Jump to content
About Just Joined group Read more... ×

pepto

Members
  • Content Count

    143
  • Joined

  • Last visited


Reputation Activity

  1. Like
    pepto got a reaction from bocajoe in [Guide] macOS High Sierra 10.13 - Dell Optiplex 780 (760) (755) (790) (990)   
    I have Mojave installed but have the video card hd5450 not working at the moment, has somebody the HD5450 working on Mojave.
     
    Also problems with USB ports on the back I am using the USBInjectAll.kext but only 3 ports in the front is working at the moment.
    --USB is working now on all ports I have insert in my config.plist the following found on internet:
    Open config.plist with clover configurator Select Kernel and Kext Patches Select the "+" at the button and input: Name*: com.apple.driver.usb.AppleUSBXHCI Find* [Hex]:83FB0F0F 83030500 00 Replace* [Hex]: 83Fb0F90 90909090 90 Comment: USB 10.14 Patch] Save config.plist  
     
  2. Haha
    pepto got a reaction from chris1111 in [Guide] macOS High Sierra 10.13 - Dell Optiplex 780 (760) (755) (790) (990)   
    Ok thanks for the help everything is working again on my optiplex 790, it has been a long time for me to install OSX but after 2 days of struggling it works. Nice to see that the optiplex topic is still alive. Great work to all  
  3. Haha
    pepto got a reaction from chris1111 in [Guide] macOS High Sierra 10.13 - Dell Optiplex 780 (760) (755) (790) (990)   
    Ok thanks for the help everything is working again on my optiplex 790, it has been a long time for me to install OSX but after 2 days of struggling it works. Nice to see that the optiplex topic is still alive. Great work to all  
  4. Like
    pepto got a reaction from chris1111 in [Guide] macOS High Sierra 10.13 - Dell Optiplex 780 (760) (755) (790) (990)   
    OK Thanks for the clover.zip it works
  5. Like
    pepto got a reaction from chris1111 in [Guide] macOS High Sierra 10.13 - Dell Optiplex 780 (760) (755) (790) (990)   
    OK Thanks for the clover.zip it works
  6. Like
    pepto got a reaction from MacPeet in [Guide] Yosemite 10.10.X - Dell Optiplex 780 (760)   
    Run OSX Yosemite on a Dell Optiplex 780
    This tutorial will describe the steps to install Yosemite on a Dell Optiplex 780 (this will also works on a 760).
    The installation goes to the latest version of 10.10, and when there is a new update i will change the tutorial as soon as possible.
    If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial.

    I have also included the PDF file of the guide and the zip file to install OSX Yosemite.

    A special thanks goes to Brian from Tech Erra for using parts of their tutorial.

    I am from The Netherlands so sorry for my bad English.




    1. Credits/Sources
    Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide:
    Tech Erra OSX86 Wiki InsanelyMac And all other forum members who have posted in my topic and helping out the community. 2. Requirements
    Here are the requirements:
    A Dell Optiplex 780 – This is necessary to install OSX Yosemite for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OSX Mountain Lion.
    Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy Yosemite 10.10 GM – If you don’t have a App Store Account, then create one to download OS X Yosemite. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.10 to – For me, I used a 500GB partition to install 10.10 to. An PCI Express Video Card – For use with QE and CI Highly recommended. I use a Ati Radeon HD5450 1GB but 512MB or 2GB also works. CLOVER_780.zip – This ZIP file contains everything that you need to get your flash drive and hackintosh properly prepared. Note: number 7 contains the files for clover, you can copy the entire directory to the EFI Partition:

    3. My Specs
    My installation was successfully done on an Dell Optiplex 780 Desktop computer with the following specs.
    NOTE: A PCI video card is recommended to use the full potential of OSX Yosemite because the on board video card doesn't support QE/CI.
    Intel Core 2 Duo E7500 @ 2.93GHz 8GB DDR3 1333Mhz RAM Western Digital 500GB HDD ATI RADEON HD5450 1GB Intel WG82567LM onboard network Bluetooth USB Cambridge silicon radio (works OOB) ADI 1984A HDA audio onboard HP W2207h Monitor 1680×1050 display Apple Magic Trackpad Apple Magic Mouse Apple Wireless Keyboard US 4. Download OS X Yosemite
    Open Mac App Srore. Login with your Apple ID. Download OS X Yosemite. Done! The Application INSTALL OS X YOSEMITE will appear in /Applications
    5. Prepare Bootable USB Drive
    This step extracts the OS X Installer contents, then installs clover bootloader to the USB stick.
    Make sure to backup the files that are already on your USB flash drive:

    Insert the USB drive. Open up /Applications/Utilities/Disk Utility. Highlight the USB drive in the left column. Click on the partion tab. Click Current and choose 1 Partition. Click Options... Choose GUID Partition Table. Under Name: type USB (you can rename it later) Under Format : choose Mac OS X Extended (Journaled) Click Apply then Partition.[/b] Go to Applications and find the OS X Yosemite installer. Right click on the installer and choose show package contents Navigate to Contents/Shared Support and double click on the InstallESD.dmg, the .dmg should now mount and appear on your desktop. Open Terminal and type the following command: open /Volumes/OS X Install ESD/BaseSystem.dmg. Now, open disk utility and restore your USB drive, NOT the drive, but the volume contained on the drive with the mounted "BaseSystem" NOT the .dmg. Rename your USB drive to Yosemite. (not the dmg) You can tell which drive is the USB from the size. Rename your USB drive to Yosemite. (not the dmg) You can tell which drive is the USB from the size.
    - cp /Volumes/OS X Install ESD/BaseSystem.dmg /Volumes/Yosemite/
    - cp -a /Volumes/OS X Install ESD/BaseSystem.chunklist /Volumes/Yosemite/
    - rm /Volumes/Yosemite/System/Installation/Packages
    - cp -a /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/Yosemite/System/Installation/Packages Download the latest version of Clover from sourceforge. Open Clover package installer. Hit Continue, Continue, Change Install Location... Choose the USB, now called Yosemite. Hit Customize and install Clover to the same USB with the following Custom Install settings: ( see image). Download this zip file. Unzip the flies provided in CLOVER_780.zip. Move all the files in the unzipped /Clover folder to /EFI/EFI/Clover/, Make sure to choose to MERGE these folders or overwrite them 6. Install OS X Yosemite.
    This part is the most time consuming. Using a USB 4G flash drive will help things out quite a bit.
    Shut Down. Enter Bios via tapping F2 during boot. Change SATA Operation to AHCI (Leave the Booting mode on Legacy! UEFI is not support/does not work.) Click Save and reboot Press the F12 key to choose boot device, select USB Drive When Clover boot screen is visible, choose Boot "Mac OS X from Yosemite". The system will then boot into OS X Installer. For a new installation of OS X, you MUST erase and format the destination drive according to the following steps before continuing. If you are upgrading from Lion, Mountain Lion or Mavericks and you want to keep your files and apps, skip steps a-j.
    a. Choose Disk Utility.
    b. Highlight your target hard drive for the Yosemite installation in left column.
    c. Click Partition tab.
    d. Click Current and choose 1 Partition.
    e. Click Options...
    f. Choose GUID Partition Table.
    g. Under Name: type YosemiteHD (You can rename it later).
    h. Under Format: choose Mac OS Extended (Journaled).
    i. Click Apply then Partition.
    j. Close Disk Utility. When the installer asks you where to install, choose YosemiteHD, or your existing install. Upon completion, system will restart a 1st time. Press the F12 key to choose boot device. When Clover boot screen is visible, Press F4 (this wil dump your dsdt/ssdt, we don't need it for now), choose YosemiteHD. You’ll eventually get to the setup screens for OS X Yosemite. Go through that process to setup OS X Yosemite. Choose by "How Do You Connect" for "My Computer Does Not Connect to the Internet" we will fix this later, go further with the setup process. The setup process will take about 3 minutes. Done. 7. Adjust some settings in OS X 10.10
    Once in 10.10 go to finder –preferences –General and choose in show these items on the desktop for.
    - Hard Disk
    - External Disk
    - CD Go also to System Preferences – Security& Privacy click on the lock on the left corner and type your password. Choose by “Allow applications downloaded from: for “Anywhere – Allow from anywhere. Close system preferences. 8. Installing Clover on you Hackintosh
    These settings will install the bootloader to the system drive's EFI partition automatically as part of the scripting. After completion, the system drive's EFI partition will automatically mount.
    A few more changes need to be made to the default Clover installation:

    Run the Clover installer once again, select the following things show in the image below. Open Clover package installer. Hit Continue, Continue, Change Install Location.... Choose the USB, now called YosemiteHD. Hit Customize and install Clover with the following Custom Install settings: ( see image) Download this zip file again. Copy Clover Configurator from the zip (CLOVER_780- Tools) to Application and run it In Clover Configurator (From now on referred to as "CC") go to EFi Tab, click mount and enter your password. Move the folder /Clover from the unzipped to your hard drives /EFI/EFI/Clover/ location, make sure to choose to MERGE these folders. Open Clover Configurator and import config.plist(in EFI/EFI/Clover partiton) and edit these values:
    · SMBIOS: create your new SMBIOS (iMac 9,1) with random Serial Number Then EXPORT config.plist to /EFI/Clover/ of EFI partition Move the folder /Clover from the unzipped to your hard drives /EFI/EFI/Clover/ location, make sure to choose to MERGE these folders. Finished and Reboot your fresh installed OS X 9. Video Fix for HD5450
    Copy the Kext files AMD5000Controller.kext and AMDRadeonX3000.kext from system/library/extension to your desktop. Go to AMD5000Controller.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>IOPCIMatch</key> and add your string for HD5450
    ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002)
    <string>0x68F91002 0x68981002 0x68991002 0x68E01002 0x68E11002 0x68D81002 0x68C01002 0x68C11002 0x68D91002 0x68B81002 0x68B01002 0x68B11002 0x68A01002 0x68A11002 </string> Save and Exit Go to AMDRadeonX3000.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>AMDCedarGraphicsAccelerator</key>
    and then look for the first <key>IOPCIMatch</key> and add your string for HD5450
    ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002)
    add <string>0x68F91002 0x68E01002</string> Save and Exit Install both kext files with Kext Utility Now reboot. After Reboot the video card must be working with QE/CI. 10. BOOT 0 ERROR
    If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following
    Reboot system back into Yosemite installer (USB)FLASH DRIVE). Run Disk Utility find the Disk Identifier (eg. disk0s2). Unmount the drive you installed Yosemite on Launch Terminal and execute the following command: dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2 Exit Terminal Boot Normally 11. Finished!
    You’ve successfully installed OSX Yosemite onto your Dell Optiplex 780.
    run os x Yosemite 10.10.pdf
  7. Like
    pepto got a reaction from Allan in [GUIDE] Run macOS Sierra on a Dell Latitude E6320   
    Run macOS Sierra on a Dell Latitude E6320
     
    NO ONE IN THIS FORUM (INCLUDING ME) IS RESPONSIBLE FOR ANY LOSS (DATA, MATERIAL, EQUIPMENT…) OCCURRED TO YOU, YOU ARE THE ONLY ONE RESPONSIBLE, AND BY FOLLOWING THESE INSTRUCTIONS YOU AGREE TO TAKE ALL THE RISKS AND RESPONSIBILITIES. THIS INSTALLATION ISN'T WITHOUT RISKS SO TAKE ALL THE PRECAUTIONS BEFORE DOING ANY FOOLISH ACTION, BACKUP YOUR DATA!
    This tutorial will describe the steps to install macOS Sierra on a Dell Latitude E6320 i5 2520M.
    If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial.

    A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial

    I am from The Netherlands so sorry for my bad English.


    1. Credits/Sources
    Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide:
    OSX Latitude.com Tech Erra OSX86 Wiki InsanelyMac Forum member Jake Lo from OSXLatitude.com for helping me out with installing. Morpheousman and Polyzargon from InsanelyMac who helping me with my other topics. (Dell 780) MacPeet, Chris1111 and all other forum members who helping out the community. A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial. And Hervé from insanelymac for using is modified DSDT.aml for E6320
    2. Requirements
    Here are the requirements:
    A Dell Latitude E6320 – This is necessary to install macOS Sierra for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OSX El Capitan, Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy of macOS Sierra – The method used by this guide requires that you have a copy of the macOS Sierra Installation app, wich is available for free from the Mac App Store. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.12 to – For me, I used a 500GB HDD to install 10.12 to. An Wireless N Nano USB Adaptor – For use with wifi Highly recommended. I use a TP-LINK TL-WN725N adaptor. E6320_V2.zip – This ZIP file contains everything that you need to get your flash drive properly prepared. 3. My Specs
    My installation was successfully done on an Dell Latitude E6320 i5-2520M laptop computer with the following specs.
    Intel Core i5-2520M @ 2.5GHz, 3MB cache, Dual Core 4GB DDR3 1333Mhz RAM Western Digital 250GB HDD INTEL HD3000 Video Intel 825xx onboard network Dell wireless 375 Bluetooth 3.0 onboard (works OOB) IDT 92HDxxx HD audio onboard TL-WN725N Wireless N Nano USB Adaptor Apple Magic Trackpad (only @home) Apple Wireless Keyboard US (only @home) Apple Magic Mouse 4. Download OS X Sierra
    Download macOS Sierra from the Mac App Store. Once macOS Sierra is downloaded, close the install pop-up that appears using Command (⌘)+Q. The application INSTALL macOS Sierra will appear in /Applications Done! 5. Prepare bootable USB Installer
    Note on flash drives: You will need a USB flash drive to make this work. Your USB should be at least 8GB and a USB 3.0 drive is preferred. Kingston sells an 8GB USB 3.0 drive for less than 10 euro.
    Now, we need to prepare the USB Drive so that it will properly bootup on your PC. Make sure that the disk you choose to use doesn't contain anything that you want to keep, because the following tutorial will purge everything on the drive.
    Open Finder - Applications and right-click on Install macOS Sierra and select Show Package Contents. Open Contents - Resources. Open a Terminal window thru Applications - Utilities - Terminal. In the Terminal window type sudo followed by a space. Drag the createinstallmedia file from the finder window opened in Step 4 to the Terminal Window. Type --volume followed by a space. Connect your USB drive and drag the USB drive into the Terminal Window. Type --applicationpath in the Terminal followed by a space. Open Finder - Applications and drag the Install macOS Sierra into the Terminal Window. Press Return on the keyboard to submit the full command. Type a 'Y' to continue when prompted to do so, and press Return on your keyboard The install process will begin by erasing the contents of your USB disk and copying the installer files to the USB disk. The entire process is quite lengthy; it can takes around 15-30 minutes, so you will need to show some patience 6. Installing Clover to the USB Disk
    Unpack the E6320.zip to your desktop or specified map you preferred. Open the map E6320 - Clover_v2.3k_r3726. DubbleClick on the Clover_v2.3k_r3726.pkg package file. Clover installation screen will be prompt. Click on Continue - Continue. Click on Change Install Location on the right bottom. Choose your USB Stick named Install macOS Sierra Public Beta click on Continue. Click on Customize on the left bottom. Choose Install Clover in the ESP Choose Bootloader : Install boot0af in MBR Choose in Clover EFI for CloverEFI 64- Bits SATA At last choose Install RC Scripts on target volume Click after that on Install. Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder. 7. Prepare USB stick for the Dell E6320
    Now, we need to prepare the USB Drive so that it will properly bootup on your Laptop.
    Go to map where you have unpacked the E6320 zip file there you will find a map called EFI. Copy the map EFI and go to your EFI partition thru Finder. Paste the EFI folder in the EFI partition and replace everything. Done your USB Stick is ready to boot macOS Sierra installer. 8. Bios Settings Dell Latitude E6320
    Before we boot from the Dell Latitude we need to optimize the bios for OSX Sierra
    Start your Dell Latitude and press F2 to get into the Bios. In the main screen click on "Load Defaults", the bios will be reset to default settings. Go to General - Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting. Go then to System Configuration - SATA Operation and choose on the right for AHCI click again on apply and choose exit, now the Bios is ready for installing OSX Sierra. 9. Installing OSX Sierra from your USB drive
    Time for the fun stuff! We’ll now boot from your USB drive and install macOS Sierra onto the Hard Drive.
    Using a USB 4G flash drive will help things out quite a bit.
    Power on unit while tapping F12 Key to choose boot device, select USB device. When Clover boot screen is visible, choose boot "Install macOS from Sierra USB Installer". Choose you desired language and click on the arrow, the macOS Utilities screen will appear. For a new installation of macOS, you must erase and format the destination drive according to the following steps before continuing. If you are upgrading from Mavericks , Yosemite or El Capitan and you want to keep your files and apps, skip steps 1-9. (NOT TESTED IN SIERRA)
    Choose in the macOS utilities for Disk Utility and click Continue. Disk Utility will be opened, highlight your target drive for macOS Sierra installation in the left column. Click ERASE button on top. Under Name: Type Sierra or any other name. Under Format: Choose Mac OS Extended (Journaled). Under Scheme: Choose GUID Partition Map. Click Erase. Click on Done. Close Disk Utility you will be prompted to the macOS Utilities screen. In the macOS Utilities screen choose Install macOS and click 2x on Continue. Agree the license agreement and click again on Agree When the installer asks you where to install macOS, choose your Sierra HDD click on Install. Sierra will be installed on the HDD, this will take about 6 - 15 minutes depending of your HDD. Upon completion, system will restart a 1st time. Press F12 key to choose the boot device. When the Clover Boot screen is visible, Choose "Boot macOS Install from Sierra". macOS will continue to Install the OS on your HDD this will take about 10 -25 minutes after that the installation will be finished and your laptop will reboot. 10. Booting for the first time macOS Sierra
    When the Clover Boot screen is visible, Choose "Boot MAC OS X from Sierra" You will eventually get to the setup screens for macOS Sierra. Go through the setup process to setup macOS Sierra. At the country selection choose your country and press continue. Select Your Keyboard choose ABC and press Continue. Choose at "How do i connect to the internet " ..."My Computer Does Not Connect to the Internet", we will fix this later, go further with the setup process and press continue. Choose at Transform Information To This Mac for "Don't Transfer any information now" click on Continue. At Enable Location Services for "Enable Location Services on this Mac" click Continue. Agree the Terms and Conditions. Create your Computer Account and uncheck "Set time zone based on current location" press Continue. Choose your Timezone and click Continue. At the Diagnostic screen click Continue. The setup process is ready, Done!. 11. Setting up your keyboard
    When the setup is finished the Keyboard Setup Assistent will appear. Press Continue to Identify Your Keyboard. You will ask to press some keys. After pressing some keys you will get the message Your Keyboard Cannot Be Identified, press OK. Choose at Select the Keyboard Type for ANSI (United States and others) Press Done your Keyboard is setup 12. Adjust some settings in macOS 10.12
    Once in 10.12 go to Finder – Preferences – General and choose in show these items on the desktop for Hard Disk External Disk Go to tab Sidebar and choose your desired Favorites, Shared and Devices. Close the Finder Preferences. 13. Change Security & Privacy for 3rd party software
    Start Terminal choose GO - Utilities - Terminal. In Terminal type sudo spctl --assess --master-disable followed by password to activate the option in Security & Policy "Allow apps downloaded from" Anywhere. Go to System Preferences – Security& Privacy and look of the option "Anywhere" is active if not activate the option. Close system preferences. 14. Revert HDD for proper boot.
    Launch Terminal and execute the following command: sudo diskutil corestorage revert / When prompt type your password. Exit Terminal and reboot again with your USB to macOS. 15. Installing Clover to the HD
    The steps 15 and 16 are the same as steps 6 and 7 but now we will install clover to the HDD of the E6320.
    Unpack the E6320.zip to your desktop or specified map you preferred. Open the map E6320 - Clover_v2.3k_r3726. DubbleClick on the Clover_v2.3k_r3726.pkg package file. Clover installation screen will be prompt. Click on Continue - Continue. Click on Change Install Location on the right bottom. Choose your HDD named Sierra click on Continue. Click on Customize on the left bottom. Choose Install Clover in the ESP Choose Bootloader : Install boot0af in MBR Choose in Clover EFI for CloverEFI 64- Bits SATA At last choose Install RC Scripts on target volume Click after that on Install, Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder. 16. Prepare HDD for booting the Dell E6320
    Now, we need to prepare the HDD Drive so that it will properly bootup on your PC.
    Go to map where you have unpacked the E6320 zip file there you will find a map called EFI.
    Copy the map EFI and go to your EFI partition thru Finder. Paste the EFI folder in the EFI partition and replace everything. Done your E6320 is ready to boot macOS Sierra. 17. Install Wlan driver for the TL-WN725N
    The wireless lan on the Dell E6320 doesn’t work, therefore I use a Wireless N USB Nano Adaptor from TP-LINK. The software is straight forward and installs without problems.
    Go to your E6320 folder which you have extracted to your HDD of your macOS Sierra. Open the map "beta driver for mac os X 10.11" . Run Installer_RTL.pkg Click Continue - Continue - Continue - Agree - Install Enter your Password and click Install Software - Continue Installation Click Restart to Reboot your Laptop. The first time you will get a kernel panic don't worry reboot again and the laptop will start macOS Sierra. Done! 18. What's working?
    Just about everything.

    19. Finished!
    You’ve successfully installed macOS Sierra onto your Dell Latitude E6320.

    TROUBLESHOOTING

    20. iMessage & FaceTime Fix
    You will need MLB and Rom numbers from a legit Mac device that is on the mac server.
    Run iMessage debug on a iMac, Macbook, etc and make a copy and paste of the Terminal output.
    Open Clover Configurator. Mount EFI Partition. Import config.plist from EFI/EFI/Clover (File , import configuration, browse to config.plist and select). In Clover Configurator Click on RT Variables, Enter Rom and MLB Values from iMessage output from valid iMac device. Save changes to config.plist. Reboot, Sign into iMessage. iMessage and FaceTime should now both be working.

    21. BOOT 0 Error
    If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following.
    Reboot system back into Sierra installer (USB)FLASH DRIVE). Run Disk Utility find the Disk Identifier (eg. disk0s2). Unmount the drive you installed Sierra on. Launch Terminal and execute the following command: dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2. Exit Terminal. Boot Normally. Run macOS Sierra 10.12 E6320.pdf
  8. Like
    pepto got a reaction from faizfaris9 in [Guide] Mavericks 10.9.X - Dell Optiplex 780 (760)   
    Updated 27 februari 2014
    - Added update 10.9.2 steps in the document
    - Latest PDF version 1.2 with date 27 februari 2014
    Updated 21 october 2013
    - Fixed some text true the document
    - Rewrite of chapter 7
    - Added new images for chameleon install and iMessage Error
    - Added section TROUBLESHOOTING
    - Added Boot 0 : ERROR in Troubleshooting
    - Added iMessage Error in Troubleshooting
    - New Install109.zip

    Run OSX Mavericks on a Dell Optiplex 780
    This tutorial will describe the steps to install Mavericks on a Dell Optiplex 780 (this will also works on a 760).
    The installation goes to the latest version of 10.9, and when there is a new update i will change the tutorial as soon as possible.
    If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial.

    I have also included the PDF file of the guide and the zip file to install OSX Mavericks.

    A special thanks goes to Brian from Tech Erra for using parts of their tutorial.

    I am from The Netherlands so sorry for my bad English.




    1. Credits/Sources
    Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide:
    Tech Erra OSX86 Wiki InsanelyMac Forum member Pingu from Germany for helping me out with the text changes. And all other forum members who have posted in my topic and helping out the community. 2. Requirements
    Here are the requirements:
    A Dell Optiplex 780 – This is necessary to install OSX Mavericks for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OSX Mountain Lion.
    Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy Mavericks 10.9 GM – If you don’t have a Mac Developer Account, then you’ll find torrents of 10.9 around the web. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.9 to – For me, I used a 500GB partition to install 10.9 to. An PCI Express Video Card – For use with QE and CI Highly recommended. I use a Ati Radeon HD5450 1GB but 512MB or 2GB also works. Install109.zip – This ZIP file contains everything that you need to get your flash drive properly prepared. Note: The files for number 8 "Install109.zip" contains the following Directory's (4) and files:
    Kernel - Mach Kernel Kexts - FakeSMC.kext - NullCPUPowerManagement.kext - EliottForceLegacyRTC.kext - AppleIntelE1000e.kext - VoodooHDA.kext OSInstall - OSInstall - OSInstall.mpkg (Not used for my configuration because I use the entire hard disk) Utils - Chameleon-2.2svn-r2265 - Chameleon Wizard - Kext Utility - EFI Studio - ShowHiddenFiles The first 3.kext files will fix most kernel panics en bios reset that you might experience while booting.
    The 2 OSInstall files will allow you to install 10.9 onto an MBR-partitioned drive ( ! this is not tested, for further info go to insaneleymac forum !).

    3. My Specs
    My installation was successfully done on an Dell Optiplex 780 Desktop computer with the following specs.
    NOTE: A PCI video card is recommended to use the full potential of OSX Mavericks because the on board video card doesn't support QE/CI.
    Intel Core 2 Duo E7500 @ 2.93GHz 8GB DDR3 1333Mhz RAM Western Digital 500GB HDD ATI RADEON HD5450 1GB Intel WG82567LM onboard network Bluetooth USB Cambridge silicon radio (works OOB) ADI 1984A HDA audio onboard HP W2207h Monitor 1680×1050 display Apple Magic Trackpad Apple Wireless Keyboard US 4. Preparing your SSD or HDD for install on a MBR-partitioned drive
    If you intent to install OSX86 Mavericks on the same Hard disk as your windows follow the steps below.
    For a clean install on a new formatted hard disk go to Chapter 5.
    If you’re in Windows 7, you can easily make a new partition on an SSD or HDD via the Disk Management program.
    Start>Run (or Windows key on your keyboard plus R). diskmgmt.msc (press enter after typing that) Find your drive, right-click on it, and go to Shrink Volume. Wait for it to calculate the amount of space you can make your partition, and enter in your amount (for an exact GB amount, multiple your desired amount of GB times 1024, so a 20GB partition would be 20480MB). Let it make your partition. It will show up as unallocated space. Format the new unallocated space as NTFS and give it a label (mine was Mavericks). Done! 5. Formatting your USB drive
    Start OSX Mountain (Lion) or Snow Leopard to prepare your USB Flash drive
    Make sure to backup the files that are already on your USB flash drive via Disk Utility in Mac OS X:
    Extract the zip file Install109.zip to your Mac OS x desktop Put USB drive in your Mac Open up Disk Utility. Click on your USB drive in the left sidebar. Click on the Erase tab in the middle. Choose “Mac OS X Extended (Journaled)” as the format, and give your drive a label (like “MAVERICKS USB”). Click on the Erase… button. Done! Leave Disk Utility open, as you’ll need it later. 6. Preparing your USB drive with 10.9
    This part is the most time consuming. Using a USB 3.0 flash drive will help things out quite a bit.
    Mount the DMG for Mavericks (will be called Mac OS X Install ESD on your desktop). Show hidden files by running the app ShowHiddenFiles in the folder Install109 - Util on your desktop. Click on Show Special Files (leave the app ShowHiddenFiles open we need this later). In the folder MAC OS X Install ESD right click on Basesystem.dmg and choose “ open with DiskImageMounter(default) Switch back to Disk Utility. Click on your flash drive in the left sidebar. Click on the Restore button in the middle area. For the source, drag “Mac OS X Base System” from your desktop into the empty Source box. For the destination, drag your USB drive from your desktop into the empty Destination box. Click on “Restore” and type your password. This process will take anywhere from 5 to 10 minutes depending on the speed of your flash drive. When it’s finished, you’ll end up with 2 “Mac OS X Base System” drives on your desktop. Figure out which one is your USB copy (you can right-click > Get Info and use the capacity as an indicator), and rename it to MAVERICKSUSB, after that open it up. Once you’ve opened up MAVERICKSUSB (the one that’s your flash drive), go to /System/Installation. You’ll see a symlink for Packages. Remove it. Create a folder called Packages. Open up a window of the original Mac OS X Install ESD drive and copy everything within Packages to the empty Packages folder on your USB drive. Done! 10.9 is now installed onto your USB drive. Now, we need to modify some of the files on it so that it will properly bootup on a PC. 7. Adding the fixed 10.9 files to the USB drive
    Now, we need to modify some of the files on your USB drive so that it will properly bootup on your PC.

    Open the folder “Instal109 - Kexts” on your Mac OS X desktop. Copy 3 .kext files (FakeSMC.kext, NullCPUPowerManagement.kext, EliottForceLegacyRTC.kext) to /System/Library/Extensions on your flash drive.
    NOTE: The 2 OSInstall files will allow you to install 10.9 onto an MBR-partitioned drive, if you install it on the entire hard disk skip step 3 and 4 an go further with step 5. Copy the OSInstall file to /System/Library/PrivateFrameworks/Install.framework/Frameworks/OSInstall.framework/Versions/A/, overwriting the file that’s already there. Copy the OSInstall.mpkg file to /System/Installation/Packages/, overwriting the file that’s already there. Go to the root of your USB drive and create a folder called "Extra". This is used to store configuration files for the chameleon boot loader Run the Chameleon installation package from Install - Utils. Make sure to install this package to your flash drive. Choose in the Chameleon setup for Customize, in the customize screen choose Modules – FileNVRAM ( we need this to make iMessage work) after that go further with the install of Chameleon. Run the Chameleon Wizard click the “SMBios” tab then click "Edit". Now there is a list of “Premade SMBioses”. Look through this list and choose for your Dell Optiplex 780 the iMac9.1.
    Click “Save As” and save it to the /Extra folder we created on the USB stick. Choose Tab Org.Chameleon.boot and set the follow options like in the image below. If the settings are like the image then Click “Save As” and save it to the /Extra folder we created on the USB stick. Copy mach_kernel from the Folder Install109 - Kernel and paste it into the root of your flash drive. Lastly, copy extracted folder (Install109) which you have extracted earlier from the zip file to the root of your flash drive. You’ll need this in Chapter 12 Eject all mounted drives (this is not necessary) Go to ShowHiddenFiles and click hide special files after that close program. Eject your USB Drive Done ! 8. Bios Settings Dell Optiplex 780
    Before we boot from the Dell Optiplex we need to optimize the bios for OSX Mavericks.
    Start your Dell Optiplex and press F2 to get into the Bios. Go to Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting. Go then to Drives - Sata Operation and choose on the right for Raid Autodetect/AHCI click again on apply and choose exit, now the Bios is ready for installing OSX Mavericks. 9. Installing OSX Mavericks from your USB drive
    Time for the fun stuff! We’ll now boot from your USB drive and install OSX Mavericks onto the partition or Hard Drive.
    Boot from your USB drive. Once in Chameleon let the boot loader resume (or hit enter to start it manually highlight your flash drive and add -v -f to the end, then push enter. You’ll see a lot of text fly by be patience startup may take a while.) Once you get into the installer (assuming your computer didn’t freeze, restart itself, or get a kernel panic), choose your partition or Hard Disk to install OSX Mavericks to. NOTE : when you install it on a partition skip step 5 - 10 see Chapter 4.
    (If you install Mavericks on the entire Hard disk follow the steps below ) In the installer open up Disk Utility. Click on your Hard Drive in the left sidebar. Click on the Erase tab in the middle. Choose “Mac OS X Extended (Journaled)” as the format, and give your drive a label (like “MAVERICKS”). Click on the Erase… button. Done close Disk Utility and go further with the installation process. The installation process will take about 5 to 15 minutes, depending on the speed of both your USB drive and your SSD or HDD. When finished boot to your new OSX Mavericks. 10. Booting OSX Mavericks!
    Now that everything is finally prepared, you can go ahead and boot into OSX Mavericks.
    Boot from your USB drive again your computer won't still be able to boot from the hard drive. 2. Once in Chameleon let the boot loader resume (or hit enter to start it manually highlight your flash drive and add -v -f to the end, then push enter. You’ll see a lot of text fly by be patience startup may take a while.) You’ll eventually get to the setup screens for OSX Mavericks. Go through that process to setup OSX Mavericks. Choose by "How Do You Connect" for "My Computer Does Not Connect to the Internet" we will fix this later in Chapter 12, go further with the installation process. The installation process will take about 3 minutes. Done! Proceed to Chapter 11 to install the bootloader to your partition so that you don’t have to rely on using your USB drive to bootup. 11. Installing the bootloader to 10.9
    Once in 10.9 go to finder – preferences –General and choose in show these items on the desktop for
    - Hard Disk
    - External Disk
    - CD Go also to System Preferences – Security& Privacy click on the lock on the left corner and type your password Choose by “Allow applications downloaded from: for “Anywhere – Allow from anywhere Close system preferences. Navigate to your folder Install109 -Utils and run the chameleon package, install it to your OS X drive. Copy the Extra folder on your USB drive to the root of your HDD (open Finder -> Go -> Computer -> OS X -> paste folder). Done! 12. Install the Kext files for de Dell Optiplex 780 hardware
    Now, we need to install some Kext files on your Hard Disk drive so that the hardware will work properly on your PC. Open the folder “Install109 - Kexts” and select the following Kext files
    - AppelIntelE1000e.kext
    - EliottForceLegacyRTC.kext
    - FakeSMC.kext
    - NullCPUPowerManagement.kext
    - VoodooHDA.kext Drag the Kext files (which are mentioned above) over "Kext utility.app" (contained in folder “Install780”) and release the mouse Type your root password and the Kext files will be installed on your Hard disk. Reboot. Once in OSX Mavericks go to System Preferences – Network There will be a message saying “Network device is detected” Choose apply if you want to use DHCP or give a IP Address if you use static IP. Click apply to make the setting active. 13. Installing Video for QE/CI Manually
    Copy the Kext files AMD5000Controller.kext and AMDRadeonX3000.kext from system/library/extension to your desktop. Go to AMD5000Controller.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>IOPCIMatch</key> and add your string for HD5450
    ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002)
    <string>0x68F91002 0x68981002 0x68991002 0x68E01002 0x68E11002 0x68D81002 0x68C01002 0x68C11002 0x68D91002 0x68B81002 0x68B01002 0x68B11002 0x68A01002 0x68A11002 </string> Save and Exit Go to AMDRadeonX3000.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>AMDCedarGraphicsAccelerator</key>
    and then look for the first <key>IOPCIMatch</key> and add your string for HD5450
    ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002)
    add <string>0x68F91002 0x68E01002</string> Save and Exit Install both kext files with Kext Utility Now reboot. After Reboot the video card must be working with QE/CI. 14. Update to 10.9.2
    Don't update thru Software Update download the combo update here Download from the apple site. Run the 10.9.2 combo update walk thru the steps. After installation there will be a message saying to restart your system, CHOOSE RESTART. The Combo Update will be installed on the system and will take about 10 minutes After the install the system boots up normally but video isn't working anymore we will fix this manually like in chapter 13 Copy the Kext files AMD5000Controller.kext and AMDRadeonX3000.kext from system/library/extension to your desktop. Go to AMD5000Controller.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>IOPCIMatch</key> and add your string for HD5450
    ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002)
    <string>0x68F91002 0x68981002 0x68991002 0x68E01002 0x68E11002 0x68D81002 0x68C01002 0x68C11002 0x68D91002 0x68B81002 0x68B01002 0x68B11002 0x68A01002 0x68A11002 </string> Save and Exit Go to AMDRadeonX3000.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>AMDCedarGraphicsAccelerator</key>
    and then look for the first <key>IOPCIMatch</key> and add your string for HD5450
    ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002)
    add <string>0x68F91002 0x68E01002</string> Save and Exit Install both kext files with Kext Utility Now reboot. After Reboot go to about this Mac and check if the version is 10.9.2 The update is finished. TROUBLESHOOTING
    14. BOOT 0 ERROR
    If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following
    Reboot system back into Mavericks installer (USB)FLASH DRIVE). Run Disk Utility find the Disk Identifier (eg. disk0s2). Unmount the drive you installed Mavericks on Launch Terminal and execute the following command: dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2 Exit Terminal Boot Normally 15. App store and iCloud doesn't work
    If AppStore and iCloud doesn't work follow the steps below.
    Open up EFI Studio in folder “Install109 - Utils.” , select Ethernet, select Add Device. On the new window you will see a lot of numbers (Hex String) in the second row. Then clicked write to com.apple.boot.plist. Then go to /Library/Preferences/SystemConfiguration/apple.com.boot.plist and select the new key and string it added. Now you can add the Hex Strings to your org.chameleon.boot.plist(com.apple.boot.plist) see Chapter 12 which should be in root/extra folder. When you add it manually make sure it is in <key>device-properties</key> <string>Your Hex String here</string> arguments after that. Remove all network devices from System Preferences/Network. Delete in library>preferences>system configuration> NetworkInterfaces.plist file. Finally, Reboot. After reboot, go to System Preferences/Network add devices. Click (Ethernet) FIRST!! Then add the other adapters you use to connect to the internet or Bluetooth. Voila. App Store and iCloud now works. 16. iMessage Fix
    Hackintoshes have been unable to log into the Messages app (better known as "iMessage") on OS X Mountain Lion and Mavericks. We can now fix the problem using Chameleon bootloader.


    Run the Chameleon installation package from Install - Utils. Make sure to install this package to your HDD. Choose in the Chameleon setup for Customize, in the customize screen choose Modules – FileNVRAM after that go further with the install of Chameleon Finally, Reboot Voila. iMessage now works 17. If sound doesn’t work
    The HDMI from the Ati Radeon 5450 doesn’t work properly so we need to change this to Headphone, follow the step below to make sound work.
    Open System Preferences – Sound – Output – And choose for Headphones. 18. Finished!
    You’ve successfully installed OSX Mavericks onto your Dell Optiplex 780.
    run os x mavericks 10.9.pdf
  9. Like
    pepto got a reaction from faizfaris9 in [Guide] ML 10.8.X - Dell Optiplex 780 (760)   
    Updated 03 october 2013
    - Fixed correct links to files
    - Latest PDF version 2.4 with date 03 october 2013
    Updated 02 october 2013
    - Celebrating 1 year Mountain Lion tutorial 780
    - Added update 10.8.5 steps in the document
    - Videofix must be done manually
    - Latest PDF version 2.4 with date 02 october 2013
    Updated 16 June 2013
    - New Install780.zip with Old VoodooHDA.kext because of audio issues after reboot
    Updated 08 June 2013
    - Added update 10.8.4 steps in the document
    - Added new zip file Videofix1084.zip for update 10.8.4
    - New Install780.zip with new VoodooHDA.kext
    - Latest PDF version 2.3 with date 08 June 2013
    Updated 03 June 2013
    - Text changes in Chapters 6.11, 13.2 and 15.7
    - Added extra text in chapter 15 about skipping parts, depends on wich ML version you are using
    - Latest PDF version 2.2 with date 03 June 2013
    Updated 19 April 2013
    - Added update 10.8.3 steps in the document
    - Added new zip file Videofix1083.zip for update 10.8.3
    - Latest PDF version 2.1 with date 19 April 2013
    Updated 27 Februari 2013
    - Added version number of PDF Document and date stamp of modification
    - Latest PDF version 2.0 with date 27 Februari 2013
    Updated 18 december 2012
    - Some text changes in Chapter 13 about kext utility.app.
    - Thks goes to Pingu for the changes.
    Updated 22 october 2012
    - fixed correct links to Chapters 11.
    - Some text changes in Chapter 7,10,11 and 15.
    - Thks goes to julianarevalo for the changes.
    Updated 08 october 2012
    - fixed correct links to Chapters.
    - Add Numbers to Chapters.
    - Some text changes.
    - New uploaded PDF File.
     
    Run OSX Mountain Lion on a Dell Optiplex 780
    This tutorial will describe the steps to install Mountain Lion on a Dell Optiplex 780 (this will also works on a 760).
    The installation goes to the latest update 10.8.5, and when there is a new update i will change the tutorial as soon as possible.
    If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial.
    You can also see my configuration on the OSX86 Wiki Project Page.
    I have also included the PDF file of the guide and the zip files to install Mountain Lion.
     
    A special thanks goes to Brian from Tech Erra for using parts of their tutorial.
     
    I am from The Netherlands so sorry for my bad English.
     
     

     
    1. Credits/Sources
    Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide:
    Tech Erra OSX86 Wiki InsanelyMac OSX86.net Forum member Pingu from Germany for helping me out with the text changes. And all other forum members who have posted in my topic and helping out the community. 2. Requirements Here are the requirements:
    A Dell Optiplex 780 – This is necessary to install mountain lion for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OSX Lion. Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended.
    A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy of Mountain Lion 10.8 GM – If you don’t have a Mac Developer Account, then you’ll find torrents of 10.8 around the web. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.8 to – For me, I used a 160GB partition to install 10.8 to. An PCI Express Video Card – For use with QE and CI Highly recommended. I use a Ati Radeon HD5450 512MB but 1GB or 2GB also works. Boot780.zip – This ZIP file contains everything that you need to get your flash drive properly prepared. Install780.zip – This ZIP file contains everything that you need to get your Dell Optiplex Hardware to work with Mountain Lion OSX. Videofix1083.zip – This ZIP file contains kext files for the videofix in 10.8.3( see chapter 15). Videofix1084.zip – This ZIP file contains kext files for the videofix in 10.8.4( see chapter 16). Note: The files for number 8 Boot780.zip contains the following: FakeSMC.kext NullCPUPowerManagement.kext EliottForceLegacyRTC.kext OSInstall (Not used for my configuration because I use the entire hard disk) OSInstall.mpkg (Not used for my configuration because I use the entire hard disk) Chameleon_2.1svn_r1820_trunk_10.8.pkg ShowHiddenFiles.app Org.Chameleon.Boot.plist The first 3.kext files will fix most kernel panics and bios reset that you might experience while booting. The 2 OSInstall files will allow you to install 10.8 onto an MBR-partitioned drive. Lastly, the Chameleon package is the bootloader that we’ll be using, and has been specifically compiled for use with 10.8.
     
    Note: The files for number 9 Install780.zip contains the following:
    AMDRadeonAccelerator.kext AppelIntelE1000e.kext ATI5000Injector.kext EFIStudio-1.1.app EliottForceLegacyRTC.kext FakeSMC.kext Kext Utility.app NullCPUPowerManagement.kext VoodooHDA.kext Note: The files for number 10 and 11 Videofix1083.zip and Videofix1084.zip contains the following: AMDRadeonAccelerator.kext ATI5000Controller.kext 3. My Specs My installation was successfully done on an Dell Optiplex 780 Desktop computer with the following specs.
    NOTE: A PCI video card is recommended to use the full potential of OS of Mountain Lion because the on board video card doesn't support QE/CI.
    Intel Core 2 Duo E7500 @ 2.93GHz 4GB DDR3 1333Mhz RAM Western Digital 160GB HDD ATI RADEON HD5450 512MB Intel WG82567LM onboard network Bluetooth USB Cambridge silicon radio (works OOB) ADI 1984A HDA audio onboard HP W2207h Monitor 1680×1050 display Apple Magic Trackpad 4. Preparing your SSD or HDD for install on a MBR-partitioned drive If you intent to install OSX86 Mountain Lion On the same Hard disk as your windows follow the steps below.
    For a clean install on a new formatted hard disk go to Chapter 5.
    If you’re in Windows 7, you can easily make a new partition on an SSD or HDD via the Disk Managementprogram.
    Start>Run (or Windows key on your keyboard plus R). diskmgmt.msc (press enter after typing that) Find your drive, right-click on it, and go to Shrink Volume. Wait for it to calculate the amount of space you can make your partition, and enter in your amount (for an exact GB amount, multiple your desired amount of GB times 1024, so a 20GB partition would be 20480MB). Let it make your partition. It will show up as unallocated space. Format the new unallocated space as NTFS and give it a label (mine was ML). Done! 5. Formatting your USB drive Start OSX Lion or Snow Leopard to prepare your USB Flash drive
    Make sure to backup the files that are already on your USB flash drive via Disk Utility in Mac OS X:
    Extract both zip files (Boot780 and Install780) to your Mac OS x desktop Put USB drive in your Mac Open up Disk Utility. Click on your USB drive in the left sidebar. Click on the Erase tab in the middle. Choose “Mac OS X Extended (Journaled)” as the format, and give your drive a label (like “ML USB”). Click on the Erase… button. Done! Leave Disk Utility open, as you’ll need it later. 6. Preparing your USB drive with 10.8 This part is the most time consuming. Using a USB 3.0 flash drive will help things out quite a bit.
    Mount the DMG for Mountain Lion (will be called Mac OS X Install ESD on your desktop). Show hidden files by running the app ShowHiddenFiles in the folder Boot780 on your desktop. Click on Show Special Files (leave the app ShowHiddenFiles open we need this later). In the folder MAC OS X Install ESD right click on Basesystem.dmg and choose “ open with DiskImageMounter(default) Switch back to Disk Utility. Click on your flash drive in the left sidebar. Click on the Restore button in the middle area. For the source, drag “Mac OS X Base System” from your desktop into the empty Source box. For the destination, drag your USB drive from your desktop into the empty Destination box. Click on “Restore” and type your password. This process will take anywhere from 5 to 10 minutes depending on the speed of your flash drive. When it’s finished, you’ll end up with 2 “Mac OS X Base System” drives on your desktop. Figure out which one is your USB copy (you can right-click > Get Info and use the capacity as an indicator), and rename it to MLINSTALLUSB, after that open it up. Once you’ve opened up MLINSTALLUSB (the one that’s your flash drive), go to /System/Installation. You’ll see a symlink for Packages. Remove it. Create a folder called Packages. Open up a window of the original Mac OS X Install ESD drive and copy everything within Packages to the empty Packages folder on your USB drive. Done! 10.8 is now installed onto your USB drive. Now, we need to modify some of the files on it so that it will properly bootup on a PC. 7. Adding the fixed 10.8 files to the USB drive Now, we need to modify some of the files on your USB drive so that it will properly bootup on your PC.
    Open the folder “Boot780” on your Mac OS X desktop. Copy 2 .kext files (FakeSMC.kext, NullCPUPowerManagement.kext) to /System/Library/Extensions on your flash drive. NOTE: The 2 OSInstall files will allow you to install 10.8 onto an MBR-partitioned drive, if you install it on the entire hard disk skip step 3 and 4 an go further with step 5.
    Copy the OSInstall file to /System/Library/PrivateFrameworks/Install.framework/Frameworks/OSInstall.framework/Versions/A/, overwriting the file that’s already there. Copy the OSInstall.mpkg file to /System/Installation/Packages/, overwriting the file that’s already there. Run the Chameleon installation package. Make sure to install this package to your flash drive, and customize the installation so that you have an SMBIOS that best relates to the CPU that’s on your computer (leave the default options checked; just check your SMBIOS imac9.1 for the Dell Optiplex 780). Copy now 3 kext files (FakeSMC.kext, NullCPUPowerManagement.kext, EliottForceLegacyRTC.kext) from folder Boot780 to /extra/extensions on your flash drive we need this for Chapter 11, Booting 10.8! . Copy mach_kernel from the root of the Mac OS X Install ESD volume and paste it into the root of your flash drive. Lastly, copy extracted folders (Boot780 and Install780) which you have extracted earlier from the zip files to the root of your flash drive. You’ll need this in Chapter 11. Eject all mounted drives (this is not necessary) Go to ShowHiddenFiles and click hide special files after that close program. Eject your USB Drive Done ! 8. Bios Settings Dell Optiplex 780 Before we boot from the Dell Optiplex we need to optimize the bios for Mountain Lion.
    Start your Dell Optiplex and press F2 to get into the Bios. Go to Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting. Go then to Drives - Sata Operation and choose on the right for Raid Autodetect/AHCI click again on apply and choose exit, now the Bios is ready for installing Mountain Lion. 9. Installing 10.8 from your USB drive Time for the fun stuff! We’ll now boot from your USB drive and install 10.8 onto the partition or Hard Drive.
    Boot from your USB drive. Once in Chameleon, highlight your flash drive and add -v to the end, then push enter. You’ll see a lot of text fly by be patience startup may take a while. Once you get into the installer (assuming your computer didn’t freeze, restart itself, or get a kernel panic), choose your partition or Hard Disk to install 10.8 to. NOTE : when you install it on a partition skip step 5 - 10 see Chapter 4. (If you install Mountain Lion on the entire Hard disk follow the steps below )
    In the installer open up Disk Utility. Click on your Hard Drive in the left sidebar. Click on the Erase tab in the middle. Choose “Mac OS X Extended (Journaled)” as the format, and give your drive a label (like “ML OSX”). Click on the Erase… button. Done close Disk Utility and go further with the installation process. The installation process will take about 5 to 15 minutes, depending on the speed of both your USB drive and your SSD or HDD. When finished, boot back into your already working copy of Mac OS X. 10. Booting 10.8! Now that everything is finally prepared, you can go ahead and boot into Mountain Lion.
    Boot from your USB drive again your computer won't still be able to boot from the hard drive. Once in Chameleon, highlight your partition that has 10.8 installed. Add -v to it and push enter. You’ll see a lot of text fly by again be patience startup will take a while. You’ll eventually get to the setup screens for 10.8. Go through that process to setup 10.8. Choose by "How Do You Connect" for "My Computer Does Not Connect to the Internet" we will fix this later in Chapter 13, go further with the installation process. The installation process will take about 25 minutes, depending on the speed of both your USB drive and your SSD or HDD. Done! Proceed to Chapter 11 to install the bootloader to your partition so that you don’t have to rely on using your USB drive to bootup. 11. Installing the bootloader to 10.8 Once in 10.8 go to finder – preferences –General and choose in show these items on the desktop for - Hard Disk
    - External Disk
    - CD
    Go also to System Preferences – Security& Privacy click on the lock on the left corner and type your password Choose by “Allow applications downloaded from: for “Anywhere – Allow from anywhere Close system preferences. Copy the folders "Boot780" and "Install780" from your USB Device to your Mac OS X desktop after that open up the Chameleon installation package in folder Boot780, and install Chameleon to your 10.8 partition (while choosing your SMBIOS imac9.1, just like before, This is similar to step 5 in Chapter 7.) . Done! 12. Copy org.chameleon.boot.plist to /extra Starting up Mac OS X for the first time on your Hackintosh can be a very tricky process, which often requires you to set special boot options through the use of boot flags. For those of you who don't know, boot flags are "arguments" (pieces of data that you enter) to change the way that your bootloader runs. The bootloader is the program that boots Mac OS X. Boot flags can set the boot options for Chameleon, and any other boot CD or bootloader for Hackintoshes. Read past the break to learn how to use boot flags.
     
    There are two ways to apply a boot flag: either by typing it into the bootloader before starting up Mac OS X, or by typing it into org.Chameleon.boot.plist, the settings file used by the bootloader.
    See also Chapter Common boot options for Chameleon.
    I have included a org.Chameleon.Boot.Plist for the Dell Optiplex 780
    Open the folder “Boot780.” and copy org.chameleon.Boot.Plist Past org.chameleon.Boot.Plist to /extra on your Hard Disk 13. Install the Kext files for de Dell Optiplex 780 hardware Now, we need to install some Kext files on your Hard Disk drive so that the hardware will work properly on your PC. Open the folder “Install780” and select the following Kext files - AMDRadeonAccelerator.kext
    - AppelIntelE1000e.kext
    - ATI5000Injector.kext
    - EliottForceLegacyRTC.kext
    - FakeSMC.kext
    - NullCPUPowerManagement.kext
    - VoodooHDA.kext
    Drag the Kext files (which are mentioned above) over "Kext utility.app" (contained in folder “Install780”) and release the mouse Type your root password and the Kext files will be installed on your Hard disk. Reboot. Once in 10.8 go to System Preferences – Network There will be a message saying “Network device is detected” Choose apply if you want to use DHCP or give a IP Address if you use static IP. Click apply to make the setting active. 14. Update to 10.8.2 Don't update thru Software Update download the combo update here Download from the apple site. Run the 10.8.2 combo update walk thru the steps. After installation there will be a message saying to restart your system DON’T RESTART. We will fix the video after the update, go to folder Install780 on your desktop. Drag the Kext files AMDRadeonAccelerator.kext and ATI5000Injector.kext to Kext Utility and type your password the files will be installed, after install reboot. Now reboot with -v. After Reboot go to about this Mac and check if the version is 10.8.2 The update is finished. 15. Update to 10.8.3 If your "Mac OS X Install ESD" contains already the newest ML Version you don't have to update the system and you can skip step 15.1 to 15.5.
    To check your current version go to "About this Mac".
    Don't update thru Software Update download the combo update here Download from the apple site. Unpack the Videofix1083.zip to your desktop. Run the 10.8.3 combo update walk thru the steps. After installation there will be a message saying to restart your system DON’T RESTART. Run the Chameleon installation package. Make sure to install this package to your Hard drive, and customize the installation so that you have an SMBIOS that best relates to the CPU that’s on your computer (leave the default options checked; just check your SMBIOS imac9.1 for the Dell Optiplex 780). We will also fix the video, go to folder Videofix1083 on your desktop. Drag the Kext files AMDRadeonAccelerator.kext and ATI5000Controller.kext from the Videofix1083 directory to Kext Utility (in folder Install780) and type your password the files will be installed, after install reboot. Now reboot with -v. After Reboot go to about this Mac and check if the version is 10.8.3 The update is finished. 16. Update to 10.8.4 If your "Mac OS X Install ESD" contains already the newest ML Version you don't have to update the system and you can skip step 15.1 to 15.5.
    To check your current version go to "About this Mac".
    Don't update thru Software Update download the combo update here Download from the apple site. Unpack the Videofix1084.zip to your desktop. Run the 10.8.4 combo update walk thru the steps. After installation there will be a message saying to restart your system DON’T RESTART. Run the Chameleon installation package. Make sure to install this package to your Hard drive, and customize the installation so that you have an SMBIOS that best relates to the CPU that’s on your computer (leave the default options checked; just check your SMBIOS imac9.1 for the Dell Optiplex 780). We will also fix the video, go to folder Videofix1084 on your desktop. Drag the Kext files AMDRadeonAccelerator.kext and ATI5000Controller.kext from the Videofix1084 directory to Kext Utility (in folder Install780) and type your password the files will be installed, after install reboot. Now reboot with -v. After Reboot go to about this Mac and check if the version is 10.8.4 The update is finished. 16. Update to 10.8.5 If your "Mac OS X Install ESD" contains already the newest ML Version you don't have to update the system and you can skip this step.
    To check your current version go to "About this Mac".
    Don't update thru Software Update download the combo update here Download from the apple site. Run the 10.8.5 combo update walk thru the steps. After installation there will be a message saying to restart your system DON’T RESTART. Run the Chameleon installation package. Make sure to install this package to your Hard drive, and customize the installation so that you have an SMBIOS that best relates to the CPU that’s on your computer (leave the default options checked; just check your SMBIOS imac9.1 for the Dell Optiplex 780). We will also fix the video, we will do it manually. Copy the Kext files AMDRadeonAccelerator.kext and ATI5000Controller.kext from system/library/extension to your desktop. Go to ATI5000Controller.kext and rightclick and choose Show Package Contents and open info.plist with textedit. Find <key>IOPCIMatch</key> and add your string for HD5450 ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002)
    <string>0x68F91002 0x68981002 0x68991002 0x68E01002 0x68E11002 0x68D81002 0x68C01002 0x68C11002 0x68D91002 0x68B81002 0x68B01002 0x68B11002 0x68A01002 0x68A11002 </string>
    Save and Exit Go to AMDRadeonAccelerator.kext and rightclick and choose Show Package Contents and open info.plist with textedit. 11. Find <key>AMDCedarGraphicsAccelerator</key> and then look for the first <key>IOPCIMatch</key> and add your string for HD5450
    ( HD5450 1GB the string is 0x68F91002 and for 512MB the string is 0x68E11002)
    add <string>0x68F91002 0x68E01002</string>
    Save and Exit Install both kext files with Kext Utility Now reboot with -v. After Reboot go to about this Mac and check if the version is 10.8.4 The update is finished. 17. App store and iCloud doesn't work If AppStore and iCloud doesn't work follow the steps below.
    Open up EFI Studio in folder “Install780.” , select Ethernet, select Add Device. On the new window you will see a lot of numbers (Hex String) in the second row. Then clicked write to com.apple.boot.plist. Then go to /Library/Preferences/SystemConfiguration/apple.com.boot.plist and select the new key and string it added. Now you can add the Hex Strings to your org.chameleon.boot.plist(com.apple.boot.plist) see Chapter 12 which should be in root/extra folder. When you add it manually make sure it is in <key>device-properties</key> <string>Your Hex String here</string> arguments after that. Remove all network devices from System Preferences/Network. Delete in library>preferences>system configuration> NetworkInterfaces.plist file. Finally, Reboot. After reboot, go to System Preferences/Network add devices. Click (Ethernet) FIRST!! Then add the other adapters you use to connect to the internet or Bluetooth. Voila. App Store and iCloud now works. 18. If sound doesn’t work The HDMI from the Ati Radeon 5450 doesn’t work properly so we need to change this to Headphone, follow the step below to make sound work.
    Open System Preferences – Sound – Output – And choose for Headphones. 19. Finished! You’ve successfully installed Mountain Lion OSX onto your Dell Optiplex 780.
    Boot780.zip
    Install780.zip
    run os x mountain lion 10.8.pdf
  10. Like
    pepto got a reaction from kmorope in [GUIDE] Run macOS Sierra on a Dell Latitude E6320   
    Hervé i have now used your DSDT i works ok and i have it included in the new zip file for installation. Thanks for that.
  11. Like
    pepto got a reaction from Allan in [GUIDE] Run macOS Sierra on a Dell Latitude E6320   
    Run macOS Sierra on a Dell Latitude E6320
     
    NO ONE IN THIS FORUM (INCLUDING ME) IS RESPONSIBLE FOR ANY LOSS (DATA, MATERIAL, EQUIPMENT…) OCCURRED TO YOU, YOU ARE THE ONLY ONE RESPONSIBLE, AND BY FOLLOWING THESE INSTRUCTIONS YOU AGREE TO TAKE ALL THE RISKS AND RESPONSIBILITIES. THIS INSTALLATION ISN'T WITHOUT RISKS SO TAKE ALL THE PRECAUTIONS BEFORE DOING ANY FOOLISH ACTION, BACKUP YOUR DATA!
    This tutorial will describe the steps to install macOS Sierra on a Dell Latitude E6320 i5 2520M.
    If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial.

    A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial

    I am from The Netherlands so sorry for my bad English.


    1. Credits/Sources
    Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide:
    OSX Latitude.com Tech Erra OSX86 Wiki InsanelyMac Forum member Jake Lo from OSXLatitude.com for helping me out with installing. Morpheousman and Polyzargon from InsanelyMac who helping me with my other topics. (Dell 780) MacPeet, Chris1111 and all other forum members who helping out the community. A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial. And Hervé from insanelymac for using is modified DSDT.aml for E6320
    2. Requirements
    Here are the requirements:
    A Dell Latitude E6320 – This is necessary to install macOS Sierra for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OSX El Capitan, Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy of macOS Sierra – The method used by this guide requires that you have a copy of the macOS Sierra Installation app, wich is available for free from the Mac App Store. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.12 to – For me, I used a 500GB HDD to install 10.12 to. An Wireless N Nano USB Adaptor – For use with wifi Highly recommended. I use a TP-LINK TL-WN725N adaptor. E6320_V2.zip – This ZIP file contains everything that you need to get your flash drive properly prepared. 3. My Specs
    My installation was successfully done on an Dell Latitude E6320 i5-2520M laptop computer with the following specs.
    Intel Core i5-2520M @ 2.5GHz, 3MB cache, Dual Core 4GB DDR3 1333Mhz RAM Western Digital 250GB HDD INTEL HD3000 Video Intel 825xx onboard network Dell wireless 375 Bluetooth 3.0 onboard (works OOB) IDT 92HDxxx HD audio onboard TL-WN725N Wireless N Nano USB Adaptor Apple Magic Trackpad (only @home) Apple Wireless Keyboard US (only @home) Apple Magic Mouse 4. Download OS X Sierra
    Download macOS Sierra from the Mac App Store. Once macOS Sierra is downloaded, close the install pop-up that appears using Command (⌘)+Q. The application INSTALL macOS Sierra will appear in /Applications Done! 5. Prepare bootable USB Installer
    Note on flash drives: You will need a USB flash drive to make this work. Your USB should be at least 8GB and a USB 3.0 drive is preferred. Kingston sells an 8GB USB 3.0 drive for less than 10 euro.
    Now, we need to prepare the USB Drive so that it will properly bootup on your PC. Make sure that the disk you choose to use doesn't contain anything that you want to keep, because the following tutorial will purge everything on the drive.
    Open Finder - Applications and right-click on Install macOS Sierra and select Show Package Contents. Open Contents - Resources. Open a Terminal window thru Applications - Utilities - Terminal. In the Terminal window type sudo followed by a space. Drag the createinstallmedia file from the finder window opened in Step 4 to the Terminal Window. Type --volume followed by a space. Connect your USB drive and drag the USB drive into the Terminal Window. Type --applicationpath in the Terminal followed by a space. Open Finder - Applications and drag the Install macOS Sierra into the Terminal Window. Press Return on the keyboard to submit the full command. Type a 'Y' to continue when prompted to do so, and press Return on your keyboard The install process will begin by erasing the contents of your USB disk and copying the installer files to the USB disk. The entire process is quite lengthy; it can takes around 15-30 minutes, so you will need to show some patience 6. Installing Clover to the USB Disk
    Unpack the E6320.zip to your desktop or specified map you preferred. Open the map E6320 - Clover_v2.3k_r3726. DubbleClick on the Clover_v2.3k_r3726.pkg package file. Clover installation screen will be prompt. Click on Continue - Continue. Click on Change Install Location on the right bottom. Choose your USB Stick named Install macOS Sierra Public Beta click on Continue. Click on Customize on the left bottom. Choose Install Clover in the ESP Choose Bootloader : Install boot0af in MBR Choose in Clover EFI for CloverEFI 64- Bits SATA At last choose Install RC Scripts on target volume Click after that on Install. Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder. 7. Prepare USB stick for the Dell E6320
    Now, we need to prepare the USB Drive so that it will properly bootup on your Laptop.
    Go to map where you have unpacked the E6320 zip file there you will find a map called EFI. Copy the map EFI and go to your EFI partition thru Finder. Paste the EFI folder in the EFI partition and replace everything. Done your USB Stick is ready to boot macOS Sierra installer. 8. Bios Settings Dell Latitude E6320
    Before we boot from the Dell Latitude we need to optimize the bios for OSX Sierra
    Start your Dell Latitude and press F2 to get into the Bios. In the main screen click on "Load Defaults", the bios will be reset to default settings. Go to General - Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting. Go then to System Configuration - SATA Operation and choose on the right for AHCI click again on apply and choose exit, now the Bios is ready for installing OSX Sierra. 9. Installing OSX Sierra from your USB drive
    Time for the fun stuff! We’ll now boot from your USB drive and install macOS Sierra onto the Hard Drive.
    Using a USB 4G flash drive will help things out quite a bit.
    Power on unit while tapping F12 Key to choose boot device, select USB device. When Clover boot screen is visible, choose boot "Install macOS from Sierra USB Installer". Choose you desired language and click on the arrow, the macOS Utilities screen will appear. For a new installation of macOS, you must erase and format the destination drive according to the following steps before continuing. If you are upgrading from Mavericks , Yosemite or El Capitan and you want to keep your files and apps, skip steps 1-9. (NOT TESTED IN SIERRA)
    Choose in the macOS utilities for Disk Utility and click Continue. Disk Utility will be opened, highlight your target drive for macOS Sierra installation in the left column. Click ERASE button on top. Under Name: Type Sierra or any other name. Under Format: Choose Mac OS Extended (Journaled). Under Scheme: Choose GUID Partition Map. Click Erase. Click on Done. Close Disk Utility you will be prompted to the macOS Utilities screen. In the macOS Utilities screen choose Install macOS and click 2x on Continue. Agree the license agreement and click again on Agree When the installer asks you where to install macOS, choose your Sierra HDD click on Install. Sierra will be installed on the HDD, this will take about 6 - 15 minutes depending of your HDD. Upon completion, system will restart a 1st time. Press F12 key to choose the boot device. When the Clover Boot screen is visible, Choose "Boot macOS Install from Sierra". macOS will continue to Install the OS on your HDD this will take about 10 -25 minutes after that the installation will be finished and your laptop will reboot. 10. Booting for the first time macOS Sierra
    When the Clover Boot screen is visible, Choose "Boot MAC OS X from Sierra" You will eventually get to the setup screens for macOS Sierra. Go through the setup process to setup macOS Sierra. At the country selection choose your country and press continue. Select Your Keyboard choose ABC and press Continue. Choose at "How do i connect to the internet " ..."My Computer Does Not Connect to the Internet", we will fix this later, go further with the setup process and press continue. Choose at Transform Information To This Mac for "Don't Transfer any information now" click on Continue. At Enable Location Services for "Enable Location Services on this Mac" click Continue. Agree the Terms and Conditions. Create your Computer Account and uncheck "Set time zone based on current location" press Continue. Choose your Timezone and click Continue. At the Diagnostic screen click Continue. The setup process is ready, Done!. 11. Setting up your keyboard
    When the setup is finished the Keyboard Setup Assistent will appear. Press Continue to Identify Your Keyboard. You will ask to press some keys. After pressing some keys you will get the message Your Keyboard Cannot Be Identified, press OK. Choose at Select the Keyboard Type for ANSI (United States and others) Press Done your Keyboard is setup 12. Adjust some settings in macOS 10.12
    Once in 10.12 go to Finder – Preferences – General and choose in show these items on the desktop for Hard Disk External Disk Go to tab Sidebar and choose your desired Favorites, Shared and Devices. Close the Finder Preferences. 13. Change Security & Privacy for 3rd party software
    Start Terminal choose GO - Utilities - Terminal. In Terminal type sudo spctl --assess --master-disable followed by password to activate the option in Security & Policy "Allow apps downloaded from" Anywhere. Go to System Preferences – Security& Privacy and look of the option "Anywhere" is active if not activate the option. Close system preferences. 14. Revert HDD for proper boot.
    Launch Terminal and execute the following command: sudo diskutil corestorage revert / When prompt type your password. Exit Terminal and reboot again with your USB to macOS. 15. Installing Clover to the HD
    The steps 15 and 16 are the same as steps 6 and 7 but now we will install clover to the HDD of the E6320.
    Unpack the E6320.zip to your desktop or specified map you preferred. Open the map E6320 - Clover_v2.3k_r3726. DubbleClick on the Clover_v2.3k_r3726.pkg package file. Clover installation screen will be prompt. Click on Continue - Continue. Click on Change Install Location on the right bottom. Choose your HDD named Sierra click on Continue. Click on Customize on the left bottom. Choose Install Clover in the ESP Choose Bootloader : Install boot0af in MBR Choose in Clover EFI for CloverEFI 64- Bits SATA At last choose Install RC Scripts on target volume Click after that on Install, Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder. 16. Prepare HDD for booting the Dell E6320
    Now, we need to prepare the HDD Drive so that it will properly bootup on your PC.
    Go to map where you have unpacked the E6320 zip file there you will find a map called EFI.
    Copy the map EFI and go to your EFI partition thru Finder. Paste the EFI folder in the EFI partition and replace everything. Done your E6320 is ready to boot macOS Sierra. 17. Install Wlan driver for the TL-WN725N
    The wireless lan on the Dell E6320 doesn’t work, therefore I use a Wireless N USB Nano Adaptor from TP-LINK. The software is straight forward and installs without problems.
    Go to your E6320 folder which you have extracted to your HDD of your macOS Sierra. Open the map "beta driver for mac os X 10.11" . Run Installer_RTL.pkg Click Continue - Continue - Continue - Agree - Install Enter your Password and click Install Software - Continue Installation Click Restart to Reboot your Laptop. The first time you will get a kernel panic don't worry reboot again and the laptop will start macOS Sierra. Done! 18. What's working?
    Just about everything.

    19. Finished!
    You’ve successfully installed macOS Sierra onto your Dell Latitude E6320.

    TROUBLESHOOTING

    20. iMessage & FaceTime Fix
    You will need MLB and Rom numbers from a legit Mac device that is on the mac server.
    Run iMessage debug on a iMac, Macbook, etc and make a copy and paste of the Terminal output.
    Open Clover Configurator. Mount EFI Partition. Import config.plist from EFI/EFI/Clover (File , import configuration, browse to config.plist and select). In Clover Configurator Click on RT Variables, Enter Rom and MLB Values from iMessage output from valid iMac device. Save changes to config.plist. Reboot, Sign into iMessage. iMessage and FaceTime should now both be working.

    21. BOOT 0 Error
    If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following.
    Reboot system back into Sierra installer (USB)FLASH DRIVE). Run Disk Utility find the Disk Identifier (eg. disk0s2). Unmount the drive you installed Sierra on. Launch Terminal and execute the following command: dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2. Exit Terminal. Boot Normally. Run macOS Sierra 10.12 E6320.pdf
  12. Like
    pepto got a reaction from Allan in [GUIDE] Run macOS Sierra on a Dell Latitude E6320   
    Run macOS Sierra on a Dell Latitude E6320
     
    NO ONE IN THIS FORUM (INCLUDING ME) IS RESPONSIBLE FOR ANY LOSS (DATA, MATERIAL, EQUIPMENT…) OCCURRED TO YOU, YOU ARE THE ONLY ONE RESPONSIBLE, AND BY FOLLOWING THESE INSTRUCTIONS YOU AGREE TO TAKE ALL THE RISKS AND RESPONSIBILITIES. THIS INSTALLATION ISN'T WITHOUT RISKS SO TAKE ALL THE PRECAUTIONS BEFORE DOING ANY FOOLISH ACTION, BACKUP YOUR DATA!
    This tutorial will describe the steps to install macOS Sierra on a Dell Latitude E6320 i5 2520M.
    If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial.

    A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial

    I am from The Netherlands so sorry for my bad English.


    1. Credits/Sources
    Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide:
    OSX Latitude.com Tech Erra OSX86 Wiki InsanelyMac Forum member Jake Lo from OSXLatitude.com for helping me out with installing. Morpheousman and Polyzargon from InsanelyMac who helping me with my other topics. (Dell 780) MacPeet, Chris1111 and all other forum members who helping out the community. A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial. And Hervé from insanelymac for using is modified DSDT.aml for E6320
    2. Requirements
    Here are the requirements:
    A Dell Latitude E6320 – This is necessary to install macOS Sierra for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OSX El Capitan, Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy of macOS Sierra – The method used by this guide requires that you have a copy of the macOS Sierra Installation app, wich is available for free from the Mac App Store. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.12 to – For me, I used a 500GB HDD to install 10.12 to. An Wireless N Nano USB Adaptor – For use with wifi Highly recommended. I use a TP-LINK TL-WN725N adaptor. E6320_V2.zip – This ZIP file contains everything that you need to get your flash drive properly prepared. 3. My Specs
    My installation was successfully done on an Dell Latitude E6320 i5-2520M laptop computer with the following specs.
    Intel Core i5-2520M @ 2.5GHz, 3MB cache, Dual Core 4GB DDR3 1333Mhz RAM Western Digital 250GB HDD INTEL HD3000 Video Intel 825xx onboard network Dell wireless 375 Bluetooth 3.0 onboard (works OOB) IDT 92HDxxx HD audio onboard TL-WN725N Wireless N Nano USB Adaptor Apple Magic Trackpad (only @home) Apple Wireless Keyboard US (only @home) Apple Magic Mouse 4. Download OS X Sierra
    Download macOS Sierra from the Mac App Store. Once macOS Sierra is downloaded, close the install pop-up that appears using Command (⌘)+Q. The application INSTALL macOS Sierra will appear in /Applications Done! 5. Prepare bootable USB Installer
    Note on flash drives: You will need a USB flash drive to make this work. Your USB should be at least 8GB and a USB 3.0 drive is preferred. Kingston sells an 8GB USB 3.0 drive for less than 10 euro.
    Now, we need to prepare the USB Drive so that it will properly bootup on your PC. Make sure that the disk you choose to use doesn't contain anything that you want to keep, because the following tutorial will purge everything on the drive.
    Open Finder - Applications and right-click on Install macOS Sierra and select Show Package Contents. Open Contents - Resources. Open a Terminal window thru Applications - Utilities - Terminal. In the Terminal window type sudo followed by a space. Drag the createinstallmedia file from the finder window opened in Step 4 to the Terminal Window. Type --volume followed by a space. Connect your USB drive and drag the USB drive into the Terminal Window. Type --applicationpath in the Terminal followed by a space. Open Finder - Applications and drag the Install macOS Sierra into the Terminal Window. Press Return on the keyboard to submit the full command. Type a 'Y' to continue when prompted to do so, and press Return on your keyboard The install process will begin by erasing the contents of your USB disk and copying the installer files to the USB disk. The entire process is quite lengthy; it can takes around 15-30 minutes, so you will need to show some patience 6. Installing Clover to the USB Disk
    Unpack the E6320.zip to your desktop or specified map you preferred. Open the map E6320 - Clover_v2.3k_r3726. DubbleClick on the Clover_v2.3k_r3726.pkg package file. Clover installation screen will be prompt. Click on Continue - Continue. Click on Change Install Location on the right bottom. Choose your USB Stick named Install macOS Sierra Public Beta click on Continue. Click on Customize on the left bottom. Choose Install Clover in the ESP Choose Bootloader : Install boot0af in MBR Choose in Clover EFI for CloverEFI 64- Bits SATA At last choose Install RC Scripts on target volume Click after that on Install. Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder. 7. Prepare USB stick for the Dell E6320
    Now, we need to prepare the USB Drive so that it will properly bootup on your Laptop.
    Go to map where you have unpacked the E6320 zip file there you will find a map called EFI. Copy the map EFI and go to your EFI partition thru Finder. Paste the EFI folder in the EFI partition and replace everything. Done your USB Stick is ready to boot macOS Sierra installer. 8. Bios Settings Dell Latitude E6320
    Before we boot from the Dell Latitude we need to optimize the bios for OSX Sierra
    Start your Dell Latitude and press F2 to get into the Bios. In the main screen click on "Load Defaults", the bios will be reset to default settings. Go to General - Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting. Go then to System Configuration - SATA Operation and choose on the right for AHCI click again on apply and choose exit, now the Bios is ready for installing OSX Sierra. 9. Installing OSX Sierra from your USB drive
    Time for the fun stuff! We’ll now boot from your USB drive and install macOS Sierra onto the Hard Drive.
    Using a USB 4G flash drive will help things out quite a bit.
    Power on unit while tapping F12 Key to choose boot device, select USB device. When Clover boot screen is visible, choose boot "Install macOS from Sierra USB Installer". Choose you desired language and click on the arrow, the macOS Utilities screen will appear. For a new installation of macOS, you must erase and format the destination drive according to the following steps before continuing. If you are upgrading from Mavericks , Yosemite or El Capitan and you want to keep your files and apps, skip steps 1-9. (NOT TESTED IN SIERRA)
    Choose in the macOS utilities for Disk Utility and click Continue. Disk Utility will be opened, highlight your target drive for macOS Sierra installation in the left column. Click ERASE button on top. Under Name: Type Sierra or any other name. Under Format: Choose Mac OS Extended (Journaled). Under Scheme: Choose GUID Partition Map. Click Erase. Click on Done. Close Disk Utility you will be prompted to the macOS Utilities screen. In the macOS Utilities screen choose Install macOS and click 2x on Continue. Agree the license agreement and click again on Agree When the installer asks you where to install macOS, choose your Sierra HDD click on Install. Sierra will be installed on the HDD, this will take about 6 - 15 minutes depending of your HDD. Upon completion, system will restart a 1st time. Press F12 key to choose the boot device. When the Clover Boot screen is visible, Choose "Boot macOS Install from Sierra". macOS will continue to Install the OS on your HDD this will take about 10 -25 minutes after that the installation will be finished and your laptop will reboot. 10. Booting for the first time macOS Sierra
    When the Clover Boot screen is visible, Choose "Boot MAC OS X from Sierra" You will eventually get to the setup screens for macOS Sierra. Go through the setup process to setup macOS Sierra. At the country selection choose your country and press continue. Select Your Keyboard choose ABC and press Continue. Choose at "How do i connect to the internet " ..."My Computer Does Not Connect to the Internet", we will fix this later, go further with the setup process and press continue. Choose at Transform Information To This Mac for "Don't Transfer any information now" click on Continue. At Enable Location Services for "Enable Location Services on this Mac" click Continue. Agree the Terms and Conditions. Create your Computer Account and uncheck "Set time zone based on current location" press Continue. Choose your Timezone and click Continue. At the Diagnostic screen click Continue. The setup process is ready, Done!. 11. Setting up your keyboard
    When the setup is finished the Keyboard Setup Assistent will appear. Press Continue to Identify Your Keyboard. You will ask to press some keys. After pressing some keys you will get the message Your Keyboard Cannot Be Identified, press OK. Choose at Select the Keyboard Type for ANSI (United States and others) Press Done your Keyboard is setup 12. Adjust some settings in macOS 10.12
    Once in 10.12 go to Finder – Preferences – General and choose in show these items on the desktop for Hard Disk External Disk Go to tab Sidebar and choose your desired Favorites, Shared and Devices. Close the Finder Preferences. 13. Change Security & Privacy for 3rd party software
    Start Terminal choose GO - Utilities - Terminal. In Terminal type sudo spctl --assess --master-disable followed by password to activate the option in Security & Policy "Allow apps downloaded from" Anywhere. Go to System Preferences – Security& Privacy and look of the option "Anywhere" is active if not activate the option. Close system preferences. 14. Revert HDD for proper boot.
    Launch Terminal and execute the following command: sudo diskutil corestorage revert / When prompt type your password. Exit Terminal and reboot again with your USB to macOS. 15. Installing Clover to the HD
    The steps 15 and 16 are the same as steps 6 and 7 but now we will install clover to the HDD of the E6320.
    Unpack the E6320.zip to your desktop or specified map you preferred. Open the map E6320 - Clover_v2.3k_r3726. DubbleClick on the Clover_v2.3k_r3726.pkg package file. Clover installation screen will be prompt. Click on Continue - Continue. Click on Change Install Location on the right bottom. Choose your HDD named Sierra click on Continue. Click on Customize on the left bottom. Choose Install Clover in the ESP Choose Bootloader : Install boot0af in MBR Choose in Clover EFI for CloverEFI 64- Bits SATA At last choose Install RC Scripts on target volume Click after that on Install, Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder. 16. Prepare HDD for booting the Dell E6320
    Now, we need to prepare the HDD Drive so that it will properly bootup on your PC.
    Go to map where you have unpacked the E6320 zip file there you will find a map called EFI.
    Copy the map EFI and go to your EFI partition thru Finder. Paste the EFI folder in the EFI partition and replace everything. Done your E6320 is ready to boot macOS Sierra. 17. Install Wlan driver for the TL-WN725N
    The wireless lan on the Dell E6320 doesn’t work, therefore I use a Wireless N USB Nano Adaptor from TP-LINK. The software is straight forward and installs without problems.
    Go to your E6320 folder which you have extracted to your HDD of your macOS Sierra. Open the map "beta driver for mac os X 10.11" . Run Installer_RTL.pkg Click Continue - Continue - Continue - Agree - Install Enter your Password and click Install Software - Continue Installation Click Restart to Reboot your Laptop. The first time you will get a kernel panic don't worry reboot again and the laptop will start macOS Sierra. Done! 18. What's working?
    Just about everything.

    19. Finished!
    You’ve successfully installed macOS Sierra onto your Dell Latitude E6320.

    TROUBLESHOOTING

    20. iMessage & FaceTime Fix
    You will need MLB and Rom numbers from a legit Mac device that is on the mac server.
    Run iMessage debug on a iMac, Macbook, etc and make a copy and paste of the Terminal output.
    Open Clover Configurator. Mount EFI Partition. Import config.plist from EFI/EFI/Clover (File , import configuration, browse to config.plist and select). In Clover Configurator Click on RT Variables, Enter Rom and MLB Values from iMessage output from valid iMac device. Save changes to config.plist. Reboot, Sign into iMessage. iMessage and FaceTime should now both be working.

    21. BOOT 0 Error
    If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following.
    Reboot system back into Sierra installer (USB)FLASH DRIVE). Run Disk Utility find the Disk Identifier (eg. disk0s2). Unmount the drive you installed Sierra on. Launch Terminal and execute the following command: dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2. Exit Terminal. Boot Normally. Run macOS Sierra 10.12 E6320.pdf
  13. Like
    pepto got a reaction from Allan in [GUIDE] Run macOS Sierra on a Dell Latitude E6320   
    Run macOS Sierra on a Dell Latitude E6320
     
    NO ONE IN THIS FORUM (INCLUDING ME) IS RESPONSIBLE FOR ANY LOSS (DATA, MATERIAL, EQUIPMENT…) OCCURRED TO YOU, YOU ARE THE ONLY ONE RESPONSIBLE, AND BY FOLLOWING THESE INSTRUCTIONS YOU AGREE TO TAKE ALL THE RISKS AND RESPONSIBILITIES. THIS INSTALLATION ISN'T WITHOUT RISKS SO TAKE ALL THE PRECAUTIONS BEFORE DOING ANY FOOLISH ACTION, BACKUP YOUR DATA!
    This tutorial will describe the steps to install macOS Sierra on a Dell Latitude E6320 i5 2520M.
    If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial.

    A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial

    I am from The Netherlands so sorry for my bad English.


    1. Credits/Sources
    Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide:
    OSX Latitude.com Tech Erra OSX86 Wiki InsanelyMac Forum member Jake Lo from OSXLatitude.com for helping me out with installing. Morpheousman and Polyzargon from InsanelyMac who helping me with my other topics. (Dell 780) MacPeet, Chris1111 and all other forum members who helping out the community. A special thanks goes to Brian from Tech Erra, 9 to 5 Mac and Morpheousman for using parts of their tutorial. And Hervé from insanelymac for using is modified DSDT.aml for E6320
    2. Requirements
    Here are the requirements:
    A Dell Latitude E6320 – This is necessary to install macOS Sierra for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OSX El Capitan, Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy of macOS Sierra – The method used by this guide requires that you have a copy of the macOS Sierra Installation app, wich is available for free from the Mac App Store. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.12 to – For me, I used a 500GB HDD to install 10.12 to. An Wireless N Nano USB Adaptor – For use with wifi Highly recommended. I use a TP-LINK TL-WN725N adaptor. E6320_V2.zip – This ZIP file contains everything that you need to get your flash drive properly prepared. 3. My Specs
    My installation was successfully done on an Dell Latitude E6320 i5-2520M laptop computer with the following specs.
    Intel Core i5-2520M @ 2.5GHz, 3MB cache, Dual Core 4GB DDR3 1333Mhz RAM Western Digital 250GB HDD INTEL HD3000 Video Intel 825xx onboard network Dell wireless 375 Bluetooth 3.0 onboard (works OOB) IDT 92HDxxx HD audio onboard TL-WN725N Wireless N Nano USB Adaptor Apple Magic Trackpad (only @home) Apple Wireless Keyboard US (only @home) Apple Magic Mouse 4. Download OS X Sierra
    Download macOS Sierra from the Mac App Store. Once macOS Sierra is downloaded, close the install pop-up that appears using Command (⌘)+Q. The application INSTALL macOS Sierra will appear in /Applications Done! 5. Prepare bootable USB Installer
    Note on flash drives: You will need a USB flash drive to make this work. Your USB should be at least 8GB and a USB 3.0 drive is preferred. Kingston sells an 8GB USB 3.0 drive for less than 10 euro.
    Now, we need to prepare the USB Drive so that it will properly bootup on your PC. Make sure that the disk you choose to use doesn't contain anything that you want to keep, because the following tutorial will purge everything on the drive.
    Open Finder - Applications and right-click on Install macOS Sierra and select Show Package Contents. Open Contents - Resources. Open a Terminal window thru Applications - Utilities - Terminal. In the Terminal window type sudo followed by a space. Drag the createinstallmedia file from the finder window opened in Step 4 to the Terminal Window. Type --volume followed by a space. Connect your USB drive and drag the USB drive into the Terminal Window. Type --applicationpath in the Terminal followed by a space. Open Finder - Applications and drag the Install macOS Sierra into the Terminal Window. Press Return on the keyboard to submit the full command. Type a 'Y' to continue when prompted to do so, and press Return on your keyboard The install process will begin by erasing the contents of your USB disk and copying the installer files to the USB disk. The entire process is quite lengthy; it can takes around 15-30 minutes, so you will need to show some patience 6. Installing Clover to the USB Disk
    Unpack the E6320.zip to your desktop or specified map you preferred. Open the map E6320 - Clover_v2.3k_r3726. DubbleClick on the Clover_v2.3k_r3726.pkg package file. Clover installation screen will be prompt. Click on Continue - Continue. Click on Change Install Location on the right bottom. Choose your USB Stick named Install macOS Sierra Public Beta click on Continue. Click on Customize on the left bottom. Choose Install Clover in the ESP Choose Bootloader : Install boot0af in MBR Choose in Clover EFI for CloverEFI 64- Bits SATA At last choose Install RC Scripts on target volume Click after that on Install. Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder. 7. Prepare USB stick for the Dell E6320
    Now, we need to prepare the USB Drive so that it will properly bootup on your Laptop.
    Go to map where you have unpacked the E6320 zip file there you will find a map called EFI. Copy the map EFI and go to your EFI partition thru Finder. Paste the EFI folder in the EFI partition and replace everything. Done your USB Stick is ready to boot macOS Sierra installer. 8. Bios Settings Dell Latitude E6320
    Before we boot from the Dell Latitude we need to optimize the bios for OSX Sierra
    Start your Dell Latitude and press F2 to get into the Bios. In the main screen click on "Load Defaults", the bios will be reset to default settings. Go to General - Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting. Go then to System Configuration - SATA Operation and choose on the right for AHCI click again on apply and choose exit, now the Bios is ready for installing OSX Sierra. 9. Installing OSX Sierra from your USB drive
    Time for the fun stuff! We’ll now boot from your USB drive and install macOS Sierra onto the Hard Drive.
    Using a USB 4G flash drive will help things out quite a bit.
    Power on unit while tapping F12 Key to choose boot device, select USB device. When Clover boot screen is visible, choose boot "Install macOS from Sierra USB Installer". Choose you desired language and click on the arrow, the macOS Utilities screen will appear. For a new installation of macOS, you must erase and format the destination drive according to the following steps before continuing. If you are upgrading from Mavericks , Yosemite or El Capitan and you want to keep your files and apps, skip steps 1-9. (NOT TESTED IN SIERRA)
    Choose in the macOS utilities for Disk Utility and click Continue. Disk Utility will be opened, highlight your target drive for macOS Sierra installation in the left column. Click ERASE button on top. Under Name: Type Sierra or any other name. Under Format: Choose Mac OS Extended (Journaled). Under Scheme: Choose GUID Partition Map. Click Erase. Click on Done. Close Disk Utility you will be prompted to the macOS Utilities screen. In the macOS Utilities screen choose Install macOS and click 2x on Continue. Agree the license agreement and click again on Agree When the installer asks you where to install macOS, choose your Sierra HDD click on Install. Sierra will be installed on the HDD, this will take about 6 - 15 minutes depending of your HDD. Upon completion, system will restart a 1st time. Press F12 key to choose the boot device. When the Clover Boot screen is visible, Choose "Boot macOS Install from Sierra". macOS will continue to Install the OS on your HDD this will take about 10 -25 minutes after that the installation will be finished and your laptop will reboot. 10. Booting for the first time macOS Sierra
    When the Clover Boot screen is visible, Choose "Boot MAC OS X from Sierra" You will eventually get to the setup screens for macOS Sierra. Go through the setup process to setup macOS Sierra. At the country selection choose your country and press continue. Select Your Keyboard choose ABC and press Continue. Choose at "How do i connect to the internet " ..."My Computer Does Not Connect to the Internet", we will fix this later, go further with the setup process and press continue. Choose at Transform Information To This Mac for "Don't Transfer any information now" click on Continue. At Enable Location Services for "Enable Location Services on this Mac" click Continue. Agree the Terms and Conditions. Create your Computer Account and uncheck "Set time zone based on current location" press Continue. Choose your Timezone and click Continue. At the Diagnostic screen click Continue. The setup process is ready, Done!. 11. Setting up your keyboard
    When the setup is finished the Keyboard Setup Assistent will appear. Press Continue to Identify Your Keyboard. You will ask to press some keys. After pressing some keys you will get the message Your Keyboard Cannot Be Identified, press OK. Choose at Select the Keyboard Type for ANSI (United States and others) Press Done your Keyboard is setup 12. Adjust some settings in macOS 10.12
    Once in 10.12 go to Finder – Preferences – General and choose in show these items on the desktop for Hard Disk External Disk Go to tab Sidebar and choose your desired Favorites, Shared and Devices. Close the Finder Preferences. 13. Change Security & Privacy for 3rd party software
    Start Terminal choose GO - Utilities - Terminal. In Terminal type sudo spctl --assess --master-disable followed by password to activate the option in Security & Policy "Allow apps downloaded from" Anywhere. Go to System Preferences – Security& Privacy and look of the option "Anywhere" is active if not activate the option. Close system preferences. 14. Revert HDD for proper boot.
    Launch Terminal and execute the following command: sudo diskutil corestorage revert / When prompt type your password. Exit Terminal and reboot again with your USB to macOS. 15. Installing Clover to the HD
    The steps 15 and 16 are the same as steps 6 and 7 but now we will install clover to the HDD of the E6320.
    Unpack the E6320.zip to your desktop or specified map you preferred. Open the map E6320 - Clover_v2.3k_r3726. DubbleClick on the Clover_v2.3k_r3726.pkg package file. Clover installation screen will be prompt. Click on Continue - Continue. Click on Change Install Location on the right bottom. Choose your HDD named Sierra click on Continue. Click on Customize on the left bottom. Choose Install Clover in the ESP Choose Bootloader : Install boot0af in MBR Choose in Clover EFI for CloverEFI 64- Bits SATA At last choose Install RC Scripts on target volume Click after that on Install, Clover will installed on the EFI Partition on the USB after install you can see the EFI partition in Finder. 16. Prepare HDD for booting the Dell E6320
    Now, we need to prepare the HDD Drive so that it will properly bootup on your PC.
    Go to map where you have unpacked the E6320 zip file there you will find a map called EFI.
    Copy the map EFI and go to your EFI partition thru Finder. Paste the EFI folder in the EFI partition and replace everything. Done your E6320 is ready to boot macOS Sierra. 17. Install Wlan driver for the TL-WN725N
    The wireless lan on the Dell E6320 doesn’t work, therefore I use a Wireless N USB Nano Adaptor from TP-LINK. The software is straight forward and installs without problems.
    Go to your E6320 folder which you have extracted to your HDD of your macOS Sierra. Open the map "beta driver for mac os X 10.11" . Run Installer_RTL.pkg Click Continue - Continue - Continue - Agree - Install Enter your Password and click Install Software - Continue Installation Click Restart to Reboot your Laptop. The first time you will get a kernel panic don't worry reboot again and the laptop will start macOS Sierra. Done! 18. What's working?
    Just about everything.

    19. Finished!
    You’ve successfully installed macOS Sierra onto your Dell Latitude E6320.

    TROUBLESHOOTING

    20. iMessage & FaceTime Fix
    You will need MLB and Rom numbers from a legit Mac device that is on the mac server.
    Run iMessage debug on a iMac, Macbook, etc and make a copy and paste of the Terminal output.
    Open Clover Configurator. Mount EFI Partition. Import config.plist from EFI/EFI/Clover (File , import configuration, browse to config.plist and select). In Clover Configurator Click on RT Variables, Enter Rom and MLB Values from iMessage output from valid iMac device. Save changes to config.plist. Reboot, Sign into iMessage. iMessage and FaceTime should now both be working.

    21. BOOT 0 Error
    If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following.
    Reboot system back into Sierra installer (USB)FLASH DRIVE). Run Disk Utility find the Disk Identifier (eg. disk0s2). Unmount the drive you installed Sierra on. Launch Terminal and execute the following command: dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2. Exit Terminal. Boot Normally. Run macOS Sierra 10.12 E6320.pdf
  14. Like
    pepto got a reaction from polyzargone in [Guide] macOS Sierra 10.12 - Dell Optiplex 780 (760) (755) (790) (990)   
    Great to see that Sierra is also compatible with the  780, 760   I wil give it a try when i have some time. Today i was looking for sierra en how to install it but MacPeet has done a great job. Keep up the good work guys.
  15. Like
    pepto got a reaction from morpheousman in [GUIDE] Run OS X El Capitan on a Dell Latitude E6320   
    Run OS X El Capitan on a Dell Latitude E6320
    This tutorial will describe the steps to install OS X El Capitan on a Dell Latitude E6320 i5 2520M.
    If you find any mistakes or have something to improve then please send me a PM and i will update the tutorial.

    A special thanks goes to Brian from Tech Erra, Jake Lo from OSX Latitude.com and Morpheousman for using parts of their tutorial

    I am from The Netherlands so sorry for my bad English.


    1. Credits/Sources
    Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide:
    Tech Erra OSX86 Wiki InsanelyMac Forum member Jake Lo from OSX Latitude.com for helping me out with installing Morpheousman and Polyzargon from Insanelymac who helping me with my other topics. (Dell 780) MacPeet, Chris1111 and all other forum members who helping out the community. 2. Requirements
    Here are the requirements:
    A Dell Latitude E6320 i5 2520M – This is necessary to install OS X El Capitan for this tutorial A copy of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OS X Yosemite.
    Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 8GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (8GB or larger). A copy of OS X El Capitan – The method used by this guide requires that you have a copy of the OS X El Capitan Installation app, wich is available for free from the Mac App Store. 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.9 to – For me, I used a 250GB partition to install 10.9 to. An Wireless N Nano USB Adaptor – For use with wifi Highly recommended. I use a TP-LINK TL-WN725N adaptor. E6320.zip – This ZIP file contains everything that you need to get your flash drive properly prepared. 3. My Specs
    My installation was successfully done on an Dell Latitude E6320 i5 2520M Laptop computer with the following specs.
    NOTE: A Wireless N Nano USB Adaptor is recommended to use the full potential of OS Mavericks because the on board wifi doesn't work.
    - Intel Core i5-2520M @ 2.5GHz, 3MB cache, Dual Core - 4GB DDR3 1333Mhz RAM - Western Digital 250GB HDD - INTEL HD3000 Video - Intel 825xx onboard network - Bluetooth radio onboard (works OOB) - IDT 92HDxxx HD audio onboard - TL-WN725N Wireless N Nano USB Adaptor - Apple Magic Trackpad (only @home) - Apple Wireless Keyboard US (only @home) - Apple Magic Mouse 4. Download OS X El Capitan
    Start OS X Yosemite on a exsisting Mac or Hackintosh, to prepare your USB Flash drive.
    Make sure to backup the files that are already on your USB Flash drive thru disk Utility in Mac OS X.
    Open Mac App Store. Login with your Apple ID. Download OS X El Capitan Done! The application INSTALL OS X El Capitan will appear in /Applications.
    5. Prepare Bootable USB Installer
    Now, we need to prepare the USB Drive so that it will properly bootup on your PC.
    I recommend using Chris1111'S app for creating your USB Installer. It is a great timesaver!
    Download App Here[/url Follow the instructions in the first Post for creating USB Installer. Select Installer OS X El Capitan and Install in ESP (see image below) Select Install. This step may take some time, good time to get a drink. After App is finished, you will see a EFI Partition of USB installer on your desktop. Open EFI Partition, then open EFI folder, copy and paste the Clover folder from the zip file, to the EFI folder, choose replace folder. Download the latest version of Clover Bootloader and copy it to the root of your USB installer. USB Installer is Done! 6. Bios Settings Dell Latitude E6320
    Before we boot from the Dell Latitude we need to optimize the bios for OS X El Capitan.
    Start your Dell Latitude and press F2 to get into the Bios. In the main screen click on "Load Defaults", the bios will be reset to default settings. Go to General - Boot Sequence and choose on the right for USB Device and click the up arrow so that the USB Device is on top, click on apply to make the setting. Go then to System Configuration - SATA Operation and choose on the right for AHCI click again on apply and choose exit, now the Bios is ready for installing OS X El Capitan. 7. Installing OS X El Capitan from your USB drive
    Time for the fun stuff! We’ll now boot from your USB drive and install OS X El Capitan onto the Hard Drive.
    Using a USB 4G flash drive will help things out quite a bit.
    Power on unit while tapping F12 Key to choose boot device, select USB device. When Clover boot screen is visible, choose boot "Mac OS X from El Capitan USB Installer". The system will then boot into OS X installer For a new installation of OS X, you must erase and format the destination drive according to the following steps before continuing. If you are upgrading from Lion, Mountain Lion, Mavericks or Yosemite and you want to keep your files and apps, skip steps a-j. A. Choose Disk Utility B. Highlight your target drive for El Capitan installation in the left column. C. Click Partition tab D. Click Current and choose 1Partition E. Click Options.... F. Choose GUID Partition Table. G. Under name: Type El Capitan (you can change it later if desired). H. Under Format: Choose Mac OS Extended (Journaled). I. Click Apply the Partition. J. Close Disk Utility. When the installer asks you where to install, choose El Capitan Hard Drive. Upon completion, system will restart a 1st time. Press F12 key to choose the boot device. When the Clover Boot screen is visible, Choose your El Capitan Hard Drive. You will eventually get to the setup screens for OS X El Capitan. Go through the setup process to setup OS X El Capitan. Choose at "How do i connect to the internet " ..."My Computer Does Not Connect to the Internet", we will fix this later, go further with the setup process. The setup process will take about 3 minutes. Done! 8. Adjust some settings in OS X 10.11
    Once in 10.11 go to finder – preferences – General and choose in "show these items on the desktop" for Hard Disk External Disk CD Go also to System Preferences – Security& Privacy click on the lock icon in the lower left corner and type your password. Choose by “Allow applications downloaded from": click on "Anywhere" Close system preferences. 9. Installing The Clover Bootloader on Your Hackintosh
    The following instructions may appear a bit oversimplified, but we are trying to keep it simple for first-time Clover Bootloaders users.
    Copy the Clover Installer from the root of your El Capitan USB Installer to your desktop. Open Clover Package installer. Hit Continue, Continue, Change Install Location... Choose your HD, now called El Capitan and press Continue (see images below) Hit Customize and install clover with the following Custom Install settings (see images below) After installation of the Clover Bootloader, the EFI Partition of your El Capitan Hard Drive should be mounted on your desktop. Copy the Clover folder from the zip file into your El Capitan EFI Partition > EFI Folder. Make sure to choose to Replace the Clover folder. In Tools Folder of the zip file, Open Clover Configurator. Click File, Open File and select config.plist in EFI/EFI/Clover. Click on SMBIOS in left side pane and create your new SMBIOS (iMac 8.1) with Random Serial Number. Close Clover Configurator and save changes. Finished! Now remove the USB Installer and reboot into OS X El Capitan.




    10. Install Wlan driver for the TL-WN725N
    The wireless lan on the Dell E6320 doesn’t work, therefore I use a Wireless N USB Nano Adaptor from TP-LINK.
    The software is straight forward and installs without problems, the only thing is that after login the wireless
    app starts up and you have must close it every time, therefore I have made a script to launch the program
    after login and close it after 5 seconds.
    For installing the driver go to the folder “E6320 – Wlan_TP-LINK”. Launch the Installer.pkg and install the software, after install you will get the message to restart. Choose restart to restart you laptop. After restart the software will start the Wireless App. Choose you desired network and add it to your profile. Now we can install the login script. Go to “System Preferences – Users & Groups”, go to tab Login Items. Choose the + sign and browse to the folder “Install_E6320 - Wlan_TP-LINK” and choose “Wireless App2”. Close System Preferences. 11. iMessage & FaceTime Fix
    You will need MLB and Rom numbers from a legit Mac device that is onthe mac server.
    Run iMessage debug on a iMac, Macbook, etc and make a copy and paste of the Terminal output.
    Open Clover Configurator. Mount EFI Partition. Import config.plist from EFI/EFI/Clover (File , import configuration, browse to config.plist and select). In Clover Configurator Click on RT Variables, Enter Rom and MLB Values from iMessage output from valid iMac device. Save changes to config.plist. Reboot, Sign into iMessage iMessage and FacTime should now both be working.
    12. What's working?
    Just about everything.
    13. Finished!
    You’ve successfully installed OS X El Capitan onto your Dell Latitude E6320.
    TROUBLESHOOTING
    14. BOOT 0 ERROR
    If you are using a 4k HDD you can get boot:0 error, to solve this issue do the following
    Reboot system back into El Capitan installer (USB)FLASH DRIVE). Run Disk Utility find the Disk Identifier (eg. disk0s2). Unmount the drive you installed Mavericks on Launch Terminal and execute the following command: dd if=/usr/standalone/i386/boot1h of=/dev/disk0s2 . Exit Terminal Boot Normally 15. 16 Message "attempted to boot into EFI while legacy is on".
    Sometimes the above message will appear after formatting HDD and installing OS X.
    Reboot system back into El Capitan installer (USB)FLASH DRIVE). Run Terminal. Launch Terminal and execute the following command: sudo diskutil corestorage revert / When prompt type your password. Exit Terminal Boot with your USB to El Capitan Launch Terminal again and execute the following command to format EFI partition: sudo newfs_msdos -V EFI -F 32 /dev/rdisk0s1 After that install Clover to your HDD see chapter 10 "Installing The Clover Bootloader on Your Hackintosh" Done ! run os x el capitan 10.11 E6320.pdf
  16. Like
    pepto got a reaction from MacPeet in [Guide] El Capitan 10.11.X - Dell Optiplex 780 (760) 755 (790) (990)   
    Hello Guys i have managed to install El Capitan to my 790 with almost the same files of the tutorial of Morpheousman and Polyzargon. I will attached the 790_Clover directory maybe you can expand the tutorial to 760, 780, 755 and 790. Everything is working well even sleep and wake up. 
    I have also managed to install El Capitan to my E6320 laptop. you can find the tutorial here
     
    Her are the files for the 790
    790_CLOVER.zip
  17. Like
    pepto got a reaction from MacPeet in [Guide] El Capitan 10.11.X - Dell Optiplex 780 (760) 755 (790) (990)   
    Hello Guys i have managed to install El Capitan to my 790 with almost the same files of the tutorial of Morpheousman and Polyzargon. I will attached the 790_Clover directory maybe you can expand the tutorial to 760, 780, 755 and 790. Everything is working well even sleep and wake up. 
    I have also managed to install El Capitan to my E6320 laptop. you can find the tutorial here
     
    Her are the files for the 790
    790_CLOVER.zip
  18. Like
    pepto got a reaction from MacPeet in [Guide] El Capitan 10.11.X - Dell Optiplex 780 (760) 755 (790) (990)   
    Hello Guys i have managed to install El Capitan to my 790 with almost the same files of the tutorial of Morpheousman and Polyzargon. I will attached the 790_Clover directory maybe you can expand the tutorial to 760, 780, 755 and 790. Everything is working well even sleep and wake up. 
    I have also managed to install El Capitan to my E6320 laptop. you can find the tutorial here
     
    Her are the files for the 790
    790_CLOVER.zip
  19. Like
    pepto got a reaction from morpheousman in [Guide] El Capitan 10.11.X - Dell Optiplex 780 (760) 755 (790) (990)   
    Hello Guys i have just installed El Capitan on a 780 on my work   and it works with some little problems sound doesn't work for me but i am trying to make it work when i have the time. But the installer and the tutorial works great.
    Maybe its better to put a release nr for the tutorial so people can see wich is the latest, i have always done this in my tutorials also maybe for the zip file.
    Keep up the great work   :thumbsup_anim:  
  20. Like
    pepto got a reaction from morpheousman in [Guide] El Capitan 10.11.X - Dell Optiplex 780 (760) 755 (790) (990)   
    Hello Guys i have just installed El Capitan on a 780 on my work   and it works with some little problems sound doesn't work for me but i am trying to make it work when i have the time. But the installer and the tutorial works great.
    Maybe its better to put a release nr for the tutorial so people can see wich is the latest, i have always done this in my tutorials also maybe for the zip file.
    Keep up the great work   :thumbsup_anim:  
  21. Like
    pepto got a reaction from whisperer in [Guide] El Capitan 10.11.X - Dell Optiplex 780 (760) 755 (790) (990)   
    @Polyzargone I have just mailed Morpheousman the tutorial and have give him and you al the credits for keeping my topics alive, once again thanks guys and good luck with this topic .
  22. Like
    pepto got a reaction from morpheousman in [Guide] El Capitan 10.11.X - Dell Optiplex 780 (760) 755 (790) (990)   
    Hello long time no seeing great afford that the optiplex is still aliv,e great work Morpheousman, i will give it a go on my 790 to see if its works. If you wanna have my tut in word to make your own guide contact me and i will send it you guys because i am very busy with my kids and real social life.
  23. Like
    pepto reacted to polyzargone in [Guide] El Capitan 10.11.X - Dell Optiplex 780 (760) 755 (790) (990)   
    @Pepto
     
    Welcome back ! Nice to see everything is OK and all the best to you and your family !
     
    @Morpheousman
     
    Thanks for the quick reply .
  24. Like
    pepto got a reaction from morpheousman in [Guide] El Capitan 10.11.X - Dell Optiplex 780 (760) 755 (790) (990)   
    Hello long time no seeing great afford that the optiplex is still aliv,e great work Morpheousman, i will give it a go on my 790 to see if its works. If you wanna have my tut in word to make your own guide contact me and i will send it you guys because i am very busy with my kids and real social life.
  25. Like
    pepto reacted to morpheousman in [Guide] El Capitan 10.11.X - Dell Optiplex 780 (760) 755 (790) (990)   
    Updates:
     
     
     
    Run OSX El Capitan on a Dell Optiplex (780) (760) (755) (790) (990)
     
    1. Credits/Sources 
    Everything OSx86-related is a collaborative effort amongst people who enjoy doing these things, as well as those of us who enjoy tweaking and experimenting with things. Below are a list of sources used to compile this guide:
    OSX86 Wiki InsanelyMac Slice, and all testers who help with development of the Clover Bootloader polyzargone, MacPeet, Chris1111 and all other forum members who have posted in this topic and helping out the community. All of pepto's Previous Optiplex 780 (760) Guides! Mountain Lion 10.8.X, Mavericks 10.9.X, Yosemite 10.10.X. 2. Requirements
    Here are the requirements:
    A Dell Optiplex 780 (760) – This is necessary to install OS X El Capitan for this tutorial A working Install of Mac OS X – This can be in the form of an existing hackintosh, a virtual machine within Windows or Linux, or even a regular Mac. If you don’t have any of these things, then find someone who can help you out for a while. I prefer using a hackintosh with OS X Mavericks or Yosemite. Using an already working copy of Mac OS X either in a VM or a native hackintosh install is HIGHLY recommended. A 16GB USB flash drive (or larger) – We’ll be copying the files to the drive appropriately, so make sure that you have a flash drive with enough storage space (16GB or larger). A copy of OS X El Capitan  – If you don’t have a App Store Account, then create one to download OS X El Capitan for free! 30-60 minutes of time – Depending on how tech-savvy you are, this may be quick, or it may take a while. An SSD or HDD to install 10.11 to – For me, I used a 1TB partition to install 10.11 to. A PCI Express Video Card – For use with QE and CI.  I use a Ati Radeon HD5450 1GB but 512MB or 2GB also works. This Optiplex 780 (760) El Capitan Clover-v3.zip file, and the latest Clover Bootloader contains everything that you need to get your flash drive and hackintosh properly prepared. 3. My Specs
    My installation was successfully done on an Dell Optiplex 780 Desktop computer with the following specs.
    NOTE: A PCI video card is recommended to use the full potential of OS X El Capitan because the on board video card doesn't support QE/CI.
    Intel Core 2 Duo E8400 @ 3.0GHz 8GB DDR3 1600Mhz DDR3 RAM Western Digital 1TB HDD ATI RADEON HD5450 1GB Intel WG82567LM Gigabit LAN Onboard ADI 1984A HDA Audio Onboard Acer H243H 24" Monitor 1680×1050 display Bluetooth - USB Broadcom BCM20702 (works OOB) Logitech C615 HD Webcam (works OOB) Bluetooth  Keyboard (Generic Branded) Bluetooth Mouse (Generic Branded) 4. Download OS X El Capitan
    Open Mac App Srore. Login with your Apple ID. Download OS X El Capitan. Done! The Application INSTALL OS X El Capitan will appear in /Applications
     
    5. Prepare Bootable USB Installer
     
        I recommend using Chris1111's app for creating your USB Installer. It is a great timesaver!    
         * You must have OS X Mavericks or above to use this app, if not, you can also create USB Installer with this method here.
        
         1. Download App Here , or here.
         2. Follow instructions in first Post for creating USB Installer
         3. Select Install in ESP
         4. Select Create Installer. This step may take some time, good time to get a cold drink.
        5. After App is finished, you will see EFI Partition of USB Installer on your Desktop.
        6. Open EFI Partition, then open EFI Folder, copy and paste the clover folder from Optiplex 780 (760) El Capitan Clover-v3.zip, to the EFI Folder, choose to replace folder.
         7. There are 2 different DSDT's in the Optiplex 780 (760) folder. Copy the appropriate DSDT for your installation to: EFI/EFI/Clover/ACPI/Patched.
         8. Download the latest version of Clover Bootloader and copy it to the root of your USB Installer.
        9. USB Installer Pen is Done!
     
     
     
    6. Install OS X El Capitan
    This part is the most time consuming. Using a USB 4G flash drive will help things out quite a bit.
     
    1.     Shut down computer.
    2.     Power on unit while tapping F2 Key. Enter BIOS, change SATA operation to AHCI.
    3.     Save and reboot.
    4.     Press the F12 key to choose boot device, select USB device.
    5.     When clover boot screen is visible, choose boot “Mac OS  X from El Capitan USB Installer”.
    6.     The system will then boot into OS X installer.
    7.     For a new installation of OS X, you must erase and format the destination drive according to the following steps before continuing.
            If you are upgrading from Lion, Mountain lion, Mavericks or Yosemite and you want to keep your files and apps, skip steps a – j.
    a.     Choose Disk Utility.
    b.     Highlight your target drive for El Capitan installation in the left column.
    c.      Click Partition tab.
    d.     Click Current and choose 1 Partition.
    e.     Click Options…
    f.      Choose GUID Partition Table.
    g.     Under name: Type El Capitan, (you can change it later if desired).
    h.     Under Format: Choose Mac OS Extended (Jornaled).
    i.      Click Apply then Partition.
    j.      Close Disk Utility.
    8.     When the installer asks you where to install, choose El Capitan Hard Drive.
    9.     Upon completion, system will restart a 1st time.
    10.  Press F12 Key to choose the boot device.
    11.  When the Clover Boot screen is visible, Choose your El Capitan Hard Drive.
    12.  You will eventually get to the setup screens for OS X El Capitan. Go through the setup process to setup OS X El Capitan.
    13.  Choose at, “How do I connect to the internet”… “MY Computer Does Not Connect to the Internet”, we will fix this later, go further with the setup process.
    14.  The setup process will take about 3 minutes.
    15. Done!
     
    7. Adjust some settings in OS X 10.11
    Once in 10.11 go to finder –preferences –General and choose in "show these items on the desktop" - Hard Disk - External Disk - CD Go also to System Preferences – Security & Privacy click on the lock icon in the lower-left corner and type your password. Under, "Allow apps downloaded from", click on "Anywhere" Close system preferences. 8. Installing The Clover Bootloader on Your Hackintosh
     
             The following instructions may appear a bit oversimplified, but we are trying to keep it simple for first-time Clover Bootloader users.
            Copy the Clover Installer from the root of your El Capitan USB Installer to your Desktop:
             
    Open Clover package installer. Hit Continue, Continue, Change Install Location.... Choose your HD, now called El Capitan. Hit Customize and install Clover with the following Custom Install settings: (see images below) After installation of the Clover Bootloader, the EFI Partition of your El Capitan Hard Drive should be mounted on your Desktop. Copy the Clover folder from the Optiplex 780 (760) El Capitan Clover-v3.zip into your El Capitam EFI Partition > EFI Folder. Make sure to choose to Replace the Clover folder. In Tools Folder of Clover 760-780.zip, Open Clover Configurator. Click File, Open File, and Select config.plist in EFI/EFI/Clover.  Click on SMBIOS in right-side pane, and create your new SMBIOS, (iMac 10,1) with Random Serial Number.   Copy paste this SN into Board Serial Number and add enough Letters/digits to make it a 17 character number. Open a command terminal, run the following command: "uuidgen", paste the result in SMUUID box in Clover. Close Clover Configurator, Save changes. There are 2 different DSDT's in the Optiplex 780 (760) folder. Copy the appropriate DSDT for your installation to: EFI/EFI/Clover/ACPI/Patched. Finished! Now, Remove the USB Installer and Reboot into OS X El Capitan            
      
             Select Destination Partition: El Capitan Hard Drive
     
           
     
            Install Clover in ESP, Install boot0af in MBR, CloverEFI 64-Bits SATA 
     
          
     
           Expand Themes, Select BootCamp
     
           
     
          Install RC Scripts In Target Volume, Install Clover Preference Pane
     
     
    9. Video
     
           There are two DSDT's included in Optiplex 780 (760 folder. One DSDT is already edited for HD5450 Sound Cards, The other DSDT is a Generic DSDT
           to be used with Video Cards other than the HD5450. The appropriate DSDT for your Video Card should be copied to EFI/EFI/Clover/ACPI/Patched.
           
           
    10. AppleHDA Sound and HDMI Sound
          
           Method 1:
           Use Kext Utility to install MacPeet's  AppleHDA Version 3 kext. This kext will need to be reinstalled after a system update.
     
           Method 2:
          Injection Method, this method does not require kext to be reinstalled following a system update.
          Use AppleHDA and realtekALC kexts from this folder. Install AppleHDA.kext in S/L/E,  Rebuild cache.
          Place realtekALC.kext in EFI/EFI/Clover/kexts/10.11.  Use Clover Configurator to make necessary edits, as in included image.      
            
     
    11. Ethernet: 
     
           Install Intel82566MM.kext that is inside Ethernet Folder. 
            AppleIntelE1000.kext can be used if you have problems with your Ethernet, it works better for some people.
           
    12. iMessage & FaceTime
     
        iMessage and FaceTime should be fully functional. If you get an error message signing in, check to be sure that you 
        correctly followed steps 8 - 12 in Section 8: Installing The Clover Bootloader on Your Hackintosh.
     
    13. Updating To 10.11.6
     
        1.  Download the 10.11.6 Combo Update. Download
        2.  Install Update
        3.  Computer Will Reboot After Update is Complete
        4.  For Injection-Method Sound, No Updates to Kexts Should Be Necessary
        5.  For AppleHDA Sound, (non-injection Method) use Kext Utility to Reinstall AppleHDA.kext. Reboot!
        
     
    Whats's working?
     
    Just about everything.
    AppleHDA Sound, and Sound Over HDMI works using MacPeet's  AppleHDA Version 3 kext,, or Clover Sound Injection Method   iMessage and FaceTime Works All USB Ports, (thanks to polyzargon for USB injector Kext). Sleep is also working with the included DSDT.  Wake from sleep from Bluetooth Device is working. Radeon HD5450 Video Card is working without any kext edits needed using included DSDT.  
    Helpfull Links/Tools: Latest Clover Bootloader, Clover Configurator , TextWrangler , PlistEdit Pro , IORegistryExplorer HWSensors .
     
     PDF Optiplex 780 (760) El Capitan.pdf  Generic 760/780: DSDT.aml.zip  (Not Patched for HD5450 Video)
     
    Working Optiplex 790 (990): 790_Clover.zip
     
     Complete Guide, Including PDF and All Linked Utilities >>> Optiplex 780 (760) El Capitan Clover-v4
    Optiplex 780 (760) El Capitan Clover-v3.zip
×