Jump to content

Gwan

Donators
  • Content Count

    2
  • Joined

  • Last visited


Reputation Activity

  1. Like
    Gwan reacted to fusion71au in Run Vanilla OS X El Capitan, Sierra, High Sierra or Mojave in VirtualBox 5.x.x on a Windows Host   
    Update for High Sierra 10.13 17A365
    The El Capitan Settings from post#1 still work for macOS High Sierra 10.13 17A365, but with newer VirtualBox 5.1.xx releases, USB3/xHCI should be enabled.  Tested below with 3GB Base Memory allocated for the guest macOS.      To prepare the High Sierra ISO on your Mac or Hack: 1.  On your Mac or Hack with SIP disabled, download/copy "Install macOS High Sierra.app" into your Applications folder. 2.  Download and unzip the BaseSystem_CHSI.tool.zip (attached to this post) into your ~/Downloads folder.  Note: you will need approx 16GB of free space on your hard disk for the script to complete. 3.  Open OS X terminal, then run the following commands to execute the script: cd ~/Downloads/BaseSystem chmod +x CHSI.tool ./CHSI.tool   Provide your admin password when prompted...   4.  At the end of the process, you will have a HSierra.iso on your desktop - copy this onto an exFAT formatted USB for use on the PC Host later.   Installation Notes Install occurrs in 3 phases, procedure as follows:   1.  Boot to HSierra.iso and erase/format the Virtual HDD as HFS+ with Disk Utility.  Hint at the DU screen, click View & Show All Devices...     2.  Back at the main screen, select "Reinstall macOS" --->  will create first phase "/macOS Install Data" on target volume eg "HiSierra".  
      3.  We need to now copy the prelinkedkernel from our HSierra.iso to replace the vanilla one in "/macOS Install Data/Locked Files/Boot Files/" (using terminal, booted again into HSierra.iso):  <--- No longer need to copy prelinkedkernel from HSierra.iso for VirtualBox 5.1.30. cp -rp /System/Library/PrelinkedKernels/prelinkedkernel /Volumes/HiSierra/macOS\ Install\ Data/Locked\ Files/Boot\ Files/  
     
     
    Shutdown the system and remove the HSierra.iso from the Virtual CD drive.     4.  In the second phase, "/macOS Install Data" packages are extracted and installed on the disk.  On restarting the system, you will be greeted with the UEFI shell.  Type the 2 lines below, followed by <Enter> after each line...  FS1: "\macOS Install Data\Locked Files\Boot Files\boot.efi"  
     
     
    ---> will restart the installation process...
     
     
     
     
    5.  Final third installation phase is rebuilding kextcaches, booting to the completed installation to select language and setup new user etc.  
     
    BaseSystem_CHSI.tool.zip
  2. Like
    Gwan got a reaction from fusion71au in Run Vanilla OS X El Capitan, Sierra, High Sierra or Mojave in VirtualBox 5.x.x on a Windows Host   
    Thanks for this great guide, actually what I was looking for for weeks. It works also under Virtualbox for Linux, and everything went fine until I tried to install Clover in legacy mode.
    It boots fine in UEFI mode, but in legacy I get a kernel panic with "zone_init: kmem_suballoc failed". And the virtual machine goes to "Guru Meditation".
     
    Any clues?
  3. Like
    Gwan reacted to fusion71au in Run Vanilla OS X El Capitan, Sierra, High Sierra or Mojave in VirtualBox 5.x.x on a Windows Host   
    Run Vanilla OS X El Capitan, Sierra, High Sierra or Mojave in VirtualBox 5.x.x on a Windows Host
    Following on from my previous guide on how to create a VMware virtual machine running Vanilla OS X El Capitan in Windows, I’ve decided to write a similar guide for creating a VirtualBox El Capitan VM. 
     
    The virtual machine should be useful for testing El Capitan and also for creating installers for use on a real machine/hackintosh.
     
    There are other tutorials and videos on the net about running OS X on Windows machines using pre-made VMDK disk images but you can never guarantee what else is in there….
     
    I’ve gathered info for this guide from several threads in the Multibooting and Virtualisation section of this forum and also the wider internet eg
     
    @colt2 HOW TO: Create a bootable El Capitan ISO for VMware
    @dsmccombs comment on faking Ivybridge Processor
    @E:V:A http://forum.xda-developers.com/showpost.php?p=55572430&postcount=6
    @Tech Reviews video tutorial https://www.youtube.com/watch?v=t7X07U63lwg.
    VirtualBox Forum: Status of OSX on OSX
     
    Requirements
       Intel PC with four or more CPU cores running Windows 7 X64 or later OS (2 or more cores needed for OS X)    4GB or more RAM (2GB or more will be needed for OS X)    Hard Disk with at least 40GB free for Virtual Machine    Oracle VM VirtualBox v 5.0.34    Install OS X El Capitan app and Mac or Hack to prepare installation iso <-- Now, no longer necessary to have previous access to a Mac or Hack by building the Installer.app from scratch - see post#75    16GB or larger exFAT formatted USB stick to transfer El Capitan iso from Mac/Hack to Host PC  
    Prepare Installation ISO on your Mac or Hack
    1.  On your Mac or Hack, download "Install OS X El Capitan.app" from the App Store into your Applications folder.
    2.  Download and unzip the CECI.tool (attached to this post) into your ~/Downloads folder. The commands in this executable script are shown below for informational purposes.  Note: you will need approx 16GB of free space on your hard disk for the script to complete.
     
     
     
    3.  Open OS X terminal, then run the following commands to execute the script:
    cd downloads chmod +x CECI.tool ./CECI.tool 4.  At the end of the process, you will have an El Capitan iso on your desktop - copy this onto an exFAT formatted USB for use on the PC Host later.
     
     
    Create an El Capitan Virtual Machine in VirtualBox
    1.  Open the VirtualBox program and click the "New" button to create a new VM.
     

     
    2.  Select Mac OS X and Mac OS X 10.11 El Capitan (64 -bit) for Operating System type and version.  I named my Virtual Machine "El_Capitan", then clicked next...
     

     
    3.  Leave the Memory size at the recommended 2048 MB, then click next.
     

     
    4.  Choose to "Create a virtual hard disk now", then click the create button.
     

     
    5.  For the hard disk file type, the default is VDI (VirtualBox Disk Image) but I have selected VMDK for inter-operability with VMWare.  Click next...
     

     
    6.  For Storage on physical hard disk, I have chosen the default Dynamically allocated (grows larger to a set limit as you need more disk space).
     

     
    7.  On the File location and size screen, you can set the location of the new virtual hard disk and its size - I recommend changing disk size to 40GB or larger.  When you click the create button, you will now see your new VM in the VirtualBox main GUI.
     

     
    8.  Click the settings button on the Main Menu to tweak a few settings....
       a.  On the System/Motherboard tab in Boot Order, you can uncheck the Floppy Drive (who has these now?)
     

     
       b.  On the System/Processor tab, you can increase the allocated CPU cores to 2
     

     
       c.  On the Display tab, you can increase the allocated Video Memory to 128MB
     

     
       d.  On the Storage tab, click on the icon of the Optical Drive and select "Choose Virtual Optical Disk File". 
     

     
    Navigate and select the El Capitan ISO we created earlier...
     

     
       e.  Click the OK button to finalise the VM settings.
     
     
    Patch El Capitan vbox configuration file with DMI Settings from a Mac
    1.  From the start menu, type cmd and click run as administrator to open an administrative command prompt. 
     

     
    2.  Choose a Mac Model similar to your host system, then type the following lines, followed by <enter>  after each line.  Make sure you first close all VirtualBox Windows and the VirtualBox program, otherwise any changes you make won't stick...
     
    Eg iMac11,3
    cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "iMac11,3" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-F2238BAE" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 MacBookPro11,3
    cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "MacBookPro11,3" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-2BD1B31983FE1663" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 Macmini6,2
    cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "Macmini6,2" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-F65AE981FFA204ED" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 3.  Optional- For some host systems eg those with Haswell and newer CPUs, you might have to spoof an older CPU to avoid VirtualBox errors.  You can try from one of the following if this happens:

    To spoof Lynnfield i5 750 CPU
    VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000106e5 06100800 0098e3fd bfebfbff To spoof IvyBridge CPU
    VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000306a9 04100800 7fbae3ff bfebfbff or
    VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000306a9 00020800 80000201 178bfbff 4.  Close the command prompt window.
     
     
    Installation of El Capitan
    We are now ready to start the El_Capitan Virtual Machine....
     



     
    Installation should be relatively straight forward, just following the prompts of the OS X installer:
    1.  Select language, agree to legal terms
     

     
    2.  Use Disk Utility from the Utilities Menu to erase and format the virtual hard drive as a single partition GUID Mac OS X Extended.  I named my drive "Macintosh HD" but you can enter whatever you like eg El_Capitan.
     

     
    3.  Quit DU and choose Macintosh HD to install El Capitan on.
    4.  After 20-30 min (depending on how fast your system is), the installation will complete.  At this point, unmount the El Capitan ISO by clicking the Devices menu from the VM window, click Optical Drives, then choose Remove disk from virtual drive.  The VM is now ready to reboot into OS X from the virtual hard drive.
    5.  At the welcome screen, choose your country and keyboard layout.  You can skip transfer information, location services and logging in with your Apple ID if you wish…
    6.  Create a User Account and select your Time Zone.  You can skip sending diagnostics and usage data to Apple….
    7.  Finally, you will arrive at the El Capitan Desktop.
     

     
    8.  Network/internet and audio should work OOB but on my system, the sounds were distorted.  Unfortunately, there is no QE/CI and the VM resolution will be fixed without the ability to dynamically resize the VM window (no VirtualBox additions for OS X guests atm). 
     
     
    Customization with VBoxManage
    1.  You can change the default resolution of 1024*768 (after shutting down the VM) with the VBoxManage command from the Windows Administrative Command Prompt:
    cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" VBoxInternal2/EfiGopMode N (Where N can be one of 0,1,2,3,4,5) referring to the 640x480, 800x600, 1024x768, 1280x1024, 1440x900, 1920x1200 screen resolution respectively.
     
    Update:  For VirtualBox 5.2.x, the command for changing screen resolution has changed...
     
    VBoxManage setextradata "<MyVM>" VBoxInternal2/EfiGraphicsResolution XxY (where X=Horizontal screen resolution, Y=Vertical screen resolution)
    eg
    VBoxManage setextradata "<MyVM>" VBoxInternal2/EfiGraphicsResolution 1280x1024 2.  Adding serials and other SMBIOS details for the System Information Screen
    VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemSerial" "W8#######B6" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardSerial" "W8#########1A" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVendor" "Apple Inc." VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemFamily" "iMac" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBIOSVersion" "IM112.0057.03B" A listing of known issues with Mac OS X guests can be found in the VirtualBox Manual - link https://www.virtualbox.org/manual/ch14.html.
     
    Vanilla Mavericks and Yosemite, Snow Leopard from Retail DVD
    The same VM settings for El Capitan will also boot and run vanilla installations of OS X Mavericks and Yosemite .  Attached to this post are installer scripts to create bootable Mavericks (CMI.tool) and Yosemite (CYI.tool) ISOs for VirtualBox and VMware.
     
    With the respective OS X installer apps in the Applications folder, download and run the installer tools using terminal ie
     
    To create a Mavericks ISO on your desktop
    cd downloads chmod +x CMI.tool ./CMI.tool To create a Yosemite ISO on your desktop
    cd downloads chmod +x CYI.tool ./CYI.tool Here is a screenshot of the VM running Mavericks 10.9.5...
     

     
    Finally, those without a Mac/Hack to prepare the install media can purchase a retail Snow Leopard DVD directly from Apple and install OSX 10.6.3 on their virtual machines (Snow Leopard, Lion and Mountain Lion run quite happily in VirtualBox with 1 CPU, 1-2 GB of RAM and the rest of the settings unchanged from above).  Once you update by combo update to SL 10.6.8, you can directly download El Capitan from the App Store for free .
     

     
    UPDATE macOS Sierra 10.12 to 10.12.6: For macOS Sierra, use CSI.tool in post#51.
    UPDATE macOS High Sierra 17A365:  For macOS High Sierra, use CHSI.tool in post#73.
    UPDATE macOS Mojave 18A391:  For macOS Mojave or High Sierra, use macOS_iso_creator.tool on page 4 of thread.
    UPDATE macOS Catalina Beta DP3_19A501i:  For Catalina, @jpz4085 has made an automated batch file to create a Catalina VM in Windows with iMac 14,2 SMBIOS.  You can still use my macOS_iso_creator.tool on page 5 to make an installer ISO to attach to the VM.
     
     
     
    Good luck and enjoy
    CECI.tool.zip
    CYI.tool.zip
    CMI.tool.zip
×