Jump to content

Naborisk

Members
  • Content count

    14
  • Joined

  • Last visited

About Naborisk

  • Rank
    InsanelyMac Protégé

Recent Profile Visitors

411 profile views
  1. Naborisk

    Surface Pro 2017 Hackintosh High Sierra

    I haven't been here for a while. I recommend disconnecting and reconnecting the type cover if it stops working. Have you got it to work yet? I'm also still looking for a fix on this. It seems like we need a DSDT patch made for our device since our battery seems to be different from the one in the Surface Pro 4. Here's a guide on manually patching the DSDT if you wanna try: https://www.tonymacx86.com/threads/guide-how-to-patch-dsdt-for-working-battery-status.116102/
  2. Naborisk

    Lets Hackintosh the Surface pro 5 (2017)

    Opps, my bad I didn't clarify, I'll try to explain as clearly as possible. At first I thought you haven't installed yet so I said that in case you're booting into the installer. If the patch is in place, booting into a new installation or the macOS Installer will cause kernel panic since clover cannot patch the kext outside of kernel cache. So, to bypass this we need to boot the OS with an invalid platform-id (normally 0x12345678), that will prevent kernel panic while disabling graphics, and then we can rebuild kernel cache while inside the OS. Then after the kernel cache have been rebuilt we can boot with the patch on and a valid ig-platform-id (in this case 0x59160000). To recap: Boot with invalid ig-platform-id > rebuild kernel cache > Boot again with valid ig-platform-id So assuming you have a clean macOS installation that works but has no graphics, you can try booting with my config and it should cause a kernel panic, then you can boot once with an invalid ig-platform-id of 0x12345678 and run "sudo kextcache -i /" in terminal and reboot with a valid ig-platform-id (i.e. 0x59160000), that should then enable the graphics.
  3. Naborisk

    Surface Pro 2017 Hackintosh High Sierra

    Nice! Do brightness work? Battery indicator is something I'm desperate to fix too XD, there's a DSDT patch for Surface Pro 4 to use with ACPIBatteryManager kext but I doubt that'll work. Here's my EFI Folder, I'm now using AppleALC instead of VoodooHDA for audio
  4. Naborisk

    Surface Pro 2017 Hackintosh High Sierra

    ig-platform-id of 0x12345678 should disable the hardware acceleration. maybe try this: - while booting with ig-platform-id 0x12345678 open terminal and run "sudo kextcache -i /" (without quotes) - reboot and while in clover, change ig-platform-id to 0x59160000
  5. Naborisk

    Surface Pro 2017 Hackintosh High Sierra

    Seems you got Graphics Acceleration working. That might be Iris Pro related problem since I have i5 with HD620 and has no glitches.
  6. Naborisk

    Lets Hackintosh the Surface pro 5 (2017)

    Try this folder: EFI_24042018.zip If you're booting to the installer, while in clover menu, go to options > graphics injector and change ig-platform-id to 0x12345678 Make sure to disable secure boot in BIOS (tpm can be left enabled). As for boot order I dragged USB on top of everything
  7. Naborisk

    Surface Pro 2017 Hackintosh High Sierra

    Yea, macOS High Sierra installer probably converts your drive into APFS filesystem. Clover can’t see APFS so you need to put apfs.efi in Clover/drivers64UEFI. But what I would recommend is to reinstall macOS and prevent the installer from converting you drive to APFS: https://www.tonymacx86.com/threads/guide-avoid-apfs-conversion-on-high-sierra-update-or-fresh-install.232855/. Or if your drive is HFS+ and clover still can’t see it then check in Clover/drivers64UEFI and see if hfsplus.efi is there.
  8. Naborisk

    Lets Hackintosh the Surface pro 5 (2017)

    Can you boot with -v flag and try to take a picture of the result? stop sign usually means bad USB so maybe you can try another flash drive
  9. Naborisk

    Surface Pro 2017 Hackintosh High Sierra

    Thanks a lot, my backlight is now working. Surprisingly enough, backlight keys also work (fn + del/ fn + backspace), that was quite unexpected though. I've also managed to get sound working through AppleALC by injecting layout id 3. At first I did follow that tutorial and I was confused on the DSDT/SSDT part thinking that I need my DSDT/SSDT to be patched but it turns out I just have to put SSDT-PNLF.aml in the ACPI/patched folder. BTW, do you have smooth brightness transition when pressing brightness button and/or sleeping/waking?
  10. Naborisk

    Lets Hackintosh the Surface pro 5 (2017)

    Strange, at least clover should show up. Please make sure that USB is on the top of the list in the boot order and that Secure Boot is turned off. You can also try booting directly from the USB from the BIOS by swiping right on USB in the boot order menu. clover used to not show up for me too but that's not the case anymore. BTW which macOS version are you using? and are you trying to boot the installation USB or the OS?
  11. Naborisk

    Lets Hackintosh the Surface pro 5 (2017)

    For some reason I can't upload my EFI zip here so I've uploaded it at mega. Here you go https://mega.nz/#!vYsW1YjL!SDNwth2ig97gwddKjQWf56tQ7kBfVckwa01WnWpa_tY
  12. Naborisk

    Lets Hackintosh the Surface pro 5 (2017)

    I'm also using i5 8gb and it boots fine. FYI I'm booting from external usb drive but I'm not sure if that makes a difference. Can you attach a picture of the log? Maybe you could also try the file attached below, it's pulled from the working usb drive. config.plist P.S.: BTW this config will NOT boot the installer, if I'm not mistaken you can disable the kext patch for graphics to boot the installer.
  13. Surface Pro 2017 - macOS Sierra 10.13.4 with Graphics Acceleration Working Working: - Graphics Acceleration - using clover patch - Audio (Speakers and Headphone Jack, even microphone) - using AppleALC - Type Cover (keyboard works perfectly/ no trackpad gestures) - Brightness - using Rehabman patch Partially Working / Maybe: - Sleep/ Wake - Monitor did sleeps and wake but I'm unsure if the CPU really sleeps Not Working: - WiFi (probably never will) - workaround: USB dongle - Bluetooth - workaround: USB dongle - Camera - Touchscreen (I don't expect it to work anyways) - Trackpad gestures the EFI folder is attached below Installation - make a bootable usb using /createinstallmedia tool on a Mac - install clover onto the bootable usb we've created - while installing, the default config file from the EFI folder I provided will not work, to make it work for installation, change ig-platform-id to 0x12345678 - install macOS - upon installing macOS High Sierra, don't forget to disable APFS conversion, you can follow this guide: https://www.tonymacx86.com/threads/guide-avoid-apfs-conversion-on-high-sierra-update-or-fresh-install.232855/ - boot with the EFI folder attached below - for the first boot, please change ig-platform-id to 0x12345678 and after booting successfully, rebuild kextcache by running "sudo kextcache -i /" in terminal - profit! My newer EFI folder with AppleALC instead of VoodooHDA for audio (Thanks emileet for the suggestion) link: https://mega.nz/#!3BsAGCyI!-wBPvCNHGwxN3pa0HS4i-6OfmpsIILrGIqllhaSL-cQ config.plist
  14. Naborisk

    Lets Hackintosh the Surface pro 5 (2017)

    Nice to find someone opening up a thread for this, actually I've been trying to hackintosh my Surface Pro 2017 for a while now here's the list of the things I've got working so far - Graphics (Full QE/CI) - some edits from rehabman's laptop config file will fix the black screen - Audio - using voodoohda (both speakers and headphone jack works) if you're getting a black screen with backlight on it means you've got graphics working, but due to the resolution of the Surface Pro's monitor being so high there needs to be a patch that will allow for more memory allocation (if I'm not mistaken) I'll upload my config here later. EDIT: here you go It would be nice I someone could help me fix the brightness config.plist
×