 State Auto Demotion............... : 1 (enabled) - C1 State Auto Demotion............... : 1 (enabled) - C3 State Undemotion.................. : 1 (enabled) - C1 State Undemotion.................. : 1 (enabled) - Package C-State Auto Demotion........ : 0 (disabled/unsupported) - Package C-State Undemotion........... : 0 (disabled/unsupported) if I'm wrong, correct me... And then I never said that the system does not start. The system starts but there are some errors in the log... now i'll try to put only the _xcpm performance Kernel patch 10.14.3 (kindly provided by @PMHeart) of the first page but for the rest of the patches I do not know what to put. If you still want to help me, maybe pointing out the correct patches for my system I'm grateful, otherwise thanks again for your help.
  5. Before moving to mojave I downloaded the last bios, updated CPU microcode and patched msr following the whole point B.1) Asus Mainboard BIOS Firmware Patching and B.2) Asus X99-A II BIOS Configuration but I enabled EIST and I deactivated 4G Decoding otherwise the system did not recognize the usb. Now I did as you told me but I still have Unsynchronized TSC for CPU 2 and Unsynchronized TSC for CPU 4 and now the CPU is not recognized. I replaced the whole efi folder and followed point E.1) XNU CPU Power Management (XCPM) Configuration with the following bios settings: Advanced\CPU Configuration\CPU Power Management Configuration\ Enhanced Intel SpeedStep Technology (EIST): Enabled Turbo mode: Enabled CPU C-State: Enabled Enhanced C1 State: Enabled CPU C3 Report: Enabled CPU C6 Report: Enabled Package C State Limit: C6(non Retention) state These are the clover settings for KernelToPatch and KextToPatch and the appleintelinfo log AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved. Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 0 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0x4dd82e9df586 (2593 MHz) MWAIT C-States...........................: 8480 Processor Brandstring....................: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz Processor Signature..................... : 0x306F2 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 2 - Model................................ : 0x3F (63) Model Specific Registers (MSRs) ------------------------------------------ MSR_IA32_PLATFORM_ID.............(0x17) : 0x8000000000000 ------------------------------------------ - Processor Flags...................... : 2 MSR_CORE_THREAD_COUNT............(0x35) : 0x6000C ------------------------------------------ - Core Count........................... : 6 - Thread Count......................... : 12 MSR_PLATFORM_INFO................(0xCE) : 0x20080C3BF3812100 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x21 (3300 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 1 (LPM supported) - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 12 - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x1E000005 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 0 (not enabled) - CFG Lock............................. : 0 (MSR not locked) - C3 State Auto Demotion............... : 1 (enabled) - C1 State Auto Demotion............... : 1 (enabled) - C3 State Undemotion.................. : 1 (enabled) - C1 State Undemotion.................. : 1 (enabled) - Package C-State Auto Demotion........ : 0 (disabled/unsupported) - Package C-State Undemotion........... : 0 (disabled/unsupported) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414 ------------------------------------------ - LVL_2 Base Address................... : 0x414 - C-state Range........................ : 1 (C-States not included, I/O MWAIT redirection not enabled) IA32_MPERF.......................(0xE7) : 0x58F6725D19 IA32_APERF.......................(0xE8) : 0x644D9B78A6 MSR_FLEX_RATIO...................(0x194) : 0xE0000 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x285B00002A00 ------------------------------------------ - Current Performance State Value...... : 0x2A00 (4200 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0x2A00 ------------------------------------------ - Target performance State Value....... : 0x2A00 (4200 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x88390000 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 0 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 57 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x690A00 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 105 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000 ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) - SpeedShift Technology Enable......... : 0 (disabled) - SpeedShift Interrupt Coordination.... : 0 (disabled) - SpeedShift Energy Efficient Perf..... : 0 (disabled) - SpeedShift Technology Setup for HWP.. : No (not setup for HWP) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x22222A2A2A2A2A2A ------------------------------------------ - Maximum Ratio Limit for C01.......... : 2A (4200 MHz) - Maximum Ratio Limit for C02.......... : 2A (4200 MHz) - Maximum Ratio Limit for C03.......... : 2A (4200 MHz) - Maximum Ratio Limit for C04.......... : 2A (4200 MHz) - Maximum Ratio Limit for C05.......... : 2A (4200 MHz) - Maximum Ratio Limit for C06.......... : 2A (4200 MHz) IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1 ------------------------------------------ - Power Policy Preference...............: 1 (highest performance) MSR_POWER_CTL....................(0x1FC) : 0x2904005B ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 1 (enabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF80015FFF8 ------------------------------------------ - Package Power Limit #1............... : 4095 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1) - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds) - Package Power Limit #2............... : 4095 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2) - Time Window for Power Limit #2....... : 3 (20 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x2074E4 ------------------------------------------ - Total Energy Consumed................ : 129 Joules (Watt = Joules / seconds) MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x21 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x940000001E0460 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x94000000000000 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC3_IRTL...................(0x60a) : 0x0 MSR_PKGC6_IRTL...................(0x60b) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x20BCE36 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x20BCE36 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x533B512 IA32_TSC_DEADLINE................(0x6E0) : 0x4DD830E718FA CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz) Maximum non-Turbo Ratio/Frequency........: 33 (3300 MHz) Maximum Turbo Ratio/Frequency............: 42 (4200 MHz) P-State ratio * 100 = Frequency in MHz ------------------------------------------ CPU P-States [ (12) 33 37 ] CPU C3-Cores [ 0 10 ] CPU C6-Cores [ 0 4 6 8 10 ] CPU C6-Cores [ 0 1 2 4 6 8 10 ] CPU P-States [ 12 33 37 (42) ] CPU C3-Cores [ 0 10 11 ] CPU C6-Cores [ 0 1 2 3 4 6 8 10 11 ] CPU P-States [ (12) 33 36 37 42 ] CPU P-States [ 12 33 36 37 41 (42) ] CPU P-States [ 12 (33) 35 36 37 41 42 ] CPU P-States [ (12) 25 33 35 36 37 41 42 ] CPU P-States [ 12 16 25 33 35 36 37 41 (42) ] CPU P-States [ (12) 13 16 25 33 35 36 37 41 42 ] CPU P-States [ (12) 13 16 25 33 34 35 36 37 41 42 ] CPU C3-Cores [ 0 1 10 11 ] CPU P-States [ (12) 13 16 25 27 33 34 35 36 37 41 42 ] CPU P-States [ (12) 13 16 21 25 27 33 34 35 36 37 41 42 ] CPU P-States [ (12) 13 16 21 24 25 27 33 34 35 36 37 41 42 ] CPU P-States [ (12) 13 16 21 23 24 25 27 33 34 35 36 37 41 42 ] CPU P-States [ (12) 13 16 21 23 24 25 26 27 33 34 35 36 37 41 42 ] CPU P-States [ (12) 13 16 21 23 24 25 26 27 32 33 34 35 36 37 41 42 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 10 11 ] CPU P-States [ 12 13 16 19 21 23 24 25 26 27 32 33 34 35 36 37 41 (42) ] CPU P-States [ 12 13 16 19 21 22 23 24 25 26 27 32 33 34 35 36 37 41 (42) ] CPU P-States [ 12 13 16 19 21 22 23 24 25 26 27 28 32 33 34 35 36 37 41 (42) ] CPU P-States [ 12 13 16 19 21 22 23 24 25 26 27 28 32 33 34 35 36 37 38 41 (42) ] CPU P-States [ 12 13 16 19 21 22 23 24 25 26 27 28 30 32 33 34 35 36 37 38 41 (42) ] CPU P-States [ 12 13 16 18 19 21 22 23 24 25 26 27 28 30 32 33 34 35 36 37 38 41 (42) ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ] CPU P-States [ (12) 13 16 18 19 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 38 41 42 ] CPU P-States [ (12) 13 16 18 19 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 41 42 ] CPU P-States [ 12 13 16 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 41 (42) ] CPU C3-Cores [ 0 1 8 10 11 ] CPU P-States [ 12 13 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 (33) 34 35 36 37 38 41 42 ] CPU C3-Cores [ 0 1 8 9 10 11 ] CPU P-States [ (12) 13 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 41 42 ] CPU P-States [ 12 13 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 (33) 34 35 36 37 38 39 40 41 42 ] CPU P-States [ 12 13 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 (33) 34 35 36 37 38 39 40 41 42 ] CPU C3-Cores [ 0 1 2 8 9 10 11 ] CPU C3-Cores [ 0 1 2 3 8 9 10 11 ] CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 ] CPU C3-Cores [ 0 1 2 3 6 8 9 10 11 ] CPU C3-Cores [ 0 1 2 3 4 6 8 9 10 11 ] CPU C3-Cores [ 0 1 2 3 4 6 7 8 9 10 11 ] CPU C3-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]
  6. Hi, I need your help. I have updated from 10.13.6 to 10.14.3 but I have some problems. Audio and almost all usb ports don't work, PCI section in the system info shows only 2 items (NVIDIA Geforce GTX 780 Ti and pci144d, a802), the boot is very slow and with errors, these are just a few: Unsynchronized TSC for cpu .... Unsupported CPU Unsupported PCH kextd stall [0], (60s): 'X86PlatformPlugin', 'GFX0', 'IOHDACodecFunction', 'IOResources' kextd stall [1], (60s): 'X86PlatformPlugin', 'GFX0', 'IOHDACodecFunction', 'IOResources' kextd stall [2], (60s): 'X86PlatformPlugin', 'GFX0', 'IOHDACodecFunction', 'IOResources' kextd stall [3], (60s): 'IOPlatformEnabler', 'AGPMEnabler', 'GFX0', 'IOHDACodecFunction', 'IOResources' The bios is updated to the latest version and I modified and set it as explained in the KGP-iMacPro guide but with these changes in the Extreme Tweker section: At Overclock Tuner: XMP Cpu Strap: 125 BCLK Freq: 125 Asus Multicore: Auto CPU COre Ratio: Sync All Core core ratio limit: 34 Min CPU Cache Ratio: 25 Max CPU Cache Ratio: 25 DRAM Freq: DDR4-3000MHz Below is the link with the report generated by the RunMe app, and the EFI folder Thanks for your help https://ufile.io/t8rg9
  7. all usb work. now I check that everything else works properly ... thanks!!
  8. almost everything is ok. not all usb works. I also tried to remove the kext USBInjectAll...
  9. I installed on PC #2 in signature on a hdd that later with ccc I will clone into an SSD. could you check? Thank you Send me Fabrizios-iMac.zip
  10. During the ssdt tests I’ve noticed that the cpu is not used to the maximum and there are some errors in the boot log. I ran geekbench and the score is low. Ah, a strange thing that is happening is that if I connect the monitor via cable hdmi I no longer have the black screen at startup (for now I have rebooted 30 times and never failed ...) instead if I connect the monitor via displayport cable I have problems. I'm also having a lot of problems with Premiere. When I work there the system always crashes. If I do not open it, the pc never crashes. I am attaching the EFI folder, ioreg, bootlog, geekbench score and AppleIntelInfo log. https://ufile.io/jyg2b P.S.: now I have disabled overclocking and set everything to automatic (Virtualization - vt-d active) and regenerated ssdt.aml with "~ / ssdtPRGen.sh -x 1" but the problems remain
  11. I keep having random black screen. audio doesn't work. usb seems ok. I attach ioreg without nvidia web driver test2.zip
  12. If I disable all .aml files including DSDT keeping only SSDT.aml and SSDT-X99-All_Nextor.aml the system crashes. If I disable all .aml files keeping only DSDT.aml SSDT.aml and SSDT-X99-All_Nextor.aml the system starts but not all the usb ports work and the disk icon is orange. test1.zip
  13. Hi nmano I would like to try your ssdt all-in-one method could you make it for me too? Thanks P.S.: I have some problems with nvidia web drivers. very often the system crashes. If I disable web drivers, the pc is fine but without cuda acceleration for-all-in-one-ssdt.zip
×