Jump to content

superdooper71

Members
  • Content count

    14
  • Joined

  • Last visited

About superdooper71

  • Rank
    InsanelyMac Protégé
  1. Hi all, I hope someone can help me as I am struggling with this bloody installation. I am running on several problems that I can't face : ( First of all my config: Mobo: ASROCK H81M-DGS R2 CPU: Intel Xeon E3-1220 v3 @3.10ghz RAM: 16gb DDR3 1600Mhz SSD: Crucial BX100 120Gb SSD Monitor: Hp 27w Hdmi POST Installation CLOVER Current Issues: • System will not boot (clover boot loader do not shows up) from SSD - System boot only with USB stick • Screen Resolution is only 1024x768 • Monitor recognised as 17" instead of 24" • Monitor identified as secondary • Grafic Card Geforce GT710 shows 0 Mb • System info do not match Config.plistin Clover I attach screenshot of System Info, Kext in Clover, Resolution etc etc. Please can someonhelp me? Please can you tell me what is the Clover Parameter to activate when installing Clover (Clover_v2.4k_r4722) into Boot Disk? I hope someone can help me out of this little troble: ) Cheers Franco system info.tiff kext.tiff resolution.tiff system.tiff config.plist
  2. Hi there, I have tried so many times to update from 10.13.1 to 10.13.4 however it fails when tries to write the disc. I enclose the log with the error messages I hope that someone can help Cheers SD71 Log installazione 11-May-2018.txt
  3. superdooper71

    Sierra installation "appleacpicpu" stuck

    Ok I will complete the installation and post the files as per your requrst :wink_anim: :wink_anim:
  4. superdooper71

    Sierra installation "appleacpicpu" stuck

    Hi Mal0n, its working :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: :thumbsup_anim: I am pissed off for that I have spent more than a week for a little number fault !!!!! Thank you so much for your help
  5. superdooper71

    Sierra installation "appleacpicpu" stuck

    Hi Mal0n, my first try with gtx 1060 and nv disable=1 and is not working, my next attempt is with graphics video port 2 and lets see what happen
  6. superdooper71

    Sierra installation "appleacpicpu" stuck

    Hi Mal0n, ok i will try gtx 1060 and nv disable=1 over the weekend and let you know. Up until now a BIG Thank you for your support, I really appreciate your help
  7. superdooper71

    Sierra installation "appleacpicpu" stuck

    A little update, I am trying with the GT 710 plugged in and a boot argument "nv_disable=1" As a result I get a White screen with a small colored spinning wheel I attache a pix of what i get... Jeez is driving me nuts this build is driving me nuts... But I love ASROCK
  8. superdooper71

    Sierra installation "appleacpicpu" stuck

    yes but i will give a try again Just to make a change I will try with a GPU GT710 plugged and see what happen and let you know
  9. superdooper71

    Sierra installation "appleacpicpu" stuck

    Ok I have disabled the IntelHD from BIOS, however I still get the black screen. Just to clarify what I am doing - DVI cable plugged in the mobo - I am following this Guide http://www.insanelym...-kabylake-dsdt/ - Replaced "Clover Folder" with the Clover Installation provided by the Guide - Plugged in USB on a USB 2.0 port -Launched installation Installation starts but getting black screen Please help I am in real trouble now : ( Any suggestion on what could cause a black screen? Cheers Franco
  10. superdooper71

    Sierra installation "appleacpicpu" stuck

    Ok I will try Thanks again
  11. superdooper71

    Sierra installation "appleacpicpu" stuck

    Hi Mald0n, I have tried as per your instruction unfortunately at the very end of the progress bar the I get a black screen and I am not be able to see what is going on. I believe that the system is fully loaded and waiting the completion of installation and the black screen prevent me to complete the task. Any suggestion on that? Cheers Franco
  12. superdooper71

    Sierra installation "appleacpicpu" stuck

    thanx Mald0n, I will give you a try
  13. Hi all, I am trying to build a system with the following Components, but I am running into trouble ; ) ASRock Z270M Pro4 Micro ATX Intel Motherboard Intel Core i7-7700K Kaby Lake Socket 1151 CPU w/Intel HD Graphics 630 Crucial Ballistix Sport 32GB (2x16GB) 288-Pin DDR4 2400MT/s (PC4-19200) Desktop Memory Gigabyte Nvidia GeForce GTX 1060 3GB GDDR5 Graphics Card Uptown Cube Case mATX Cooler Master CPU cooling Tecnoware 650W Power Supply Kingston 120GB M.2 Solid State Drive (System only) Kingston SSDnow 256GB SATA3 SSD Seagate Barracuda 2TB Hard Drive Mac OSX Sierra 10.12.6 I have issues getting my 10.12.6 Sierra USB drive complete the installation. The system load the USB it starts and then freeze almost at the end. I booted in verbose mode and iget stuck on "appleacpicpu" I enclose the EFI folder completed with the config.plist I am using. Please can someone help me as I am struggling fromxmas and my little selfmade pressy turned as a nightmare : ) Cheers Franco
  14. superdooper71

    Introduce yourself.

    Hi guys, my name is Franco and I am writing from Rome, Italy. I am building few machines and I found that very challanging. I hope to to exchange and learn from all of you, hopefully i will became a proud hackintosher. Ciao Franco
×