Jump to content
Welcome to InsanelyMac Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.


  • Content count

  • Joined

  • Last visited

About SP1950

  • Rank
    InsanelyMac Protégé
  1. How about USB support? I got Lion installed, with correct DSDT, but "EHCI controller unable to take control from BIOS" So basically no USB mass-storage support, and the EHCI driver is not loaded correctly (but mice & keyboards work.) Also the RTC seem to be off, the clock slows down by about 30 minutes after a few hours. THe rest are fine, use the old school enablers for gfx, the realtek ethernet driver port. EDIT: Did I say anything about my config? i5-750 stock with Gigabyte P55-US3L. Works perfectly with SL.
  2. SMC Monitor

    You didn't go through the menus in the tool, did you?
  3. SMC Monitor

    THank you so much for such a useful utility! I do have some questions relating to the CPU frequency. I have an i5-750 CPU on 10.6.6 in 64bit. I can see that speedstep is working, but the frequencies are "different" from the actual ones. The are just not the ones from the C/P-state table accessed from the menu. So what exactly does the values in the main window mean? Plus I should have the turbo boost thing for my processor, but from the tables I can't find cant freq higher than the non-turbo max (2.67 GHz)
  4. Mac OS X 10.6 Snow Leopard

    thanks for the tip , but my snow leopard is still not working i tried creating the extensions.mkext in both /s/l/ and /s/l/caches/com.apple.kext.caches/startup, but still no luck for me the ing thing just still creates its own mkext at boot (already skip the -f flag), ignoring what i had made it is the same kp, and i have no clue on the problem at all i guess i should wait for the september release, get an upgrade dvd and try again and is there anyone with an atom netbook got snow leo running?
  5. Mac OS X 10.6 Snow Leopard

    this is the kp i get with -v -f -legacy and cpus=1 for atom what's wrong with my installation? i tried 3 times already on both int and ext hd, and both mbr & gpt partitioning thanks
  6. Mac OS X 10.6 Snow Leopard

    i actually followed this guide since my 1st attempt but all i got now is kp... perhaps atom cannot use vanilla kernel anymore? (just a guess)
  7. Mac OS X 10.6 Snow Leopard

    please post your guide asap! i only get endless kp on my aspire one with atom too... already added dsmos, disabler but no avail. and how did you install onto a ext hd? i could do so for leopard before but this time my partition stays at "owners disabled", so i can't even add kexts properly.
  8. hi i am using an acer aspire one and i cannot find the scope thing either. can you try to patch it for me please? any help will be appreciated! thank you! AspireOne.zip
  9. S-ATA & IOKitWait timeout...

    thanks!!!! you are a lifesaver!!! even though my rig still hangs at applenforceata, it's good see the desktop one minute earlier than usual!!!
  10. ATI SB400 AC97 Repost Request

    hi everyone, i am using the stupid SB400 Audio 1002:4370 and i just could get it work ONCE (literally once because it worked during the boot after the first kext installation ONLY) is there anything i can do to get it work for the second time? i tried every ac97 kexts & even the generic azalia one, but still no luck. any kind of help would be appreciated. thanks:) quick spec: ati sb400 mb 1002:4370 audio using 10.5.5
  11. Private alpha test of Voodoo 9.5 Kernel

    ---------- CPUID START ---------- CPUID: Basic Leaves: CPUID: 00000000: eax = 00000001, ebx = 68747541, ecx = 444d4163, edx = 69746e65 CPUID: 00000001: eax = 00060fb1, ebx = 01020800, ecx = 00002001, edx = 178bfbff CPUID: 00000002: eax = 00000000, ebx = 00000000, ecx = 00000000, edx = 00000000 CPUID: 00000003: eax = 00000000, ebx = 00000000, ecx = 00000000, edx = 00000000 CPUID: 00000004: eax = 00000000, ebx = 00000000, ecx = 00000000, edx = 00000000 CPUID: Extended leaves: CPUID: 80000000: eax = 80000018, ebx = 68747541, ecx = 444d4163, edx = 69746e65 CPUID: 80000001: eax = 00060fb1, ebx = 000008cb, ecx = 0000011f, edx = ebd3fbff CPUID: 80000002: eax = 20444d41, ebx = 6c687441, ecx = 74286e6f, edx = 3620296d CPUID: 80000003: eax = 32582034, ebx = 61754420, ecx = 6f43206c, edx = 50206572 CPUID: 80000004: eax = 65636f72, ebx = 726f7373, ecx = 30363320, edx = 00002b30 CPUID: MSR : 0xa0b020b ----------- CPUID END ----------- FSB:250MHz CPU Freq: 2375MHz Running a13 9.5.0 kernel on nforce chipset audio stutters and clock drifts a new beta would be appreciated! thanks!
  12. NVIDIA ALC883?

    Hi everyone, I am using the onboard HDA as the sound card. The id is 03f010de. It should be an ALC883 produced by NVIDIA. I once got the sound working (in the last installation), but when I reinstalled the Leopard few days ago, I just can't get the audio working. I used the 883 kexts from wiki.taruga.net, but no hope. I had even delete all other PCI IDs except mine from the plists in the ALCinject.kext & the plugins in AppleHDA.kext, but the thing is still not working. I can see both kexts are loaded in startup, but the ALCInject had something like {data not shown}. Is this the reason why I can't get it working? Any kind of help will be appreciated. Thanks.
  13. NForce SATA Controller

    Hi MeDevil, thanks for your test release! my sata dvd can read the dvd&cds now... dvdrw can be erased, but i cannot burn any cd/dvd... my spec: amd 64 x2 3600+ (2.42GHz) 2G DDR2 nForce 405 HD: seagate 10gb ide (leopard) wd 500gb sata (windows & files) DVD: ASUS DRW-1814BLT Zeph's 10.5.2 with all updates 9.2.0 kernel (from dvd) efi mbr thanks!
  14. i have the same drive, almost the same chipset (nforce 405) and same problem!!! but i am using zeph's 10.5.2. please help us! i saw my dvd drive (disk2) in disk util, but it cannot be unmounted (yeah, it shows unmount on the button) thanks:)
  15. thanks for your guide first! i got the leo installed, but my comp reboots after running the above cmd... how can i fix it? thanks