Jump to content

jura_11

Members
  • Content Count

    33
  • Joined

  • Last visited

About jura_11

  • Rank
    InsanelyMac Protégé

Recent Profile Visitors

1,517 profile views
  1. jura_11

    ALC1150 X99 problems

    Hi guys I'm struggling get to work my ALC1150 on X99 platform Here are all my attached files like from DPCIManager,IORegistry etc Simply I'm struggling with that get working onboard ALC1150 working on my X99,in DPCIManager Realtek ALC1150 is recognised,under HDEF is correct layout etc,I've added my config,plist too which should help Really not sure what I'm doing wrong,I've tried to use VoodooHDA but I've issues with that as sound after while started get distorted Thanks for any help guys,Jura Terminal Saved Output ALC.zip Terminal Saved Output.zip config.plist.zip Jura’s Mac Pro.zip
  2. Hi there ES means Engineering sample,its pre-production chip,usually those chips are recognized as Genuine Intel CPU in CPU-Z,ES chips usually don't have full turbo boost etc Is yours chip/CPU correctly recognized in CPU-Z? In BIOS what settings are you have enabled? With some BIOS settings my turbo is still enabled and its not downclocking as should be,tried several settings like enabling EIST,plus C-States and enabling Intel SpeedStep With disabled EIST and enabled C-States my turbo speed has been 2.38GHz on E5-2683v3 ES,same like with i7-5820k with OC 4.4GHz my turbo is 4.4GHz(actual turbo is 4.38GHz) and its not downclocking to lower 1.22GHz as should be With this my Geekbench is pretty much in line with other comparable results,but still is bit pain with those settings as CPU running in higher clocks,temps will be higher than with proper power management You can try this and you will see.. Then I tried with enabled EIST and disabled Intel SpeedStep and my power management is like should be,but in Geekbench I'm loosing big chunk of speed like in Cinebench and Logic X too,speeds are bouncing from 1.22GHz to 3.66GHz to 4.38GHz on i7-5820k... Hope this helps Thanks,Jura
  3. Hi there Yes on mine I've been able to run Turbo,my Xeon has been ES and my turbo has been 2.3GHz,although I've OC that chip through the BCLK and have run this chip at 2.38GHz Regarding SSDT,please have look on this https://github.com/Piker-Alpha/ssdtPRGen.sh Piker over on Github is really supporting his thread and if you run to any issue,which you shouldn't Plus check what yours turbo is in Windows,I think on yours you should be at 3.2GHz,but this depends if yours is normal chip or ES Yours chip is ES ? I will try post later tomorrow or during weekend my BIOS settings for turbo,but my motherboard is ASRock Extreme6,what motherboard you have there? Hope this helps Thanks,Jura
  4. Hi there What Xeon are you running/using ? I've run E5 2683 V3 for several months on my X99,did you tried to create SSDT for this ? And did you tried VoodooTSCSync ? Regarding BIOS,what settings do you have enabled in BIOS? Hope this helps Thanks,Jura
  5. jura_11

    X99 Audio issue

    Hi Toleda Sorted,finally found what i''m missing there and now everything is working there and thanks for this Thanks,Jura
  6. jura_11

    X99 Audio issue

    Hi there Can you post best way how to install 1150 audio,really not sure what I'm doing wrong there I've run every patch from above posted thread Thanks in advance,Jura
  7. jura_11

    X99 Audio issue

    Hi there Here are attached all informations,not sure what is wrong Tried everything and still nothing there Thanks,Jura All Messages.log.zip
  8. jura_11

    X99 Audio issue

    Oh OK I will do that again and post report there Do I need to have AppleHDA.kext in this location Clover EFI in S/L/E ? Thank,Jura
  9. jura_11

    X99 Audio issue

    Hi guys Not sure,I've issue with mine Realtek ALC to patch,tried every possible solution but still no go I've tried Toleda scripts,but seems they're not working with mine,I've uploaded mine .plist and DPCIManger window My motherboard is ASRock X99 Extreme6 or my spec is in the signature,currently I'm using M-Audio MBox 2 Mini for audio,but with that I've strange latency issues Thanks guys in advance for any help Thanks,Jura config.plist.zip
  10. Hi there I've used above DSDT fixes,you can try to use only one and you will see how it goes,in my case I'm using SMBIOS MacPr6,1 And please check this too Fix: modify the AppleGraphicsDevicePolicy.kext Open Terminal Enter this command (it is one line) sudo nano /System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleGraphicsDevicePolicy.kext/Contents/Info.plist Arrow down to where you see <key>ConfigMap</key> For the iMac15,1 locate the board-id "Mac-42FD25EABCABB274" and change string below it from "Config2" to "none". For the MacPro6,1 you will do the same thing but for the board-id "Mac-F60DEB81FF30ACF6". For the iMac17,1 you'll have to see which board-id is declared in your config.plist SMBIOS: "Mac-B809C3757DA9BB8D" or "Mac-65CE76090165799A" or "Mac-DB15BD556843C820" and change the appropriate entry to "none". Save the file by pressing Ctrl+O, then enter. Exit by pressing Ctrl+X Rebuild the kernel cache using the following two commands in terminal: sudo kextcache -system-prelinked-kernel sudo kextcache -system-caches Reboot Hope this helps there Thanks,Jura
  11. Hi there Try this,in Clover Bootloader/DSDT select or untick those FixDisplay,FixLAN,FixUSB and try again to boot,have same issue with running two different GPU(TitanX and GTX780) and after that I untick those DSDT fixes I can boot and I can use both monitors,although I'm running my displays from TitanX Hope this helps Thanks,Jura
  12. jura_11

    GTX 980 Ti driver

    Hi there As above you should try Clover bootloader,can make yours life bit easier With those new drivers from Nvidia previously I've same issue,but in my case has been down to the I'm running extra GTX780 too in second PCIE slot. But to yours issue,please try this Fix: modify the AppleGraphicsDevicePolicy.kext Open Terminal Enter this command (it is one line) sudo nano /System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleGraphicsDevicePolicy.kext/Contents/Info.plist Arrow down to where you see <key>ConfigMap</key> For the iMac15,1 locate the board-id "Mac-42FD25EABCABB274" and change string below it from "Config2" to "none". For the MacPro6,1 you will do the same thing but for the board-id "Mac-F60DEB81FF30ACF6". For the iMac17,1 you'll have to see which board-id is declared in your config.plist SMBIOS: "Mac-B809C3757DA9BB8D" or "Mac-65CE76090165799A" or "Mac-DB15BD556843C820" and change the appropriate entry to "none". Save the file by pressing Ctrl+O, then enter. Exit by pressing Ctrl+X Rebuild the kernel cache using the following two commands in terminal: sudo kextcache -system-prelinked-kernel sudo kextcache -system-caches Reboot This is best option or solution for you there,happen to me same after I updated to 10.10.5 And I'm running EVGA GTX Titan X with Palit GTX 780 on my PC Hope this helps Thanks,Jura
  13. Hi guys I'm really struggling how to switch from boot6 to boot7 in Clover as I've very same issue like this guy in this thread over here http://www.insanelymac.com/forum/topic/304347-usb-keyboard-freezes-at-windows-boot-manager-when-booting-with-clover/ Can someone let me know steps what is best way to switch from boot6 to boot7 If needs to be config posted I will post Thanks in advance,Jura
  14. Here is mine Picture is rendered in 3DS MAX with V-RAY and model exported from Poser Pro 2014 Thanks,Jura
  15. jura_11

    [HOW TO] Modification of AMD FB + Clover injection

    Hi there My Fake ID is 0x67B11002 as I've tried 0x67B1002 and my GPU has been recognized as R9 290 but with 7mb I've posted my setup over here http://www.insanelymac.com/forum/topic/298443-r9-290-non-x-yosemited-help/?p=2151246 Edit: I've just check X4000 and there I've added as you are said 0x67B01002 Hope this helps Thanks,Jura
×