Jump to content

Trigue

Members
  • Content Count

    34
  • Joined

  • Last visited

Everything posted by Trigue

  1. Hi all,I have this error for second time. Simply on booting the system, my clover stop on this. First some hard disk cause failure of data, reading writing. I thought this is a hardware problem, but it is not. This happened after some software update and not immidiatly after some weeks or months of using. I used plinked kernel method to install Mac OS on my motherboard found on insanely Mac. I use AHCi kext 328 to see my other drives too...I want to know if it is it possible to fix it? I don't want to reinstall the Mac OS again, Because I have a lot stuff, that I must install after that. I don't have time machine backup disk. I cant boot from usb stick, it is sticking on that screen. Installed my system on Test partition ( same drive ). Installed clover, no problems too boot, but if I select my main volume, is sticking on the screen. I really need an advice
  2. Trigue

    Korg error 0-00000

    Hello, I installed my Snow leopard retail via tonymac's metod and than updated via DSTS. My computer is working well evyrthing is fine but really can't find a solution for the korg plugins. I saw a lot off decisions here, tryed some to fix my problem, but still can't get the the damn system id of korg plugins......0-00000. Really need help.... 10x
  3. Trigue

    Korg error 0-00000

    If it i works, please expain us how !!!
  4. Trigue

    Korg error 0-00000

    i found another file com.apple.Boot.plist in MY HD/Extra it contains : <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Default Partition</key> <string>hd(0,2)</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string>PCIRootUID=1</string> <key>Legacy Logo</key> <string>Yes</string> <key>Timeout</key> <string>1</string> </dict> </plist> I maened DSDT. Yes, you are right about the clicks, I am just tried, but except this problem never had problems...
  5. Trigue

    Korg error 0-00000

    in com.apple.Boot.plist is this <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Kernel Flags</key> <string></string> <key>device-properties</key> <string>4f0000000100000001000000430000000100000002010c00d041030a0000000001010600041c0101060000007fff04001a0000006200750069006c0074002d0069006e003d00790000000500000001</string> </dict> </plist> my Motherboard is Intel Biostar TH55B HD Video Image : Video And about the graphic injection can't rember. I selected it when i created the DSTS something that support my for NVidia for, for 9800 GT graphic card. Sorry that i can't answer exactly. Tell me how to check , if necessary.....
  6. Trigue

    Korg error 0-00000

    Image : http://img153.imageshack.us/f/screenshot20110428at431.png The Chameleon was the solution to get my system works properly and boot too. I took the ethernet cable to modem off and Ethernet going off and red, but system profiles still en0. Now will restart my computer without ethernet... I will take a look at this post again, but i think i read and tried the tips there, however.... Thank you Gringo ! EDIT: Oks the ethernet cable was off ethernet red and in system en0 after restart, ethernet calbe switch on and nothing changes.... all is still en0. In chameleon options Ethernet build in was always selected....Never changed it.
  7. Trigue

    Korg error 0-00000

    http://img90.imageshack.us/f/screenshot20110428at123.png http://img534.imageshack.us/f/screenshot20110428at133.png These are the 2 images, My Imager don't work dunno how ...never happened.... This the Networkinterfaces.plist's Contains : <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Interfaces</key> <array> <dict> <key>Active</key> <true/> <key>BSD Name</key> <string>en0</string> <key>IOBuiltin</key> <false/> <key>IOInterfaceType</key> <integer>6</integer> <key>IOInterfaceUnit</key> <integer>0</integer> <key>IOMACAddress</key> <data> ADBnVJCC </data> <key>IOPathMatch</key> <string>IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/BR24@1C,4/IOPCI2PCIBridge/ethernet@0/com_chucko_RealtekR1000/IOEthernetInterface</string> <key>SCNetworkInterfaceInfo</key> <dict> <key>UserDefinedName</key> <string>Ethernet Adaptor (en0)</string> </dict> <key>SCNetworkInterfaceType</key> <string>Ethernet</string> </dict> <dict> <key>BSD Name</key> <string>en0</string> <key>IOBuiltin</key> <false/> <key>IOInterfaceType</key> <integer>6</integer> <key>IOInterfaceUnit</key> <integer>1</integer> <key>IOMACAddress</key> <data> AoA3BwMA </data> <key>IOPathMatch</key> <string>IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EUSB@1D/AppleUSBEHCI/Sony Ericsson W850@1d160000/Ethernet Data Interface, Bulk Mode@9/AppleUSBCDCECMData/IOEthernetInterface</string> <key>SCNetworkInterfaceInfo</key> <dict> <key>USB Product Name</key> <string>Sony Ericsson W850</string> <key>UserDefinedName</key> <string>Sony Ericsson W850</string> <key>idProduct</key> <integer>53304</integer> <key>idVendor</key> <integer>4046</integer> </dict> <key>SCNetworkInterfaceType</key> <string>Ethernet</string> </dict> </array> </dict> </plist> I really don't know what is wrong, I really read the posts here carefully on this great forum many many times, but still can't get that s**t works....Tried many times step by step again and again, followed the different tips, but still no good results. Unistalled and reinstalled the plugins after every operation .... but nope. Really don't know what is wrong.... EDIT : I haven't such of problems with Stylus RMX.
  8. Hello dudes, I just get my new Pc with this configuration. I tryed the tony's metod to install the retail DVD. I removed 4 GB memory from 8 and istalled the OS suceffull. But seems the system don't work corectly.First the System info don't indicate my configuration corectly. When I removed the memory, Installed the system and put the rest of my memory again. It indicates not like dd3 1333 Mhz, it shows it like DDR2 667 Mhz. It don't show the corect me the processor info. Oks I wanna get Horking Hackintosh for music producing with Logic. When I tryed to install the logic 9 studio to see how it works, The Install is running till 50% and stop and give me The installation Failed. So, it seems cannod load it. I tried to install the Mac OS with 8 GB too, bot Fail. Soo how I see there is a memory problem. Oks I don't updated to 10.6.4 and used [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url]. So, my question is can I get good config to build a normal working, where I can work? Please tell me is there hope for now to run my config normaly after finishing these Method, founded here? When I installed 10.6.3 with [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url], I don't needed any external drivers for lan, video, or sound. Please tell me or give me some tipps or link, how ti fix my problem. If you have DSDT for my conifg, you can share it, I will be thankfull 10x in advance
  9. Really, can't someone give me any tipps?
  10. Hello folks, I am uisng Mac Os 10.5.7 and Ati Radeon 2400 Pro. In near Future I will buy a new machine and will choose video for dual monitoring. But I am asking now If it is possible to use 2 monitors with this video interface ? Sorry for the stupid question, but really, I don't have an idea about it. It is all about to work with Logic if you have any expirience with this video card, you can share it with me. 10x.
  11. Trigue

    Logic 9 problem

    I supose it is from your authorization, may be I am wrong but I don't know. Or may be some of the plugins,external FX or VST can cause the same authorization problem...or you have low memory or etc. I have the same problem sometimes, but it happens when I am using really a lot of processor-memory hungry plugins.
  12. Hi all, I am running Mac OS on my Hackintosh and everything is working perfect. I want to buy pro sound card. My question is, did someone run Firewire on this MOBO, problems? I haven't a firewire but I want to buy and than to choose model of sound card. So, need little requests, tips 10X!!!
  13. HI all, I need battle net server editor or gateway editor specially for Star Craft, I think it is the same for all Blizzard products. It is a freeware but I can't find in google if you have one pls share or give me a link. Cheers
  14. Trigue

    Bnet net server/gateway editor need...

    There isn't gateway editor for MAC OS...
  15. Hi all, I am using the Logic Studio as a main sequencer. The external plugins or instruments, of course these, which can be used in Logic must be Audio Units. So, I am looking now for Mac instruments or pluggins which, are not Audio Units, but they have the Rewire option, and theoretically they can be used with Logic for example or another rewire host or etc... I am searching and checking non-stop, but your feedback for this kind of plugins, instruments with this option is very important for me, because it is never enought , and I would be thankfull... Regards, Trigue
  16. I updated Ideneb 10.5.6 to 10.5.7 sucesfully and everything works fine. But it seems there is a an error and don't indicate my processor and hardware corectly. I tested with Logic on 48 000 Hz/ normally I am working/ and I don't lose CPU power and it works normal with 4 cores. But how can I Fix this? All the of the rest is indicated, how it should. But this why not? Have someone any ideas? Regards,Trigue
  17. Hi all, I have the Oxygen8 v2 25 keys small keyboard and The Fast Track Pro USB for sound interface. I am using the Logic Studio 8.02 and a lot of other Plugins. I connected till now all via USB. But my question is how to connect this MK via Midi and play it via Midi, no using USB cable anymore? I have Adapters for my devices and 1 midi cable. OUT from my MK and in in the Fast Track Pro/ is connected via USB to my Computer and everything is energy powered with adapters for the devices/. But, I am not getting sound when I play via Midi Cable/Ports, have sound from my MK only via USB. Is there special software or may be special synchronization from Software, to make this Keyboard Usefull via Midi ports? Please let me know, how and give some tipps or infos, I would be thankfull. LG, Trigue
  18. Hi people, I want to install Kalyway_10.5.2_DVD_Intel_Amd.iso on my PC to try the Mac OS. It is starting with the booting from the DVD and give me these fails and stops: 1. ApplePS2Mouse : probe failed 2. Still waiting for root device Must I try another reliese? I tryed : Mac OS X 10.4.8 [JaS AMD-Intel-SSE2-SSE3 with PPF1 & PPF2], Leo4All-10.5.2 Universal AMD/INTEL[sSE2/SSE3] but not good results. I cannot install them. I checked this section of the forum, but didn't find exactly information about the problem with kalyway. Can you me help, if you know how to fix it? Thanks!
  19. Trigue

    ATI Radeon HD pkg installers 10.5.x & 10.6

    IMAGE 10x all done !
  20. Trigue

    ATI Radeon HD pkg installers 10.5.x & 10.6

    I have the same problem, I installed these kextes/ Just runned the package/. It showed me msg, need to reboot. After reboot I have black screen, when the OS starts Ideneb. 10.5.5. Really can't understand why.....I don't isntalled any programms or drivers or ... just nothing when I installed the Os but have the same divice 94c3.Can't get workin' resolution... @lastExile Is there a chance to run normal Ati Radeon Pro 2400 Pcie 94c3 like the old packege installer on Ideneb 10.5.5? CHeers !
  21. Trigue

    ATI Radeon HD pkg installers 10.5.x & 10.6

    Some news about ATI Radeon 2400 Pro id:94c3 + 10.5.5?
  22. Trigue

    ATI Radeon HD pkg installers 10.5.x & 10.6

    10.5.5, Ati Radeon 2400 Pro id: 94c3 don't work with this, I dont't believe that you installed these drivers and they are working.... . And my question, will be possible the support soon for id: 94c3/ Ati radeon Pro 2400/ with 10.5.5 and 10.5.up than 5 ?
  23. Trigue

    ATI Radeon HD pkg installers 10.5.x & 10.6

    HI all, I am using Ati Radeon 2400 Pro id: 94c3 and the old drivers worked fine with the Leo4all versions / to 10.5.2, with resolution/ Now I installed Ideneb 10.5.5 and this old drivers for my Ati are not working. When I install them, nothing is happening. Can someone help ..?
  24. This is my Pc Config: Processor: Intel Core 2 Quad CPU E6600 @ 2.4 (8MB/1066)tray Motherboard : Asus P5K SE , Intel p35 Chipset VGA : Ati Radeon 2400 Pro 256 mb Memmory: 2 GB DDR2-667 Kingston HDD: 320 GB SATAII Hitachi 16MB 2 partitions: C: WIN XP x64 bit, primary 100 GB D: for MAC , primary 200 GB I am using this sound card : http://uk.europe.creative.com/products/pro...p;product=15911 I can run Mac OS X on my PC. But my question is can I run Logic Pro 8 with rewired Reason 4 on this Hackintosh? What kind of sound card will I need? I read, for Hackintosh is better external Soundcard, true? Please give me some tipps where and how to check the perfect model for this operation, if I cannot run it. If you did it, please tell how... Thanks !
  25. HI all, I am running logic and Reason in Rewire very fine, import Midi, export Midi. But... When I want to set Automation of some options on the Instruments of Reason and how can to Export this Automation in Logic's Sequencer? For Example Want to set on the drum kick from Redrum on the Pitch -64 - 0 but the Automation is working only for reason how to export it in Logic?
×