Register now to gain access to all of our features. Once registered and logged in, you will be able to contribute to this site by submitting your own content or replying to existing content. You'll be able to customize your profile, receive reputation points as a reward for submitting content, while also communicating with other members via your own private inbox, plus much more! This message will be removed once you have signed in.
Ca veut dire que tu dois taper: sudo rm /System/Library/Extensions.* sudo = super utilisateur exécute (do =faire) si tu le fais sans sudo, tu as des messages d'erreurs: tu n'as pas les autorisations. Ton pb vient peut être du fait que tu suis les instructions sans bien comprendre ce qu'elles veulent dire. Id did everything mentionned above. i'm running 10.4.6 and my ethernet adaptor is red (cable not connected) instead of green. As this cable runs pretty well under Linux on same board, My Dev is 27DC an Ven is 8086 so I wrote <string>0x27DC8086 0x10508086 0x10298086 0x10308086&0xfff0ffff 0x12098086 0x12278086 0x12288086 0x12298086 0x24498086 0x24598086 0x245d8086 0x10918086 0x10608086&0xfff0ffff</string> I also trried <string>0x27DC8086 0x10508086 0x10298086 0x10308086&0xffffffff 0x12098086 0x12278086 0x12288086 0x12298086 0x24498086 0x24598086 0x245d8086 0x10918086 0x10608086&0xfff0ffff</string> but it always says "cable not connected" I cleared kext cache and did Open DiskUtility, and performed permission repair. Have you any idea ? Firewire connection is working so I can share folders, but I cannot browse the internet.