Jump to content


  • Content Count

  • Joined

  • Last visited

About zonex

  • Rank
    InsanelyMac Protégé
  1. To Moderators : Sorry if this was in the wrong section , plz move if Required , and plz tell me if you ever saw this Problem before just so i can know what am I dealing with.... Well it's pretty much what the title say , I'm trying to Boot a Preinstalled Lion on a Satellite C660-1HE (specs Below) i Tried using TonyMac's [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] 3.1.1 and 3.0.1 and they both fail to load the OS , while tonymac's rBoot CD was able to start the chimera boot-loader and get me in the OS , The Problem is i tried to install a boot-loader to the HDD so it can start up by it's own and it never does , Tried Chameleon 2.0 r1518 and a couple of older ones ,, also tried Chimera 1.5.4 (same one of rBoot) but they're not even starting the boot-loader it self. i always get a "boot failure" message when i try to boot form HDD and then it switches to CD. I also tried installing each of Chimera and Chameleon to a USB flash drive that works perfectly with my other Hackintosh but it also failed to even start the boot-loader . you can lookup Tonymac's installation CDs Online , the only thing that ever started a boot-loader interface and actually booted my Lion 10.7 was the rBoot LE CD.. Plz help , as this is Urgent since this is not my Laptop and i have to return it to my friend who i promised a working HackBook after checking his specs and now i can't even start to install the Proper kexts as i need to have full control on chameleon boot plist.... :$ :$ Laptop Specs: Processor type : Intel® Core™ i3-380M Processor clock speed : 2.53 GHz Graphics adapter type : ATI Mobility Radeon™ HD 5470 supporting HyperMemory™ technology memory amount : 512 MB dedicated VRAM. Available graphics memory can be expanded using system memory, through HyperMemory™ technology: up to 2,233 MB with 4 GB system memory installed, and up to 3,571 MB with 8 GB system memory, (with pre-installed 64-bit operating system). memory type : DDR3 Video RAM (resp. Video RAM and system memory combined) connected bus : PCI Express® Wireless communication Compliancy : Wi-Fi® Network Support : 802.11b/g/n Manufacturer : Atheros Wired communication topology : Fast Ethernet LAN speed : 10BASE-T/100BASE-TX see the link http://gulf.computers.toshiba-europe.com/i...hibaShop/false/
  2. hello i have a TP-Link tl-wn651g pci with an atheros ar5005gs chip it used to work on older os x versions as 10.5 but now its not being detected on my 10.6.7 what to do ? thanx in advance i have uploaded s screen shots from device manager in ubuntu
  3. zonex

    ATI HD 5770

    has any one heard any thing about apple putting ati 5000 series in any of there macs and what about the 5770 it self cant i use it at all now in 10.6.2 ????? thanx
  4. zonex

    natit is not working on 7300 gs inno3d 256mb

    no solution huh ?
  5. hi i cant seem to get my 7300 gs to work with any way i tride nvinject nantit nv kush and even EFI strings but thay all lead to the same result black screen after boot and nothing hapens as long as i wait so i go to the -s and delet any change that i made ? plezz help me ?!! i think it has some thing to do with my Kernel it is voodoo 9.5 on th iPC final im waiting for ur ideas
  6. zonex

    QE on 7300GT on Ideneb 10.5.5

    did u get it to work ? im having problem with a 7300 gs 256 i cant even a res higher that 1024*768 and when i use titan "natit.kext" or nvinject nvkush or even EFI string i get a black screen after boot and it dose not go a way as long as i wait ?? any ideas ???
  7. hello i have installed natit on my mac with kext helper on an iPC final but my 7300 gs inno 3d 256MB dose not seem to be recognized on the system i cant even see a resolution above 1024*768 !! when i use NVinject latest it gose to a black screen after boot and no matter how long i wait it dose not go unless i delet the NVinject.kext from singel user mode ?? plz help me if u go any ideas oh by the way i tried EFIs but same result as NVinject pc spects :- CPU : P4 3.0/2MB MOBO : GA-945pl-s3 Gigabyte VGA : inno3d 7300 gs 256MB HDD : WD160 GB SATA WIFI : TP-LINK wn651g "working fine"
  8. ok done i have fixed the prob but do i have to select cpus=1 in the ipc final ??? when i did it worked but when i didnt the screen became black after the boot and nothing happed or that cuz i selected an nvidia driver ???
  9. ok i have done cpus=1 -v -f together & cpus=1 -v same result i think it is my nVidia card ?? am i right
  10. after successful installation of both of ipc and i atkos on my pc it gose in to a loop pof restarts that is after the final reboot to finalize the installation i tride -v -x cpus=1 and nothing even deleted the nvidia kexts but smae result ??? any ideas. PC spects:- mobo : Gigabyte GA 945pl-s3 CPU: intel P4 3.0/2 mb RAM: 1 GB "512x2" 533hz VGA: nVidia 7300 gs 256 MB inno3d HDD: WD 160 GB SATA WLAN: TP-LINK 651g see my prob here :
  11. zonex

    iPC final reboot loop ?help?

    i found something like what i have but no luck in doing the same here feel free to look http://www.insanelymac.com/forum/index.php?showtopic=142288
  12. zonex

    iPC final reboot loop ?help?

    i have tried most of the options but still nothing even changed the kernels i think it has some thing to do with the mobo or my sata HDD if any one can help or have an ida plz tell us !!
  13. zonex

    iPC final reboot loop ?help?

    if i updated my bios will it help ????
  14. zonex

    iPC final reboot loop ?help?

    i can get in to thr installer normaly and i have successfuly instaled it but when it starts the os it restarts so fast i cant even tell where is the problem from even with the -v