Jump to content

TheAngryYeti

Just Joined
  • Content Count

    21
  • Joined

  • Last visited

About TheAngryYeti

  • Rank
    InsanelyMac Protégé
  1. TheAngryYeti

    Suggestions for a dedicated GC

    I’m back on High Sierra now. I thought the issues were with Mojave, so I wiped and went back to HS (10.13.4).
  2. TheAngryYeti

    Suggestions for a dedicated GC

    And the GT1030 doesn’t fit my case cause the heatsink is too big. Ugh. -Sin
  3. TheAngryYeti

    Suggestions for a dedicated GC

    I ordered a GT1030 earlier today, so we’ll see if that works and fixes my issues. thanks! -Sin
  4. TheAngryYeti

    Suggestions for a dedicated GC

    First, my setup: Asus ROG Strix H370-I motherboard i5 8400 cpu 32gb 2133 ram 1tb Samsung EVO 860 ssd intel 630 graphics (integrated) im having graphical issues with the 630, so I was hoping someone could point me in the direction of a good 1gb/2gb graphic card that is supported. My PSU is only 250watt so I can’t get a card that requires a lot of power. Also, I’m using a very small case, so the card can’t be too big either. Cost isn’t a problem. thanks in advance! -Sin
  5. TheAngryYeti

    Couple questions

    Ive got High Sierra (10.13.4) installed and im having 2 issues. 1.) i installed Ableton Live and for some reason the windows are completely blank. why would they not show anything? 2.) when in Google Chrome, im getting blinking bars constantly whether im typing or not. thanks in advance for any help/tips! Setup: Asus ROG Strix H370-I mobo i5 8400 cpu 32gb 2133 ram 1tb Samsung EVO 860 ssd intel 630 graphics (integrated) -Sin
  6. Ok, so someone (Gigamaxx) helped me get my unit up and running by doing the following:At the clover screen, going to Options, then Graphics and changing the Platform ID to 0x59120000 and making sure Inject Intel was checked. But i have to do this every single time to get it to work.Now my unit boots! YEEHAW!!But, still have some issues:1.) I put Clover Configurator on my desktop via a thumb drive so i can open up the config.plist and make sure settings are proper. However, i cant find the config.plist file! Where is it located? I thought it would have been in the EFI folder and THAT doesnt even exist! I will say there is a EFI Backup folder...2.) For some reason, i can only use 1 of my 3.1 usb ports! Whats up with that?? I have 2 3.1 ports, 3 3.0 ports and 2 2.0 ports. Am i missing something? Should i update my motherboards bios?If anyone can help me out, id greatly appreciate it!Im SOOOO close to having this running smoothly!!!-Sin
  7. TheAngryYeti

    HP GeForce GT630 supported?

    Excellent. I will look that card up! i also came across 3 more cards that I need to find out if they work also. -Sin
  8. TheAngryYeti

    HP GeForce GT630 supported?

    My roommate had a HP NVIDIA GeForce GT630 2Gb card laying around and I’m thinking about using it as it doesn’t require power from psu. does anyone know if this is supported in a hackintosh running Mojave? -Sin
  9. TheAngryYeti

    Loss of display after install. Help!!

    No card. Using onboard graphics. I think it’s actually coming from the i5 8400 cpu I’m using, technically. i tried a DP cable today instead of hdmi, but that didn’t help. Same result. Now I’m getting beep codes relating to my onboard graphics. Ugh... my roommate has a few video cards lying around not being used. I’m gonna see if those are supported in my build. -Sin
  10. So after a gazillion tries with High Sierra, i gave up and decided to try Mojave. I had nothing to lose, afterall. I started from scratch. I reformatted my thumb drive. Made it bootable from the Mojave [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. Booted with it. Selected my language. It installed a little bit. Rebooted. I Booted from the SSD. Installed a bit more. Rebooted. I Booted from the SSD again and it finished the installation. I went through the basic setup and got to the desktop. I ran [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and selected my options and "built" it. Thinking i was a-ok, i decided to reboot, just to make sure all was well. After about 1min, i lose display. I thought i had messed something up in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url], so i decided to go back to my mac mini, redo the thumb drive all over again. I go to boot from the thumb drive and when i get to the language selection screen, i lose all USB usage, so i cant even get in to wipe the SSD and start over. So, Mojave is still on the SSD, but i cant get to it because i lose display. Im attaching a screenshot of Verbose mode right before i lose display. I would greatly appreciate any help to get back into it or at least help getting it re-installed!! -Sin
  11. First, my build: Asus ROG Strix H370-I mobo i5 8400 cpu 32gb ddr 4 2133 1tb samsung evo 860 ssd Ive finally gotten to the point where the installation of HS loads to the language selection screen, but then i lose all usage of every USB port. Im at a loss of what to do from here. According to others, i have the proper files in the kexts/other folder as well as the drivers64UEFI folder. Does anyone have any suggestions as to what i can do? Im getting kinda desperate as ive been at it for a week now and this is as far as ive gotten. -Sin
  12. TheAngryYeti

    Quick Clover Configurator question

    thats what im using: the application. im trying to add all the "Change 15 port limit...." changes into the config.plist but i am new to this application. -Sin
  13. TheAngryYeti

    Quick Clover Configurator question

    im trying to add custom patches to KextToPatch in Clover Configurator but i dont know how to. for example, here is one im trying to add: <dict> <key>Comment</key> <string>Change 15 port limit to 24 in XHCI kext 10.13 PB1</string> <key>Find</key> <data> g32MEA== </data> <key>Name</key> <string>AppleUSBXHCIPCI</string> <key>Replace</key> <data> g32MGw== </data> </dict> How do i add that into KextToPatch? -Sin
  14. TheAngryYeti

    Loss of USB port usage

    Yup. USB legacy and hand off are both enabled. -Sin
  15. TheAngryYeti

    Loss of USB port usage

    I don’t have any ps/2 ports on this mobo. Nor is this a laptop. It’s a custom build pc. -Sin
×