Jump to content

appunu

Members
  • Content Count

    32
  • Joined

  • Last visited

About appunu

  • Rank
    InsanelyMac Protégé

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hey! First up: Thanks for building this X99 Guide. My System(Mojave) was running like charm with everything working from the beginning! (Rampage 5 extreme; 6850k, Vega 64). I just received my Fenvi T919 WiFi/BT Card that should be fully functional OOB. I installed the card, booted the system Up and experiencing PCI Configuration end + a prohibited sign and when i use USB injectall + disabling the 4g encoding it proceeds till USB sound assertion and gets stuck there + prohibited sign. . The BIOS settings are the same as you pointed in the guide. Things I tried : Removed the card which lets me boot normally. Once booted i plug in the fenvi card while the system is running and I can see the adapter getting recognized. The system is not booting only when the adapter is installed during the boot phase. Tried Enabling/Disabling FixAirport, FixLan which doesn't seem to help. Switched different PCI lanes and doesn't seem to help. CLOVER.zip
  2. Hi All, To make my Hack support bluetooth and wifi natively I purchased this card OSXWIFI CARD. I have a rampage 5 extreme and I tried installing the card in the PCIE_X1_1 slot as in the diagram below. https://ibb.co/7pNwP2f When I boot the hack, I get stuck in the following screen followed by Stop sign with scrambled text. https://ibb.co/w6vqnzs Any help here is highly appreciated. Specs: Asus Rampage V Extreme V1 Patched Bios 3104 | Core i7-5820k @ 3.3ghz | Nvidia GTX 970 | G.Skill 16GB DDR4 | Samsung 840 Pro 256GB | Sandisk 128GB x 2 | UEFI Clover r5.0.0.0 running Sierra 10.13.6 config.plist
  3. Hi Nmano, Thanks for sharing all your X99 build details. I am running Rampage V extreme and 5820K and have few questions as below. Should I apply all the SSDT patches as you shared above ? Also not much details are there as part of the SSDTs to test one by one to see if they are work properly. Will you be able to help telling me what each one does if you have some time to spare The kext and kernel patches you shared has both 10.13.X and 10.14.X. I hope I should use the ones that are listed under 10.14.X and can you confirm ?
  4. I have a three SSD's. 1 - WIndows 2 - Fully working Sierra Installation 3 - Test Sierra Installation On 2 and 3 I have clover installed on their EFI. My boot disk is 2 and on the clover GUI the config file from 2 is loaded as it has to be. When I boot 3 clover considers config from 2 and load the kexts from 2. I would like to know how I can split their configs and load appropriate config/kexts from EFI for 3 ? Thanks
  5. Thans a lot mald0n. darkwake=1 works fine for now. I put the system to sleep and after three hours seems like working good. If something happens I will try out the solution suggested by tikizonda94.
  6. Please find my files. My configuration is in my signature. My build restarts when it goes to sleep. Any specific BIOS setting I need to do ? CLOVER.zip Send me appunu’s iMac.zip appunu’s iMac.zip
  7. Mald0n patched my BIOS. I did a fresh installation and used the clover folder from this thread. C3 states are still not generated. How does the output look ? Also the machine restarts after coming from sleep. Since MST unlocked do i need to use XPCM patches ? Can you please point me how I can configure to boot two different Hackintosh installations with their individual EFI folders. SSD 1 - Hackintosh 10.12 - EFI folder SSD 2 - Hackintosh 10.12 - EFI folder CLOVER.zip
  8. Any idea how I patch the bios ?. I tried UEFITool to patch it but it didn't work. https://github.com/LongSoft/UEFITool/issues/74 Any alternatives ?
  9. bash-3.2# kextload ~/Desktop/AppleIntelInfo.kext bash-3.2# cat /tmp/AppleIntelInfo.dat AppleIntelInfo.kext v2.5 Copyright © 2012-2017 Pike R. Alpha. All rights reserved. Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 0 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0x870f79189d4 (281 MHz) MWAIT C-States...........................: 8480 Processor Brandstring....................: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz Processor Signature..................... : 0x306F2 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 2 - Model................................ : 0x3F (63) Model Specific Registers (MSRs) ------------------------------------------ MSR_CORE_THREAD_COUNT............(0x35) : 0xFFFFFF80397D9300 ------------------------------------------ - Core Count........................... : 6 - Thread Count......................... : 12 MSR_PLATFORM_INFO................(0xCE) : 0x80C3BF3812100 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x21 (3300 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 1 (LPM supported) - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 12 - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x8400 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT) - CFG Lock............................. : 1 (MSR locked until next reset) - C3 State Auto Demotion............... : 0 (disabled/unsupported) - C1 State Auto Demotion............... : 0 (disabled/unsupported) - C3 State Undemotion.................. : 0 (disabled/unsupported) - C1 State Undemotion.................. : 0 (disabled/unsupported) - Package C-State Auto Demotion........ : 0 (disabled/unsupported) - Package C-State Undemotion........... : 0 (disabled/unsupported) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414 ------------------------------------------ - LVL_2 Base Address................... : 0x414 - C-state Range........................ : 1 (C6 is the max C-State to include) IA32_MPERF.......................(0xE7) : 0x1BF83BE225 IA32_APERF.......................(0xE8) : 0x1952F96D14 MSR_FLEX_RATIO...................(0x194) : 0xE0000 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x1A2700000C00 ------------------------------------------ - Current Performance State Value...... : 0xC00 (1200 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0xFF00 ------------------------------------------ - Target performance State Value....... : 0xFF00 (25500 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x884C0000 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 0 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 76 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x690A00 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 105 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000 ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2222242424242424 ------------------------------------------ - Maximum Ratio Limit for C01.......... : 24 (3600 MHz) - Maximum Ratio Limit for C02.......... : 24 (3600 MHz) - Maximum Ratio Limit for C03.......... : 24 (3600 MHz) - Maximum Ratio Limit for C04.......... : 24 (3600 MHz) - Maximum Ratio Limit for C05.......... : 24 (3600 MHz) - Maximum Ratio Limit for C06.......... : 24 (3600 MHz) IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x5 ------------------------------------------ - Power Policy Preference...............: 5 (balanced performance and energy saving) MSR_POWER_CTL....................(0x1FC) : 0x2B04005B ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 1 (enabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF80015FFF8 ------------------------------------------ - Package Power Limit #1............... : 4095 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1) - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds) - Package Power Limit #2............... : 4095 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2) - Time Window for Power Limit #2....... : 3 (20 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x21DA5E4 ------------------------------------------ - Total Energy Consumed................ : 2166 Joules (Watt = Joules / seconds) MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x21 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0xBC0000001E0460 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0xBC000000000000 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC3_IRTL...................(0x60a) : 0x0 MSR_PKGC6_IRTL...................(0x60b) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0 IA32_TSC_DEADLINE................(0x6E0) : 0x871232942B5 CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz) Maximum non-Turbo Ratio/Frequency........: 33 (3300 MHz) Maximum Turbo Ratio/Frequency............: 36 (3600 MHz) P-State ratio * 100 = Frequency in MHz ------------------------------------------ CPU P-States [ (12) 30 36 ] CPU C6-Cores [ 1 2 5 6 8 11 ] CPU P-States [ (12) 29 30 36 ] CPU C6-Cores [ 0 1 2 4 5 6 8 10 11 ] CPU P-States [ 12 26 29 30 (36) ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ] CPU P-States [ (12) 26 28 29 30 36 ] CPU P-States [ (12) 20 26 28 29 30 36 ] CPU P-States [ (12) 20 25 26 28 29 30 36 ] CPU P-States [ 12 20 25 26 28 29 30 32 (36) ] CPU P-States [ (12) 20 23 25 26 28 29 30 32 36 ] CPU P-States [ 12 20 22 23 25 26 28 29 30 32 (36) ] CPU P-States [ 12 20 22 23 24 25 26 28 29 30 32 (36) ] CPU P-States [ (12) 20 22 23 24 25 26 27 28 29 30 32 36 ] CPU P-States [ (12) 20 22 23 24 25 26 27 28 29 30 32 33 36 ] CPU P-States [ (12) 20 22 23 24 25 26 27 28 29 30 32 33 34 36 ] CPU P-States [ (12) 20 21 22 23 24 25 26 27 28 29 30 32 33 34 36 ] CPU P-States [ (12) 15 20 21 22 23 24 25 26 27 28 29 30 32 33 34 36 ] CPU P-States [ 12 15 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 (36) ] CPU P-States [ 12 15 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 (36) ] CPU P-States [ 12 15 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 (36) ] Asus Rampage V Extreme V1 | Core i7-5820k - YES Using MacPro 6,1 SSDT with Pike's script chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh ~/Library/ssdtPRGen/ There were two SSDT.aml inside one on root folder and other on ~/Library/ssdtPRGen/ACPI/ copied ssdt.aml from the root folder to EFI/CLOVER/ACPI/Patched. need generate c3 - I Tried generate C states from clover but that didn't work. Can you explain how to enable it ? Removed VoodooTSCSync.kext Use only one folder kexts in Clover, or 10.12 or Other - Removed from 10.12 and moved to Other. Package Power Limit #1............... : 4095 Watt - Is it a problem ? I see from some thread its too high. CLOVER.zip
  10. Thanks mald0n, kernelpm did the magic. I am able to boot now. Please find the new ioReg and the boot log AppleIntelInfo.kext v2.5 Copyright © 2012-2017 Pike R. Alpha. All rights reserved. Settings: ------------------------------------------ logMSRs..................................: 1 logIGPU..................................: 0 logCStates...............................: 1 logIPGStyle..............................: 1 InitialTSC...............................: 0x3840bddc99b (117 MHz) MWAIT C-States...........................: 8480 Processor Brandstring....................: Intel® Core i7-5820K CPU @ 3.30GHz Processor Signature..................... : 0x306F2 ------------------------------------------ - Family............................... : 6 - Stepping............................. : 2 - Model................................ : 0x3F (63) Model Specific Registers (MSRs) ------------------------------------------ MSR_CORE_THREAD_COUNT............(0x35) : 0xFFFFFF8040121100 ------------------------------------------ - Core Count........................... : 6 - Thread Count......................... : 12 MSR_PLATFORM_INFO................(0xCE) : 0x80C3BF3812100 ------------------------------------------ - Maximum Non-Turbo Ratio.............. : 0x21 (3300 MHz) - Ratio Limit for Turbo Mode........... : 1 (programmable) - TDP Limit for Turbo Mode............. : 1 (programmable) - Low Power Mode Support............... : 1 (LPM supported) - Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available) - Maximum Efficiency Ratio............. : 12 - Minimum Operating Ratio.............. : 8 MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x8400 ------------------------------------------ - I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT) - CFG Lock............................. : 1 (MSR locked until next reset) - C3 State Auto Demotion............... : 0 (disabled/unsupported) - C1 State Auto Demotion............... : 0 (disabled/unsupported) - C3 State Undemotion.................. : 0 (disabled/unsupported) - C1 State Undemotion.................. : 0 (disabled/unsupported) - Package C-State Auto Demotion........ : 0 (disabled/unsupported) - Package C-State Undemotion........... : 0 (disabled/unsupported) MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x10414 ------------------------------------------ - LVL_2 Base Address................... : 0x414 - C-state Range........................ : 1 (C6 is the max C-State to include) IA32_MPERF.......................(0xE7) : 0x34D4C19D8A IA32_APERF.......................(0xE8) : 0x30541805B0 MSR_FLEX_RATIO...................(0x194) : 0xE0000 ------------------------------------------ MSR_IA32_PERF_STATUS.............(0x198) : 0x1A4F00000C00 ------------------------------------------ - Current Performance State Value...... : 0xC00 (1200 MHz) MSR_IA32_PERF_CONTROL............(0x199) : 0xFF00 ------------------------------------------ - Target performance State Value....... : 0xFF00 (25500 MHz) - Intel Dynamic Acceleration........... : 0 (IDA engaged) IA32_CLOCK_MODULATION............(0x19A) : 0x0 IA32_THERM_INTERRUPT.............(0x19B) : 0x0 IA32_THERM_STATUS................(0x19C) : 0x884D0000 ------------------------------------------ - Thermal Status....................... : 0 - Thermal Log.......................... : 0 - PROCHOT # or FORCEPR# event.......... : 0 - PROCHOT # or FORCEPR# log............ : 0 - Critical Temperature Status.......... : 0 - Critical Temperature log............. : 0 - Thermal Threshold #1 Status.......... : 0 - Thermal Threshold #1 log............. : 0 - Thermal Threshold #2 Status.......... : 0 - Thermal Threshold #2 log............. : 0 - Power Limitation Status.............. : 0 - Power Limitation log................. : 0 - Current Limit Status................. : 0 - Current Limit log.................... : 0 - Cross Domain Limit Status............ : 0 - Cross Domain Limit log............... : 0 - Digital Readout...................... : 77 - Resolution in Degrees Celsius........ : 1 - Reading Valid........................ : 1 (valid) MSR_THERM2_CTL...................(0x19D) : 0x0 IA32_MISC_ENABLES................(0x1A0) : 0x850089 ------------------------------------------ - Fast-Strings......................... : 1 (enabled) - FOPCODE compatibility mode Enable.... : 0 - Automatic Thermal Control Circuit.... : 1 (enabled) - Split-lock Disable................... : 0 - Performance Monitoring............... : 1 (available) - Bus Lock On Cache Line Splits Disable : 0 - Hardware prefetch Disable............ : 0 - Processor Event Based Sampling....... : 0 (PEBS supported) - GV1/2 legacy Enable.................. : 0 - Enhanced Intel SpeedStep Technology.. : 1 (enabled) - MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported) - Adjacent sector prefetch Disable..... : 0 - CFG Lock............................. : 0 (MSR not locked) - xTPR Message Disable................. : 1 (disabled) MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x690A00 ------------------------------------------ - Turbo Attenuation Units.............. : 0 - Temperature Target................... : 105 - TCC Activation Offset................ : 0 MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000 ------------------------------------------ - EIST Hardware Coordination........... : 0 (hardware coordination enabled) - Energy/Performance Bias support...... : 1 - Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software) - Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores) MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2222242424242424 ------------------------------------------ - Maximum Ratio Limit for C01.......... : 24 (3600 MHz) - Maximum Ratio Limit for C02.......... : 24 (3600 MHz) - Maximum Ratio Limit for C03.......... : 24 (3600 MHz) - Maximum Ratio Limit for C04.......... : 24 (3600 MHz) - Maximum Ratio Limit for C05.......... : 24 (3600 MHz) - Maximum Ratio Limit for C06.......... : 24 (3600 MHz) IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1 ------------------------------------------ - Power Policy Preference...............: 1 (highest performance) MSR_POWER_CTL....................(0x1FC) : 0x2B04005B ------------------------------------------ - Bi-Directional Processor Hot..........: 1 (enabled) - C1E Enable............................: 1 (enabled) MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03 ------------------------------------------ - Power Units.......................... : 3 (1/8 Watt) - Energy Status Units.................. : 14 (61 micro-Joules) - Time Units .......................... : 10 (976.6 micro-Seconds) MSR_PKG_POWER_LIMIT..............(0x610) : 0x7FFF80015FFF8 ------------------------------------------ - Package Power Limit #1............... : 4095 Watt - Enable Power Limit #1................ : 1 (enabled) - Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1) - Time Window for Power Limit #1....... : 10 (2560 milli-Seconds) - Package Power Limit #2............... : 4095 Watt - Enable Power Limit #2................ : 1 (enabled) - Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2) - Time Window for Power Limit #2....... : 3 (20 milli-Seconds) - Lock................................. : 0 (MSR not locked) MSR_PKG_ENERGY_STATUS............(0x611) : 0x7339EC6 ------------------------------------------ - Total Energy Consumed................ : 7374 Joules (Watt = Joules / seconds) MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x21 MSR_CONFIG_TDP_LEVEL1............(0x649) : 0xBC0000001E0460 MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0xBC000000000000 MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0 MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0 MSR_PKGC3_IRTL...................(0x60a) : 0x0 MSR_PKGC6_IRTL...................(0x60b) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0 MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0 MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0 MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0 IA32_TSC_DEADLINE................(0x6E0) : 0x38439D65092 CPU Ratio Info: ------------------------------------------ Base Clock Frequency (BLCK)............. : 100 MHz Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz) Maximum non-Turbo Ratio/Frequency........: 33 (3300 MHz) Maximum Turbo Ratio/Frequency............: 36 (3600 MHz) P-State ratio * 100 = Frequency in MHz ------------------------------------------ CPU P-States [ 12 30 (36) ] CPU C6-Cores [ 1 3 5 7 9 11 ] CPU P-States [ (12) 30 32 36 ] CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ] CPU P-States [ 12 27 30 32 (36) ] CPU P-States [ (12) 27 30 31 32 36 ] CPU P-States [ (12) 27 29 30 31 32 36 ] CPU P-States [ (12) 27 28 29 30 31 32 36 ] CPU P-States [ (12) 27 28 29 30 31 32 34 36 ] CPU P-States [ 12 19 27 28 29 30 31 32 34 (36) ] CPU P-States [ (12) 18 19 27 28 29 30 31 32 34 36 ] CPU P-States [ (12) 18 19 26 27 28 29 30 31 32 34 36 ] CPU P-States [ 12 18 19 26 27 28 29 30 31 32 33 34 (36) ] CPU P-States [ 12 18 19 24 26 27 28 29 30 31 32 33 34 (36) ] CPU P-States [ 12 18 19 24 26 27 28 29 30 31 32 33 34 35 (36) ] CPU P-States [ 12 18 19 24 25 26 27 28 29 30 31 32 33 34 35 (36) ] CPU P-States [ (12) 18 19 21 24 25 26 27 28 29 30 31 32 33 34 35 36 ] CPU P-States [ 12 16 18 19 21 24 25 26 27 28 29 30 31 32 33 34 35 (36) ] CPU P-States [ (12) 16 18 19 21 23 24 25 26 27 28 29 30 31 32 33 34 35 36 ] CPU P-States [ (12) 16 17 18 19 21 23 24 25 26 27 28 29 30 31 32 33 34 35 36 ] curFew’s MacBook Air V3.zip Bootlog.rtf
  11. Took out the other SSD and loaded the OS from new installation. I get stuck here for a long time and nothing happens really.
  12. So that means I can't have two different Hackintosh installations in separate SSD's with different EFI folders ?
  13. Please find the speed step data and the new ioReg output. The one weird thing I see from boot log, even though I removed voodooHDA from my clover and added your clover kexts, since my other SSD is the primary boot device all the kexts from the other SSD is loading instead of new ones. Any idea why ? curFew’s MacBook Air - v2.zip
  14. Please find the attached OEM DSDT. origin.zip
  15. Please find the attached files. Thanks I missed one of these files. Please find the attached iOReg Dump CLOVER.zip Send me curFew’s MacBook Air.zip curFew’s MacBook Air.zip
×