Jump to content
InsanelyMac Forum

877

Members
  • Content count

    26
  • Joined

  • Last visited

  1. Very slow loading for me too, other pages are fine..
  2. Hi, its been a while but I’m sure the ad2000b option was there. I’ve since changed pc’s so can’t check sorry.
  3. All is fine with one monitor, but when I connect my 2nd monitor (TV) via HDMI it causes THIS. GPU is EVGA GTX970 First monitor is Benq G2222HDL via DVI TV is Panasonic 50CX680 via HDMI Also I have audio via coax s/pdif to my amp receiver (not tested yet). In Clover Configurator >SMBIOS it's set to MacPro5,1 Thanks for any advice
  4. Its working with your first DSDT.aml only if I change audio>7 in config.plist. I will try and restore AppleHDA to original and test if AppleALC can work without any mod. Thanks very much!!!!!
  5. Thanks MaLd0n, I updated Clover like you said and now NVIDIA is working on reboot (I also needed to copy over the DSDT.aml and kext files as they were gone after update for some reason). Audio Audio was not working, but it does work if I change config.plist to inject audio>7. Should the changes you made in DSDT.aml and the new AppleALC.kext in CLOVER>KEXTS>OTHER enable audio? Or should I be using my patched AppleHDA.kext (currently installed to S/L/E via Kext Utility) made by using this guide ? Many thanks!! CLOVER877backup 28-01-2018.zip MironeAudio_877_audio_7.zip
  6. It is updated to lasted version v4392, should I reinstall it fresh and copy your dsdt file over? Thanks for the help! ??
  7. It's legacy (BIOS). Update: FIXED - enabled web drivers in Clover: I can't seem to get NVIDIA driver to stick, when I select and restart its back to default macOS driver. This happened before to me, I can't remember what fixed it. Windows 10 option is missing from Clover. FIXED - changed audio ID back to 7 in Clover Audio stopped working again. Also. updated Clover via CC from v4392 to v4334. For some reason editing via Clover Config does not save settings, need to investigate!
  8. Thanks very much MaLd0n for that!! I copied over Clover and it seems to shutdown better now (spinning wheel on shutdown which wasn't there before). Also startup is much quicker. Also my PCI USB3.0 slots are working! Brilliant! Few problems: I can't seem to get NVIDIA driver to stick, when I select and restart its back to default macOS driver. This happened before to me, I can't remember what fixed it. Windows 10 option is missing from Clover. Audio stopped working again. I'll have a play with Clover Configurator I guess? And reinstall audio driver kexts. Thanks again
  9. Couldn't agree more! TM a very unhelpful site I have found, good if you know exactly what you are doing. Well what's the point in that? On the other hand must get frustrating answering same questions over again. So I dunno...
  10. Hello guys, having sometimes slow boot times, sometimes hangs on shutdown and HWmonitor does not work (rainbow spinning wheel). I'm embarrassed to say I installed Clover using a tool from another website, I would really love to do a fresh install and install DSDT's/kexts as I require them rather than some generic tool. I have read lots about DSDT's over several days but it's beyond my current knowledge how to modify them. I have followed a thread here and read a lot including here. I am including the tables and extracted IOReg. Hopefully some kind person could help me out? System specs: MacOS High Sierra 10.3.2 MB - Asus P6T Deluxe v2 (Bios 1202 - SLIC 2.1 modded for Windows activation) CPU - X5670 (Westmere) RAM - Corsair Dominator triple channel GPU- EVGA GTX970 SC Drives attached: 120GB SSD (Reserved/Legacy Windows partitions) 500GB SSD (NTFS storage) 2 x 1TB SATA (NTFS in RAID mirror) - I have this array hidden in MacOS 500GB SSD (EFI/OSX/RECOVERY) SATA Bluray writer Additional attached: PCI card for USB3.0 (generic type) - motherboard only supports USB 2.0 Working: Ethernet is working fine with Marvell88E8056.kext (inject with Clover preferred ?) WebDriver-378.10.10.10.25.106 installed and working Sound AD2000B working with AppleHDA Patcher and installed kext (can be patched on the fly - thread here ?) EFI>Clover>Other contains only FakeSMC.kext Hope this is not asking too much guys, really appreciate it! Thanks Chris Send me 877dev’s Mac Pro.zip Asus P6T deluxe v2 specs.zip Clover F4 AMLs.zip IOReg 877dev’s Mac Pro.zip CLOVER877backup 27-01-2018.zip
  11. SOLVED thanks to this thread and @fusion71au: http://www.insanelymac.com/forum/topic/306320-guide-dual-boot-with-windows-10-and-clover-legacy-or-uefi/?p=2165880 Basically due to my Windows legacy being installed with MBR, so Clover could not see it. Created EFI folder on Windows C: drive and copied over NTFS drivers over to Clover folder, working great now Had to edit config.plist manually to hide legacy drives.
  12. So having done some more reading I have been using Clover Configurator. In GUI section under "scan" I have selected custom and unchecked 'legacy', now only the MacOS and Mac Recovery options show in Clover. I have 'entries' ticked and created a custom entry, however when I select the Windows legacy boot partition "System Reserved (disk2)" is does not fill in the UUID. In fact using terminal there does not seem to be a UUID for that partition. diskutil list /dev/disk1 (internal, physical): #: TYPE NAME SIZE IDENTIFIER 0: FDisk_partition_scheme *128.0 GB disk1 1: Windows_NTFS System Reserved 104.9 MB disk1s1 2: Windows_NTFS WINDOWS 127.0 GB disk1s2 3: 0x27 906.0 MB disk1s3 I only get a UUID for the disk1s2 "WINDOWS": diskutil info /dev/disk1s1 | egrep -om1 "([A-Z0-9]{8}.[A-Z0-9]{4}.+$)” diskutil info /dev/disk1s2 | egrep -om1 "([A-Z0-9]{8}.[A-Z0-9]{4}.+$)" 720CDD76-7B7C-4F27-B3A2-99A7C056672D diskutil info /dev/disk1s3 | egrep -om1 "([A-Z0-9]{8}.[A-Z0-9]{4}.+$)” Any ideas?
  13. Ok so sorry for asking all these questions lately, I'm just trying to perfect my setup I just reattached all my Windows drives so I can setup dual boot. Attached to my PC I have: 120GB SSD (Reserved/Legacy Windows partitions) 500GB SSD (NTFS storage) 2 x 1TB SATA (NTFS in RAID mirror) 500GB SSD (EFI/OSX/RECOVERY) SATA Bluray writer In Clover I now have: Boot Windows Legacy HD1 Boot Windows Legacy HD1 Boot Windows Legacy HD1 Boot Windows Legacy HD1 Boot Windows Legacy HD2 Boot Windows Legacy HD3 Boot from High Sierra Boot Recovery from Recovery HD How is the best way to just have Windows, High Sierra and Recovery options only? (PS - I already used "diskejectd-master" to stop the 2 x RAID drives popping up with an error message in High Sierra) CLOVER877backup.zip
  14. An update appeared in the AppStore for 10.3.2 incremental update, I’ve run it and the option has now disappeared from clover and it’s installing. Maybe due to deleting IAProductInfo file? You were right it was a failed update problem. Next I want to look at DSDT. Thanks Ps it’s now rebooted and some setup screens, and back to desktop. Just installing latest NVIDIA drivers. Hi Trueman, that would make sense, worked fine for me just now
×