Jump to content
InsanelyMac Forum

bricamac

Members
  • Content count

    28
  • Joined

  • Last visited

About bricamac

  • Rank
    InsanelyMac Protégé
  1. Hi Is it working ? Thanks in advance
  2. I could install 10.6.5 on a Shuttle X50 with this specs: PROCESSOR Intel Atom 330 CPU CHIPSET Intel 945GC + ICH7 VGA Intel GMA 950 256bit 3D engine with a powerful 400MHz core and DirectX 9 3D hardware acceleration Dynamic Video Memory Technology(DVMT)3.0 supports up to 224MB of Video memory AUDIO Realtek ALC662 5.1 Channel High Definition audio ETHERNET RTL8111C 10MB/s,100MB/s,1GB/s LCD Panel 15.6" 16:9 Wide Panel, 1366 x 768 pixels … All work quiet fine except for the video . I could run the system with VESA mode. But if I patch my DSDT file i could active my GMA 950 card (device ID: 0x2772), but my internal screen isn't recognize. I could connect only an external screen.... how is it possible to activate the LVDS output on my GMA 950 card ? Thanks in advance.
  3. Introduction to the Shuttle X50 is with this specs: PROCESSOR Intel Atom 330 CPU CHIPSET Intel 945GC + ICH7 VGA Intel GMA 950 256bit 3D engine with a powerful 400MHz core and DirectX 9 3D hardware acceleration Dynamic Video Memory Technology(DVMT)3.0 supports up to 224MB of Video memory AUDIO Realtek ALC662 5.1 Channel High Definition audio ETHERNET RTL8111C 10MB/s,100MB/s,1GB/s LCD Panel 15.6" 16:9 Wide Panel, 1366 x 768 pixels … all seem nice to install macos on it… I could install 10.6.5 using PC EFI method without any problem ( PC EFI 10.6, DSDT modified with DSDTEditor, custom atom kernel). I could run the system with VESA mode. But if I patch my DSDT file i could active my GMA 950 card (device ID: 0x2772), but my internal screen isn't recognize. I could connect only an external screen.... So to see more, I have activated the remote manager then when I don't connect external screen , I could take a look the screen property( see the screen shot) Since severals days i try to be able to use my build-in screen but without any success. May you help me ? Seem my DSDT for my video: ..... Device (PEGP) { Name (_ADR, 0x00020000) Device (GFX0) { Name (_ADR, Zero) } Method (_DSM, 4, NotSerialized) { Store (Package (0x06) { "AAPL,HasPanel", Buffer (0x04) { 0x01, 0x00, 0x00, 0x00 }, "AAPL01,EDID", Buffer (0x80) { /* 0000 */ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, /* 0008 */ 0x00, 0x00, 0x17, 0x07, 0x00, 0x00, 0x00, 0x00, /* 0010 */ 0x0A, 0x0A, 0x01, 0x01, 0x0C, 0x1E, 0x17, 0xBE, /* 0018 */ 0xE8, 0x2D, 0xC9, 0xA0, 0x57, 0x47, 0x98, 0x27, /* 0020 */ 0x12, 0x48, 0x4C, 0x00, 0x00, 0x00, 0x01, 0x01, /* 0028 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, /* 0030 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, /* 0038 */ 0x00, 0xFE, 0x00, 0x53, 0x52, 0x58, 0x46, 0x61, /* 0040 */ 0x6B, 0x65, 0x45, 0x44, 0x49, 0x44, 0x0A, 0x20, /* 0048 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, /* 0050 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, /* 0058 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, /* 0060 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, /* 0068 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, /* 0070 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, /* 0078 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x5A }, "model", Buffer (0x07) { "GMA950" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } } } I found a problem that exist before with ubuntu ( https://bugs.launchpad.net/ubuntu/+source/x...tel/+bug/375545 ) but that have been resolve... perhaps that will talk to some Guru ;-) More information on the GMA card : 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer Device [1297:3151] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at fdf00000 (32-bit, non-prefetchable) Region 1: I/O ports at ff00 Region 2: Memory at d0000000 (32-bit, prefetchable) Region 3: Memory at fdf80000 (32-bit, non-prefetchable) Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: intelfb Thanks in advance for your help
  4. bricamac

    GMA950 id2772 working on it

    I have just get an old Shuttle X50, I could run 10.6.5 on it...but I still have a screen problem. Do you find a solution to be able to fix the problem with this gma950. Indeed if my modify my DSDT, I have a full support of my video card but only on external screen my internal screen still gray. Thanks in advance.
  5. I could install macos 10.6.5 on the SHUTTLE X50. I use PC EFI 10.6; a special Atom kernel to support Atom; a custom DSDT and the kerts ( AHCIPortInjector.kext, fakesmc.kext, OpenHaltRestart.kext, VoodooHDA.kext) what working: + sound + touch screen + Hyperthreading what not working: + video ( I didn't find solution to be able to set the native resolution of the LCD screen... if I activate the full support of the video card the internal screen isn't any more) + the webcam ( Product ID: 0x0505 Vendor ID: 0x05e3 (Genesys Logic, Inc.)) May someone could help us ? Thanks in avance.
  6. May you expain how you could use the webcam of the shuttle X50 ( Genesys logic webcam product ID 0x0505) on macos ? Thanks again in advance.
  7. Hi may I know how you install IPC 10.5.6 DVD because when I try to install on my Shuttle X50 using an external usb player ... I have got the message "System Config file /com.apple.boot.slist not found" . Thanks in advance.
  8. Hi, I have also a Fiono 330. I didn't succeed to get video. But I could connected on it remotely with the sharing function. May you give me you dsdt.aml file ? Thanks in advance.
  9. Hi, I would like to know if it's possible to install snow leopard on my new GIADA SLIM N10 ( CPU INTEL ATOM N330 Dual Core 1.6G; graphics core is NVIDIA Geforce 9400M; chipset based MCP7A; 2GB DDRII 800 Memory; 250G hard drive ) More information about the GIADA ( http://www.inchina.us/html/computers/compu.../0914/978.html) Because I have just done a simple test with boot123 cd ( I have disable the HT option on my ATOM ), but my computer simply reboot after tried to load my snow leopard DVD. Thanks in advance.
  10. Hi, I would like if it's possible to install snow leopard on my new GIADA SLIM N10 ( CPU INTEL ATOM N330 Dual Core 1.6G; graphics core is NVIDIA Geforce 9400M; chipset based MCP7A; 2GB DDRII 800 Memory; 250G hard drive ) More information about the GIADA ( http://www.inchina.us/html/computers/Memor...1006/5296.html) Because I have just done a simple test with boot123 cd ( I have disable the HT option on my ATOM ), but my computer simply reboot after tried to load my snow leopard DVD. Thanks in advance.
  11. Hi, May you explain me how to backup and restored the kernel from 10.5.6 to have HTT enabled ? Thank in advance
  12. I installed MACOS 10.5.8 ( but with an old kernel patched kernel from the 10.5.6 because the CPU don't have sse3) on my dell X1 very nice fanless ultraportable using iPC OSX86 Install Disc. Have replace the orignal HHD with an SSD Photofast G-Monster 1.8" 64BG Wifi work well ( I have changed the wifi original card) Sound work well ( thanks AC97 drivers...) Video quiet well ( I have sometime artefact ) Sleep work well ( but i have to set up a password into the bios...like this my screen can wake up too :-) bluetooth work well SD card reader work well LAN network not so well (Indeed my network interface doesn't have any mac address,) It's old ulraportable relive thanks to leopard
  13. Hi, I have just installed my dell D430 using IPCOSX86 10.5.6 then upgraded to 10.5.7, all's working quiet well: Sound OK Video with acceleration OK Sleep OK ( I should have to set password into the Bios) Lip Sleep OK Fan Control OK Wifi OK ( I change my wifi card) LAN OK But I am still have a problem with my card HSDPA DELL 5520. I could use it ( I have change the vendor ID and product ID into AppleWWANSupport.kext and AppleWWANSupport1.kext). But I couldn't find how to get my card to show up in the menu bar. My WWAN card's icon is an empty riangle, it says "The Card was not detected" when you click on it. How you have any idea to be able to see my HSDPA card into the WWAN.MENU ? Thanks again for your help.
×