Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Try removing AppleHDA.kext and RealtekR1000.kext, trash Extensions.mkext and reboot at darwin prompt -v -f
Just us this boot disc http://www.mediafire.com/?uwd9dtttjfk When you get to the Darwin prompt eject the disc put in your retail disc and partition and install with that. For instruction google Boot-132.
The Universal OSx86 Installer is for use with a retail copy of Leopard, so that could be part of your problem. Also you will have less headaches if you put vista on a second drive. If you have a retail copy follow the instructions for the Universal OSx86 Installer, first you need to update your bois to f5 and here are the bios setting. BIOS Settings: Gigabyte GA-P35-DS3L (rev 1.0 or rev 2.0) with F7 or newer BIOS Gigabyte GA-EP35-DS3L with F5 or newer BIOS Standard CMOS Settings: [set Date] [shows your Hard Drives] Drive A [None] Floppy 3 Mode Support [Disabled] Halt On [No Errors] Advanced BIOS Settings: Hard Disk Boot Priority [Press Enter] First Boot Device: [CDROM] Second Boot Device: [Hard Disk] Third Boot Device: [None] Password Check: [setup] HDD S.M.A.R.T. Capability [Enabled] Limit CPUID Max. to 3 [Disabled] No-Execute Memory Protect [Enabled] CPU Enhanced Halt (C1E) [Enabled] CPU Thermal Monitor 2(TM2) [Enabled] CPU EIST Function [Enabled] Full Screen LOGO Show [Disabled] Init Display First [PEG] Integrated Peripherals: SATA AHCI Mode [Enabled] SATA Port0-1 Native Mode [Disabled] USB Controller [Enabled] USB 2.0 Controller [Enabled] USB Keyboard Support [Enabled] USB Mouse Support [Enabled] Legacy USB storage detect [Enabled] Azalia Codec [Auto] Onboard H/W LAN [Enabled] > SMART LAN [Press Enter] Onboard LAN Boot ROM [Disabled] Onboard IDE Controller [Enabled] **Onboard SATA/IDE Device [Enabled] * EP35 only **Onboard SATA/IDE Ctrl Mode [iDE] * EP35 only Onboard Serial Port 1 [Disabled] Onboard Parallel Port [Disabled] *Parallel Port Mode [sPP] * EP35 only - disables when Onboard Parallel Port is disabled Power Management Setup: ACPI Suspend Type [s3(STR)] Soft-Off by PWR-BTTN [instant-Off] PME Event wake Up [Disabled] Power On by Ring [Disabled] Resume by Alarm [Disabled] HPET Support [Enabled] HPET Mode [64-bit mode] Power On By Mouse [Disabled] Power On By Keyboard [Disabled] AC Back Function [soft-Off] Then choose the P35-DS3L plugin for the Universal OSx86 Installer, just remember to partition the hard drive using GUID.