Jump to content

fluxus123

Members
  • Content Count

    52
  • Joined

  • Last visited


Reputation Activity

  1. Like
    fluxus123 reacted to TheRacerMaster in Kernel panic DMOS fakeSMC related?   
    0x14 = 20.
  2. Like
    fluxus123 reacted to TheRacerMaster in Kernel panic DMOS fakeSMC related?   
    It has nothing to do with that, DSMOS.kext is probably failing to read OSK0/OSK1 (through AppleSMC) due to FakeSMC not working properly.
  3. Like
    fluxus123 reacted to MaLd0n in Kernel panic DMOS fakeSMC related?   
    for me the best is...
    http://www.hwsensors.com/releases
    i never have a problem 
  4. Like
    fluxus123 got a reaction from MaLd0n in Atheros AR3980 supposed to work OOB?   
    took it out, put it in the dishwasher at eco cycle then baked dry @ 180C. back in and now fully recognised as Airport Extreme. 
     
    JK obvs: missed a slot right next to my gfx card. who would have thought that last slot would work after the first 4 didn't do the trick? 
     
    Now latched on to PEGP@3 under GFX0... AML stuff sure is strange.
     
    Thanks a million for your help and suggestions guys!
  5. Like
    fluxus123 reacted to Hervé in Atheros AR3980 supposed to work OOB?   
    Hmm, had a quick look at that Clover config file... There sure is a lot of ACPI patches, including one for Airport. Do you need that? Also, you appear to have configured Clover to boot without cache. I'd start by giving a serious look to those deleted ACPI patches.
  6. Like
    fluxus123 reacted to MaLd0n in Atheros AR3980 supposed to work OOB?   
    try in other pciE slot
     
    load optmized defaults in bios
  7. Like
    fluxus123 reacted to MaLd0n in Atheros AR3980 supposed to work OOB?   
    remove connection in systempreferences
    go to library/preferences/systemconfiguration and delete files about airport, network
    run it
    Olarila.command.zip
    reboot
    create new wifi conection

    try it
  8. Like
    fluxus123 reacted to Hervé in Atheros AR3980 supposed to work OOB?   
    'not sure why you've posted twice the same thread. User error I guess...
     
    AR9380-based wireless cards normally work OOB indeed.
    http://forum.osxlatitude.com/index.php?/topic/2120-inventory-of-supported-and-unsupported-wireless-cards/
     
    The kexts may not load for several reasons:
    1) hardware disabled in BIOS
    2) unwanted/incorrect kext patch
    3) clashing multiple copies of the kext
    4) erroneous entry in boot loader config
     
    I cannot see anything wrong in the DSDT that would block the card from working. You could try to rename device H000 to ARPT, but it should not make any difference.
     
    Maybe you can post a zipped copy of your Clover EFI folder that contains config.plist + injected kexts...
  9. Like
    fluxus123 reacted to MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    read the topic
    https://pikeralpha.wordpress.com/2016/07/26/xcpm-for-unsupported-processor/
    many replys about that
  10. Like
    fluxus123 got a reaction from MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    I sent Pike a PM with a link to this thread, but no reply yet. I think he is busy... 
     
    I think something odd is going on though, because of the message in the debug.log 
     
    16:873  0:003  === [ FixBiosDsdt ] =======================================
    17:015  0:142  VideoCard devID=0x118010DE 17:019  0:003  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0x0 17:022  0:003  USBADR[0] = 0x140000 and PCIe = 0xFFFE 17:054  0:031  Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1) 17:058  0:003  USBADR[1] = 0x1C0004 and PCIe = 0x0 17:061  0:003  VideoCard devID=0x20001A03 17:065  0:003  DisplayADR1[1] = 0x1C0007, DisplayADR2[1] = 0x0 17:071  0:006  first CPU found at 2B88 offset 2B8C 17:075  0:003  device candidate at 2AF4 17:078  0:003  device inserted in acpi_cpu_score SCK0 17:082  0:003  score candidate at 293B 17:085  0:003  score inserted in acpi_cpu_score _SB_SCK0 17:089  0:003  Found ACPI CPU: CP00 | CP01 | CP02 | CP03 | CP04 | CP05 | CP06 | CP07 | CP08 | CP09 | CP0A | CP0B | CP0C | CP0D | CP0E | CP0F | CP10 | CP11 | CP12 | CP13 | CP14 | CP15 | CP16 | CP17 | CP18 | CP19 | CP1A | CP1B | CP1C | CP1D | CP1E | CP1F , within the score: _SB_SCK0 17:206  0:117  Found PCIROOTUID = 0  
    17:341  0:131  === [ DropSSDT ] ==========================================
    17:492  0:151  Drop tables from Xsdt, SIGN=SSDT TableID= Length=0 17:495  0:003   Xsdt has tables count=21 17:499  0:003   Table: SSDT  PmMgt  94039 dropped 17:502  0:003   Table: SSDT  SSDT HWP  166500 dropped 17:506  0:003   Table: SSDT  SpsNm     9810 dropped 17:512  0:006   Table: SSDT  SpsNvs    100 dropped 17:516  0:003  corrected XSDT length=172 17:519  0:003  Out of control with CPU numbers 17:523  0:003  CPUBase=0 and ApicCPUBase=0 ApicCPUNum=24 17:526  0:003  Maximum control=0x14 17:530  0:003  Turbo control=0x1A 17:533  0:003  P-States: min 0xC, max 0x1A     In IORegistry only CPU cores from CP00 up to CP17 inside _SCK0 are registered and the same for CP00 - CP17 inside _SCK1, which totals a correct amount of 48 logical cores. I don't understand why the debug only shows 31 cores, all inside _SCK0 of which CP18 - CP1F aren't even in the registry. ...So odd.
  11. Like
    fluxus123 got a reaction from MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    no, it generated 1 SSDT only, but contains methods etc for both Sockets and all cores/threads.
     
    Have a look
    SSDT.aml.zip
  12. Like
    fluxus123 reacted to MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    try speak to pike about that
    only one processor work with PM
     
    the pike script generate 2 ssdts? 
  13. Like
    fluxus123 got a reaction from MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    Yes, that's what I had before in my patched folder, just the edited DSDT and Pikes SSDT which is what gave me the score of 2600/21500
     
    The extract folder only has that many SSDT now because in POST 41 you said to remove the Drop OEM and then run patchmatic. 
  14. Like
    fluxus123 reacted to MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    where the pike ssdt?
    u try HWP option for use native hwp?
    try with HWPEnable in clover and dont use pike ssdt
    try with
  15. Like
    fluxus123 got a reaction from MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    extract folder attached. Looks like there is a 4th SSDT running (SSDT-1) with ID "SSDT HWP" instead of the 3 that I originally extracted from Linux (PmMgt, SpsNm, SpsNvs). Makes me wonder if I forgot this one in dynamic SSDT folder? 
    extract.zip
  16. Like
    fluxus123 reacted to MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    see 
    config.plist.zip
  17. Like
    fluxus123 got a reaction from MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    Yea I know I have seen someones geekbench score with the same board and 2x E5-2680 v3. His was around 56K, so mine should be at least around 45-50K?
     
    I have put NullCPU kext back into clover folder and removed the SSDT from patched folder. 
     
    now kextstat tells me that NullCPU kext is loaded, but AppleIntelCPU kext is also loaded alongside? Is that correct? I thought XCPM moves PM from AppleIntelCPUPM kext to the kernel? So this kext shouldn't be loading at all?
     
    AppleIntelInfo now tells me 
     
    AICPUPMI: logMSRs............................: 0
    AICPUPMI: logIGPU............................: 0
    AICPUPMI: logIntelRegs.......................: 1
    AICPUPMI: logCStates.........................: 1
    AICPUPMI: logIPGStyle........................: 1
    AICPUPMI: InitialTSC.........................: 0x10fab31e863c
    AICPUPMI: MWAIT C-States.....................: 8480
    PCH device.................: 0x8D448086
    AICPUPMI: CPU Low Frequency Mode.............: 1200 MHz
    AICPUPMI: CPU Maximum non-Turbo Frequency....: 2000 MHz
    AICPUPMI: CPU Maximum Turbo Frequency........: 2600 MHz
     
    ....geekbench running to test states...
     
    AICPUPMI: CPU P-States [ 12 13 14 15 18 19 (20) ]
    AICPUPMI: CPU P-States [ 12 13 14 15 17 18 19 (20) ]
     
    This now shows 2x P-States. Is that a P-state per cpu? Meaning that before only 1 CPU was running and hence the low score?
     
     
    Also, when using NullCPU kext do I still need to tell clover to generate P-states and C-states?
     
    Looking at HWMonitor screenshot above it looks like not all cores are running? 
     
    Now Geekbench score is 1800/15000, so slightly better than what it was before (1300/14000), but certainly can't be all cores running.
     
    Also, looking at the P states it looks like it's not going above base rate into turbo states (up to x26)???
     
    Thought I should attach my boot.log if that sheds any light at all?
     
    Also, cpus in IOReg look a bit of a mess?
     
     
    A QUICK UPDATE: removed -xcpm boot flag as apparently only needed for ivy bridge. Haswell does this by default. Also removed KernelPM from KernelAndKextPatches as it's not needed. Boots fine without both arguments. 
     
    I am still bass fled by why AppleIntelCPUPM keeps loading if it's stopped being used inSandy Bridge? This is Haswell with Kernel PM support by default?
    bootlog.log.txt
    IOReg.zip
  18. Like
    fluxus123 reacted to MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    try test with nullcpupm
    remove ssdt and put kext in clover folder, reboot and test
    NullCPUPowerManagement.kext.zip
     
    my i7 5820k lga2011v3 = 26k in geekbench
     
    6 core HT
     
    ur processor i think 60 k 
  19. Like
    fluxus123 got a reaction from MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    Ok, managed to get an output from AppleIntelInfo.kext by using dmesg command after loading the kext instead of retrieving the .dat file.
     
    output confirms that it's not a bug in HWMonitor.
     
    AICPUPMI: v1.1 Copyright \M-B\M-) 2012-2014 Pike R. Alpha. All rights reserved
    AICPUPMI: logMSRs............................: 0
    AICPUPMI: logIGPU............................: 0
    AICPUPMI: logIntelRegs.......................: 1
    AICPUPMI: logCStates.........................: 1
    AICPUPMI: logIPGStyle........................: 1
    AICPUPMI: InitialTSC.........................: 0xa2c29040624
    AICPUPMI: MWAIT C-States.....................: 8480
    PCH device.................: 0x8D448086
    AICPUPMI: CPU Low Frequency Mode.............: 1200 MHz
    AICPUPMI: CPU Maximum non-Turbo Frequency....: 2000 MHz
    AICPUPMI: CPU Maximum Turbo Frequency........: 2600 MHz
    AICPUPMI: CPU P-States [ (20) ]
  20. Like
    fluxus123 got a reaction from MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    Ok, so it's not all going as well as I hoped...
     
    1. Still doesn't wake from hibernation.
     
    2. HWMonitor still only showing 20X multiplier, showing super high temps for ambient and CPU heatsink (these cannot be right at all, they're around 45-50C) and fans are still running at full blast
     
    3. geekbench score dropped from 2200/17500 (no PM) to 1300/14000 with current power management ssdt 
     
    Is there a way to bring up P-states and Turbo states in Termianal, as currently used by the system?
     
     

  21. Like
    fluxus123 reacted to MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    very good, bro. 
     
    post geekbench result with a monster processor! 48 lol
  22. Like
    fluxus123 got a reaction from MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    I DID IT!
     
    ran the ssdtPRGen manually with the following command:
     
    ~/ssdtPRGen.sh -cpus 2 -l 48 -target 2 -t 105 -x 1 -d 3 -p E5-2658 -m MacPro6,1 -f 2000 -turbo 2700 -bclk 100 -b Mac-F60DEB81FF30ACF6
     
    The output of that is the following
     
     
    ssdtPRGen.sh v0.9  Copyright © 2011-2012 by † RevoGirl
                 v6.6  Copyright © 2013 by † Jeroen
                 v21.4 Copyright © 2013-2017 by Pike R. Alpha
    -----------------------------------------------------------
    Bugs > https://github.com/Piker-Alpha/ssdtPRGen.sh/issues <
     
    System information: Mac OS X 10.12 (16A323)
    Brandstring: "Genuine Intel® CPU @ 2.00GHz"
     
    Override value: (-cpus) number of processors, now using: 2!
    Override value: (-l) number of logical processors, now using: 48!
    Override value: (-target) CPU, now using: Haswell!
    Override value: (-t) maximum TDP, now using: 105 Watt!
    Override value: (-x) XCPM mode, now set to: 1!
    Override value: (-d) debug mode, now using: 3!
    Override value: (-p) processor model, now using: E5-2658!
    Override value: (-m) model, now using: MacPro6,1!
    Override value: (-f) clock frequency, now using: 2000 MHz!
    Override value: (-turbo) maximum (turbo) frequency, now using: 2700 MHz!
    Override value: (-bclk) frequency, now using: 100 MHz!
    Override value: (-B ) board-id, now using: Mac-F60DEB81FF30ACF6!
     
    Setting executing bit of extractACPITables ...
    _checkForExecutableFile(extractACPITables) Done.
    Extracting ACPI tables ... Done.
    matchingFilename: /Users/philippvonfrankenberg/Library/ssdtPRGen/ACPI/SSDT-1.aml
    matchingFilename: /Users/philippvonfrankenberg/Library/ssdtPRGen/ACPI/SSDT-2.aml
    matchingFilename: /Users/philippvonfrankenberg/Library/ssdtPRGen/ACPI/SSDT-3.aml
    matchingFilename: /Users/philippvonfrankenberg/Library/ssdtPRGen/ACPI/SSDT-4.aml
    matchingFilename: /Users/philippvonfrankenberg/Library/ssdtPRGen/ACPI/SSDT-5.aml
    matchingFilename: /Users/philippvonfrankenberg/Library/ssdtPRGen/ACPI/SSDT-6.aml
    Checking User Defined processor data ...
    Checking Sandy Bridge processor data ...
    Processor data found for the Intel E5-2658
    Version: models.cfg v150 / Sandy Bridge.cfg v150
     
    _getACPIProcessorScope: /tmp/SSDT-1.dat
    _getACPIProcessorScope: /tmp/SSDT-2.dat
    _getACPIProcessorScope: /tmp/SSDT-3.dat
    _getACPIProcessorScope: /tmp/SSDT-4.dat
    _getACPIProcessorScope: /tmp/SSDT-5.dat
    _getACPIProcessorScope: /tmp/SSDT-6.dat
    4 Name (_HID, "ACPI0004") object(s) found in DSDT
    matchingData:
    5b828c000253434b30085f4849440d414350493030303400
    5b828e000253434b31085f4849440d414350493030303400
    5b828f0c0253434b32085f4849440d414350493030303400
    5b828f0c0253434b33085f4849440d414350493030303400
    Searching for ACPI Processor declarations in Device(SCK0) {}
    Three-byte encoding detected (maximum length 0x0FFFFF/1048575)
    pkgLengthByte: 0x8c/140
    packageLength: 0x0200c/8204
    scopeLength: 8204
    Device (SCK0): 
    processorID: 00 CP00
    processorID: 02 CP01
    processorID: 04 CP02
    processorID: 06 CP03
    processorID: 08 CP04
    processorID: 0a CP05
    processorID: 10 CP06
    processorID: 12 CP07
    processorID: 14 CP08
    processorID: 16 CP09
    processorID: 18 CP0A
    processorID: 1a CP0B
    processorID: 01 CP0C
    processorID: 03 CP0D
    processorID: 05 CP0E
    processorID: 07 CP0F
    processorID: 09 CP10
    processorID: 0b CP11
    processorID: 11 CP12
    processorID: 13 CP13
    processorID: 15 CP14
    processorID: 17 CP15
    processorID: 19 CP16
    processorID: 1b CP17
     
    gScope              : 1
    gProcessorStartIndex: 24
    gLogicalCPUs        : 48
    gProcessorNames     : 24
    Searching for 0 additional Processor declaration ...
    Searching for ACPI Processor declarations in Device(SCK1) {}
    Three-byte encoding detected (maximum length 0x0FFFFF/1048575)
    pkgLengthByte: 0x8e/142
    packageLength: 0x0200e/8206
    scopeLength: 8206
    Device (SCK1): 
    processorID: 20 CP00
    processorID: 22 CP01
    processorID: 24 CP02
    processorID: 26 CP03
    processorID: 28 CP04
    processorID: 2a CP05
    processorID: 30 CP06
    processorID: 32 CP07
    processorID: 34 CP08
    processorID: 36 CP09
    processorID: 38 CP0A
    processorID: 3a CP0B
    processorID: 21 CP0C
    processorID: 23 CP0D
    processorID: 25 CP0E
    processorID: 27 CP0F
    processorID: 29 CP10
    processorID: 2b CP11
    processorID: 31 CP12
    processorID: 33 CP13
    processorID: 35 CP14
    processorID: 37 CP15
    processorID: 39 CP16
    processorID: 3b CP17
     
    Number of Scopes: 2
    Generating ssdt.dsl for a 'MacPro6,1' with board-id [Mac-F60DEB81FF30ACF6]
    Haswell Core E5-2658 processor [0x306F1] setup [0x0507]
    With a maximum TDP of '105' Watt, as specified by argument: -t 105
    Number logical CPU's: 48 (Core Frequency: 2000 MHz)
    Number of Turbo States: 7 (2100-2700 MHz)
    Number of P-States: 16 (1200-2700 MHz)
     
     
    Warning: You must use the -xcpm_ipi flag instead of -xcpm on multiprocessor systems.
     
     
     
    targetCStates: 13
    Adding C1
    Adding C3
    Adding C6
    targetCStates: 13
    Adding C1
    Adding C3
    Adding C6
    targetCStates: 13
    Adding C1
    Adding C3
    Adding C6
    targetCStates: 13
    Adding C1
    Adding C3
    Adding C6
    Injected C-States for CP00 (C1,C3,C6)
    Injected C-States for CP01 (C1,C3,C6)
    Warning..: FrequencyVectors missing in Mac-F60DEB81FF30ACF6.plist
    Download https://github.com/Piker-Alpha/freqVectorsEdit.shto fix this
    Warning: 'system-type' may be set improperly (1 instead of 3)
    - Clover users should read https://clover-wiki.zetam.org/Configuration/ACPI#acpi_smartups
    Compiling: ssdt_pr.dsl
    Intel ACPI Component Architecture
    ASL+ Optimizing Compiler version 20160422-64(RM)
    Copyright © 2000 - 2016 Intel Corporation
     
    ASL Input:     /Users/philippvonfrankenberg/Library/ssdtPRGen/ssdt.dsl - 952 lines, 27848 bytes, 317 keywords
    AML Output:    /Users/philippvonfrankenberg/Library/ssdtPRGen/ssdt.aml - 7958 bytes, 150 named objects, 167 executable opcodes
     
    Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations
     
    Do you want to open ssdt.dsl (y/n)? n
     
    The generated SSDT gives me a KP about P-limits so I started trying to address the Warnings
    WARNING #1 You must use the -xcpm_ipi flag instead of -xcpm on multiprocessor systems. 
     
    ->when I try use the -xcpm_ipi flag instead it tell me that it's an unknown flag?? so just ignored this one
     
    WARNING #2 FrequencyVectors missing in Mac-F60DEB81FF30ACF6.plist
    Download https://github.com/Piker-Alpha/freqVectorsEdit.shto fix this  
     
    -> downloaded freqVectorsEdit.sh, ran it, but when it's checking for MacPro6,1 board-id resource file, it's not listed because the plist didn't contain the frequency vector at all. see below
     
    bash-3.2# ~/freqVectorsEdit.sh 
     
    freqVectorsEdit.sh v2.3 Copyright © 2013-2017 by Pike R. Alpha.
    -----------------------------------------------------------------
    Bugs > https://github.com/Piker-Alpha/freqVectorsEdit.sh/issues <
     
    Available resource files (plists) with FrequencyVectors:
     
     [  1 ] Mac-031B6874CF7F642A.plist (iMac14,1)
     [  2 ] Mac-06F11F11946D27C5.plist ()
     [  3 ] Mac-06F11FD93F0323C5.plist ()
     [  4 ] Mac-189A3D4F975D5FFC.plist (MacBookPro11,1)
     [  5 ] Mac-27ADBB7B4CEE8E61.plist (iMac14,2)
     [  6 ] Mac-2BD1B31983FE1663.plist (MacBookPro11,3)
     [  7 ] Mac-35C1E88140C3E6CF.plist (MacBookAir6,1)
     [  8 ] Mac-35C5E08120C7EEAF.plist (Macmini7,1)
     [  9 ] Mac-3CBD00234E554E41.plist (MacBookPro11,2)
     [ 10 ] Mac-42FD25EABCABB274.plist (iMac15,1)
     [ 11 ] Mac-50619A408DB004DA.plist ()
     [ 12 ] Mac-65CE76090165799A.plist ()
     [ 13 ] Mac-77EB7D7DAF985301.plist (iMac14,3)
     [ 14 ] Mac-7DF21CB3ED6977E5.plist (MacBookAir6,2)
     [ 15 ] Mac-81E3E92DD6088272.plist ()
     [ 16 ] Mac-937CB26E2E02BB01.plist ()
     [ 17 ] Mac-9AE82516C7C6B903.plist ()
     [ 18 ] Mac-9F18E312C5C2BF0B.plist ()
     [ 19 ] Mac-A369DDC4E67F1C45.plist ()
     [ 20 ] Mac-B809C3757DA9BB8D.plist ()
     [ 21 ] Mac-BE0E8AC46FE800CC.plist ()
     [ 22 ] Mac-DB15BD556843C820.plist ()
     [ 23 ] Mac-E43C1C25D4880AD6.plist ()
     [ 24 ] Mac-F305150B0C7DEEEF.plist ()
     [ 25 ] Mac-FA842E06C61E91C5.plist (iMac15,1)
     [ 26 ] Mac-FFE5EF870D7BA81A.plist ()
     
    Please choose the desired plist for your hardware (Exit/1-26) ?
     
     
    Solution was to manually add 
     
    <key>InitialPLimit</key>
    <integer>0</integer> <key>FrequencyVectors</key> <array> <data></data>   and then reload the shell   bash-3.2# /Users/philippvonfrankenberg/freqVectorsEdit.sh   
    freqVectorsEdit.sh v2.3 Copyright © 2013-2017 by Pike R. Alpha.
    -----------------------------------------------------------------
    Bugs > https://github.com/Piker-Alpha/freqVectorsEdit.sh/issues <
     
    Available resource files (plists) with FrequencyVectors:
     
     [  1 ] Mac-031B6874CF7F642A.plist (iMac14,1)
     [  2 ] Mac-06F11F11946D27C5.plist ()
     [  3 ] Mac-06F11FD93F0323C5.plist ()
     [  4 ] Mac-189A3D4F975D5FFC.plist (MacBookPro11,1)
     [  5 ] Mac-27ADBB7B4CEE8E61.plist (iMac14,2)
     [  6 ] Mac-2BD1B31983FE1663.plist (MacBookPro11,3)
     [  7 ] Mac-35C1E88140C3E6CF.plist (MacBookAir6,1)
     [  8 ] Mac-35C5E08120C7EEAF.plist (Macmini7,1)
     [  9 ] Mac-3CBD00234E554E41.plist (MacBookPro11,2)
     [ 10 ] Mac-42FD25EABCABB274.plist (iMac15,1)
     [ 11 ] Mac-50619A408DB004DA.plist ()
     [ 12 ] Mac-65CE76090165799A.plist ()
     [ 13 ] Mac-77EB7D7DAF985301.plist (iMac14,3)
     [ 14 ] Mac-7DF21CB3ED6977E5.plist (MacBookAir6,2)
     [ 15 ] Mac-81E3E92DD6088272.plist ()
     [ 16 ] Mac-937CB26E2E02BB01.plist ()
     [ 17 ] Mac-9AE82516C7C6B903.plist ()
     [ 18 ] Mac-9F18E312C5C2BF0B.plist ()
     [ 19 ] Mac-A369DDC4E67F1C45.plist ()
     [ 20 ] Mac-B809C3757DA9BB8D.plist ()
     [ 21 ] Mac-BE0E8AC46FE800CC.plist ()
     [ 22 ] Mac-DB15BD556843C820.plist ()
     [ 23 ] Mac-E43C1C25D4880AD6.plist ()
     [ 24 ] Mac-F305150B0C7DEEEF.plist ()
     [ 25 ] Mac-F60DEB81FF30ACF6.plist (MacPro6,1)
     [ 26 ] Mac-FA842E06C61E91C5.plist (iMac15,1)
     [ 27 ] Mac-FFE5EF870D7BA81A.plist ()
     
    Please choose the desired plist for your hardware (Exit/1-27) ?
     
    TADA it's listing it now. upon proceeding with 25 it ends up NOT adding any data to frequency vectors but instead removing the StepContextDict dictionary. 
     
    WARNING #3 'system-type' may be set improperly (1 instead of 3)
    - Clover users should read https://clover-wiki.zetam.org/Configuration/ACPI#acpi_smartups 
     
    -> it mentions ACPI_SmartUPS, so I enabled that. 
     
    Then ran ssdtPRGen again with the same flags, only had the xclm warning, which I couldn't do anything about.
     
    After restart I don't get a KP anymore and I can see X86.... hooking on to all the logical processors  
     
    and low and behold I now have 
     
      112    1 0xffffff7f82ba1000 0x17000    0x17000    com.apple.driver.X86PlatformPlugin (1.0.0) 314B16BB-0DF9-3FF0-9416-961E762C882A <82 74 39 37 11 7 6 5 4 3 1>
      119    1 0xffffff7f82bd6000 0x7000     0x7000     com.apple.driver.X86PlatformShim (1.0.0) 49CF8C0A-C2D1-356C-8127-805E4B2433D1 <112 82 74 7 4 3>
     
     
    So I guess it's all working now. Will test sleep and hibernate properly in a bit.
     
    Thanks a lot for all your help MALDON!!
  23. Like
    fluxus123 got a reaction from MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    I just tried without dropping ssdt tables. same errors 
  24. Like
    fluxus123 reacted to MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    als0 removed, imac and macbook use it, not ur macpro 
    AppleSMCLMU.kext/Contents/PlugIns/AmbientLightSensorHID.plugin add alc 1150 in hdef with id 1
     
    usb only cosmetic for pci devices and device id
     
    shutdown, not a simple shutdown, solve many problems after sleep
     
    lpc is fine, i apply dsm into device and load now
     
    IRQs, avoid many things, sata, usb and many others conflicts.

    if u dont have native pm, use nullcpupowermanagement
  25. Like
    fluxus123 got a reaction from MaLd0n in ASUS Z10PE-D8 WS DSDT disassemble and recompile   
    IOReg after reboot with your edited DSDT is attached to post #23 -> MacPro6,1.zip ....sorry should have probably named it IOReg.zip 
     
    I saw that I have the chipset and other bits showing under pci now. Thanks! Up to that point I only managed to patch DSDT to get my NVIDIA graphics display controller and some other mass storage controllers showing under pci.
     
    USB? not sure what you edited/patched, but doesn't seem to have changed anything in profiler and or port configuration in IOReg?
    Shutdown? I never had any shutdown issues?
    LPC? is that the ALS0 device that is now used to fake a device with the right ID for AppleLPC to latch on?
    IRQ? Is that what fixed the pci list to show C612 chipset?
     
     
    I have ALC1150 codec... 
     
    config attached.
     
    Thanks!
    config.plist.zip
×