Jump to content

marson

Members
  • Content Count

    23
  • Joined

  • Last visited

About marson

  • Rank
    InsanelyMac Protégé
  1. marson

    GA-Z77X-UD5H Ozmosis Guide

    @thedubiousdubber but I use Kext utility and my ethernet kext was installed in /S/L/E and still not working. Also what do you mean by : "Ozmosis not loading my Kexts from the is folder in efi" can you tell me where I should put kexts in the EFI partition? and last but not least. I thought that when use ozmosis modded BIOS all needed kext will be injected in BIOS (maybe except audio) so why do I need to adding kext to the OS? maybe I can tweak the attached BIOS to add ethernet kext?
  2. marson

    GA-Z77X-UD5H Ozmosis Guide

    I have a problem with installing OS X on my GA-Z77X-UD5H. I flashed the BIOS and prepare USB with mavericks and installation went OK but... I don't have ethernet nor on intel nor atheros NIC, of course I installed Intel E1000.kext from link in the first post but still I don't have internet. P.S could anyone describe more precisely about NVRAM script, I don't know how to modify that script, and I would like to know if imessage will work?
  3. marson

    No sound after update to 10.6.5

    Unfortunately I am not sure what was exactly installed I simply checked the following options in [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url]. 1.Krxts & enablers>Audio>Realtek ALC 8xx>ALC 8xx HDA 2.Krxts & enablers>Audio>Realtek ALC 8xx>Non-DSDT HDA Enabler>ALC885 / 889a and sound works until update through system update but it wasn't VoodooHDA, because VoodooHDA is located at Krxts & enablers>Audio>Universal and there are several voodooHDA, unfortunately if I try to use it still no sound. Any sugestions?
  4. Hi all I installed Snow Leopard using [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] and [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] method and almost everything works fine except sound. I have Gigabyte EG45M-UD2H motherboard with ALC 889A sound chip, and everythink worked fine until I updated my SL to newest version by system update, after update I had to reboot system and remove /System/Library/Extensions/AppleTymceDriver.kextand after next reboot my OSX works fine but without sound. I read somewhere that I should install an untouched rollback driver or sth, so I run [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] again and install rollback but still no sound, what should I do?
  5. hm But how I can delete the kext if I can't boot my SL? and second question. How to "rebuild caches", am I correct that I need to simply boot with -v option?
  6. Hello all First of all I am sorry for my english I had to reinstall my snow leopard, and I do it using recent [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] + [url="http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/"]#####[/url] method from tonymack's website... Installation went fine but after that I tried to install combo 10.6.6 update and when installation finished my mac doesn't boot and when I run boot with -v parameter I get the kernel panic near ACPI SMC PlatformPlugin. Below is my system spec: Gigabyte GA-EG45M-UD2H (with Intel ALC 889A audio chip and Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet) C2D E8600 CPU ZOTAC GEFORCE GT240 512MB DDR5 . My question is, what I can do to solve this problem and run my OSX again using 10.6.6 update The photo below is the kernel panic screen
  7. marson

    what graphics card for hackintosh

    I found very interesting graphic card such as ZOTAC GEFORCE GT240 512MB DDR5 and I hardly consider buing it. So is there anyone who tried using it with snow leopard? P.S I found some topics on insanelymac about this card but my english is not enough to be sure if this card will be work ok or not
  8. marson

    what graphics card for hackintosh

    Hi all first of all I am sorry for my english. I need to buy a new cheap graphics card because my actual grapchics was damaged, so what graphic card could you recommend? I want to use the snow leopard with vanilla kernel so I prefer to work with my graphic out of the box or with as small modifications as possible. Because I have a DVI monitor I want to have it on my grapchic card, and I want to work with 1820x1080 full HD resolution, ofcourse with QE/CI. It doesn't matter for me if it will be ATI or nvidia, and also I am not a gamer, so I don't need a super quality in games. The priority for me is the price. The lower, the better Regards Marek
  9. Hi everybody I have Toshiba A500-1G2 laptop and after many trials and errors I finally installed Snow leopard with the vanilla kernel, but one more think I can't solve. In my laptop I have an Realtek RTL8191SE whih are not working and due to my knowledge there is no way to run it. So I want to replace original Realtek with a new one that will be supported in snow leopard. What kind of miniPCI wi-fi card can I use? In addition the original wifi works in N standard so I think the new one must also support the N standard. Below is my full spec of this Toshiba laptop: Toshiba Satellite A500-1G2 Intel® Core™ i5-430M processor 4 GB of DDR3 RAM 500 GB Fujitsu HDD GeForce 310M Graphics Card Realtek ALC 889A Realtek 8111/8169 Controller Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC Chicony 1,3 MPix WebCam P.S except wi-fi all otheer stuff works OK and this laptop could be a good replacement for macBook especially after 10.6.4 update wchih enables Core i5 processors support natively Best Regards Marek
  10. Hello all First of all I am sorry for my english, I am from Poland and english is not my native language. I consider buying a laptop with following specs DELL Studio 1749 Intel i5-430M(2,26GHz) processor 4 GB ram 1333MHz DDR3 2x 320 GB HDD 7200 RPM probably as RAID 0 matrix but I am not sure ATI Mobility Radeon HD 5650 grapchics card with 1 GB of dedicated ram WebCam 2.0 mpx Dell Wireless 1520 (802.11n Dell Bluetooth 365 I don't know anythink about ethernet card and about sound card. Can anybody tell me that can I run leo or snow leo on this laptop, I am affraid especially about webcam, bluetooth and wireless, can anybody confirm if wireless, bluetooth and webcam works? P.S I think that sound chip should based on ITD chip because I found such information in pne pf polish laptops forum
  11. I want to buy a netbook and I want to install mac OS X onto it, What netbook you can recomment. I want to have possibility to install an retail OSX not ideneb kalyvay etc. I also want to run all component like wifi, LAN, graphics and audio. The vendor, disk capacity how much memory will be etc. are not important for me, but I want min. 10'' display. Is there exist such netbook? What about NTT netboox in general anyone tried it? P.S I have akces to Leopard and snow leopard so it will be fine if I can use snow leopard not leopard
  12. marson

    Gigabyte GA-EG45M-UD2H

    First of all I am osorry for my english I have successfully instaled 10.5 leopard on Gigabyte EG45M-UD2H For proper install I used the following kexts: AppleDecrypt.kext AppleRTL8169Ethernet.kext OpenHaltRestart.kext disabler.kext VoodooHDA Personally in addition I have to use VoodooPS2Controller I don't know anythink about an integrated card on EG45M-UD2H because I use an externak graohics card in PCI-Express slot. In my case everythink works fine exceot ine small think, when I open an system preferences the siund chip is identified as Ynknown, all other thinks like shuddown, restart, sleep, SATA, eSATA and IDE controllers works fine. Best Regards
  13. Hi all I bought an Gigabyte GA-EG45M-UD2H motherboard. This motherboard have an Intel G45 chipset and Intel ICH-10R south bridge. I know that the best chipset for OSX is intel P45, but I couldn't forund any motherboard based on P45 chipset that has an ESATA port. Is it possible to install vanilla OS X 10.5 e.g using boot-132 or other using method. I know that the Integrated Intel Graphics Media Accelerator X4500HD doesn't work properly with OSX but it is not a problem for me because I will use an PCI-Express external card. If it is possible to install OS X in this motherboard how to do this, can anyone tell me what kext's can I use, whch boot-132 should I use, where to download it etc, etc. In other words I need some tips and suggestions or a short tutorial how to install leopard P.S is this possible to include a path into boot-132 that allows me to use PS/2 keyboard? Or if not how can I install it after OS X installation P.S 2 and for the future. Is there anyone who tried to install snow leopard on this motherboard? Sorry for my mistake, my motherboard is Gigabyte GA-EG45M-UD2H not Gigabyte GA-EG45M-UDS2H
×