Jump to content

RX-7-Trainee

Members
  • Content count

    18
  • Joined

  • Last visited

About RX-7-Trainee

  • Rank
    InsanelyMac Protégé
  1. Lenovo 300 Y410 Help with audio and Wifi?

    Here are some links that may help you out: * http://www.insanelymac.com/forum/index.php...mp;#entry642435 * http://www.insanelymac.com/forum/index.php...st&p=928572 * http://www.insanelymac.com/forum/index.php...st&p=937869 Or you can see how your hardware reacts to the VoodooHDA kernel extension: * http://forum.voodooprojects.org/index.php/topic,234.0.html A great kernel extension installer is found here: * http://cheetha.net/ Remember to repair permissions after installing the kernel extensions with Disk Utility. As far as wifi, my guess is you have the Intel 3945 / 4965 card. You can't replace it with something Broadcom-based (which would be what is recognized in Airport) due to a BIOS lock. If you try installing something other than the Lenovo-branded card, you'll get a "miniPCI card is not compatible" error message. Your options are to get a Ralink-based USB Wi-fi adapter (Belkin-branded, usually), or you'll have to wait for a release from Project Camphor. Here's Ralink's drivers for their USB-based adapters - http://www.ralinktech.com/ralink/Home/Support/Macintosh.html Here's Project Camphor - http://projectcamphor.mercurysquad.com/ Hope it goes well!
  2. [GUIDE] Leopard on an XPS 1330/1530

    Hello everyone, You may not remember me, but I'm the guy from post #380 who expressed interest in replacing a 17" 1.33 GHz PowerBook G4 with an XPS 1530. I've had it for about a month, and things are going quite well. I thought I'd share my installation process and some other observations: Hardware: This is the XPS 1530 I went with: * Intel Core 2 Duo T8300 (2.4GHz, 800MHz FSB, 3MB Cache) * 4 GB DDR2 SDRAM @ 667 MHz * 256 MB nVidia GeForce 8600M GT * 250GB 7200rpm SATA HDD * Dell Wireless 1505 Wireless-N Mini Card * Dell Wireless 355 Bluetooth Internal (2.0+Enhanced Data Rate) * 2MP Integrated Webcam Installation: This came with Vista Home Premium 64-bit edition. Since I knew I needed Windows, I had to set up dual booting. Here's how I did it: * Boot to the Leopard Retail DVD using wingrunr21's BOOT-132 DVD. (You'll need a USB mouse since the trackpad doesn't work yet.) If you're new to this, please note: you need a RETAIL Leopard installation disc, not an installation disc for Apple hardware that comes bundled with a Mac. (This can't be emphasized enough.) * Once the Installer displays, go to Disk Utility, partition the drive as GPT, format the first partition as HFS+, and the other as FAT32. * Install Leopard. * Once Leopard installation is complete, install Vista. In Vista's installer, format the FAT32 partition to NTFS. * Once Vista is installed, access the Leopard installation on your hard drive using Winguru's BOOT-132 disc. * Using Apple Software Update, update Leopard to 10.5.7. * Install PC_EFI_v9 first, then install Chameleon 2.0 RC1. * With Chameleon installed, there should now be an "Extra/Extensions" path accessible from the root of your local drive. Copy your extensions here, and set permissions as you would if installing to "System/Library/Extensions" (please research, detailing how is beyond the scope of this document). * Copy Brandon2004 and Chrysaor's DSDT.aml to "/Extra" setting permissions as you would for a kernel extension. * Repair your permissions, and reboot. Your Mac OS X and Leopard partitions should now be selectable from the Chameleon GUI. As mentioned in previous posts, once the special "DSDT.aml" is installed, you don't need "ClamshellDisplay.kext" or the patched audio kexts ("AppleHDA.kext" & "HDAEnabler.kext"). In fact, if those are installed you'll have no audio. Also, despite wingrunr21's advice, I tried "VoodooHDA.kext". It works until you put your laptop to sleep. Then all the audio does is chirp or crack when playing something back. As of this writing, I can confirm "VoodooHDA" is not ready for primetime on the XPS 1530. As far as the internal mic issue, I can't confirm if it works yet. I've plugged in earbuds, shouted into them, and the meters bounce. But I don't have a mini-plug based mic to plug in, and quite honestly won't need one. I have plugged in a USB mic, and that works splendidly (of course). Yes, shutdown/restart still doesn't work. My theory is it's something AppleHDA-related, but that's total conjecture. I can't see anything in Console that would indicate the cause (like a kernel panic). It's interesting though (I'm kind of going into stream-of-consciousness mode, bear with me) that shutdown restart works when you're installing and using BOOT-132 to access the Leopard installation. I don't know... Someone mentioned how it would be nice to shut off Bluetooth at the switch on the right-hand side. Just go into the BIOS and you can set that switch to control on/off functionality for Bluetooth, Wi-fi, Cellular, or some combination thereof. I set it to turn off Bluetooth only since there's no kill switch on the keyboard. I turn off Airport using the menulet next to my battery indicator. I'm using VoodooPS2Controller right now, but I have no control over trackpad configuration. Right now, the touchpad is set to maximum (doesn't take much to get that mouse cursor moving), and I have no control over scrolling functionality as well. When I access the VoodooPS2 preference pane, I get the "ApplePS2Synaptics touchpad not found Error" error. Any suggestions? (It's an ALPS-based trackpad, according to the Windows side.) Also, [F12] no longer works as the Eject key disks with VoodooPS2Controller. And the Eject button will make the optical drive fire only when it's empty. I heard I should try Ukelele, but haven't heard anyone using it yet. Is there an alternate set of PS2-related kexts I should be using? The integrated camera works, but it's defintely 2MP. I haven't tried iChat, but Skype is down to 2 or 3 frames per second on rendering. I tried setting the resolution on the Windows side to see if it would persist in Mac OS X. But I think I'd edit the kernel extension / QuickTime component that's making it run at 1600x1200 whether I like it or not. As of 10.5.7, the Marvell Yukon Ethernet adapter works out of the box. No need for the driver listed in wingrunr21's guide post. All of that being said, I like my choice of hardware, and hope it can last for another 5-6 years like the old faithful PowerBook did. Hopefully this steers you in the right direction if you're thinking of doing something similar. Not to take away from some of the work these different ones have done to make this possible, but I would strongly recommend installing Leopard from a retail DVD. 'Nuff said. Thanks to wingrunr21, Chrysaor, Brandon2004, and Talisman for their attention to this guide and the effort of making it happen on this hardware. If my windy self comes up with any other interesting tidbits, I'll keep you posted.
  3. [GUIDE] Leopard on an XPS 1330/1530

    wingrunr21: A job well done on this guide. I've thought long and hard about what I should get to replace my 17" 1.33 GHz PPC G4 PowerBook, and this guide solidified my decision to buy a XPS 1530 to install my retail Leopard license on. So major props going out to you. And big ups to Brandon2004 and Chrysaor for your work on the DSDT.aml file for some "kext-less" functionality of certain features (if I'm understanding that right). These questions are for you, Brandon2004, and Chrysaor: * Does Time Machine work on the 1530 with 10.5.6? * Do all the web cam apps work (Photo Booth, iChat, Skype, etc.)? * Have you experienced any overheating issues? I'm confident TM should work if it will detect the Ethernet (should having the aforementioned Marvell Yukon chipset mentioned in your guide). The web cam isn't that big a deal, and the overheating is a major concern. I put Leopard on a Lenovo 3000 Y410 notebook, and some of these questions stem from my experience with that. That and the "Hack Pro" I built based on the Tyan Tempest S5396 (http://www.tyan.com/product_board_detail.aspx?pid=562) which has both Ethernet ports available for use, but TM quit working after I updated to 10.5.6. Thanks for your feedback. When the XPS 1530 comes in, I'll keep you posted on my progress. Since I've built 2 (3 if count the failed attempt at a Dell Latitude D820), I probably won't be bothering anyone with needless posts. And if you are moving this guide, keep us posted on where the new home is. Thanks for everything!
  4. 1. Re: Kernel Panic when you shut down after installing Taruga's HDA Patcher: that's normal. As in, "normal-for-a-computer-running-Mac OS X-on-non-Apple-hardware" normal. You've heard others don't experience a KP? Then try the Azalia Audio kext or whatever. Otherwise, expect a KP on shutdown. For all practical purposes, that's no big deal. In order to shutdown your computer, you'll have to a. Hold the power button down for 7 seconds or more. b. Do a restart, and if you've implemented multi-boot, hit the power button before booting to an OS. 2. Re: device showing up, but can't hear sound: open "System Preferences", go to "Sound", and make sure the output device you want (e.g. "Internal Speakers") is selected. If you're using a laptop, try using the volume control quick keys and a little "chirp" sound will occur. If you're using a desktop PC, adjust the volume control "menulet" in the upper-right hand corner with your mouse, and the "chirp" will happen that way too. If that doesn't work, I'd recommend reading all previous posts in this thread. Or go to the Apple HDA thread where Taruga used to post (Taruga, where are you?).
  5. Look at this - http://forum.insanelymac.com/index.php?s=&...st&p=736943 ...and look at this - http://forum.insanelymac.com/index.php?s=&...st&p=737543 Although Taruga's app says it's repaired the permissions, make sure you open Disk Utility and repair disk permissions from there. Also, for this to work (at least on my Lenovo), the laptop had to be put to sleep. Sleep doesn't work, though, and therein lies the trick. For some reason when I put it to sleep, it wakes immediately thereafter and the audio works. However, you need to be running the vanilla kernel in order for this to work. The modified kernel from Team Hackint0sh won't work in that regard. Review and follow the instructions in the URL's above, do some research on how you can run OS X the vanilla kernel and I'm confident you'll make it happen. I bought a retail copy and patched it with BrazilMac's method. However, I would also try the BOOT-132 method. Other links to guides are listed in my signature.
  6. Hello sir or madam, This thread was established for ALC262 audio hardware troubleshooting. You have an ALC880. Feel free to follow these instructions which will start you out on the right path: 1) Get your codec dump via KNOPPIX. (See metajames' post). 2) Get Taruga's AppleHDAPatcher (Version 1.20). Drop your codec dump onto the patcher. 3) Before rebooting, open "Disk Utility" and repair the permissions on your Leopard installation. 4) Reboot. You can also check Taruga's new wiki to see if your hardware has already been patched. If you're not satisfied with the results, consider using codecgraph + graphviz. Study the pin complex layout and reference BronxBoy's earlier post on how he/she changed Info.plist in AppleHDA.kext to gain the required result. I did and experienced some success (speakers, headphone, line-in works, but speakers and headphone outpout at same time). Otherwise, consider giving Insanelymac's search engine another go for "alc880". If that doesn't work, use Google (specifically this "alc880 site:insanelymac.com" without quotes, of course).
  7. Hello everyone, So I used Codecgraph (thanks for the suggestion) + Graphviz and studied my sound card's pin layout. Then I took a look at BronxBoy's modifications he made to Info.plist in AppleHDA.kext, and this attached AppleHDA.kext is what I came up with it. If you choose to use it, make sure you repair your permissions before you reboot, and make sure the output is set to "Headphones" in your "System Preferences -> Sound". (Disclaimer: this kext is provided with no guarantee of success.) Headphone output works, but outputs simultaneously to the speakers. Better than no headphones at all. Line In works for the Mic. This next part is important. If you're a Lenovo laptop user like me (see sig for details), you need to be using the vanilla kernel. If you're using Netkas' kernel (and I may assume any other ToH kernel), when you try and sleep, it won't wake up. With the vanilla kernel, sleep doesn't work, BUT that's to your advantage with the Lenovo. For some reason, when you invoke sleep, it will wake up moments later and bang! there's the audio. You may hear some buzzing out of your speakers when nothing happens for awhile. I don't know why. If you change the volume or your playing something it goes away. Also, if you make sure your computer isn't buzzing before you shut down, it will shutdown all the way. If it's buzzing when you shut down, it kernel panics (which isn't seen unless you booted in verbose mode -v) and your trackpad stays lit blue. Your computer's still on and sucking life out of your battery. Then you have to hold the power for 7 seconds or so to shut it down. Hope this helps. This is the best I can do for now. Any insight from anyone on how to improve this, I'm all ears. AppleHDA.kext_ALC262_Lenovo_3000_Y410.zip
  8. BronxBoy, I'm glad I could make someone laugh with my ranting. Seriously, though, I was looking for any info on the ALC262 and found this URL: http://www.realtek.com.tw/downloads/downlo...;Downloads=true I don't know how good you are at deciphering these schematics, but it looks like you can get the latest audio controller schematic for the ALC262. I don't know if you're interested in helping to decipher this in connection with the my audio problem. Or if you can shed some insight on what I would need to change in AppleHDA to properly map the pins to my audio device...
  9. I must be stupid or something. I've tried every single one of these codec dumps, installing them the way I've been directed, and I get the same thing: audio only works after I put the laptop to sleep (which it doesn't "sleep", more like "naps", then wakes back up after a second), audio works but then I get buzzing out of my speakers after about 15-20 seconds of non-use, I've never had headphone output (I don't know how you or anyone else is getting that, BronxBoy) and I can't shut down because AppleHDA causes a kernel panic. Can anyone please tell me what they think "perfect" or "working" audio is? Is it "working after jumping a few hundred fiery hoops" or "I turn on my computer, Mac OS comes up, I can adjust audio with no problems whatsoever, no buzzing noise happens, etc." If it's the former, fine I'll have to live with that. If it's the latter, then I must be stupid. Can you smell the frustration?
  10. ALC262_837 internal speakers = yes headphones = no digital out = not tested Mic = yes (I think) Tried 0.4 MadMad Beta drivers. Audio out of speakers no longer has metronome-style "tick" or buzzing. That's progress. Still cannot hear anything out of the headphones. Still have to put laptop to sleep before any audio comes out. Is that characteristic of this laptop or something? Here's how I installed your driver: 1) Taruga HDAPatcher 1.20 + your .TXT file representing the codec. 2) Installed your AppleHDA.kext. 3) Repaired permissions. 4) Rebooted. Sorry I didn't get back to you sooner. Had an accident. Still recovering. Any ideas on how I can make my audio fully functioning? Thanks!
  11. BronxBoy, What's going on? I'm grateful that someone has dedicated themselves to specifically getting the ALC262 chipset running for everyone. Thanks for all your efforts to make this happen. With that being said, I do not have a Vaio. But I do have a Lenovo 3000 Y410 laptop. On paper, it appeared to spec out just like a MacBook. However, that is apparently not the case, especially with the audio. (Again, I'll give props to Taruga for all his/her help.) I'm only able to get speaker out using my codec dump and Taruga's HDA Patcher. I can control the volume from my my custom keyboard controls, but I have no headphone, and no mic or line in. AND, in order to get audio out of the speakers, I have to put it to sleep first. After it wakes back up a moment later, I get audio, but with a *buzz* or a steady metronome-style *pop* like you'd make with your tongue off the roof of your mouth. Attached is my codec, which I'll call "ALC_837.txt" That's right, this one is completely different than all the rest. Apparently, I'm the only idiot without sound working with the ALC262 chipset. So if you wouldn't mind taking a look at it with some ideas on what I'm missing, that would be appreciated. I've tried all your codecs with the HDAPatcher. The "200" gave me the best results, but is no different than using my current codec dump, no headphones, no mic or line-in. Thanks for any help you might give! ALC262_837.TXT
  12. Output from HDAudio.kext v6: Feb 4 06:23:27 localhost kernel[0]: HDAudio[0x3fc6200]::CodecDetection-started(0x3cc3200) by Taruga Feb 4 06:23:27 localhost kernel[0]: HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 284b Feb 4 06:23:27 localhost kernel[0]: Cad Address: 0 Feb 4 06:23:27 localhost kernel[0]: Vid/Pid : 0x10ec0262 Feb 4 06:23:27 localhost kernel[0]: Subsystem : 0x17aa3837 Feb 4 06:23:27 localhost kernel[0]: Revision : 0x00100002 Feb 4 06:23:27 localhost kernel[0]: First nid : 2 of 35 Feb 4 06:23:27 localhost kernel[0]: Nid 0x02 0x00000011 DAC Feb 4 06:23:27 localhost kernel[0]: Nid 0x03 0x00000011 DAC Feb 4 06:23:27 localhost kernel[0]: Nid 0x06 0x00000211 DAC Digital Feb 4 06:23:27 localhost kernel[0]: Nid 0x07 0x0010011b ADC Feb 4 06:23:27 localhost kernel[0]: Nid 0x08 0x0010011b ADC Feb 4 06:23:27 localhost kernel[0]: Nid 0x09 0x0010011b ADC Feb 4 06:23:27 localhost kernel[0]: Nid 0x0a 0x00100391 ADC Digital Feb 4 06:23:27 localhost kernel[0]: Nid 0x0b 0x0020010b Mixer Feb 4 06:23:27 localhost kernel[0]: Nid 0x0c 0x0020010f Mixer Feb 4 06:23:27 localhost kernel[0]: Nid 0x0d 0x0020010f Mixer Feb 4 06:23:27 localhost kernel[0]: Nid 0x0e 0x0020010e Mixer Feb 4 06:23:27 localhost kernel[0]: Nid 0x14 A:0x01 S:0x00 0x99130110 Pin Complex Feb 4 06:23:27 localhost kernel[0]: Nid 0x15 A:0x0f S:0x00 0x411111f0 Pin Complex Feb 4 06:23:27 localhost kernel[0]: Nid 0x16 A:0x02 S:0x00 0x99130120 Pin Complex Feb 4 06:23:27 localhost kernel[0]: Nid 0x18 A:0x04 S:0x00 0x01a19840 Pin Complex Feb 4 06:23:27 localhost kernel[0]: Nid 0x19 A:0x04 S:0x0f 0x99a3094f Pin Complex Feb 4 06:23:27 localhost kernel[0]: Nid 0x1a A:0x0f S:0x00 0x411111f0 Pin Complex Feb 4 06:23:27 localhost kernel[0]: Nid 0x1b A:0x01 S:0x0f 0x0121441f Pin Complex Feb 4 06:23:27 localhost kernel[0]: Nid 0x1c A:0x0f S:0x00 0x593301f0 Pin Complex Feb 4 06:23:27 localhost kernel[0]: Nid 0x1d A:0x02 S:0x0d 0x40168a2d Pin Complex Feb 4 06:23:27 localhost kernel[0]: Nid 0x1e A:0x03 S:0x00 0x01451130 Pin Complex Feb 4 06:23:27 localhost kernel[0]: Nid 0x1f A:0x0f S:0x00 0x411111f0 Pin Complex Feb 4 06:23:27 localhost kernel[0]: Nid 0x22 0x0020010f Mixer Feb 4 06:23:27 localhost kernel[0]: Nid 0x23 0x0020010f Mixer Feb 4 06:23:27 localhost kernel[0]: Nid 0x24 0x0020010f Mixer Keep it up, Taruga! P.S. The audio hardware is an ALC262 onboard audio controller from a Lenovo 3000 y410 laptop. I really need to add my hardware specs to my signature, don't I? Thanks again!
  13. Taruga, My audio controller is a Realtek ALC262, on-board for a Lenovo 3000 Y410 laptop. Here's my codec dump from Knoppix: Codec: Realtek ALC262 Address: 0 Vendor Id: 0x10ec0262 Subsystem Id: 0x17aa3837 Revision Id: 0x100002 Default PCM: rates 0x560, bits 0x0e, types 0x1 Default Amp-In caps: N/A Default Amp-Out caps: N/A Node 0x02 [Audio Output] wcaps 0x11: Stereo PCM: rates 0x560, bits 0x0e, types 0x1 Node 0x03 [Audio Output] wcaps 0x11: Stereo PCM: rates 0x560, bits 0x0e, types 0x1 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital PCM: rates 0x560, bits 0x1e, types 0x1 Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] PCM: rates 0x160, bits 0x06, types 0x1 Connection: 1 0x24 Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] PCM: rates 0x160, bits 0x06, types 0x1 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] PCM: rates 0x160, bits 0x06, types 0x1 Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital PCM: rates 0x560, bits 0x1e, types 0x1 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x80 0x80] Connection: 6 0x18 0x19 0x1a 0x1b 0x1c 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] [0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00] Connection: 2 0x02 0x0b Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x083e: IN OUT HP Detect Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0x40: OUT Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x083e: IN OUT HP Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Connection: 2 0x0c 0x0d* Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00] Pincap 0x0810: OUT Pin Default 0x99130120: [Fixed] Speaker at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0x40: OUT Connection: 1 0x0e Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x01a19840: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink Pin-ctls: 0x24: IN Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x99a3094f: [Fixed] Mic at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0x24: IN Connection: 2 0x0c* 0x0d Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Connection: 2 0x0c* 0x0d Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x08173e: IN OUT HP Detect Pin Default 0x0121441f: [Jack] HP Out at Ext Rear Conn = 1/8, Color = Green Pin-ctls: 0xc0: OUT HP Connection: 2 0x0c* 0x0d Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x593301f0: [N/A] CD at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0x00: Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x40168a2d: [N/A] Speaker at Ext N/A Conn = Digital, Color = Purple Pin-ctls: 0x00: Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital Pincap 0x0810: OUT Pin Default 0x01451130: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Black Pin-ctls: 0x00: Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400280: Mono Digital Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono Node 0x22 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Connection: 9 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b Node 0x23 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Connection: 9 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b Node 0x24 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Connection: 9 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b Here's the output from HDAudio v5: Jan 17 07:20:17 localhost kernel[0]: HDAudio[0x3f5e200]::CodecDetection-started(0x3cc1280) by Taruga Jan 17 07:20:17 localhost kernel[0]: HDAudio::D27:F0 Irq: 22 Vid: 8086 Pid: 284b Jan 17 07:20:17 localhost kernel[0]: codec_mask = 0x00000000 Jan 17 07:20:17 localhost kernel[0]: HDAudio::Cad Address: 0 Jan 17 07:20:17 localhost kernel[0]: HDAudio::Vid/Pid : 0x10ec0262 Jan 17 07:20:17 localhost kernel[0]: HDAudio::Subsystem : 0x17aa3837 Jan 17 07:20:17 localhost kernel[0]: HDAudio::Revision : 0x00100002 Jan 17 07:20:17 localhost kernel[0]: STATESTS : 0x00000000 Jan 17 07:20:17 localhost kernel[0]: FGroups: : 0x00010001 Jan 17 07:20:17 localhost kernel[0]: Widgets: : 0x00020023 Jan 17 07:20:17 localhost kernel[0]: FGroupType : 0x00000101 Jan 17 07:20:17 localhost kernel[0]: First nid : 2 of 35 Jan 17 07:20:17 localhost kernel[0]: Nid 0x02 0x00000011 DAC Jan 17 07:20:17 localhost kernel[0]: Nid 0x03 0x00000011 DAC Jan 17 07:20:17 localhost kernel[0]: Nid 0x06 0x00000211 DAC Digital Jan 17 07:20:17 localhost kernel[0]: Nid 0x07 0x0010011b ADC Jan 17 07:20:17 localhost kernel[0]: Nid 0x08 0x0010011b ADC Jan 17 07:20:17 localhost kernel[0]: Nid 0x09 0x0010011b ADC Jan 17 07:20:17 localhost kernel[0]: Nid 0x0a 0x00100391 ADC Digital Jan 17 07:20:17 localhost kernel[0]: Nid 0x0b 0x0020010b Mixer Jan 17 07:20:17 localhost kernel[0]: Nid 0x0c 0x0020010f Mixer Jan 17 07:20:17 localhost kernel[0]: Nid 0x0d 0x0020010f Mixer Jan 17 07:20:17 localhost kernel[0]: Nid 0x0e 0x0020010e Mixer Jan 17 07:20:17 localhost kernel[0]: Nid 0x14 A:0x01 S:0x00 0x99130110 Pin Complex Jan 17 07:20:17 localhost kernel[0]: Nid 0x15 A:0x0f S:0x00 0x411111f0 Pin Complex Jan 17 07:20:17 localhost kernel[0]: Nid 0x16 A:0x02 S:0x00 0x99130120 Pin Complex Jan 17 07:20:17 localhost kernel[0]: Nid 0x18 A:0x04 S:0x00 0x01a19840 Pin Complex Jan 17 07:20:17 localhost kernel[0]: Nid 0x19 A:0x04 S:0x0f 0x99a3094f Pin Complex Jan 17 07:20:17 localhost kernel[0]: Nid 0x1a A:0x0f S:0x00 0x411111f0 Pin Complex Jan 17 07:20:17 localhost kernel[0]: Nid 0x1b A:0x01 S:0x0f 0x0121441f Pin Complex Jan 17 07:20:17 localhost kernel[0]: Nid 0x1c A:0x0f S:0x00 0x593301f0 Pin Complex Jan 17 07:20:17 localhost kernel[0]: Nid 0x1d A:0x02 S:0x0d 0x40168a2d Pin Complex Jan 17 07:20:17 localhost kernel[0]: Nid 0x1e A:0x03 S:0x00 0x01451130 Pin Complex Jan 17 07:20:17 localhost kernel[0]: Nid 0x1f A:0x0f S:0x00 0x411111f0 Pin Complex Jan 17 07:20:17 localhost kernel[0]: Nid 0x22 0x0020010f Mixer Jan 17 07:20:17 localhost kernel[0]: Nid 0x23 0x0020010f Mixer Jan 17 07:20:17 localhost kernel[0]: Nid 0x24 0x0020010f Mixer If understand what you're looking for, the Address and Subsystem appear to match. Thanks for your work.
  14. AppleHDA Solution - Work in progress

    ALC 262 UPDATE: Taruga's installer he made for me in a previous post gives me audio output to speakers, but only after I put it to sleep and it wakes up by itself. I can use my volume controls and mute controls. However, there is a consistent *pop* every 5-7 seconds (don't have exact timing). It's the kind of *pop" that happens when you snap your tongue inside your mouth, does that make sense? Still can't see any available devices in Apple System Profiler. Headphone output doesn't work. When I plug something into the Line In the audio meter bounces, but I haven't recorded anything yet. Any there any other advances being made on the ALC 262 side of things?
×