Jump to content
Welcome to InsanelyMac Forum

Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.


  • Content count

  • Joined

  • Last visited

About meggaz

  • Rank
    InsanelyMac Protégé
  1. Boitier mini itx style mac mini

    Bonjour, Je en comprends pas bien le sens de cette réponse, d'une part ce matériel semble ne plus être d'actualité, ensuite il s'agit d'un boitier pour disque dur donc sans emplacement prévu pour une carte mini itx. En plus la carte mini itx fait 17 cm X 17 cm et les dimensions extérieures du boitier sont de 16,5 cm X 16,5 cm !
  2. You can do it with a dos floppy, it must also work with a bootable memoy card ! Found on asrock site: How upgrade bios »BIOS Update Utility ASRFLASH.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press <F2> to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?) The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage. »Updating BIOS Procedures Create a bootable system floppy disk. Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both ASRFLASH.EXE utility and BIOS file to the disk you created in step 1. Boot from the disk you created in step 2. At the "A:\" prompt, type ASRFLASH, hit space bar once, and type BIOS file name then press <Enter>. For example: A:\ASRFLASH K7S41GX2.00 <Enter> then you will see a message "Please wait for BIOS loading ROM". After 30 seconds, you will see the message "Flash ROM Update Completed - Pass", then you have finished upgrading the BIOS. After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press <F2> to enter the BIOS setup utility during boot up. In Exit menu, please select "Load Default Settings" and press <Enter> to continue. Select "Exit Saving Changes" and press <Enter> to exit the BIOS setup utility. Now, system is booting up with new BIOS. »Notice If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
  3. Works also for me and my Asrock conroe1333
  4. R.I.P Prawker

    It's hard to die, and he was too young. RIP
  5. Security Update 2008-005 is safe

    This update woks on my hackintosh (conroe1333) No problem !
  6. Wi-fi? Dell TrueMobile 1390

    I am happy all is all right, because 1390 is natively supported by leo (broadcom chip)
  7. I am not an "expert" but I think it's a problem with bios, To avoid reboot "enabled bit" must be enabled. You can found how set bios with search on the forum. Good luck. I have install Kaly on my desktop and my laptop (samsung)
  8. Kalyway dual boot Vista Qs

    It works also for me (samsung Q45) 1rst hidden partition = hidden partition for recovery 2nd partition: Vista 3rd partition Leo Kaly After install Kaly, Vista appears in os x bootloader but don't start. 1) Boot with Paragon HD manager boot disk, modify partition os x as inactive, and set vista partition active. 2) reboot with Vista disk to repair Vista boot 3) Wait Vista start OK than reboot with Paragon HD Mger again to set Vista partition inactive and partion OS x active. That's all ! 4) Reboot , you can boot in Vista or in Leo with OS X boot loader. Thanks to all posters.