Jump to content

^_^

Members
  • Content Count

    206
  • Joined

  • Last visited

Everything posted by ^_^

  1. ^_^

    iWork '09 trojan beware!

    Headline says in engadget.com iWork '09 trojan infects at least 20,000 machines. http://www.engadget.com/2009/01/22/iwork-0...hines/#comments Pirated iWork '09 installer may contain trojan horse in macworld.com http://www.macworld.com/article/138380/iworktrojan.html I didn't have iwork09 but as i was reading, i found this and thought someone might need this. sees if you have it at /System/Library/StartupItems for an item named iWorkServices a copy paste of ways to get ride of it from engadget user Aaron
  2. Problem solve, Looks like i have a half working? Faulty wifi card. Change it to AR5BXB92 AR9280 ABGN and shutdown works again. Thanks for the advice guys Especially maleorderbride-san
  3. Update* I realize if i first have the computer to sleep and then shutdown, the cold boot is gone. Power management problem?? reinstall or repatch DSDT?
  4. Ok back.... Let's just say my mobo is not faulty what could be the problem causing the restart loop? Update: if you want my system.log please let me know.
  5. I was going to ask this If or after I get the shutdown problem fixed but looks like support may take a while. I was having problem with checking bad block on a 1T Hard Drive on USB3.0 with TechTool pro 4.6. It will automatically disconnect in the middle of the task. Does it happen to you too? Please let me know. Thanks
  6. Just tried it on Win7, First it was ok, but when i restart a few time, the problem came. Installed EvoReboot but no luck. Contacted gigabyte support. I may have a faulty Mobo?
  7. Tried it, Boot faster but still restart after shutdown. What method did you use to install your osx? What Bios are you currently using? How many memory and HDrive do you have in your mobo at the moment?
  8. Could you please post your dsdt so i can test? Thanks
  9. mine too works in a very very very blue moon. Any solution you've got?
  10. I just bought a MiniPCI to PCIX1 card for an airport extreme card. Everything work so far except i can't shutdown the computer now. It will auto restart after the power LED went out. Tried the settings on Bios start computer with LAN = off. When Card is not installed it works fine... Anyone have any clue? Install: Kakewalk 3.0 OS: 10.6.6 MB: X58A-UD3R 2.0 CPU: i7 950 RAM: 24 GB ADATA 1333 GFX: ELSA 796 GT Silent
  11. Will definately try that, but since i have 0 knowledge of DSDT, Might have to research more of that. My problem was definitely cause by wireless card or converter? This is what I have Mini PCI to PCIx1 Converter Apple Atheros AR5008 AR5BXB72 300M 802.11ABGN wireless card After disconnecting the PCI card, it shutdown perfectly... Any suggestion will be appreciated. Thanks.
  12. Thanks for the reply, Yes i have tried both PCIx1 slot both same result. Will have to read more about dtds... I have 0 knowledge of it Any more suggestion will be appreciated.
  13. Yes! Thank you, I mean it is not a good thing and I am sorry we both had the same problem, Mine too on post 480 From what I know it was cause by me adding a wireless card Posted here. But if you didn't change hardware it might be a chameleon or osx86 problem? OK, this is what i know, 1, Not Bios, I have reset, reflash to FA, FD, Back to FE not fix. I even tried all optimize option. Which render my OSX.6.6 went bad. 2, OSX86, reinstall all new with multibeat ([url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]), and kakewalk. even tried the old by hand all terminal way, no joy. 3,Window7 boot from disk 2 work, shutdown no problem. Which might mean it was cause by osx86? compatibility? Will update more result of my experiment.
  14. Sorry if this doesn't apply, Since there are no motherboard category in this forum and most GA-X58A-UD3R read from here, I tried to post here too. Original tread here. I have fix my shutdown problem, Seems i have a bad install. Now everything works, reboot, sleep, shutdown(kinda) restart bluetooth recognize apple keyboard, compatible card that recognize as airport etc. Just one problem.... I just bought a MiniPCI to PCIX1 card for the airport extreme card. Everything work so far except i can't shutdown the computer now. It will cold boot after the power LED went out for 3 sec.
  15. Update, tried booting into Win7, Same problem, cold boot after 3 sec, Found that this only happen when computer is up for half an hour or so. If it only up for 10 min, it will shut down ok. Hardware prolem? Bios settings problem? (will try optimize settings) Too many Memory? (some tread saying this, will try taking some off?) But when pci slot is not used, it doesn't cold boot. No one has this problem?
  16. I get this message every time i start reboot, good to know did the right thing but after awhile, i kanda wish it'll go away. Any advice on how to?
  17. I don't know if it is still possible to get but i am using this: http://www.elsa-jp.co.jp/products/graphics..._796_gt_silent/ No complaint here.
  18. Delete your extra folder in your harddisk, then enter password. You should be able to copy the new extra folder to it.
  19. Thanks for the grate post and information! Follow your install instruction twice. As long as I can see, all is fine but reboot and shut down. I have tried poking around the CD (DVD) ROM connection and can confirm the CD (DVD) ROM might be the problem for the restart, shutdown fail. Was wondering if you have any suggestion on how might i fix that. Thanks in advance.
  20. Headline says in engadget.com iWork '09 trojan infects at least 20,000 machines. http://www.engadget.com/2009/01/22/iwork-0...hines/#comments Pirated iWork '09 installer may contain trojan horse in macworld.com http://www.macworld.com/article/138380/iworktrojan.html I didn't have iwork09 but as i was reading, i found this and thought someone might need this. sees if you have it at /System/Library/StartupItems for an item named iWorkServices a copy paste of ways to get ride of it from engadget user Aaron
  21. Hi, Thanks for the simple guide. Got problem after step 6) Install GA-P35-DS4 Snow Leopard Installer. Chameleon won't start if i take out the CD (Boot loader on HD won't start) I fellow every step in instruction, Do i need to configure bios back to 32bit for the first boot? I have another SLeo on another drive with different setup, i have switch a new HD to follow this guide. Do i need to make the drive bootable first? any help will be great, thanks. Update* Fix problem by changing HD id, Works on my EP35-DS4 Thanks.
  22. incompatible graphic card? Try adding NVEnabler.kext to kext folder and redo restore to USB.
  23. night_rider is absolutely right, try here for more information. http://www.insanelymac.com/forum/index.php?showtopic=182364 -v or if you are using this guide than interrupt chameleon while boot, select HDD then press down for more option. you need to provide more infor of your mobo, simply saying you have a problem doesn't help us, what is the last error you got? Take a picture if you must. After install, SL will ask you if you want to import you setting when first boot, or use Migration assistant from utilities.
  24. I can't seems to see it anywhere...
  25. no prob >GodOfSharing update: 10.6.1 update success! Str8 from apple software update. re: anyone any idea where is the theme folder for chameleon? The EFI-partition and not in the EFI-partition mode.
×