Jump to content
InsanelyMac Forum

dakkie

Members
  • Content count

    61
  • Joined

  • Last visited

About dakkie

  • Rank
    InsanelyMac Protégé

Profile Information

  • Location
    Cracow/planet POLAND
  1. just a quick one... could you be so kind and explain me why Chameleon-2.0-RC5-r828 dectect my memory as 600Mhz instead of 667Mhz ? smbios.plist is set correctly. Geekbench also raports 600mhz ... please help
  2. dakkie

    10A421A in Software Update

    KP as well ...
  3. dakkie

    **Definitive CMOS Reset fix**

    i've tried but won't work with this code also. so i think that Phoenix Bios can't be solved this way.
  4. dakkie

    **Definitive CMOS Reset fix**

    this solution also not working for me ... i think that Phoenix Technologies Bios can't be solved this way ..maybe some other suggestions ?
  5. dakkie

    **Definitive CMOS Reset fix**

    so should i use both entries for Length 0x02 and 0x04 together like it is ? and Range Minimum and Range Maximum with both values 0x0070 and 0x0074 ? why's that ? help me understand
  6. dakkie

    **Definitive CMOS Reset fix**

    i've try this tweak but no success with my Acer lap with Phoenix Technologies Bios i compare my section for RTC with original MacBookPro3.1 RTC and they look the same Device (RTC) { Name (_HID, EisaId ("PNP0B00")) Name (_CRS, ResourceTemplate () { IO (Decode16, 0x0070, // Range Minimum 0x0070, // Range Maximum 0x01, // Alignment 0x08, // Length ) }) } and if i'll leave it like it is with 0x08 or change this to 0x02 Bios got still reset. any suggestions ?
  7. Big thx i'll try them soon and give you the shout.. PS . did you modified them somehow or just compiled .aml files ? cause i made .aml files and chameleon loaded successfully those tables as it was showed on startup. 3 of them loaded.. but still errors with ACPI_SMC_PlatformPlugin.kext
  8. dakkie

    Decompiled original Apple DSDTs

    Have somebody of You maybe MacbookPro2,1 dump ? i'm looking for this one couse it match 90% to my configuration so please helpme find MBP2,1 tables greetings
  9. i'm using chameleon posted here with SSDT and DSDT support. here are my SSDT files : SSDT.zip of course that i'm interresting. i also wondering that ModelID have something with it..couse i've checked plist for ACPI_SMC_PlatformPlugin.kext and i found there different ModelID's but only one entry for MacbookPro2,1 so i will try to config my SMBIOS list to get MacbookPro4,1 and check that will have some influence.
  10. GUYS, i've made as it was adviced in first post. i got run ./getSSDT5.sh command and i get 5 dsl files and one dsdt file. then i've try to run next step with ./iasl -sa command and i got some errors while compiling: MacBookPro:ssdtboot-chameleon2 dee$ ./iasl -sa SSDT-0.dsl Intel ACPI Component Architecture ASL Optimizing Compiler version 20080926 [Oct 4 2008] Copyright © 2000 - 2008 Intel Corporation Supports ACPI Specification Revision 3.0a SSDT-0.dsl 1: ACPI { Error 4095 - ^ syntax error, unexpected PARSEOP_NAMESEG, expecting PARSEOP_DEFINITIONBLOCK ASL Input: SSDT-0.dsl - 126 lines, 4715 bytes, 0 keywords Compilation complete. 1 Errors, 0 Warnings, 0 Remarks, 0 Optimizations i don't know what to do now ! please advice me how to fix my ACPI ... right now i'm running with AppleIntelCPUManagement form 10.5.7 with SMBIOS override for MacBookPro2,1 i'm using also CoolBookController that works fine so my CPU temp with normal usual work on laptop is about 68-78 C (2.33Ghz C2D) is it OK ? GeekBench 64bit result is : 3425 points http://browse.geekbench.ca/geekbench2/view/135796
  11. dakkie

    10.5.7 Released

    model 226BW works fine
  12. Coconup, i spend about 5 hours this night to find out what is all about and i found that my problem was HDAenabler that have configured wrong LayoutID ( i didn't check it before couse it was working with my kext before loaded from s/l/e ... after update i decide to use legacy kext loaded from e/e and that was my problem ...i try to use different HDAenabler and at last i got right one. so i re-configure all values (PINS and Paths) and now only one thing left and you maybe will help me with this to remove Sound assertion "0 == fMikeyDriver" failed in "/SourceCache/AppleHDA/AppleHDA-162.1.37/AppleHDA/AppleHDADriver.cpp" at line 1063 goto handler how to repair it ? i use 10.5.6 kext with legacy driver tweaked lightly by myself straight for Acer Aspire 9420 Legacy_HDA_for_9420_Aspire.zip
  13. coconup i got still same Log entires regarding this problem..(post above) no metter if i use 10.5.6 AppleHDA with Extra folder legacy kext of U or others.. with 10.5.7 same problem .. i wondering why ? why it happens with retail 10.5.6 HDA installed in s/l/e ? with new kext for .7 also (both retail HDA kexts) i cleared cache everything what needed to refresh it ... installed with kexthelper .. nothing helps me
  14. dakkie

    10.5.7 Released

    YES my works full res. with DVI using EFI strings for 7900GTX
×