Jump to content

rtke333

Members
  • Content Count

    35
  • Joined

  • Last visited

About rtke333

  • Rank
    InsanelyMac Protégé

Contact Methods

  • Skype
    ogbratyo.cj

Profile Information

  • Gender
    Male
  • Location
    Hungary

Recent Profile Visitors

631 profile views
  1. rtke333

    Postinstall advice for 10.14.4 on Ga-Z68AP-D3

    I also see these so I think that is normal. also If you use "-v debug=0x100 keepsyms=1" bootargs then at panic the system won't reboot and you'll see the actual panic.
  2. rtke333

    Postinstall advice for 10.14.4 on Ga-Z68AP-D3

    With IGFX init, in my case the screen is not black on the AMD card. (internal HDMI is not connected, I just using the card) Please show me some informations about the kernel panic please. Set Inject Intel=True and try to boot. If your screen is black when booting with Init: IGFX, then try set to PEG, but Leave Internal Graphics Enabled (or auto). That is necessary to inject Intel graphics and use it's QuickSync inside the macOS.
  3. rtke333

    Postinstall advice for 10.14.4 on Ga-Z68AP-D3

    I have RX 580 8 GB(using as main) +i7-3770 iGPU HD 4000 (headless, but fully working, using for H.264 encoding) with the following: <key>Inject</key> <dict> <key>ATI</key> <true/> <key>Intel</key> <true/> </dict> <key>RadeonDeInit</key> <true/> <key>ig-platform-id</key> <string>0x0166000b</string> Without FakeIDs. The boot time is very fast for me. (~5 sec on SSD, didn't hang anywhere) Then at BIOS settings I set: - Init Display First: IGFX - Internal Graphics: Auto - Internal Graphics Memory Size: 128M - DVMT Total Memory Size : MAX VideoProc saying it's AMD Radeon but no, it's just a cosmetic bug. GVA info: Successfully connected to the Intel plugin, offline Gen7 Hardware acceleration is fully supported
  4. Thanks, I tried this too, but got nothing in the log.
  5. Hi! I have everything working on my Acer notebook, except FN + Brightness keys using VoodoPS2Controller.kext Now the brightness keys are "Pause+Break = Brightness Up" and "Fn+F12 = Brightness Down" working right now but they are not the actual keys. The actual brightness keys are "Fn+RightArrow = Brightness Up" and "Fn+LeftArrow = Brightness Down" but they are not working. The problem is I don't know the codes. Installed ioio and enabled debugging to console: Pause/Break is generating: "ApplePS2Keyboard: sending key e045=71" which upper the brightness Fn+F12 is generating: "ApplePS2Keyboard: sending key 46=6b" which lower the brightness Fn+RightArrow/LeftArrow generates nothing. Keyboard attached to PS2K Then I used rehabman's guide to enable ACPIDebugging, Installed kext to L/E, Debug methods (Instrument EC Queries, Add DSDT Debug Methods) to DSDT, but there are no codes generated to the log. Attaching debug folder. Also I don't know if it will help, but on Linux I got a code from decreasing/rising brightness with Fn+Left/RightArrow keys: Fn+RightArrow: "0xe0 0x54 0xe0 0xd4" Fn+Left: "0xe0 0x4c 0xe0 0xcc" Also I love using EMlyDinEsH's SmartTouchpad Driver, with that all of my Fn keys are working except Brigtness keys ofc. If there are any fix I would like to use that with the smarttouchpad driver. EMlyDinEsH's SmartTouchpad Driver: https://osxlatitude.com/forums/topic/1948-elan-focaltech-and-synaptics-smart-touchpad-driver-mac-os-x/ Specs in my signature. Please help me fix this very last issue on my acer. debug_4751.zip
  6. Acer Aspire V15 V5-591G - Mojave 10.14.4 (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.) Specifications: - Motherboard: USOPP_SLS (Skylake-H PCH) - BIOS:Insyde Corp. v 1.15 - CPU:Intel Core i5-6300HQ 2.3 GHz (Skylake) - GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530 - RAM:SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz - WiFi + Bluetooth:Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth) - Audio:Realtek HD Audio: ALC 255 - Ethernet: Realtek RTL8168/8111 - Card Reader:Realtek USB 2.0 Card Reader (USB2.0-CRW) - Webcam:HD Webcam - HDD:TOSHIBA MQ01ACF032 320 GB HDD - SSD:SPCC M.2 230 GB SSD - Display:1366x768 (15.6", Matte) - Battery: 6 cell 56Wh / 5040mAh - Connectors: 1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad:Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard. Working: - Wi-Fi (with BCM94352Z) - Bluetooth hand-off (With BCM94352Z) -Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile) - Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color) -HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch - Audio (ALC 255):(Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17) - Ethernet Realtek 8168/8111: RealtekRTL8111.kext - App Store, Messages, FaceTime, Siri, iCloud(native) - Integrated webcam(native) - 3.0 USB (native) - Touchpad and Keyboard(ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers - Battery info:Install ACPIBatteryManager.kext with Kext Utility or other installer. - Sleep Mode - SSD with TRIM enabled (to enable trim, open Terminal and write "sudo trimforce enable") Not working: - Original Wi-Fi (Qualcomm Atheros QCNFA344A): unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle. - NVIDIA GeForce GTX 950M: Optimus not supported. - Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: "USB2.0-CRW" Prod ID: "0x0129" Ven ID: "0x0bda (Realtek Semiconductor Corp.)" For Wi-Fi: - 1st method:You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it -2nd and I think the best method:Replace your M.2 Qualcomm Card with a compatible BCM94352Zcard (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareData.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon Issues: - None BIOS Settings: - BIOS version 1.15 (irrelevant) - Secure Boot: Disabled - Touchpad: Advanced - Boot mode:UEFI Getting ready for Installation: - Download the install zip (bootpack & postinstall): Click here -> acer_aspire_v591g_installfiles.zip Installation: - Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager) - Copy my Clover folder to the USB's EFI folder - Boot with the Installer USB - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.cfg" -> you'll have more informations about the freeze Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation! If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"): ->Edit "Frequency" and "Size" to match your RAM values <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict> PowerManagement fix: Set HWPEnable=YES in Clover (already set), CPUFloor to "700", Frequency to "2300" and "3200"(Normal and Turbo, if you have i7-6700HQ version then it should be "2600", "3500") and "FrequencyVectors" from "0x0d000000" to "0x07000000" in "S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist", MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change "MatchOS" to 10.13): <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows. Elan SmartTouchpad I only use scrolling, one-, double- & tripletap If you want to try other gestures go to this link for more informations, options (v4.7 beta 5) -> DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling). Before updating to a new version of Mojave please update kexts (and clover if necessary) to newer versions to avoid kernel panics. Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New) Mojave & Windows 10 Dual-Boot: Dual-boot clean install (on one drive), UEFI Only: Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac), Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart, Boot into your Win installer, Format the partition you created for Win, install. Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi 5. You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition). Dual-boot with Windows installed first (on one drive), UEFI Only: If you already have Windows and you don't want to lose all your data there is a hope: I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI You need bootable Mac Installer and a full system restore image (link is in my video's description). (You may see errors if your EFI partition is not 200 MB) Boot into your Windows, resize your partition or create one for Mac. Boot into your Mac installer and in Disk Utility format the partition you created. Restore from image: select your full system restore image. When it's finished restoring you just need to restart, then boot to the system with your usb. When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart. Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi 7. You're done! You can select your old Windows and your new macOS! (Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.) IF YOU GETTING ERRORS DURING MAC RESTORE: - Make sure you have partitions in GPT - Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors. IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc): - Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB) IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found): - It's because your EFI is not 200 MB or not an "Apple" original EFI, but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem) - You also could "mount" the EFI from Windows: 1st method: open cmd in administrator mode and type: diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part(Select System type partition, for example 2) sel part 2 assign letter=b(This will "mount" your EFI partition) Open Explorer++ or TotalCommander in administrator mode to manage EFI remove letter=b (This will "unmount" your EFI) 2nd method: open cmd in administrator mode and type: mountvol b: /s (This will mount your EFI) Open Explorer++ or TotalCommander in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI) Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)! Notes: 2019.04.25: Optimized touchpad scrolling -> updated install files 2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack 2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack. 2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack. 2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" -> fixed freezing during boot. Fixed brightness levels by installing "AppleBacklightFixup.kext". Also updated bootpack & postinstall zip down in attachments. 2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments "acer_aspire_v591g-55tu_clover.zip"-> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes). 2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why) 2018.12.09: Updated to 10.14.2 -> did without any complication 2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext 2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by "AppleIntelSKLGraphicsFramebuffer.kext" rollback from 10.14. 2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding "AppleGraphicsDevicePolicy.kext" patches to config.plist, HDMI audio not working
  7. Fixed SATA problem with : new ICH patch by vit9696. AppleAHCIPort Find 40600200 Replace 00000000 You're right guys, but I didn't have a DP to HDMI adapter. Now I got one, so I tested it: Got signal on my 1st monitor with DP -> HDMI Installed Mojave without problem, booted to desktop. -> HDMI ports are not working, just DP. Looking for a solution.
  8. Hello! I had a working Sierra 10.12.6 Setup. Mobo: GIGABYTE P61-USB3-B3 (H61 Intel 6 series Chipset, Cougar point, No IGPU, only discrete, Legacy BIOS) CPU: i5-2300 2.9 GHz (Sandy Bridge) GPU: MSI Radeon RX 580 8GB 1. Yesterday I tried to install Mojave but I can't get to the installation screen, I getting black screen after booting. I have 2 HDMI monitor, they have signal, just black. - I think this problem is related to AppleGraphicsDevicePolicy, so I used iMac14,2 smbios instead of iMac12,2 -> nothing changed, same black screen. - Used several AppleGraphicsDevicePolicy patch, nothing changed. And if I understand correctly I have to change the value to "none" in Info.plist, but I can't even get to the install screen, so I can't modify the Info.plist. - Some users can get signal when using DP ports, but my monitors don't have DP connectors, just HDMI. - Tried WhateverGreen + Lilu (same happens without them) and Inect ATI = true, RadeonDeInit = true (same without deinit) - My motherboard doesn't have IGPU, so I can't enable that, i'm just on the discrete. - Some users got to the installation screen by enabling CSM: my motherboard is Legacy BIOS (with Hybrid EFI technology) I don't have CSM option - At Sierra it's good, my 2 monitor recognized correctly. So maybe if I will able to edit that Info.plist I can finally have signal, I don't know. Appreciate any help. UPDATE: Got signal on my 1st monitor with DP -> HDMI Installed Mojave without problem, booted to desktop. -> HDMI ports are not working, just DP. Looking for a solution. 2. 2nd problem is that my SATA drive doesn't appear in Disk Utility. - At Sierra no problem - High Sierra, no drives -> fixed by restoring AppleAHCIPort.kext v328 to S/L/E - This problem maybe related to my chipset, because maybe that is not supported anymore (Intel 6 Series chipset, H61) - At Mojave I tried to modify the BaseSystem.dmg in the Mojave Installer.app to restore AppleAHCIPort.kext v328 -> My drives got recognized but not initialized, also broke the partition and I have to reformat. - Tried another AHCIInjectors, nothing changed. - AHCI-SATA: Enabled in BIOS -> Fix in #4 Post CLOVER_legacy_p61.zip
  9. Hi! Could anyone help me installing High Sierra on this system? I succesfully installed Sierra before on this system with help of Jake Lo (thanks!!), I just wondering if could High sierra possible to installed on this system? Boot stopped at this. I'll attach my Clover folder and a picture from boot. UEFI enabled, and for skylake I used IntelGraphicsDVMTfixup and IntelGraphicsFixup kexts. My bios is very limited and does not have any option to change dvmt prealloc or anything else. Everything works fine on Sierra. Here is my system: THIS TOPIC IS OUTDATED AND WILL NO LONGER UPDATED. PLEASE GO TO THIS LINK FOR GUIDE & UPDATED FILES: https://www.insanelymac.com/forum/topic/338103-guide-acer-aspire-v-15-v5-591g-mojave-windows/ Acer Aspire V15 V5-591G-55TU (Note: Bootpack works fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.) Mobo: Skylake USOPP_SLS Bios: Insyde corp latest version CPU: Intel Core i5-6300HQ 2.30 GHz (Skylake) GPU: Geforce GTX 950M 2 GB (optimus, disabled), Intel HD 530 Ram: 8 GB DDR4 (4+4 GB) Wifi: Qualcomm Atheros QCNFA344A, Replaced to BCM94352Z Ethernet: Realtek 8168B/8111B Audio: ALC 255 (layout-3 fix) Card Reader: Realtek HDD: 1 TB Dual-boot with Windows 10 Any help appreciated! UPDATE! (2017.10.30) UPDATE! (2017.11.09) UPDATE! (2018.02.01) Successfully installed High Sierra 10.13, 10.13.1, 10.13.3 SEE THIS POST: #49 IF YOU THINK YOUR CPU IS HOT (60+°C) OR NOT GOING UNDER 1.3GHz FREQUENCY WHEN IDLE (Original OSXLatitude post link: http://forum.osxlatitude.com/index.php?/topic/10077-success-acer-aspire-v-15-v5-591g-55tu-high-sierra-dual-boot-windows/) Working: Wi-Fi and Bluetooth with BCM94352z: (enabled with BrcmFirmwareRepo.kext, BrcmPatchRAM2, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, install them with Kext Utility or another kext installer) (Original WiFi is Qualcomm Atheros, unsupported but BT works) Hand-off with BCM94352z Full Graphics enabled on HD 530, HDMI, VGA. ALC 255 Audio: (Internal Speakers, Internal Microphone, Headphone jack (microphone not tested) with layout-3 fix (you can use AppleHDAPatcher) Ethernet Realtek 8168B/8111B App Store, Messages, FaceTime, Siri, iCloud (native) Integrated webcam (native) 3.0 USB (native) Touchpad and Keyboard: Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn. (VoodoPS2Controller.kext) Battery info: Install ACPIBatteryManager.kext with kext utility or other installer. Sleep Mode: In High Sierra sleep mode not worked for me natively. Inject custom EDID to fix the blank screen after wake from sleep See here for instruction (thanks black.dragon74 and Jake Lo !!) Please add these 2 patches to ACPI\DSDT\Patches in your config.plist in order to avoid not responding applications after sleep: (added in "v5_591g_55tu_updated_CLOVER.zip") HECI to IMEI 48454349 494d4549 EC0 to EC 4543305f 45435f5f Before updating to a new version of High Sierra please update kexts to new versions to avoid kernel panics Note: No need for "IntelGraphicsDVMTFixup.kext" so you should delete it. Not working: Original Wi-Fi: Qualcomm Atheros QCNFA344A unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle. NVIDIA GTX 950M: Optimus not supported. Card Reader: Unsupported For WiFi: You can choose an external USB wifi dongle (I used tp-link Archer T1U (5GHz support), Tp-link have official macOS drivers, you just need to install it (OR)Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kext I wrote above I'll attach my EFI folder for anyone who want to install High Sierra (acer_aspire_v5_591g_55tu_hs.zip). *REUPLOADED updated CLOVER folder, attached as "v5_591g_55tu_updated_CLOVER.zip" (uploaded to OSXLatitude forum, can't upload here). I'm using High Sierra in Dual-boot with Windows 8.1. To do this in a clean install or with Windows installed first try my little minimal guide: Dual-boot clean install (on one drive): 1. Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it's no matter what), 1 for Mac), 2. Install Mac, boot with your USB, *mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder, copy the CLOVER folder I attached to the EFI folder, restart, 3. Boot into your Win installer, Format the partition you created for Win, install. 4. Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type: bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi 5. You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition). Dual-boot with Windows installed first (on one drive): If you already have Windows and you don't want to lose all your data there is a hope: You need bootable Mac Installer and a full system restore image (you can search for it). (You may see errors if your EFI partition is not 200 MB) 1. Boot into your Windows, resize your partition or create one for Mac. 2. Boot into your Mac installer and in Disk Utility format the partition you created. 3. Restore from image: select your full system restore image. 4. When it's finished restoring you just need to restart, then boot to the system with your usb. 5. Do Step 2. from "*" from clean install dual-boot above. but KEEP "Microsoft" FOLDER IN IT! 6. Do Step 4. from clean install dual-boot above. 7. You're done! You can select your old Windows and your new macOS! (I only tried with Windows 8/8.1/10. I don't know Windows 7,etc.) IF YOU GETTING ERRORS DURING MAC RESTORE: Make sure you have partitions in GPT The best version for restore method is Windows 8.1. It's using 200 MB EFI. Windows 10 using 100 MB EFI and will annoy the Mac restore. You can use with Windows 10, just ignore the errors IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc): Make sure you have GPT partitions, and GPT installer IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found) It's because your EFI is not 200 MB or not an "Apple" original EFI, but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem) You also could "mount" the EFI from windows, for that open cmd and type: diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition, to manage files download totalcmd or explorer++ (run as admin)) remove letter=b (This will "unmount" your EFI) Here is a video from dual-boot with Windows installed first (on one drive): https://www.youtube.com/watch?v=0_Q8uPkwcWQ Here some pictures:
  10. @matey82 Give a try, add these to "ACPI\DSDT\Patches" in your config.plist <dict> <key>Comment</key> <string>change HECI to IMEI</string> <key>Disabled</key> <false/> <key>Find</key> <data> SEVDSQ== </data> <key>Replace</key> <data> SU1FSQ== </data> </dict> <dict> <key>Comment</key> <string>change EC0 to EC</string> <key>Disabled</key> <false/> <key>Find</key> <data> RUMwXw== </data> <key>Replace</key> <data> RUNfXw== </data> </dict>
  11. thanks btw, what is this "PluginType" key?
  12. <key>PluginType</key> <string>1</string> Enabled in my cfg
  13. Okay, here you go new_ioreg_2.ioreg.zip
×