Jump to content

movingmage

Members
  • Content count

    17
  • Joined

  • Last visited

About movingmage

  • Rank
    InsanelyMac Protégé
  1. Asus EAH 5850 3 ports working

    So....I switched out my 10.6.7 Ati kexts for the ones from Lion....I have DVI and HDMI working now, with QE/CI etc...but I'm getting this: $ ioreg | grep ATY | | | +-o ATY,ATY,RadeonFramebuffer@0 <class AtiFbStub, id 0x100000361, r$ | | | | +-o ATY_ATY,RadeonFramebuffer <class ATIFramebuffer, id 0x1000003$ | | | +-o ATY,ATY,RadeonFramebuffer@1 <class AtiFbStub, id 0x100000362, r$ | | | | +-o ATY_ATY,RadeonFramebuffer <class ATIFramebuffer, id 0x1000003$ | | | +-o ATY,ATY,RadeonFramebuffer@2 <class AtiFbStub, id 0x100000363, r$ | | | | +-o ATY_ATY,RadeonFramebuffer <class ATIFramebuffer, id 0x1000003$ Which is preventing DVD Player and such from working....It isn't a big problem, but I'd love if the framebuffer was recognized properly as Uakari....Any ideas?
  2. Asus EAH 5850 3 ports working

    Hi- I have the same card EAH 5850 by Asus. I have followed your instructions to the best of my ability but have not been successful. I am running 10.6.7. I have tried Chameleon+Kabyl, and the Chimera bootloader. I use GraphicsEnabler=Yes. I then put your AtiFramebuffer file inside the kext, fixed permissions etc... When I reboot, I just get black screens at the point when the GUI should load. I have two DVI monitors, one plugged into the DVI port, and one with an HDMI->DVI cable plugged into the HDMI port. Without your AtiFramebuffer file, both monitors are recognized, but they are mirrored at all times. I'd do anything to have my dual monitors work (like I was able to with my HD4850). Any suggestions or further guides / advice you can offer will be greatly appreciated. Best Regards, Joe
  3. Flash 10.1 - The real deal?

    What do you guys think? Anyone have luck with the new release? I can't find the old Gala one anywhere. quote name='movingmage' date='Aug 31 2010, 03:54 AM' post='1540390'] It is my understanding that the aug 11 release of 10.1 contains the full accel. code for the 9400m on osx (not the July 10.1 release)...but it still seems not to work. Ideas?
  4. Flash 10.1 - The real deal?

    It is my understanding that the aug 11 release of 10.1 contains the full accel. code for the 9400m on osx (not the July 10.1 release)...but it still seems not to work. Ideas?
  5. Flash 10.1 - The real deal?

    My mini 311 is 100% -- I even have 3G. I can not get hardware accelerated flash 10.1 to work though. Flash work's fine, it just doesn't change sys load or performance when I turn accel. on and off. Nothing. I have seen anecdotal reports around the 'net of it working for ppl. Is it possible that flash/apple's framework doesn't like the ION, and doesn't see it as a proper 9400m? I am using the retail pack 0.9, including the DSDT, and running 10.6.4. Any thoughts, help or experiences would be appreciated!
  6. USB sleep then wake "Device Removal" problem

    Hi Kizwan, I have a similar issue and I am hoping you can help. I am on an HP 311, and every time I sleep the computer the WWAN card wakes it up: 8/26/10 2:50:17 PM kernel System Sleep 8/26/10 2:50:21 PM kernel Wake reason = USB0 8/26/10 2:50:21 PM kernel System Wake 8/26/10 2:50:21 PM kernel Previous Sleep Cause: 0 8/26/10 2:50:21 PM kernel VoodooHDADevice[0x30e04000]::resume 8/26/10 2:50:21 PM kernel Resetting controller... 8/26/10 2:50:21 PM kernel USB (EHCI):Port 4 on bus 0x24 connected or disconnected: portSC(0x103802) 8/26/10 2:50:21 PM kernel USB (EHCI):Port 2 on bus 0x26 connected or disconnected: portSC(0x301803) 8/26/10 2:50:21 PM kernel The USB device HP Webcam-50 (Port 2 of Hub at 0x26000000) may have caused a wake by being disconnected 8/26/10 2:50:21 PM kernel Recsel fails src=010001c0 oss=00000000 8/26/10 2:50:21 PM kernel Enabling output audio routing switching at node 11: 8/26/10 2:50:21 PM kernel The USB device HP Integrated Module (Port 4 of Hub at 0x4000000) may have caused a wake by being disconnected 8/26/10 2:50:21 PM kernel The USB device AirCard (Port 5 of Hub at 0x4000000) may have caused a wake by being disconnected My USB0 section looks like this: Device (USB0) { Name (_ADR, 0x00040000) Method (_S1D, 0, NotSerialized) { Return (One) } Method (_S3D, 0, NotSerialized) { Return (0x03) } Name (_PRW, Package (0x02) { 0x0D, 0x03 }) Method (_DSM, 4, NotSerialized) { Store (Package (0x03) { "AAPL,device-internal", 0x60, Buffer (One) { 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } Device (RHUB) { Name (_ADR, Zero) Device (PRT0) { Name (_ADR, One) Name (_UPC, Package (0x04) { 0xFF, Zero, Zero, Zero }) } Device (PRT2) { Name (_ADR, 0x02) Name (_UPC, Package (0x04) { 0xFF, Zero, Zero, Zero }) } Device (PRT4) { Name (_ADR, 0x03) Name (_UPC, Package (0x04) { Zero, 0xFF, Zero, Zero }) } Device (PRT6) { Name (_ADR, 0x04) Name (_UPC, Package (0x04) { Zero, 0xFF, Zero, Zero }) } Device (PRT8) { Name (_ADR, 0x05) Name (_UPC, Package (0x04) { Zero, 0xFF, Zero, Zero }) } Device (PT10) { Name (_ADR, 0x06) Name (_UPC, Package (0x04) { Zero, 0xFF, Zero, Zero }) } } } Strangely..just following USB0 is USB1, and it seems awfully similar??(there is also a USB2 and a counterpart of that as well) Device (USB1) { Name (_ADR, 0x00040001) OperationRegion (P020, PCI_Config, 0x49, One) Field (P020, AnyAcc, NoLock, Preserve) { U0WK, 1 } Method (_DSM, 4, NotSerialized) { Store (Package (0x05) { "AAPL,clock-id", 0x02, "AAPL,device-internal", 0x10, Buffer (One) { 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } Method (_PSW, 1, NotSerialized) { If (Arg0) { Store (Zero, U0WK) } Else { Store (Zero, U0WK) } } Method (_S1D, 0, NotSerialized) { Return (One) } Method (_S3D, 0, NotSerialized) { Return (One) } Name (_PRW, Package (0x02) { 0x05, Zero }) Device (RHUB) { Name (_ADR, Zero) Device (PRT0) { Name (_ADR, One) Name (_UPC, Package (0x04) { 0xFF, Zero, Zero, Zero }) } Device (PRT2) { Name (_ADR, 0x02) Name (_UPC, Package (0x04) { 0xFF, Zero, Zero, Zero }) } Device (PRT4) { Name (_ADR, 0x03) Name (_UPC, Package (0x04) { Zero, 0xFF, Zero, Zero }) } Device (PRT6) { Name (_ADR, 0x04) Name (_UPC, Package (0x04) { Zero, 0xFF, Zero, Zero }) } Device (PRT8) { Name (_ADR, 0x05) Name (_UPC, Package (0x04) { Zero, 0xFF, Zero, Zero }) } Device (PT10) { Name (_ADR, 0x06) Name (_UPC, Package (0x04) { Zero, 0xFF, Zero, Zero }) } } } Any help you can offer would be greatly appreciated!
  7. Hacked BIOS EEE PC 900HA

    Macsnerd- I am pretty sure I did the ioreg step while booted into my Ubuntu live cd. Then, I did the rest booted into osx. J
  8. Hacked BIOS EEE PC 900HA

    Hey all- A modded BIOS is a perfectly good way to go, don't get me wrong. I personally recommend the DSDT override method though. You get the same exact results, but can make changes whenever your hardware changes (new RAM, etc...). Also, you don't need to flash your BIOS. MI
  9. Hacked BIOS EEE PC 900HA

    Ok. I have my second 900HA working now!!! Very, very stable -Sound, speakers/headphones - Audiee (No mic Input), used to set Fn keys to adjust volume -Webcam works natively in iChat/Photobooth -QE/CI/1024x600 w/ fn key brightness control- Modded GMA950/framebuffer kexts, and then displayconfigx to set the res once (not the GMA950.pkg installer, that one seems to cause artifacting) -Sleep/Wake/Shutdown/Restart/Clamshell sleep - All work, need the clamshell kext, but nothing speecial for sleep -Replaced my wifi pcie card with a broadcom card. Works with no special drivers. -Vanilla kernel I used PCEFI V9 With DSDT override (which incorporates chameleon), and 0203 BIOS (this is NOT a modded bios). I used fassl's patcher. I read out the bios's DSDT tables through Ubuntu (this is the only way I have had success), pulled it out of the file with a hex editor and then manually fed it into the patcher. I think iDeneb 10.5.5 is the only installer that will boot this machine with an un-modded bios. I needed different, custom made dsdt.aml files for each of my 900HAs. yay! -MI
  10. Hacked BIOS EEE PC 900HA

    I have a peculiar issue now...! I have 2 eee 900HAs. I built up the first one with 10.5.5 (iDeneb v3, DSDT override PCEFI V9) and added ACPIBattery.kext It works great, and I have a working battery meter. It also shuts down, sleeps and wakes nicely. I was so psyched!!! I imaged the install with diskutil so that I could set it up on my second 900HA. I set up the second 900HA identically by restoring the image, and guess what? The machine boots fine, but the battery icon has an X through it, and as an added bonus, sleep and shutdown do not work properly(doesn't wake from sleep, and doesn't fully power off on shutdown). Also, I can't adjust screen brightness with the FN keys like I could on the other 900HA. They both have the same BIOS and EC Firmware version. Very strange! I am so very sad right now and completely perplexed. Any thoughts? Need I generate a new DSDT.aml even though the machines are identical models? I gave that a try, but did so booted under the old DSDT.aml, does this then prevent me from generating a correct one? Need I boot under Ubuntu or some such thing? Thanks
  11. DSDT Patcher

    Fassl, I have a peculiar issue... I have 2 eee 900HAs. I built up the first one with 10.5.5 (iDeneb v3, DSDT override PCEFI V9) and added ACPIBattery.kext It works great, and I have a working battery meter. It also shuts down and sleeps nicely. I was so psyched!!! I imaged the install so that I could set it up on my second 900HA. I set up the second machine identically from the image, and guess what? The machine boots fine, but the battery icon has an X through it, and as an added bonus, sleep and shutdown do not work properly(doesn't wake from sleep, and does't fully power off on shutdown). They both have the same BIOS and EC Firmware version. Very strange! I am so very sad right now. Fassl, any thoughts? Need I generate a new DSDT.aml even though the machines are identical models? I gave that a try, but did so booted under the old DSDT.aml, does this then prevent me from generating a correct one?
  12. Hacked BIOS EEE PC 900HA

    Hey- I have the DSDT Override working with PCI EFI V9 (a new chameleon variant with the override built in). I had to make a dsdt.aml file. iDeneb v3 10.5.5 will boot this machine from CD-ROM. -I put a Broadcom miniPCI card into my 900ha in place of the oem card (about an hour disassembly/reassembly job). It registers as a genuine Airport card. -I have sound working with Audiee -I have the battery meter wokring with a special added kext -I have successful shutdown. I didn't originally - it would shutdown the OS but not power off. Then, I took the risk of running Apple Software Update. I let it update everything including the security update. Since then, shutdown goes to full power-off. -I have sleep/wake -I have full QE/CI harware based graphics at the native 1024x600, with 1280x1024 external monitor support extended desktop. No screen artifacting if you use the correct 950 kext and framebuffer kext. -I was able to add an EFI ethernet string, and although built-in ethernet itself does not work, this did seem to fix my Netflix streaming DRM issue. -There is a third-party speedstep kext that I got working, but I disabled it...the small increase in batt time is not worth the performance hit on an Atom processor to me. I get ~4 hrs batt. -Webcam works natively. -The biggest thing I am missing is sound-in (which would be nice for the webcam). It seems there is no driver specific to this sound chip. I'd love to see someone take this on. All-in-all a success (after much work! ) Please post your successes/failures and we can learn from each other! Best, MI
  13. DSDT Patcher

    Has anyone had any luck installing leopard on an eee 900HA? I can't find a modded bios anywhere, and I think this DSDT fix may be a bit beyond my pay grade. If anyone would be willing to offer me a bit of help, I'd be very appreciative. Hey - I might even pay for it! P.S. I have built Hackintoshes before and done vanilla installs with chameleon, so I know a bit about how things work.
  14. Hello, I am looking for a modified BIOS for 900HA. I'll offer my first born in exchange. I am looking to overcome the same DSDT issue that plagues all of the EEE netbooks, so that I can boot OSX. Here is the latest OEM one I can find: http://support.asus.com/download/download_...en-us&os=17 The 0305 looks to be the latest one. Any help would be greatly appreciated! J
  15. Hello, I am looking for a modified BIOS for 900HA. I'll offer my first born in exchange. Here is the latest OEM one I can find: http://support.asus.com/download/download_...en-us&os=17 The 0305 looks to be the latest one. Any help would be greatly appreciated! J OOPS - I forgot to add: I am looking to overcome the same DSDT issue that plagues all of the EEE netbooks, so that I can boot OSX. best, J
×