Jump to content

jsl2000

Just Joined
  • Content Count

    175
  • Joined

  • Last visited

Everything posted by jsl2000

  1. jsl2000

    [pre-release] macOS Mojave

    Thanks for this patch which also working for Mojave beta7 in my ASUS P5Q PRO hackintosh with CPU Core2 Extreme X9650 which is similar to E8400 without SSE 4.2 support.
  2. Thanks for this new Ryzen kernel which can boot with "kcsuffix=test -s then exit" to dektop at 10.13.3 and its performance was also very good. It can identify cpufamily not 0 now. One severe bug was unable to shutdown which got restart always in my Ryzen 1700X hackintosh, while Bronya's old kernel booted or shutdown faster than this one. But the major issue was still related to unable to rebuild prelinkedkernel (run sudo kextcache -u / successfully) at 10.13.4 or 10.13.5 even roll-back so many kexts from 10.13.3 in my Ryzen 1700X hackintosh. test.txt
  3. Thanks for this new Ryzen kernel which can boot with "-s, then Exit" to dektop in my Ryzen 1700X hackintosh at 10.13.3 (17D47). Its performance by Cinebench R15 or Geekbench was very good indeed. Without these boot arguments it always got invalid kernel opcode (64-bit): .......... errors repeatedly and unable to login desktop ! 1700x.txt
  4. jsl2000

    [pre-release] macOS Mojave

    No new installation if you have installed it successfully. Boot to your previous Mojave partition, then run its Post Install to patch it. That's all you need.
  5. jsl2000

    [pre-release] macOS Mojave

    You may get these from : http://dosdude1.com/mojave/
  6. jsl2000

    [pre-release] macOS Mojave

    At last got my 9600M GT working with Open GL & 64-bit DVD Player functions in Mac Book Pro 5,2. You may install Mojave Patcher's macOS Post Install via this link: http://dosdude1.com/mojave/
  7. jsl2000

    [pre-release] macOS Mojave

    For 9600M GT in real Mac Book Pro 5,2 I don't need Clover bootloader in Mojave. Yes, you are right. Only Apple software render is working without QE/CI in 10.14 beta3. Edit: I have got Open GL function after patched by macOS Mojave Patcher : http://dosdude1.com/mojave/
  8. jsl2000

    [pre-release] macOS Mojave

    Eventually got GT-9600M working at Mojave beta3 in real Mac Book Pro 5,2 Need rollback related Graphics & IOUSB kexts from 10.13.6 The same also working in Asus P5Q PRO (CPU: E8400, GPU: Nvidia GT-730) hackintosh too !
  9. jsl2000

    [pre-release] macOS Mojave

    Any chance to get Nvidia GTM-9600 working with CI/QE in Mojave betax ? My real Mac Book Pro 5,2 can login desktop, but both Finder and USB ports are failed ! Need fixed by USB & Nvidia Graphics related patches.
  10. jsl2000

    [pre-release] macOS Mojave

    Yes, I can confirm that this MBR patch worked for both HFS+ and apfs partitions in my hackintoshs. I'll try your advice ASAP. Clover version was updated to 4586 already.
  11. jsl2000

    [pre-release] macOS Mojave

    Thank you very much for your patch which can fresh install Mojave Public Beta 1 (18A314k) in MBR partition in my Z87 hackintosh without previous issue. Now I am concerning these questions : 1. Is this patch also working for GUID partition which has been confirmed by other users ? 2. If this MBR partition cloned to GUID partition, can it be updated via normal way by App store ? 3. Can you fix with similar patch to Mojave HFS+ or apfs Firmware check during updating to avoid such an issue ? Thanks a million because it's the first time I can install Mojave in my hackintosh without previous issue. Please see the attached install.log for your reference if it's what you want to check. BTW I'll send you the error log as soon as possible once I reproduce it again ! Because the previous install data were deleted during repeated installation failure ! install.log.zip
  12. jsl2000

    [pre-release] macOS Mojave

    Thanks, it can be updated now. But I need help from you or other friends here: At 10.13.6 or lower I never got this update issue. Only starting from Mojave beta1 (18A293u) to beta3 (18A326g) always got the same error at fresh installation or update: The installer resources were not found. .............Restart ! No matter what I have done with the following methods: Using Clover 4516 or newer Booted by EFI SMBIOS: had tried MacBook Pro 14,3 / Mac Pro 6,1 / iMac 18,3 / iMac Pro 1,1 Partition formated by GPID apfs Currently I can use USB HDD from Real MacBook Pro and cloned by CCC to get the working partition in these Hackintoshs only.
  13. jsl2000

    [pre-release] macOS Mojave

    Thanks for your reply. So you fixed it by change SMBIOS to Mac Pro 6,1 in CLOVER's config.plist or booted by other way ? At least in my P6TSE hackintosh it was fixed by SMBIOS (changed from IMac 14,2 to Mac Pro 6,1 in config.plist) now. But I want to know why it's working this way and is there other SMBIOS also working in hackintoshs ? However, it worked once only and failed again ! Need figure out the reason why it can not work now.
  14. jsl2000

    [pre-release] macOS Mojave

    I have the same issue as yours in all my hackintoshs (Z77, Z87, Z97, Z370, & X58). The only way to install or update Mojave DP1, DP2, or PB1 is attached USB HDD to Mac BooK Pro which can install or update without such an error. Had you fixed your problem ? Hope you can share your solution . By the way either apfs or HFS+ in my hackintoshs all got the same error need restart !
  15. Thanks, but it does not work in my UX31A hackintosh at Mojave. At 10.11.6 or 10.12.6 it got headphone port working only without internal speaker. By the way HDMI audio from HD 4000 works if connected with Sony TV.
  16. Thanks and is it in your Acer P253-M laptop ? Can you share your AppleALC.kext, DSDT.aml & config.plist to me because the same AppleALC 1.2.8 & -lilubetaall did not work in my Asus laptop UX31A.
  17. Thanks, it really works. My mistake, 17G39b is already beta 2 of 10.13.6 in my hackintosh. That's why I can not find another update for it.
  18. Thanks and it can update my hackintosh from 10.13.5 (17F77) to 10.13.6 beta (17G39b). But 10.13.6 beta2 is not available yet ! My mistake 17G39b is beta 2 already !
  19. com.apple.seeding.plist is already in /L/P and its value = 2, but not working yet for update to 10.13.6 beta. Change its value to 3 got the same. Does it mean that only clean install of 10.13.5 final version working ?
  20. Thanks, but I don't know why it does not work in my hackintosh. No such an update of 10.13.6 beta 1 in my App Store.
  21. Thanks but applied Shiki.kext with shikigva=60 or without this argument always got reboot before login desktop at 10.13.5 beta3. After repeated testing with different versions of WhateverGreen.kext I found that WEG version 1.1.5, 1.1.6 or 1.1.7 got blank screen from AMD RX 560 if Intel HD 4600 enabled at BIOS. Only version 1.1.3 or 1.1.2 got normal display from both AMD RX 560 and Intel HD 4600 at 10.13.4 & 10.13.5 beta1(10.13.5 beta 2 & 3 will broke it again !). Re-tested by disabled WhateverGreen.kext got the same results of display as the above but loss of HDMI audio from RX 560, which means it may not need WEG unless you need HDMI audio from RX 560.
  22. jsl2000

    Lilu — kext and process patcher

    My Intel HD 4600 and AMD RX 560 worked at 10.13.4 and 10.13.5 beta1 (15F35e), but got blank screen from RX 560 after updated to 10.13.5 beta2 and beta3. Another issue was related to versions of Lilu/AppleALC/WhateverGreen.kext: only Lilu & AppleALC (1.2.1) with WhateverGreen (1.1.2) worked at 10.13.4 & 10.13.5 beta1, newer versions still got blank screen from RX 560. After repeated testing with different versions of WhateverGreen.kext I found that WEG version 1.1.5, 1.1.6 or 1.1.7 got blank screen from AMD RX 560 if Intel HD 4600 enabled at BIOS. Lilu (1.2.3) & AppleALC (1.2.6) are compatible with WEG (1.1.2 or 1.1.3) in my hackintosh. Only version 1.1.3 or 1.1.2 got normal display from both AMD RX 560 and Intel HD 4600 at 10.13.4 & 10.13.5 beta1(10.13.5 beta 2 & 3 will broke it again !).
  23. Thanks for your post of testing at 10.13.5 beta3. Can you get display from both Intel HD Graphics and AMD RX 580 at the same time ? My Intel HD 4600 and AMD RX 560 worked at 10.13.4 and 10.13.5 beta1 (15F35e), but got blank screen from RX 560 after updated to 10.13.5 beta2 and beta3. Another issue was related to versions of Lilu/AppleALC/WhateverGreen.kext: only Lilu & AppleALC (1.2.1) with WhateverGreen (1.1.2) worked at 10.13.4 & 10.13.5 beta1, newer versions still got blank screen from RX 560.
  24. Thanks for your kind & prompt help. I think you did not use Lilu/AppleALC/WhateverGreen.kext in /CLOVER/kexts/Other. But using your config.plist does not work in my hackintosh with Clover 4421/4428/4439 yet. It still showed only mouse icon over black screen from AMD Radeon 5770/5850/6870 GPUs at 10.13 beta to 10.13.5 beta. No such an issue at 10.12.6 or lower. Not sure whether it's due to hardware compatibility or something else.
  25. Thanks again. Can you share with me your Clover EFI's version and its config.plist on 10.13.4 which enable both Intel HD 3000 and Sapphire Radeon HD 5570 or 6570 ? Any specific setting at BIOS too ?
×