Jump to content

aerz

Donators
  • Content count

    27
  • Joined

  • Last visited

About aerz

  • Rank
    InsanelyMac Protégé
  1. Shutdown your PC, turn on and press F4 key when you watched the Clover bootloader screen. Then mount the EFI partition and go to /EFI/EFI/CLOVER/ACPI/origin/ put this folder on a .zip file and post it here.
  2. aerz

    Intel HD 630 acceleration

    I had the same problem few months ago, but I fix all the problems changing: DVMT pre-allocated to 192MB DVMT max to MAX SMBIOS 18,3 to 18,1 ig-platform-id=0x59120000 DVMT changes are based on this guide: https://www.insanelymac.com/forum/forums/topic/305710-guide-intel-hd-graphics-5500-on-os-x-yosemite-10103/
  3. aerz

    NVMe native support in 10.13 :)

    At the Installation screen first try pressing Windows key [=cmd in Mac] and 2 [number two key] See if the drive becomes visible to proceed.If the above does not display your disk: exit that screen and go to Utilities >Terminal on Terminal : type the following command to check if you can find your SSD: diskutil list Find your Disk's Identifier [Example: disk0] Now you type the command for Partition and Format [ to reduce problems use HFS+J (=MacOS extended (Journaled) format rather than APFS] diskutil partitionDisk /dev/disk0 GPT JHFS+ Highsierra 0b [# in place of disk0 type your disk's Identifier "HighSiera" is the name for your formatted SSD.You may change it to your liking] The partition and format may take just a few minutes Exit Terminal and Reboot Select your "High Sierra USB installer" from F-12 boot device selection screen. In CBM boot USB Installer with all required flags to reach Installation screen After language selection, go straight to High Sierra Installation to find your named SDD. Instructions by @cmn699 in other forum.
  4. Could you explain more about this?
  5. aerz

    NVMe native support in 10.13 :)

    Do you use HFSPlus.efi driver or VBoxHFS? Maybe you can get more speed by changing this.
  6. aerz

    Buen Año 2018

    Feliz año nuevo a toda la comunidad!
  7. aerz

    NVMe native support in 10.13 :)

    Yes, the patches about NVMe support is only for 10.12.x (macOS Sierra). On High Sierra you will see that works OOB.
  8. Sorry, It was a mistake. I read again the patch for NVMe (from Piker's blog) and It's only for macOS Sierra. I didn't notice this point. So, We will have to wait for a Clover patch to fix the slow boot.
  9. Did you try the NVMe patch to fix the slow boot?
  10. aerz

    Random freeze and SATA LED on

    When do you have those slowdowns? I only have after login password.
  11. aerz

    SSDT warnings for Intel i7 7700

    I solved the problem using PluginType=1 SSDT method. But, I found that in my case, this error could be ignored.
  12. Hi everyone, I'm trying to generate a SSDT for my Intel i7 7700 3.6GHz using the Piker's script (Beta), but I have some warnings that I can't solve it. Warning: Model identifier (iMac18,3) not found in..: /S*/L*/CoreServices/PlatformSupport.plist Warning: 'cpu-type' may be set improperly (0x0705 instead of 0x0905) - Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_typeWarning: 'system-type' may be set improperly (3 instead of 1) - Clover users should read https://clover-wiki.zetam.org/Configuration/ACPI#acpi_smartups I really stucked with the first warning, because I opened /S*/L*/CoreServices/PlatformSupport.plist and my Board-Id Mac-BE088AF8C5EB4FA2 exist, so what's the problem? Second warning is esthetic, ok, I could ignore according with some issues openned on the ssdtPRGen.sh respository. and the third warning, I think that I should change my config.plist (Clover) and set the key smartUPS with: <key>smartUPS</key> <string>3</string> but I'm not sure if is correct. Below, you can see the full report using the script, AppleIntelInfo.kext report (I'm not really sure if I need the SSDT) and I attached IOReg. ssdtPRGen.sh v0.9 Copyright (c) 2011-2012 by † RevoGirl v6.6 Copyright (c) 2013 by † Jeroen v21.5 Copyright (c) 2013-2017 by Pike R. Alpha ----------------------------------------------------------- Bugs > https://github.com/Piker-Alpha/ssdtPRGen.sh/issues < System information: Mac OS X 10.13.1 (17B48) Brandstring: "Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz" Version: models.cfg v171 / Kaby Lake.cfg v196 Scope (_PR_) {222 bytes} with ACPI Processor declarations found in DSDT (ACPI 1.0 compliant) Generating ssdt.dsl for a 'iMac18,3' with board-id [Mac-BE088AF8C5EB4FA2] Kaby Lake Core i7-7700 processor [0x906E9] setup [0x0705] With a maximum TDP of 65 Watt, as specified by Intel Number logical CPU's: 8 (Core Frequency: 3600 MHz) Number of Turbo States: 6 (3700-4200 MHz) Number of P-States: 35 (800-4200 MHz) Injected C-States for CPU0 (C1,C3,C6,C7,C8,C9,C10) Injected C-States for CPU1 (C1,C2,C3,C6,C7) Warning: Model identifier (iMac18,3) not found in..: /S*/L*/CoreServices/PlatformSupport.plist Warning: 'cpu-type' may be set improperly (0x0705 instead of 0x0905) - Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_typeWarning: 'system-type' may be set improperly (3 instead of 1) - Clover users should read https://clover-wiki.zetam.org/Configuration/ACPI#acpi_smartups Compiling: ssdt_pr.dsl Intel ACPI Component Architecture ASL Optimizing Compiler version 20140926-64 [Nov 6 2014] Copyright (c) 2000 - 2014 Intel Corporation ASL Input: /Users/aerz/Library/ssdtPRGen/ssdt.dsl - 364 lines, 11346 bytes, 73 keywords AML Output: /Users/aerz/Library/ssdtPRGen/ssdt.aml - 2365 bytes, 28 named objects, 45 executable opcodes Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations Do you want to open ssdt.dsl (y/n)? n bash-3.2# cat /tmp/AppleIntelInfo.dat AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved. enableHWP................................: 0 Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 1 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0x10d8415cd60 (32 MHz) MWAIT C-States...........................: 1319200 Processor Brandstring....................: Intel(R) Core(TM) i7-7700 CPU @ 3.60GHz Processor Signature..................... : 0x906E9 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 9 - Model................................ : 0x9E (158) Model Specific Registers (MSRs) ------------------------------------------ MSR_IA32_PLATFORM_ID.............(0x17) : 0x4000000000000 ------------------------------------------ - Processor Flags...................... : 1 MSR_CORE_THREAD_COUNT............(0x35) : 0x40008 ------------------------------------------ - Core Count........................... : 4 - Thread Count......................... : 8 MSR_PLATFORM_INFO................(0xCE) : 0x8080838F1012400 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x24 (3600 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 0 (LMP not supported) - Number of ConfigTDP Levels........... : 0 (only base TDP level available) - Maximum Efficiency Ratio............. : 8 - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x7E008006 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 0 (not enabled) - CFG Lock............................. : 1 (MSR locked until next reset) - C3 State Auto Demotion............... : 1 (enabled) - C1 State Auto Demotion............... : 1 (enabled) - C3 State Undemotion.................. : 1 (enabled) - C1 State Undemotion.................. : 1 (enabled) - Package C-State Auto Demotion........ : 1 (enabled) - Package C-State Undemotion........... : 1 (enabled) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x31814 ------------------------------------------ - LVL_2 Base Address................... : 0x1814 - C-state Range........................ : 3 (C-States not included, I/O MWAIT redirection not enabled) IA32_MPERF.......................(0xE7) : 0x2ADA92BCD7 IA32_APERF.......................(0xE8) : 0x2B68F51183 MSR_FLEX_RATIO...................(0x194) : 0x0 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x24A600002A00 ------------------------------------------ - Current Performance State Value...... : 0x2A00 (4200 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0x2A00 ------------------------------------------ - Target performance State Value....... : 0x2A00 (4200 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x88450000 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 0 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 69 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x641400 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 100 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x1CC1 ------------------------------------------ - EIST Hardware Coordination........... : 1 (hardware coordination disabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 0 (thermal interrupt not rerouted) - SpeedShift Technology Enable......... : 1 (enabled) - SpeedShift Interrupt Coordination.... : 1 (enabled) - SpeedShift Energy Efficient Perf..... : 1 (enabled) - SpeedShift Technology Setup for HWP.. : Yes (setup for HWP) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2A2A2A2A ------------------------------------------ - Maximum Ratio Limit for C01.......... : 2A (4200 MHz) - Maximum Ratio Limit for C02.......... : 2A (4200 MHz) - Maximum Ratio Limit for C03.......... : 2A (4200 MHz) - Maximum Ratio Limit for C04.......... : 2A (4200 MHz) IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1 ------------------------------------------ - Power Policy Preference...............: 1 (highest performance) MSR_POWER_CTL....................(0x1FC) : 0x3C005F ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 1 (enabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x42FFD0001AEA82 ------------------------------------------ - Package Power Limit #1............... : 3408 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 0 (disabled) - Time Window for Power Limit #1....... : 13 (20480 milli-Seconds) - Package Power Limit #2............... : 4090 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 0 (disabled) - Time Window for Power Limit #2....... : 33 (10 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x1FF3D5E ------------------------------------------ - Total Energy Consumed................ : 2044 Joules (Watt = Joules / seconds) MSR_PP0_POWER_LIMIT..............(0x638) : 0x0 MSR_PP0_ENERGY_STATUS............(0x639) : 0x1B2702D ------------------------------------------ - Total Energy Consumed................ : 1737 Joules (Watt = Joules / seconds) MSR_PP0_POWER_LIMIT..............(0x638) : 0x0 MSR_PP0_ENERGY_STATUS............(0x639) : 0x1B271D6 ------------------------------------------ - Total Energy Consumed................ : 1737 Joules (Watt = Joules / seconds) MSR_PP1_POWER_LIMIT..............(0x640) : 0x0 MSR_PP1_ENERGY_STATUS............(0x641) : 0x29E76 ------------------------------------------ - Total Energy Consumed................ : 10 Joules (Watt = Joules / seconds) MSR_PP1_POLICY...................(0x642) : 0x18 ------------------------------------------ - Priority Level....................... : 24 MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x24 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0x0 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0x0 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC3_IRTL...................(0x60a) : 0x884E MSR_PKGC6_IRTL...................(0x60b) : 0x8876 MSR_PKGC7_IRTL...................(0x60c) : 0x8894 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xBFED0E74E4 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xBFED56C6BC MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0 MSR_PKG_C7_RESIDENCY.............(0x3fa) : 0x0 MSR_PKG_C8_RESIDENCY.............(0x630) : 0x0 MSR_PKG_C9_RESIDENCY.............(0x631) : 0x0 MSR_PKG_C10_RESIDENCY............(0x632) : 0x0 MSR_PKG_C8_LATENCY...............(0x633) : 0x0 MSR_PKG_C9_LATENCY...............(0x634) : 0x0 MSR_PKG_C10_LATENCY..............(0x635) : 0x0 MSR_PLATFORM_ENERGY_COUNTER......(0x64D) : 0x0 (not supported by hardware/BIOS) MSR_PPERF........................(0x64E) : 0x2999B87955 ------------------------------------------ - Hardware workload scalability........ : 178672662869 MSR_CORE_PERF_LIMIT_REASONS......(0x64F) : 0x30000000 ------------------------------------------ - PROCHOT Status....................... : 0 - Thermal Status....................... : 0 - Residency State Regulation Status.... : 0 - Running Average Thermal Limit Status. : 0 - VR Therm Alert Status................ : 0 - VR Therm Design Current Status....... : 0 - Other Status......................... : 0 - Package/Platform-Level #1 Power Limit : 0 - Package/Platform-Level #2 Power Limit : 0 - Max Turbo Limit Status............... : 0 - Turbo Transition Attenuation Status.. : 0 - PROCHOT Log.......................... : 0 - Thermal Log.......................... : 0 - Residency State Regulation Log....... : 0 - Running Average Thermal Limit Log.... : 0 - VR Therm Alert Log................... : 0 - VR Thermal Design Current Log........ : 0 - Other Status Log..................... : 0 - Package/Platform-Level #1 Power Limit : 0 - Package/Platform-Level #2 Power Limit : 0 - Max Turbo Limit Log.................. : 1 (status bit has asserted) - Turbo Transition Attenuation Log..... : 1 (status bit has asserted) HDC Supported IA32_PKG_HDC_CTL.................(0xDB0) : 0x0 IA32_PM_CTL1.....................(0xDB1) : 0x1 ------------------------------------------ HDC Allow Block..................(0xDB1) : 1 (HDC blocked) IA32_THREAD_STALL................(0xDB2) : 0x0 MSR_PKG_HDC_CONFIG...............(0x652) : 0x2 ------------------------------------------ Pkg Cx Monitor ..................(0x652) : 2 (count package C3 and deeper) MSR_CORE_HDC_RESIDENCY...........(0x653) : 0x0 MSR_PKG_HDC_SHALLOW_RESIDENCY....(0x655) : 0x0 MSR_PKG_HDC_DEEP_RESIDENCY.......(0x656) : 0x0 IA32_TSC_DEADLINE................(0x6E0) : 0x10DB406B94E IA32_PM_ENABLE...................(0x770) : 0x0 (HWP Supported but not, yet, enabled) CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 8 ( 800 MHz) Maximum non-Turbo Ratio/Frequency........: 36 (3600 MHz) Maximum Turbo Ratio/Frequency............: 42 (4200 MHz) IGPU Info: ------------------------------------------ IGPU Current Frequency...................: 0 MHz IGPU Minimum Frequency...................: 350 MHz IGPU Maximum Non-Turbo Frequency.........: 350 MHz IGPU Maximum Turbo Frequency.............: 1150 MHz IGPU Maximum limit.......................: No Limit P-State ratio * 100 = Frequency in MHz ------------------------------------------ CPU P-States [ (8) 36 41 ] iGPU P-States [ ] CPU C3-Cores [ 0 2 4 6 ] CPU C6-Cores [ 1 2 5 6 7 ] CPU C7-Cores [ 2 3 4 5 6 ] CPU P-States [ 8 24 36 41 (42) ] iGPU P-States [ ] CPU C3-Cores [ 0 2 3 4 6 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 ] CPU C7-Cores [ 2 3 4 5 6 7 ] CPU C3-Cores [ 0 1 2 3 4 6 ] CPU P-States [ (8) 18 24 36 41 42 ] iGPU P-States [ ] CPU P-States [ (8) 18 24 36 39 41 42 ] iGPU P-States [ ] CPU P-States [ (8) 18 22 24 36 39 41 42 ] iGPU P-States [ ] CPU C3-Cores [ 0 1 2 3 4 6 7 ] CPU P-States [ (8) 18 22 24 28 36 39 41 42 ] iGPU P-States [ ] CPU P-States [ (8) 18 21 22 24 28 36 39 41 42 ] iGPU P-States [ ] CPU P-States [ (8) 18 21 22 24 26 28 36 39 41 42 ] iGPU P-States [ ] CPU C3-Cores [ 0 1 2 3 4 5 6 7 ] Thanks in advance!
  13. I checked the guide but I didn't see any reference about the pre and post script. My question is, Why we need this scripts and How I can know how to make this? Thanks in advice! Enviado desde mi Redmi Note 3 mediante Tapatalk
  14. aerz

    Random freeze and SATA LED on

    I try with disable option but I don't notice the difference.
  15. I deleted OsxAptioFixDrv-64.efi Also, I tried all the darkwake flags, and with darkwake=1/2/8 wake works but without graphics acceleration and with some black rendering. I attached a video for you. Really thanks for your replies, I will send you some beers soon for this help darkwake-video.zip
×