Jump to content

r2tincan

Members
  • Content Count

    38
  • Joined

  • Last visited

About r2tincan

  • Rank
    InsanelyMac Protégé

Recent Profile Visitors

1,622 profile views
  1. Not intended to rude!! Thank you.
  2. I was browsing a thread and I can't check any thread past page 1. Using the newest version of chrome on a real mac. There is an endless screen that says "Loading". Definitely not loading, there's no traffic moving on my browser. Also when I open an incognito browser and navigate directly to page 2 or something, it loads, but loading subsequent pages do not. WTF is going on here?
  3. So I upgraded to the final build of 10.12.6 and I still can't get Above 4g decoding to work. I get to the apple logo, a halfway full load bar, and then no further loading. Ideas?
  4. Did it work also with 12.5? First round beta kinda scary for me
  5. Say more? What does this mean?
  6. Say more? Which GPU are you using? Which motherboard and thunderbolt card? I have 2x GPUs
  7. Have you tried anything specific to troubleshoot?
  8. looks enabled. voltage reporting WAS working before Power Management was working, which is interesting.
  9. I think Turbo may be working now. I get up to 2.6GHz with all cores, which I think might be normal? Does anyone know why I would never be going above 2 watts on the power monitor though?
  10. It's necessary for me to enable "Above 4G Decoding" so I can install my Thunderbolt card with 2x graphics cards. It looks like people with other boards aren't having a problem getting this to work. When I enable it, OSX boots up and the graphics turn to gobbledigook. With it disabled and all cards installed, the system will not POST. Anyone know how I can trouble shoot this? I tried a verbose boot and nothing looks out of the ordinary, the graphics get {censored}ed after PCI Configuration Begin. If I disable USB 3.0 completely I can boot into OSX. Thanks
  11. Sorry, yes I did. It recongnized my CPU without issue. I used the -m MacPro6,1 and -x 1 flags. I then generated vectors based on iMac16,2 and 17,1, and MacPro6,1 without much difference.
  12. I am so confused and frustrated. I have tried many different configurations and I'm not even sure if this is working or not. My end goal is *just to be able to use TURBO* with my Xeon, as it's been stuck running at non-turbo frequency since I built this hack two years ago. Please help me, haha. This is my current output from apple intel info: AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved enableHWP................................: 0 Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 0 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0x16e63d2c3a6f2 (16785 MHz) MWAIT C-States...........................: 8480 Processor Brandstring....................: Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz Processor Signature..................... : 0x306F2 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 2 - Model................................ : 0x3F (63) Model Specific Registers (MSRs) ------------------------------------------ MSR_CORE_THREAD_COUNT............(0x35) : 0xFFFFFF80718EC000 ------------------------------------------ - Core Count........................... : 8 - Thread Count......................... : 16 MSR_PLATFORM_INFO................(0xCE) : 0x80C33F3811800 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x18 (2400 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 1 (LPM supported) - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 12 - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x8400 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT) - CFG Lock............................. : 1 (MSR locked until next reset) - C3 State Auto Demotion............... : 0 (disabled/unsupported) - C1 State Auto Demotion............... : 0 (disabled/unsupported) - C3 State Undemotion.................. : 0 (disabled/unsupported) - C1 State Undemotion.................. : 0 (disabled/unsupported) - Package C-State Auto Demotion........ : 0 (disabled/unsupported) - Package C-State Undemotion........... : 0 (disabled/unsupported) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414 ------------------------------------------ - LVL_2 Base Address................... : 0x414 - C-state Range........................ : 1 (C6 is the max C-State to include) IA32_MPERF.......................(0xE7) : 0x23BC0C43D2 IA32_APERF.......................(0xE8) : 0x26817ADD2B MSR_FLEX_RATIO...................(0x194) : 0x0 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x1BF300001A00 ------------------------------------------ - Current Performance State Value...... : 0x1A00 (2600 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0x1800 ------------------------------------------ - Target performance State Value....... : 0x1800 (2400 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x88220000 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 0 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 34 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x570A00 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 87 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000 ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2020202020202020 ------------------------------------------ - Maximum Ratio Limit for C01.......... : 20 (3200 MHz) - Maximum Ratio Limit for C02.......... : 20 (3200 MHz) - Maximum Ratio Limit for C03.......... : 20 (3200 MHz) - Maximum Ratio Limit for C04.......... : 20 (3200 MHz) - Maximum Ratio Limit for C05.......... : 20 (3200 MHz) - Maximum Ratio Limit for C06.......... : 20 (3200 MHz) - Maximum Ratio Limit for C07.......... : 20 (3200 MHz) - Maximum Ratio Limit for C08.......... : 20 (3200 MHz) IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1 ------------------------------------------ - Power Policy Preference...............: 1 (highest performance) MSR_POWER_CTL....................(0x1FC) : 0x2904005B ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 1 (enabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x78330001582A8 ------------------------------------------ - Package Power Limit #1............... : 85 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1) - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds) - Package Power Limit #2............... : 102 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2) - Time Window for Power Limit #2....... : 3 (20 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x1F7DE9 ------------------------------------------ - Total Energy Consumed................ : 125 Joules (Watt = Joules / seconds) MSR_PKG_POWER_INFO...............(0x614) : 0x2F0550014002A8 ------------------------------------------ - Thermal Spec Power................... : 85 Watt - Minimum Power........................ : 0 - Maximum Power........................ : 170 - Maximum Time Window.................. : 0 MSR_PP0_POWER_LIMIT..............(0x638) : 0x0 MSR_PP0_ENERGY_STATUS............(0x639) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0 MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x18 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0xA00550001502A8 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0xA0055000000000 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC6_IRTL...................(0x60b) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0 IA32_TSC_DEADLINE................(0x6E0) : 0x16E63D5A97F75 CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz) Maximum non-Turbo Ratio/Frequency........: 24 (2400 MHz) Maximum Turbo Ratio/Frequency............: 32 (3200 MHz) P-State ratio * 100 = Frequency in MHz ------------------------------------------ CPU P-States [ 25 (26) ] CPU C6-Cores [ 0 2 4 6 8 10 12 15 ] CPU C6-Cores [ 0 2 3 4 6 8 10 11 12 13 15 ] CPU C6-Cores [ 0 2 3 4 6 7 8 9 10 11 12 13 14 15 ] CPU C6-Cores [ 0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] CPU P-States [ 25 26 (30) ] CPU P-States [ 22 25 26 (29) 30 ] CPU P-States [ (12) 21 22 25 26 29 30 ] CPU P-States [ 12 20 21 22 25 26 29 30 (32) ] CPU P-States [ (12) 19 20 21 22 25 26 29 30 32 ] CPU P-States [ 12 19 20 21 22 (24) 25 26 29 30 32 ] CPU P-States [ (12) 19 20 21 22 23 24 25 26 29 30 32 ] CPU P-States [ (12) 18 19 20 21 22 23 24 25 26 29 30 32 ] CPU P-States [ 12 18 19 20 21 22 23 24 25 26 (28) 29 30 32 ] CPU P-States [ (12) 16 18 19 20 21 22 23 24 25 26 28 29 30 32 ] CPU P-States [ 12 16 18 19 20 21 22 23 24 25 26 27 28 (29) 30 32 ] CPU P-States [ (12) 14 16 18 19 20 21 22 23 24 25 26 27 28 29 30 32 ] CPU P-States [ 12 14 16 17 18 19 20 21 22 23 24 25 26 27 28 29 (30) 32 ] CPU P-States [ (12) 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 ] CPU P-States [ (12) 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 ] bash-3.2# A few things to note here currently: 1. Under Enhanced Intel SpeedStep Technology.. : 1 (enabled). Intel SpeedStep is DISABLED in BIOS but it's showing as ENABLED in the script. I thought this didn't matter? I've tried it both ways. No matter what I do it shows enabled in the script. 2. Under MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2020202020202020 it's showing that at every C state my limit is 3200. Shouldn't some be lower? I thought they were before but I have no idea what changed. 3. I tried removing the kernel patch for Haswell-E, I can boot with or without it. WTF? 4. I do not have VoodooTSCSync or NullCPUPowerManagement installed 5. I enabled enhanced C1 state in BIOS. 6. I am running Sierra 10.12.2. I am not sure if the patches I'm using work on this version. Can anyone confirm? Here is my plist: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>ACPI</key> <dict> <key>DSDT</key> <dict> <key>Debug</key> <false/> <key>DropOEM_DSM</key> <true/> <key>Fixes</key> <dict> <key>AddDTGP_0001</key> <true/> <key>AddHDMI_8000000</key> <true/> <key>AddPNLF_1000000</key> <true/> <key>DeleteUnused_400000</key> <true/> <key>FIX_ACST_4000000</key> <true/> <key>FIX_ADP1_800000</key> <true/> <key>FIX_RTC_20000</key> <true/> <key>FIX_S3D_2000000</key> <true/> <key>FIX_TMR_40000</key> <true/> <key>FIX_WAK_200000</key> <true/> <key>FixDarwin_0002</key> <true/> <key>FixDisplay_0100</key> <true/> <key>FixFirewire_0800</key> <true/> <key>FixHDA_8000</key> <true/> <key>FixHPET_0010</key> <true/> <key>FixIPIC_0040</key> <true/> <key>FixLAN_2000</key> <true/> <key>FixRegions_10000000</key> <true/> <key>FixSBUS_0080</key> <true/> <key>FixShutdown_0004</key> <true/> <key>FixUSB_1000</key> <true/> <key>NewWay_80000000</key> <true/> </dict> <key>Name</key> <string>DSDT.aml</string> <key>Patches</key> <array> <dict> <key>Comment</key> <string>change EHC1 to EH01</string> <key>Disabled</key> <false/> <key>Find</key> <data> RUhDMQ== </data> <key>Replace</key> <data> RUgwMQ== </data> </dict> <dict> <key>Comment</key> <string>change EHC2 to EH02</string> <key>Disabled</key> <false/> <key>Find</key> <data> RUhDMg== </data> <key>Replace</key> <data> RUgwMg== </data> </dict> </array> <key>ReuseFFFF</key> <false/> </dict> <key>DropTables</key> <array> <dict> <key>Signature</key> <string>SSDT</string> <key>TableId</key> <string>PmMgt</string> </dict> </array> <key>HaltEnabler</key> <true/> <key>SSDT</key> <dict> <key>DropOem</key> <false/> <key>Generate</key> <false/> <key>PLimitDict</key> <string>0</string> <key>PluginType</key> <string>1</string> </dict> <key>SortedOrder</key> <array> <string>SSDT.aml</string> </array> <key>smartUPS</key> <true/> </dict> <key>Boot</key> <dict> <key>Arguments</key> <string>-xcpm darkwake=0 npci=0x3000 kext-dev-mode=1</string> <key>Debug</key> <false/> <key>DefaultLoader</key> <string>boot.efi</string> <key>DefaultVolume</key> <string>LastBootedVolume</string> <key>Legacy</key> <string>PBR</string> <key>Secure</key> <false/> <key>Timeout</key> <integer>5</integer> <key>XMPDetection</key> <false/> </dict> <key>CPU</key> <dict> <key>QPI</key> <integer>100</integer> <key>UseARTFrequency</key> <false/> </dict> <key>Devices</key> <dict> <key>Audio</key> <dict> <key>Inject</key> <string>1</string> <key>ResetHDA</key> <true/> </dict> <key>USB</key> <dict> <key>AddClockID</key> <true/> <key>FixOwnership</key> <true/> <key>Inject</key> <true/> </dict> </dict> <key>GUI</key> <dict> <key>Mouse</key> <dict> <key>DoubleClick</key> <integer>500</integer> <key>Enabled</key> <false/> <key>Mirror</key> <false/> <key>Speed</key> <integer>8</integer> </dict> <key>Scan</key> <true/> <key>ScreenResolution</key> <string>1920x1080</string> <key>Theme</key> <string>metal</string> </dict> <key>Graphics</key> <dict> <key>Inject</key> <false/> <key>NvidiaSingle</key> <false/> </dict> <key>KernelAndKextPatches</key> <dict> <key>AppleRTC</key> <true/> <key>AsusAICPUPM</key> <false/> <key>Debug</key> <false/> <key>DellSMBIOSPatch</key> <false/> <key>KernelCpu</key> <false/> <key>KernelHaswellE</key> <false/> <key>KernelLapic</key> <false/> <key>KernelPm</key> <false/> <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>xcpm_bootstrap Sierra © Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> g8PEg/si </data> <key>MatchOS</key> <string>10.12</string> <key>Replace</key> <data> g8PBg/si </data> </dict> <dict> <key>Comment</key> <string>xcpm_core_scope_msrs © Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> vgIAAAAx0uhs/P// </data> <key>MatchOS</key> <string>10.12</string> <key>Replace</key> <data> vgIAAAAx0pCQkJCQ </data> </dict> <dict> <key>Comment</key> <string>xcpm_idle patch by Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.12</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> <dict> <key>Comment</key> <string>xcpm_bootstrap Sierra © Pike R. Alpha</string> <key>Disabled</key> <true/> <key>Find</key> <data> g8PEg/si </data> <key>MatchOS</key> <string>10.12</string> <key>Replace</key> <data> g8O8g/si </data> </dict> <dict> <key>Comment</key> <string>Haswell-E CPUID Patch</string> <key>Disabled</key> <false/> <key>Find</key> <data> g8Dp </data> <key>MatchOS</key> <string>10.12</string> <key>Replace</key> <data> g8Dm </data> </dict> <dict> <key>Comment</key> <string>xcpm_pkg_scope_msr © Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> vgcAAAAx0uiU/P// </data> <key>MatchOS</key> <string>10.12</string> <key>Replace</key> <data> vgcAAAAx0pCQkJCQ </data> </dict> </array> <key>KextsToPatch</key> <array> <dict> <key>Comment</key> <string>X99 Patch by braumbear</string> <key>Disabled</key> <false/> <key>Find</key> <data> SIH7AAAAQA== </data> <key>MatchOS</key> <string>10.12</string> <key>Name</key> <string>IOPCIFamily</string> <key>Replace</key> <data> SIH7AAAAgA== </data> </dict> </array> </dict> <key>RtVariables</key> <dict> <key>BooterConfig</key> <string>0x28</string> <key>CsrActiveConfig</key> <string>0x67</string> <key>MLB</key> <string>C02032109R5DC771H</string> <key>ROM</key> <string>UseMacAddr0</string> </dict> <key>SMBIOS</key> <dict> <key>BiosReleaseDate</key> <string>06/12/13</string> <key>BiosVendor</key> <string>Apple Inc.</string> <key>BiosVersion</key> <string>MP61.88Z.0116.B04.1312061508</string> <key>Board-ID</key> <string>Mac-F60DEB81FF30ACF6</string> <key>BoardManufacturer</key> <string>Apple Inc.</string> <key>BoardType</key> <integer>11</integer> <key>ChassisAssetTag</key> <string>Pro-Enclosure</string> <key>ChassisManufacturer</key> <string>Apple Inc.</string> <key>ChassisType</key> <string>0x06</string> <key>Family</key> <string>Mac Pro</string> <key>LocationInChassis</key> <string>Part Component</string> <key>Manufacturer</key> <string>Apple Inc.</string> <key>ProductName</key> <string>MacPro6,1</string> <key>Trust</key> <false/> <key>Version</key> <string>1.0</string> </dict> <key>SystemParameters</key> <dict> <key>InjectKexts</key> <string>Yes</string> <key>InjectSystemID</key> <true/> <key>NvidiaWeb</key> <true/> </dict> </dict> </plist> 7. My MSR 0xE2 is locked. Does this matter?? 8. Here is my bizarre Power Gadget output. What's up with the wattage??? I also never go above 2.6GHz when I should be reaching 3.2Ghz. I just want turbo! Please help! Disabling Drop_OEM flag gives me this: AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved enableHWP................................: 0 Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 0 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0x1730a77087ef2 (16998 MHz) MWAIT C-States...........................: 8480 Processor Brandstring....................: Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz Processor Signature..................... : 0x306F2 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 2 - Model................................ : 0x3F (63) Model Specific Registers (MSRs) ------------------------------------------ MSR_CORE_THREAD_COUNT............(0x35) : 0xFFFFFF8070EDFA00 ------------------------------------------ - Core Count........................... : 8 - Thread Count......................... : 16 MSR_PLATFORM_INFO................(0xCE) : 0x80C33F3811800 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x18 (2400 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 1 (LPM supported) - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 12 - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x8400 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT) - CFG Lock............................. : 1 (MSR locked until next reset) - C3 State Auto Demotion............... : 0 (disabled/unsupported) - C1 State Auto Demotion............... : 0 (disabled/unsupported) - C3 State Undemotion.................. : 0 (disabled/unsupported) - C1 State Undemotion.................. : 0 (disabled/unsupported) - Package C-State Auto Demotion........ : 0 (disabled/unsupported) - Package C-State Undemotion........... : 0 (disabled/unsupported) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414 ------------------------------------------ - LVL_2 Base Address................... : 0x414 - C-state Range........................ : 1 (C6 is the max C-State to include) IA32_MPERF.......................(0xE7) : 0x1BEAA8B9A8 IA32_APERF.......................(0xE8) : 0x1D8B7D45CC MSR_FLEX_RATIO...................(0x194) : 0x0 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x1E5800001E00 ------------------------------------------ - Current Performance State Value...... : 0x1E00 (3000 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0x2000 ------------------------------------------ - Target performance State Value....... : 0x2000 (3200 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x88380000 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 0 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 56 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x570A00 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 87 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000 ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2020202020202020 ------------------------------------------ - Maximum Ratio Limit for C01.......... : 20 (3200 MHz) - Maximum Ratio Limit for C02.......... : 20 (3200 MHz) - Maximum Ratio Limit for C03.......... : 20 (3200 MHz) - Maximum Ratio Limit for C04.......... : 20 (3200 MHz) - Maximum Ratio Limit for C05.......... : 20 (3200 MHz) - Maximum Ratio Limit for C06.......... : 20 (3200 MHz) - Maximum Ratio Limit for C07.......... : 20 (3200 MHz) - Maximum Ratio Limit for C08.......... : 20 (3200 MHz) IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1 ------------------------------------------ - Power Policy Preference...............: 1 (highest performance) MSR_POWER_CTL....................(0x1FC) : 0x2904005B ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 1 (enabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x78330001582A8 ------------------------------------------ - Package Power Limit #1............... : 85 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1) - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds) - Package Power Limit #2............... : 102 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2) - Time Window for Power Limit #2....... : 3 (20 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x20714A ------------------------------------------ - Total Energy Consumed................ : 129 Joules (Watt = Joules / seconds) MSR_PKG_POWER_INFO...............(0x614) : 0x2F0550014002A8 ------------------------------------------ - Thermal Spec Power................... : 85 Watt - Minimum Power........................ : 0 - Maximum Power........................ : 170 - Maximum Time Window.................. : 0 MSR_PP0_POWER_LIMIT..............(0x638) : 0x0 MSR_PP0_ENERGY_STATUS............(0x639) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0 MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x18 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0xA00550001502A8 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0xA0055000000000 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC6_IRTL...................(0x60b) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0 IA32_TSC_DEADLINE................(0x6E0) : 0x1730A7A6AA3E2 CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz) Maximum non-Turbo Ratio/Frequency........: 24 (2400 MHz) Maximum Turbo Ratio/Frequency............: 32 (3200 MHz) P-State ratio * 100 = Frequency in MHz ------------------------------------------ CPU P-States [ (12) 24 29 ] CPU C6-Cores [ 0 3 4 6 8 10 12 14 ] CPU P-States [ (12) 18 24 29 ] CPU C6-Cores [ 0 2 3 4 5 6 8 10 12 14 15 ] CPU P-States [ (12) 17 18 24 29 ] CPU C6-Cores [ 0 1 2 3 4 5 6 8 10 12 13 14 15 ] CPU P-States [ (12) 17 18 19 24 29 ] CPU P-States [ (12) 17 18 19 22 24 29 ] CPU P-States [ 12 17 18 19 21 22 (24) 29 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 10 12 13 14 15 ] CPU P-States [ (12) 17 18 19 21 22 24 25 29 ] CPU P-States [ (12) 17 18 19 21 22 23 24 25 29 ] CPU P-States [ (12) 17 18 19 20 21 22 23 24 25 29 ] CPU P-States [ 12 17 18 19 20 21 22 23 24 25 29 (32) ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 12 13 14 15 ] CPU P-States [ 12 17 18 19 20 21 22 23 24 25 28 29 (30) 32 ] CPU P-States [ (12) 16 17 18 19 20 21 22 23 24 25 28 29 30 32 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] CPU P-States [ (12) 16 17 18 19 20 21 22 23 24 25 27 28 29 30 32 ] CPU P-States [ 12 16 17 18 19 20 21 22 23 24 25 (26) 27 28 29 30 32 ] CPU P-States [ (12) 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 ] bash-3.2#
  13. r2tincan

    FakeCPUID, XCPM and generating ssdt.aml

    Looks like the states are showing up but I am not getting turbo speeds.
  14. r2tincan

    FakeCPUID, XCPM and generating ssdt.aml

    Is this still an issue with Haswell-E chips? I have Xeon E5-2630v3 and I'm having tons of problems getting XCPM to work. To my knowledge I'm using all the pike patches in clover for Haswell-E and have the xcpm bootflag enabled and did freq vectors for a 14,2 (I believe.) This is my kext output: AppleIntelInfo.kext v2.0 Copyright © 2012-2016 Pike R. Alpha. All rights reserved enableHWP................................: 0 Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 0 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0x2f863eba990 (136 MHz) MWAIT C-States...........................: 8480 Processor Brandstring....................: Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz Processor Signature..................... : 0x306F2 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 2 - Model................................ : 0x3F (63) Model Specific Registers (MSRs) ------------------------------------------ MSR_CORE_THREAD_COUNT............(0x35) : 0xFFFFFF806BBFC400 ------------------------------------------ - Core Count........................... : 8 - Thread Count......................... : 16 MSR_PLATFORM_INFO................(0xCE) : 0x80C33F3811800 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x18 (2400 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 1 (LPM supported) - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 12 - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x8400 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT) - CFG Lock............................. : 1 (MSR locked until next reset) - C3 State Auto Demotion............... : 0 (disabled/unsupported) - C1 State Auto Demotion............... : 0 (disabled/unsupported) - C3 State Undemotion.................. : 0 (disabled/unsupported) - C1 State Undemotion.................. : 0 (disabled/unsupported) - Package C-State Auto Demotion........ : 0 (disabled/unsupported) - Package C-State Undemotion........... : 0 (disabled/unsupported) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414 ------------------------------------------ - LVL_2 Base Address................... : 0x414 - C-state Range........................ : 1 (C6 is the max C-State to include) IA32_MPERF.......................(0xE7) : 0x94290EC077 IA32_APERF.......................(0xE8) : 0x3C757B3C6E MSR_FLEX_RATIO...................(0x194) : 0x0 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x1A7700001800 ------------------------------------------ - Current Performance State Value...... : 0x1800 (2400 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0xC00 ------------------------------------------ - Target performance State Value....... : 0xC00 (1200 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x88350000 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 0 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 53 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x570A00 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 87 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000 ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x1A1A1B1C1D1E2020 ------------------------------------------ - Maximum Ratio Limit for C01.......... : 20 (3200 MHz) - Maximum Ratio Limit for C02.......... : 20 (3200 MHz) - Maximum Ratio Limit for C03.......... : 1E (3000 MHz) - Maximum Ratio Limit for C04.......... : 1D (2900 MHz) - Maximum Ratio Limit for C05.......... : 1C (2800 MHz) - Maximum Ratio Limit for C06.......... : 1B (2700 MHz) - Maximum Ratio Limit for C07.......... : 1A (2600 MHz) - Maximum Ratio Limit for C08.......... : 1A (2600 MHz) IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1 ------------------------------------------ - Power Policy Preference...............: 1 (highest performance) MSR_POWER_CTL....................(0x1FC) : 0x2904005B ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 1 (enabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x78330001582A8 ------------------------------------------ - Package Power Limit #1............... : 85 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1) - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds) - Package Power Limit #2............... : 102 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2) - Time Window for Power Limit #2....... : 3 (20 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x15972FCE ------------------------------------------ - Total Energy Consumed................ : 22108 Joules (Watt = Joules / seconds) MSR_PKG_POWER_INFO...............(0x614) : 0x2F0550014002A8 ------------------------------------------ - Thermal Spec Power................... : 85 Watt - Minimum Power........................ : 0 - Maximum Power........................ : 170 - Maximum Time Window.................. : 0 MSR_PP0_POWER_LIMIT..............(0x638) : 0x0 MSR_PP0_ENERGY_STATUS............(0x639) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64C) : 0x0 MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x18 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0xA00550001502A8 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0xA0055000000000 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC6_IRTL...................(0x60b) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0 IA32_TSC_DEADLINE................(0x6E0) : 0x2F867CA02C8 CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz) Maximum non-Turbo Ratio/Frequency........: 24 (2400 MHz) Maximum Turbo Ratio/Frequency............: 32 (3200 MHz) P-State ratio * 100 = Frequency in MHz ------------------------------------------ CPU P-States [ (12) 23 ] CPU C6-Cores [ 0 2 4 6 8 10 12 14 ] CPU P-States [ (12) 16 23 ] CPU C6-Cores [ 0 2 3 4 6 8 9 10 12 14 15 ] CPU P-States [ (12) 16 18 23 ] CPU C6-Cores [ 0 1 2 3 4 6 7 8 9 10 12 14 15 ] CPU P-States [ (12) 16 17 18 23 ] CPU C6-Cores [ 0 1 2 3 4 6 7 8 9 10 12 13 14 15 ] CPU P-States [ 12 16 17 18 19 23 (24) ] CPU P-States [ (12) 16 17 18 19 20 23 24 ] CPU C6-Cores [ 0 1 2 3 4 6 7 8 9 10 11 12 13 14 15 ] CPU P-States [ (12) 16 17 18 19 20 22 23 24 ] CPU P-States [ (12) 14 16 17 18 19 20 22 23 24 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ] CPU P-States [ (12) 14 16 17 18 19 20 21 22 23 24 ] CPU P-States [ (12) 14 15 16 17 18 19 20 21 22 23 24 ] CPU P-States [ 12 14 15 16 17 18 19 20 21 22 23 24 (32) ] any ideas what could be wrong, anyone? 10.12.2. Thanks
×