Jump to content

jimmydigital00

Members
  • Content Count

    96
  • Joined

  • Last visited

About jimmydigital00

  • Rank
    InsanelyMac Protégé
  1. I have the same problem with my 980 but if I just reboot 1 or 2 times the driver will load and everything is fine. The only boot argument I am using is nvda_drv=1
  2. jimmydigital00

    Yosemite 10.10 saying contact is not registered with Imessage

    Same problem here using Clover.
  3. jimmydigital00

    GTX580 with GraphicsEnabler=No

    Ok so a little about my machine. Its a Asus P8Z68-V Pro with 6GB Gskill ddr3 -1866 Ram and a 2600K chip overclocked to 4.0. I am running a corsair Force GT SSD for storage. Everything is running great on mountain lion. Sleep, sound, graphics, restart, speedstep. My question is has anyone ever been able to get Mountain lion to boot a GTX580 video card with the Graphicsenabler flag set to No. Every time I do this both screens go black and go into power save mode. The machine seems to be booted up properly but I cannot see anything. I go back and turn the graphics enabler back on and it works. Any ideas or tips would be greatly appreciated. Thanks I accidentally double posted this question sorry about that. Any help would be greatly appreciated on the above question.
  4. jimmydigital00

    GTX580 with GraphicsEnabler=No

    1
  5. Ok so a little about my machine. Its a Asus P8Z68-V Pro with 6GB Gskill DDR3-1866 Ram and a 2600K chip overclocked to 4.0. I am running a Corsair Force GT SSD for storage. Everything is running great on mountain lion. Sleep, sound, graphics, restart, speedstep. My question is has anyone ever been able to get Mountain lion to boot a GTX580 video card with the Graphicsenabler flag set to No. Every time I do this both screens go black and go into power save mode. The machine seems to be booted up properly but I cannot see anything. I go back and turn the graphics enabler back on and it works. Any ideas or tips would be greatly appreciated. Thanks
  6. Fakesmc, disabler and blockstorage That is all you need to run SL on RIIE Openhaltrestart is needed to restart and shutdown also
  7. jimmydigital00

    BootCDMaker

    This works beautifully on a Rampage II Extreme, Core i7 920 setup. I am stoked that I was able to find this application. You are DA MAN!!!!!!!!!! This is going to save me tons of time in my future endeavors trying to perfect my Snow Leopard installation. Thanks JN
  8. jimmydigital00

    Slow Hard Drive Performance ICH10

    That fixed it!!!!!!!!!!! It can now connect to all SATA drives with full speed using 32 bit kernel. Sound works as well!!!!!!! I owe you one. Thanks again
  9. jimmydigital00

    Slow Hard Drive Performance ICH10

    I put the computer in 64bit mode and the problem goes away. Is everyone that this fix worked for running in 64bit?
  10. jimmydigital00

    Slow Hard Drive Performance ICH10

    I might have jumped the gun on claiming that this is fixed. I have been transferring files between sata drives a lot tonight and am still experiencing similar problems. They are not as bad as before but still exist. For example. I am in SL and I want to grab a file from my Leopard harddrive. When I click on the drive it takes about 30 seconds to load which may be normal, but when I try to go into another folder I get the spinning wheel icon. It will sit there for a while or until I load a safari page. As soon as I start Safari it immediately loads. I am using the DSDT that The King fixed for me and posted above. Is anyone else seeing this? Is there a kext I should be using? I am using FakeSMC2 maybe that is the problem? Jim
  11. jimmydigital00

    Slow Hard Drive Performance ICH10

    The King truly is the king Thank you very much. Jim
  12. jimmydigital00

    Slow Hard Drive Performance ICH10

    Would you mind doing that to my dsdt? I have tried it multiple times but it will not recompile. I have a link to my dsdt above. I would be very appreciative. Thanks Jim
  13. jimmydigital00

    Slow Hard Drive Performance ICH10

    Can i do that with DSDTDE?
  14. jimmydigital00

    Slow Hard Drive Performance ICH10

    The King or CSharpMac or anyone. I have tried for 2 hours now to make these changes to my dsdt.aml file but when I try to recompile I get 2 error messages. Would someone mind making these changes for me and recompiling and sending me a modified dsdt.aml? I would really appreciate it. Here is the link to my dsdt.aml I am using now. It looks like only 2 of the 4 fields need to be changed according to The King. Thanks http://www.mediafire.com/?sharekey=9a454da...04e75f6e8ebb871
  15. jimmydigital00

    Slow Hard Drive Performance ICH10

    I tried this and notice a small improvement but still unusable speed. It still sits still until I load safari or any other app. Once the other app starts up it connects instantly. Xbench Disk test doesnt even finish!!! I hope somebody can figure this out. Until then I will run IDE compatible mode. I also tried booting in 64bit but my system panics. Im not to sure why yet.
×