Jump to content


  • Content Count

  • Joined

  • Last visited

Reputation Activity

  1. Like
    Loloflat6 reacted to fabiosun in OpenCore Discussion   
    Here you can find a simple utility to download latest OC bootloader version
    in download section also a nice script (downloader utility) to build latest release available on GitHub 

  2. Like
    Loloflat6 reacted to Shaneee in AMD Vanilla Kernel   
    AMD OS X is proud to announce that native macOS is available on Ryzen CPUs thanks to AlGrey. No need to use a patched kernel/prelinkedkernel. This is currently being classed as beta support and other CPUs are being worked on.

  3. Like
    Loloflat6 reacted to nmano in [pre-release] macOS Mojave 10.14.4   
    Hi @PMheart
    Sleep and wake issue i9 9980XE
    Finally fixed
    Comment xcpm_core_scope_msrs © Pike R. Alpha
    Find   31D2E891 FCFFFF
    Replace  31D29090 909090

  4. Like
    Loloflat6 reacted to DSM2 in AMD Radeon Vii in macOS Mojave   
    Time to make things clear...
    As already mentioned by me in the German community @trueadm posted in the thread of @KGP-iMacPro that the VII only runs when the IGPU is on in the bios.
    The whole thing didn't leave me any peace today and I wanted to know it exactly, so I set up a small test setup.
    Since I was missing a CPU cooler, I had to improvise a little, as you can easily see.
    Don't worry all parts live and CPU was kept constant at 53/54 degrees
    What turned out now ?
    Yes, the card has acceleration when you edit the kext but ONLY!! :
    a) the IGPU is active or
    b) basically there is a helper card in it
    If both are not available then the behavior already determined by @KGP-iMacPro or myself mentioned from day one.

  5. Like
    Loloflat6 reacted to nmano in X299 WU8 with Intel Core i9-9980XE   
    X299 WU8 with Intel Core i9-9980XE

    Gigabyte   X299 WU8
    Intel Core i9-9980XE Extreme Edition Processor
    CORSAIR Vengeance RGB 64GB (4x16GB) DDR4 3200MHz C16 Desktop Memory
    Corsair H115i RGB
    Samsung SM 970 500GB
    Sapphire Radeon RX Vega 64
    I already own
    Cooler Master COSMOS
    WIFI card Broadcom BCM943x
    FireWire IEEE-1394a OHCI Controller
    I like this  X299 server board some reason. Because this motherboard has 7 PCIex16  Slots design.
    Support Thunderbolt 3,PCIex4 M.2,USB 3.1,ALC 1220, Two RGBW Pin Headers.
    This board has 2 x USB 3.1 Gen 1 headers but not 2.0 headers.

    Bios Settings
    Extreme Memory Pro­file (X.M.P.) set to Pro­file 1
    Change your CPU Clock Ratio 30 to 42
    In Advanced CPU Core Settings
    Set Enhanced Multi-Core Performance to Enabled
    Set Energy Effi­cient Turbo to Disabled
    Eist Enabled
    C6/C7 Enabled
    machdep.cpu.brand_string: Intel(R) Core(TM) i9-9980XE CPU @ 3.00GHz
    This CPU support natively XCPM Because I don’t use any kernel patches or FakeCPUID

    Sapphire Radeon RX Vega 64
    Open Clover Configurator thick RadeonDelnit
    Support kexts

    I don’t rename some devices names via ACPI
    But Clover loader renames Automatically this devices GFX0,HDAU,HDEF
    I am very excited.

    This motherboard USB ports support natively. Because I don’t use any USB Injector.But I use port limit patched.
    Sleep work Now
    Comment xcpm_core_scope_msrs © Pike R. Alpha Find 31D2E891 FCFFFF Replace 31D29090 909090 System-wide power settings: Currently in use: autorestart 0 Sleep On Power Button 1 hibernatefile /var/vm/sleepimage proximitywake 1 powernap 1 networkoversleep 0 disksleep 10 sleep 0 hibernatemode 0 ttyskeepawake 1 displaysleep 60 womp 1 Bluetooth
    Bluetooth has USB 2.0 header My Motherboard has 3.1 header
    I thing I need USB 3.1 to 2.0 Adapter.
    PCI Slot Information

    I update some SSDT for X299
    All in one X299 All in one.zip
    X299 Each Devices 17 SSDT.zip
    I update EFI.zip
    If you like DSDT patches
    #Remove all SSDT in your EFI
    Before patch you have to Add ACPI patch in Clover Config
    Comment PC00 -> PCI0
    Find        50433030
    Replace   50434930
    XHCI for USB 3
    And more enjoy.
    If you like Go to Gigabyte web site->Products->Server Motherboard->Professional Motherboard->X299-WU8


    I really thank for everyone who support and help to this success.
    I update kexts.
    X299_Injector USB 3.kext.zip
  6. Like
    Loloflat6 reacted to Dwarfy in Clover General discussion   
    Perhaps this might help you 
  7. Like
    Loloflat6 reacted to yapan4 in Clover General discussion   
    Hi. @Loloflat6
    For Mojave you need new kernel patches. Kernel patches from HS do not work on Mojave.
    The best way is  unlocked BIOS from the manufacturer. Write them...
    Our situation on С422 is slightly different and worse than yours.
    Good luck!
  8. Like
    Loloflat6 reacted to obus in ThunderBolt Drivers   
    Can confirm that GC-TitanRidge is working flawlessly OOB on my rig and exact as KGP point out in earlier posts using SSDT-X299-TB3HP-TTR.aml.
    The only hiccup for me is that I need to eject connected THB and USB-C-disks before sleep otherwise my rig will wake up to a black screen.
    As I understand this is a "normal" behaviour for everybody with a connected GC-Titan ridge card.
  9. Like
    Loloflat6 reacted to KGP-iMacPro in ThunderBolt Drivers   
    Cool, many thanks for this important confirmation!  
    Let’s see if we are able to remove the last issue of a black screen on wake with TB or USB-C drives connected to the GC-Titan Ridge 
  10. Like
    Loloflat6 reacted to KGP-iMacPro in ThunderBolt Drivers   
    @augustopaulo, I rather think the opposite! 
    This adaptor or your current configuration might be a unique opportunity to shed new light onto the entire TB Hackintosh story.. we just don't know yet why and in which way. The only thing I would like to ask you: please never return it to the manufacturer until we deeply investigated cause and effects of your recent discovery.. 
    Generally I don't think that it is a good idea to mix things between Windows and macOS.. Don't forget that we are dealing with UEFI.. thus specific settings under some certain operating system might affect the adopters functionality in the other operating system. Me myself many times I even reached to a situation where the removal and replugging of the adopter was the only possibility to make the adopter work again under any system.
    Also don't be scared that the adopter is not fully functional and reveals errors.. While we might miss some of your implementations and functionalities you might miss some of our implementations and functionalities.. The fusion and merge of our different implementations, results, discoveries, and experiences might lead to some breakthrough though.. We have to wait and see..   
    Thus please, once more don't request any RMA for the adopter. It is a 50$ investment that could change many things! I rather encourage you to purchase a second adopter to see whether or not you would be able to replicate the same effects with an else unchanged system configuration.  
  11. Like
    Loloflat6 reacted to augustopaulo in ThunderBolt Drivers   
    Yes, header cable always connected.
    As for version, see if you can see it from the 2 photos I've taken.. (my son is using the PC for now) and don't look at the dust!!
    But, later today I'll take it out an take proper pictures...

  12. Like
    Loloflat6 reacted to augustopaulo in ThunderBolt Drivers   
    Hi KGP-iMacPro, 
    Point well made.
    I won't return it/RMA, I promise!
    Now, tell me (& others) what do you want me to further test this Asus TB3 adapter, ok ?
  13. Like
    Loloflat6 got a reaction from KGP-iMacPro in ThunderBolt Drivers   
    Yes , yesterday night I compiled a SSDT with appropriate parts from this DSDT and no miracle...
    ( even with adjusting thunderbolt settings in bios) 
  14. Like
    Loloflat6 got a reaction from lelet in ThunderBolt Drivers   
    I have sucessefully connected an USB C ethernet PCi on USB C TB EX3  and internet connection 10/100/1000 was right pass through in.
  15. Like
    Loloflat6 reacted to lelet in ThunderBolt Drivers   
    I also wanted to bring my experience because I currently have the hotplug working properly without using strange tricks.
    Gigabyte recently released an BIOS update for the Z370 motherboard, which adds compatibility to the new 9th Gen processors.
    I had read earlier that the Z390 chipset would bring greater compatibility with the Thunderbolt connection, and I think this BIOS update brought some of these changes.
    In fact now, not only do I have new Thunderbolt settings in the BIOS, but the hotplug also works perfectly with the THB_C header connected!
  16. Like
    Loloflat6 got a reaction from KGP-iMacPro in ThunderBolt Drivers   
    Yes , yesterday night I compiled a SSDT with appropriate parts from this DSDT and no miracle...
    ( even with adjusting thunderbolt settings in bios) 
  17. Like
    Loloflat6 reacted to KGP-iMacPro in ThunderBolt Drivers   
    Looks rather like a miracle... or to say it in simple words... you are the one out of millions not affected by the virus... and nobody knows why.. 
    My goodness... you have a fully implemented local thunderbolt node

    and even the thunderbolt bus driver loaded 

    While usually in TB Hackintosh systems only the IOThunderboltFamily.kext and ThunderboltNHI.kext are active, you also have the AppleThunderboltDPAdapaterFamily.kext, the AppleThunderboltDPOutAdapter.kext, the AppleThunderboltIP.kext  the AppleThunderboltPCIDownAdapter.kext active on your system.. 
    Some TB kexts not marked in red are still missing though also on your system.. 

    Anyway.. no idea how all this is possible without doing anything else then configuring the TB BIOS settings like we all did?
    You do not even mention a SSDT, although I do not understand how you obtain without the latter the UPSB, DSB0, DSB1, DSB2, DSB4, NHI0 and XHC2 ACPI implementation.. 
  18. Like
    Loloflat6 got a reaction from Cyberdevs in Possible frame rate issues with AMD Sapphire Pulse RX 580 4GB and 10.13.5   
    Yes because before that I went back to MacPro 6,1 system definition , so I will manage now a fresh install Mojave 10.14 (18A389) with iMac Pro 1,1 system definition 
    Your settings will help all users with AMD RX 580 on Mojave
  19. Like
    Loloflat6 reacted to Cyberdevs in Possible frame rate issues with AMD Sapphire Pulse RX 580 4GB and 10.13.5   
    You're welcome
    I'm glad you managed to install Mojave finally
  20. Like
    Loloflat6 got a reaction from Cyberdevs in Possible frame rate issues with AMD Sapphire Pulse RX 580 4GB and 10.13.5   
    Thanks so much Cyberdevs !
    After many weeks to try without success to boot MacOs Mojave without WhateverGreen , I was finally be able to avoid black screen with iMac Pro 1,1 system definition 
    Really a nice day !     
  21. Like
    Loloflat6 reacted to Cyberdevs in Possible frame rate issues with AMD Sapphire Pulse RX 580 4GB and 10.13.5   
    Hi there and welcome to InsanelyMac.com
    Remember that we don't support any of tonymac's tools and guides, you can read the forum's Rules to see why.
    I have an AMD RX580 8GB which is ALMOST similar to your GPU.
    I use it with a dual display setup on my SkyLake rig and the performance is the way it should be, although with 10.13.4 changes to support the eGPUs I encountered some issued regarding the black screen but here's how I fixed it on my rig:
    1. I set the RX580 as the primary GPU
    2. CSM is disabled in BIOS
    3. I enabled the iGPU as the secondary GPU to enable Hardware Encoding Support
    4. I set the following flags under the "Graphics" Section in the config.plist
        1. InjectATI=True
        2. InjectIntel=True
        3. Added the ig-platform-id according to my iGPU
    5. I don't use WhateverGreen because it's not needed anymore so you can remove it from the Kext folder
    6. Added the following patch to avoid the Black Screen issue since I use the iMac17,1 SMBIOS (you might not even need it)
          Name: com.apple.driver.AppleGraphicsDevicePolicy
          Find: ba05000000
          Replace: ba00000000
          Comment: Prevent AGDP from loading
    Remember that your GPU is listed in Apple's site as a compatible model so you might not need to use the InjectATI=True.
    About the framebuffer the most compatible framebuffer for RX580 is the Orinoco framebuffer which might also not be necessary in your case.
    RadeonDeInit=True is not necessary for macOS High Sierra 10.13.4 and newer.
    You can also send me your EFI folder for further analysis, you can remove Serial Number, MLB, UUID, Apple and theme folder and any other private data that you have.
    If the problem persist you can always make a clean install without using any third party tools to have a 100% vanilla installation and then we can troubleshoot the issue one step at the time.
    Here's a detailed guide on how to install macOS High Sierra on your rig and you can find a lot of great tips and tricks.
    Just run this app and post the results here and I'll take a look.
  22. Like
    Loloflat6 reacted to Cyberdevs in [pre-release] macOS Mojave   
    I did another clean install and added the "AirPortAtheros40.kext to /S/L/E and now it's working I guess my previous installation was messed up.
  23. Like
    Loloflat6 reacted to KGP-iMacPro in How to build your own iMac Pro [Successful Build/Extended Guide]   
    SSDT-9.aml, apparently the one and only key for a complete and successful TB Hackintosh implementation...

    In order to demonstrate that I am not yet totally insane with my guesses and ideas, let's demonstrate below that SSDT-9.aml seems to be one of possible cornerstone for reaching full Hackintosh functionality on a iMac Pro Hackintosh system.

    However, due to the missing method "_ini" implementation (port and device initialisation/configuration) in SSDT-9.aml and likely also due to other missing Apple iMac Pro SSDT/DSDT ACPI implementations, my modified SSDT-9.aml yet fails in implementing the basic system essentials for a complete TB Hackintosh configuration and results in plenty of ACPI errors, Name Space Lookup failures and variable or argument errors during boot..



    Nevertheless, few essential things are added when inspecting IOREG or Apple's system report..

    While from the TB-kexts used on a real iMacPro only com.apple.driver.AppleThunderboltNHI.kext is active on our Hackintosh systems, SSDT-9.aml so far also loads at least com.apple.iokit.IOThunderboltFamily.kext.


    However, com.apple.driver.AppleThunderboltDPAdapterFamily, com.apple.driver.AppleThunderboltIP.kext, com.apple.driver.AppleThunderboltDPInAdapter, com.apple.driver.AppleThunderboltPCIDownAdapter remain without function due to frequent ACPI errors (Namespace Lookup errors, argument and variable errors, etc.) during boot, which are supposedly due to the yet missing Method "_ini" (port/device implementation/configuration) in my most actual SSDT-9.aml distribution and lacking related ACPI implementations...

    Most essentially, with my current SSDT-9.aml, also the "RTPC true" entry adds under AppleThuderboltNHIType3..

    One might also find the one or other interesting IOREG add-ons under in all other TB PCI device implementations...

    Please find linked here my current AML TB implementations for experts only (!!!), i.e. SSDT9.aml, SSDT-DTPG.aml, SSDT-GNVS.aml, SSDT-GG/SG-Methods.aml, SSDT-OSDW.aml and SSDT-SBUS.aml,  I also link once more @TheOffcialGypsy 's most recent iMac Pro dump, where you find the original SSDT-9.aml (BTW.. SSDT-10.aml might be noteworthy in addition)  besides the iMac Pro DSDT and other iMacPro SSDT implementations... linked as well the IOREG save of the original iMac Pro...

    @TheOfficialGypsy, any more recent dump under 10.13.6 or 10.14 PB4 available?

    I guess, it rapidly might become evident that the complexity of the problem apparently exceeds the capacities and knowledge of one single person... What about active collaborators, here online or maybe also within some small local "insitu" and "hands-on" workgroup in the Berlin/Germany area?
    @apfelnico, @nmano, or who ever is interested and is able to join this endeavour?

    I really don't know if there is any valid chance for a successful SSDT-9.aml Hackintosh TB implementation.. However, we should give it a try.. 

    Enjoy and have fun,
    P.S: SSDT-9.aml of the iMac Pro dump is broken and impossible to be compiled..

    One needs to start with the SSDT-9.dsl and add "\_SB.PC01.BR1A.UPSB.AMPE ()" under:
    Scope (\_GPE) { Method (_L32, 0, NotSerialized) // _Lxx: Level-Triggered GPE { If (LNot (OSDW ())) { If (LEqual (\_SB.PC01.BR1A.POC0, One)) { Return (Zero) } Sleep (0x0190) If (LEqual (\_SB.PC01.BR1A.WTLT (), One)) { \_SB.PC01.BR1A.ICMS () } Else { } If (\_SB.PC01.BR1A.UPMB) { Store (Zero, \_SB.PC01.BR1A.UPMB) Sleep (One) } Else { } \_SB.PC01.BR1A.CMPE () } ElseIf (LEqual (\_SB.GGII (0x01030012), One)) { \_SB.SGII (0x01030012, Zero) } Else { \_SB.SGII (0x01030012, One) } \_SB.PC01.BR1A.UPSB.AMPE () } } It took me weeks and months to discover and fix these stupid errors..
    For the sake of completeness and for simplicity, I also attach a minimal SSDT-9 hot plug injector AML, i.e. SSDT-9-minimal-hotplug-injector.aml, which pretty does everything for achieving a functional TB and TB XHC USB hot plug workaround on THB-C removed Hackintosh systems..
  24. Like
    Loloflat6 reacted to Poco in Upload Files in Downloads section.   
    This should be fixed now!
  25. Like
    Loloflat6 got a reaction from KGP-iMacPro in iMac Pro X299 - live the future new with macOS 10.14 Mojave [Successful Build/Successful Guide]   
    I have managed intall MacOs Mojave beta dp1 on a HDD HFSJ+ patition : works perfectly
    ( i have installed before MacOs Mojave in another system with Mojave MBR HFS Firmware Check Patch 10.14.db1 , i did a dmg image from the partition an restorered this dmg image on my X299 system  )
    Some restrictions :
    - Sleep / wake issue
    - Whatevergreen.kext is needed
    The great point TB3 with SSDT-X299-TB3-iMacPro-Gigabyte is fully working hot plug with USB_C for my screen.