Jump to content
Welcome to InsanelyMac Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.


  • Content count

  • Joined

  • Last visited

About Kailee

  • Rank
    InsanelyMac Protégé
  1. Fermi Freeze "Investigation"

    Sorry to bring up such an old topic, but... I've recently installed El Capitan on a Supermicro X8DAE with dual X5670s and an Nvidia Quadro K4000 and was getting the "NVDA Channel Exception" error. Solution was to; - Remove NullCPUPowerManagement.kext from /EFI/EFI/CLOVER/kexts/10.11 - Remove AppleTyMCEDriver.kext from /S/L/E (*edit: Forgot to add this one*) - disable Clover's CPUPM: <key>KernelAndKextPatches</key> <dict> <key>AppleRTC</key> <false/> <key>AsusAICPUPM</key> <false/> <key>Debug</key> <false/> <key>KernelCpu</key> <false/> <key>KernelHaswellE</key> <false/> <key>KernelLapic</key> <false/> <key>KernelPm</key> <false/> </dict> - enable Nvidia inject in Clover: <key>Graphics</key> <dict> <key>Inject</key> <dict> <key>ATI</key> <false/> <key>Intel</key> <false/> <key>NVidia</key> <true/> </dict> <key>NvidiaSingle</key> <false/> </dict> - Set the machine to be a MacPro3,1 (4,1 or 5,1 *don't* work for this board!) in config.plist SMBIOS section (use Clover Configurator to magic you a setting) - Specify all the RAM slots occupied so all of it was recognised; easiest to do this in Clover Configurator. Make sure you specify *all* entries like this: http://www.insanelymac.com/forum/topic/309226-os-x-is-only-recognizing-half-of-my-ram/page-2. This made *all* the difference, fully smooth 12-core/24-thread loveliness now. Hope this helps anyone - could have saved me a couple of evenings of frustration if I'd had this info. Kailee.
  2. Perfect Maniac10 thank you! Kailee.
  3. Hm well I reinstalled now being careful to install Clover to the System root... And just after I install the RealtekRTL8111 drivers to /EFI/CLOVER/kexts on the Yosemite partition the EFI System Partition reappeared on my desktop. Seems some system to this now - is there any way to get rid of it again? Many thanks, Kailee.
  4. Ok everything works now including FaceTime, iMessage etc. However; I (mistakenly?) installed Clover onto the EFI partition and now it gets mounted and shown on the desktop. Is there any way to to have it mounted? I already checked with disk for the partition type etc but it all looks the way it should... Anyone know how to fix this? thanks in advance, Kailee.
  5. ... never mind ... It went through a secondary install stage - didn't know it had to reboot once and carry on installing ... Everything except sound works but working on that now. Sorry for the noise. Kailee.
  6. Hi all, I have a legacy BIOS EP45-UD3LR, the clover install USB stick works fine to boot from, install starts fine, seems to end fine, but after reboot all that is on the new system disk is a folder called "OS X Install Data", and obviously this won't boot even from the Clover install USB stick. System disk (120Gb SSD) partitioned as GPT into 2 partitions; 64Gb "Yosemite" and remaining 55Gb "Data". Am I doing something wrong? Thanks in advance, Kailee.
  7. Hi Arsenicson, Dual display with the ADD-2 PCI-X works a charm here - on an Asus P5LD2-VM, I get the option for both mirrored display and dual independent displays, up to 1600x1200 (I have two Dell 2001FP's hanging on it). The quality on the analog, on-board connector is surprisingly good, but of course the DVI on the ADD-2 rocks. Can't say anything about any other cards (ATI or NVidia) since I haven't tried it yet. HTH, Kailee.