Jump to content

Drovosek

Just Joined
  • Content Count

    37
  • Joined

  • Last visited

About Drovosek

  • Rank
    InsanelyMac Protégé

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hey. I have a Dell Vostro 3267 system unit. It has a Skylake processor Intel Core i5-6400 with integrated graphics Intel HD 530, 8 GB RAM, 256 GB SSD. The monitor is connected via HDMI. I faced a problem that if I enter Hackintosh in a sleep mode, and then I press something on the keyboard, the system unit wakes up (I hear as coolers begin to turn), but the monitor does not react in any way. I tried to disconnect and reconnect the HDMI cord, tried to inject EDID in config tried to change SMBIOS on MacMini8,1, but it did not change the situation. How to solve the problem? P.S. All in Mojave 10.14.6 CLOVER.7z
  2. I also tried to follow this review (https://osxlatitude.com/forums/topic/2925-bluetooth-firmware-uploader/page/65/?tab=comments#comment-88003)I removed the kexts IOUSBFamily and IOUSBBluetoothFamily from /S/L/E and put instead kexts that were attached to the comment. I rebooted the system but only saw kernel panic. PS I did it in macOS Mojave 10.14.6
  3. I'm probably gonna ask a stupid question, but... will these kexts work fine on macOS Mojave 10.14.6 or are they only for macOS Catalina?
  4. Thank you for answering my questions. I appreciate that. I think the conversation about .dfu files do not correspond to this thread, so I made a separate thread, in which I will publish my ideas and the results of experiments. PS I have an offtopic question to you as to the staff of the forum. Why I can't upload kexts or comment on anything in the "Downloads" section? Screenshots: https://www.insanelymac.com/forum/topic/339967-voodoops2controller-modified-by-syscl-kprinssu-and-the-darkvoid
  5. Drovosek

    I Need Kext Wifi Atheros QCA9565 - Hp DV7 7202

    In new macOS try using this kexts/scripts:
  6. Hello. I have system unit Dell Vostro 3267 (i5-6400, Skylake). Information in signature. In this system block module installed Atheros AR9565 802.11 b/g/n Wireless Network Adapter, which, as I understand it, combines Wi-Fi - Atheros AR9565 and Bluetooth Qualcomm QCA9565. I managed to get working Wifi with kext from chunnann. https://www.insanelymac.com/forum/topic/312045-atheros-wireless-driver-os-x-101112-for-unsupported-cards/?page=17&tab=comments#comment-2509900 https://www.insanelymac.com/forum/topic/328426-qualcomm-atheros-ar9565-wireless-for-os-x-108-1014/ Bluetooth works only if you first boot into Windows and then reboot into macOS from it. At the same time, you need to install drivers for bluetooth in Windows from the official Dell website, because the original drivers that Windows downloaded and installed itself - did not allow the bluetooth module to work even in Windows. In bluetooth settings, the power button was inactive and there was an eternal search for devices (if macOS was loaded immediately after the PC started). Enable button disable I cured just by adding the folder /kexts/Other kext BrcmBluetoothInjector by writing inside it in the Info.the plist file corresponds to the VendorID and ProductID of my bluetooth (which are displayed in the system report). BrcmBluetoothInjector_Mod.kext.zip I am disappointed that Windows is able to automatically download the firmware to the bluetooth module during the download, and Hackintosh macOS has not yet done such a kext. In the search for solutions to the problem I came across here are the options for the text: IOath3kfrmw (OS-X-Atheros-3k-Firmware) https://bitbucket.org/RehabMan/os-x-atheros-3k-firmware/downloads/ https://github.com/RehabMan/OS-X-Atheros-3k-Firmware OS-X-BrcmPatchRAM https://github.com/the-darkvoid/BrcmPatchRAM https://github.com/RehabMan/OS-X-BrcmPatchRAM https://bitbucket.org/RehabMan/os-x-brcmpatchram/downloads/ https://bitbucket.org/anonymous_writer/os-x-brcmpatchram-catalina/downloads/ https://github.com/headkaze/OS-X-BrcmPatchRAM BTFirmwareUploader (as I understand it, this is an improved IOath3kfrmwr) https://osxlatitude.com/forums/topic/2925-bluetooth-firmware-uploader/ And here's a way - to use a virtual machine to the OS from it to download the firmware to the bluetooth module https://osxlatitude.com/forums/topic/10127-updated-nov-2017-fix-btfirmwareuploader-in-macos-high-sierra/ Unfortunately, not one of these options did not help me to ensure that bluetooth worked when "cold" start the PC in macOS. 1. I started to read more about kexts. In texte BrcmPatchRAM says that it is possible to add support for their bluetooth module in this kext. I downloaded the drivers for my bluetooth from the official site and extracted from .exe installer driver files themselves (This is easily done using 7-zip in Windows or using Keka in macOS). There were more files .dfu than others. As I found out .dfu files are compiled firmware files that the driver loads into the bluetooth module. In the instructions to BrcmPatchRAM States only .hex firmware files for Broadcom. I started looking for information on the Internet and found out that .hex files are the original "text" of the firmware as well .dfu is compiled .hex files. I immediately started looking for converters/decompilers/disassemblers from .in dfu .hex, but found only what's out .hex does .dfu file: https://github.com/pjsg/hex2dfu https://github.com/plietar/dfuse-tool https://github.com/kuro68k/ihex2dfu https://github.com/vpelletier/python-dfu As well as console utilities "dfu-tool" and "dfu-util" in Linux. I found out that dfu-util can be installed in macOS using Homebrew or use this option (it differs in functionality) https://github.com/the-darkvoid/dfu-util-osx 2. I also learned that .dfu files are used in macOS /System/Library/Extensions/IOBluetoothFamily.kext/Contents/PlugIns/IOBluetoothUSBDFU.kext/Contents/Resources I think we should try to replace all of them on that file that Windows loads the bluetooth module (I think if you try to do so, you need to make several copies of this file and rename it to the original ones .dfu files to be deleted). 3. As is the idea is just mine .dfu file rename to file .zhx and add it to the kext OS-X-BrcmPatchRAM (in BrcmFirmwareRepo.kext). But there is a problem - first, I don't know which one .dfu files are downloaded to my bluetooth, maybe even a few, because there are 3 files > 40 KB IN size and a lot of files ~ 2 KB in size. 4. In "dfu-tool" and "dfu-util" I saw commands that extract firmware from the device. Maybe it will be possible to boot into Linux and if bluetooth starts working there, then try to extract the firmware from bluetooth with these utilities, and then add this firmware to kexts somehow. 5. In the file BTFirmwareUploader.kex/Contents/MacOS/BTFirmwareUploader inside already have a list of firmwares, but they are in .hex format. Maybe there's a way to replace them with the contents .dfu file? I will continue to describe the ideas and results of the experiments. If you have any ideas or you can help to solve this problem, do not hesitate to write. Screenshots: Links to download drivers:
  7. Hey. I found out that the-darkvoid ported the "dfu-util" utility for macOS, I tried to use it and tried to download the file .dfu, but when you try to download the firmware, I got a message that the file is invalid. Bluetooth has not started to work. I also learned that these .dfu files are in /System/Library/Extensions/IOBluetoothFamily.kext/Contents/PlugIns/IOBluetoothUSBDFU.kext/Contents/Resources
  8. https://www.speedtest.net/result/8522447498 For AR9565 there is such a script: P.S. the speed Limit is 11 Mb, I have not noticed, I have speedtest gave 24 Mbps for download and upload. https://www.speedtest.net/result/8522447498 P. P. S. Tried just AirPortAtheros40.kext (AR9565.10.13.v21) throw in /Other, rebuild cache and restart Hackintosh - WiFi is not working. Similarly, only threw a text in KextUtility.Tried already working IO80211Family.kext (inside of which / Plugins contains AirPortAtheros40.kext) throw in /Other (in /S/L/E lay not patched), rebuilt the cache, restarted the Hackintosh, but WiFi was also not recognized. In config.plist parameter InjectKexts=Yes. It's weird, I thought Clover kext from /Other would put "on top" of that kext that in /S/L/E.
  9. Thanks for the script! Based on your script made mini GUI application (in Russian): https://vk.com/wall-135785821_1712 Also, I noticed that it is better to run the KextUtility program after running the script, so that the cache is rebuilt for sure. P.S. the speed Limit is 11 Mb, I have not noticed, I have speedtest gave 24 Mbps for download and upload. https://www.speedtest.net/result/8522447498 P. P. S. Tried just AirPortAtheros40.kext (AR9565.10.13.v21)throw in /Other, rebuild cache and restart Hackintosh - WiFi is not working. Similarly, only threw a text in KextUtility. Tried already working IO80211Family.kext (inside of which / Plugins contains AirPortAtheros40.kext) throw in /Other (in /S/L/E lay not patched), rebuilt the cache, restarted the Hackintosh, but WiFi was also not recognized. In config.plist parameter InjectKexts=Yes. It's weird, I thought Clover kext from /Other would put "on top" of that kext that in /S/L/E.
  10. Sorry, but I do not see Submit button :\
  11. Hey. I found a repository with modified voodoops2controller kext. Finalized it sysctl and kprinssu and the-darkvoid based on the kext from RehabMan. https://github.com/syscl/OS-X-Voodoo-PS2-Controller This kext almost like VoodooPS2Trackpad from acidanthera. https://github.com/acidanthera/VoodooPS2 https://applelife.ru/threads/acidanthera-voodoops2trackpad-dlja-synaptics.2944059/ I attach the compiled version. https://vk.com/doc183234383_514349114 P.S. If you try it, then naturally remove other kexts for the touchpad and keyboard and, first install via KextUtility. If it works fine, then remove it from /S/L/E and throw in /kexts/Other VoodooPS2Controller modified syscl.zip P. P. S. I wanted to upload this archive to the forum in the "Downloads" section to where the cupcakes are located, but I didn't see a button to create a theme there. Also I have there is no opportunity to leave comments. Why? It would be nice if someone moved this kext there, too.
  12. Thank you, I know this program, but I want to use this script (FetchMacOS), because it is cross-platform. By the way, I have on 10.14.6 program Get mac OS does not start and crashes. https://pastebin.com/hwpgGvPs P.S. I also found a program "Apple Multi Updates Loader [WineSkin]" that has similar functionality. https://mac-ru.net/viewtopic.php?t=480
  13. Unfortunately this is not my PC, I just decided to share the found config successful installation. https://vk.com/photo-12954845_457251886 Hardware: OS X 10.15.0 Beta 2 CPU Intel XEON E5 2650 v3 MB MSI X99A RAIDER AMD Radeon RX VEGA 56 video card Kingston HyperX Fury DDR4 2133Mhz 20gb memory Crucial 4gb 2400Mhz Sound E-MU 0202, Alc892 and AMD DisplayPort Audio Intel Gigabit LAN network WI-FI Broadcom BCM94360CS2 BCM20702 BT (trackpad and keyboard work in the BIOS) BP Enermax Platimax 1000W AirDrop works. SSD NVMe Reina 480gb Samsung 850 Pro 120gb Dell U2713H monitor USB 15 ports are registered manually. 3.0 works. Services usual, SpeedStep instituted through kekst. Sleep is unstable. EFI: https://vk.com/doc207634019_512032268 New EFI: https://vk.com/doc207634019_516702825 EFI.zip new EFI.zip
  14. Yes, I understand that these are different systems, but the characteristics of the processor i5-6400 is more powerful than i5-6200U and, accordingly, it should give more FPS, but this does not happen. In a PC with i5-6400 processor, the interface runs smoothly. While testing the benchmark, I looked at the graph in the Intel Power Gadget program and there the processor frequency increased to 3.1 GHZ, and the iGPU frequency to about 1 GHZ. Testing of the PC was carried out in a cool room and judging by the indicators of Intel Power Gadget it was heated no more than 55 degrees.
  15. Could you tell me why the Heaven Benchmark i5-6400 FPS is lower than the i5-6200U? The i5-6400 graphics are better and the frequency is higher (looked at in Intel Power Gadget, rise to 3.1 GHZ and the core more, but FPS 13-15, and less powerful i5-6200U with the same theme settings FPS 20-23) Turboboost worked. The sleep and wake of managed to fix these patches.
×