Jump to content

rojaro

Members
  • Content count

    6
  • Joined

  • Last visited

About rojaro

  • Rank
    InsanelyMac Protégé
  1. Thanks a lot Now i just need a new AppleHDA.kext ...
  2. Hi, in the past few days, i've tried to get my old color laser printer running. First i installed the driver package, which i have been using already with the old leopard, just to find out that it would not work as the included foomatic-rip version wasnt up to date for snow leopard. Luckily, foomatic-rip has been updated and therefore i decided to compile it myself. I removed the old foomatic-rip and it's dependencies (namely Ghostscript 8.64). Then i installed Ghostscript 8.70 and compiled the latest foomatic-rip. But now i get the following error: Dyld Error Message: Library not loaded: ./bin/../sobin/libgs.8.64.dylib Referenced from: /usr/libexec/cups/filter/foomatic-rip Reason: image not found And there is the problem, as the new foomatic-rip binary is not even linked against libgs.8.64 but libgs.8.70: McPork:bin rojaro$ otool -L /usr/libexec/cups/filter/foomatic-rip /usr/libexec/cups/filter/foomatic-rip: /opt/local/lib/libgs.8.70.dylib (compatibility version 0.0.0, current version 0.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 124.1.1) McPork:bin rojaro$ Therefore the question, why does OS X tell me that the binary is still linked against ghostscript 8.64? I though about the DYLD Shared Cache which i've updated using "update_dyld_shared_cache -root / -force -verify", but that did not help at all. Has anyone an idea what could be the problem or how to fix this? Greets - rojaro -
  3. well, the fastest speed i got so far were 544kb/s while copying a file from another machine in the local network ... what type of ethernet controller do you have dr.vox?
  4. Just noticed that Guijin Ding - the author of this driver - has posted the source code to goole. -> http://code.google.com/p/82566mm-osx-driver/
  5. Hi folks, i'm having dificulties getting my onboard 82562V-2 ethernet controller running at something else than 10Mbit. I tried to configure the network interface manually using the media parameter of ifconfig, but that didnt help either and even though osx reports that it is running at 100Mbit, the router and the transfer speeds say the connection is running at just 10Mbit. en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::21d:92ff:fe71:44ae%en0 prefixlen 64 scopeid 0x4 inet 192.168.2.109 netmask 0xffffff00 broadcast 192.168.2.255 ether 00:1d:92:71:44:ae media: 100baseTX <full-duplex> status: active supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 100baseTX <half-duplex> 100baseTX <full-duplex> 1000baseT <full-duplex> The motherboard sports an ICH9 chipset and the following is the the output of "lspci -v" regarding the ethernet controller. 00:19.0 Ethernet controller: Intel Corporation 82562V-2 10/100 Network Connection (rev 02) Subsystem: Micro-Star International Co., Ltd. Unknown device 502c Flags: bus master, fast devsel, latency 0, IRQ 20 Memory at fdfc0000 (32-bit, non-prefetchable) Memory at fdfff000 (32-bit, non-prefetchable) I/O ports at ff00 [disabled] Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [e0] Vendor Specific Information <?> Please help me with this if you can. If you need any more information, please tell me. I'll try to do my best to provide you with all the details you need. - rojaro -
  6. I also have this problem ... although i configured the network interface to use 100Mbit full duplex and OS X actually reports the interface as 100Mbit full duplex, i'll just get a 10Mbit connection anyway.
×