Jump to content

kavalir

Members
  • Content count

    13
  • Joined

  • Last visited

About kavalir

  • Rank
    InsanelyMac Protégé
  1. EFI GFX String Installer [Beta]

    Hello DevZero, lucky to see you back .. hope your cybernetic leg will help you with creating efi installer;).. btw I have still no luck with ATI 3650 512mb, tried almost everything, still no work. Should I wait for your installer, or buy Nvidia ? .. I need 3 LCDs, and it seems lot of people successfully set up two NV cards with EFI strings..
  2. Ati shappire hd 3650 256Mb

    Hi, try to install new Kalyway 10.5.2 + lastExile drivers .. it works for me with 3650
  3. ATI Radeon 3650HD on 3 or 4 LCDs

    Are you sure? What is the reason? .. There is no one with working 2 ATI cards? BTW if there is no way to make two ATI's to work, what Nvidia to buy? I need 3 LCDs on two cards. So I have to buy another two cards?( 55 EUR Gigabyte GeForce 8600GT (540MHz) 256MB DDR3 (1400MHz) Passive 73 EUR Gigabyte GeForce 8600GTS (675MHz) 256MB DDR3 (2000MHz) Passive 91 EUR Gigabyte GeForce 9600GSO (550MHz) 384MB DDR3 (1800MHz) 101EUR Asus GeForce 8800GS (550MHz) 384MB DDR3 (1600MHz) 109EUR MSI GeForce 8800GTS (575MHz) 320 MB DDR3 (1700MHz) 115EUR Gigabyte GeForce 9600GT (650MHz) 512MB DDR3 (1800MHz) Passive 132EUR Gigabyte GeForce 8800GT (700MHz) 512MB DDR3 (1840MHz) Any advices? ...
  4. ATI Radeon 3650HD on 3 or 4 LCDs

    Hello, ATI 3650 512mb is working under 10.5.2 and 10.5.3 with 2 LCDs great with lastExile drivers. But what for TWO identical cards and 3 or 4 LCDs? Is there any chance to make it work without setting up EFI GFX strings? I have same ATI 3650's. Both of them are correctly listed in system profiler, bud working is only one card. If I set up PCI or PEG option in BIOS, first card is working. If I set up PEG2, second card is working. So I know both cards works. So what to do now, to make both ATIs to work seamlessly? I'm unable to set up EFI strings, I tried almost every possible option from all guides, but with no luck. With EFI GFX strings is working always only one card and only with mirroring displays. Here is my System profiler with lastExile driver > Here is my in.plist for EFI GFX strings for ATI 3650HD 512mb > (not properly working - note that first slot "0x1" and second slot "0x1c" are correct)
  5. ATI Radeon HD pkg installers 10.5.x & 10.6

    Hello, ATI 3650 512mb is working under 10.5.2 and 10.5.3 with 2 LCDs great with lastExile drivers. But what for TWO identical cards and 3 or 4 LCDs? Is there any chance to make it work without setting up EFI GFX strings? I have same ATI 3650's. Both of them are correctly listed in system profiler, bud working is only one card. If I set up PCI or PEG option in BIOS, firs card is working. If I set up PEG2, second card is working. So I know everything is on good way. So what to do now, to make both cards to work seamlessly? I'm unable to set up EFI strings, I tried almost every possible option from all guides, but with no luck. With EFI GFX strings is working always only one card and only with mirroring displays. Here is my System profiler with lastExile driver > Here is my in.plist for EFI GFX strings for ATI 3650HD 512mb > (not properly working - note that first slot "0x1" and second slot "0x1c" are correct)
  6. hello, thanks for the reply yes, 0x1c looks little bit weird;) but it is what gfxutil said. i tried both cards in both slots separately (one in first PCIE, and one is second PCIE). but problem I have is before this step - if I just leave only one ATI card in computer, delete natit.kext and then reboot (original boot plist). it is not possible to login to system, because after grey apple (correctly shown), login screen is messed up.
  7. Hello, I have two same cards Sapphire ATI HD 3650 512mb. ... I want to have working GFX string because I like to have picture on 3 same monitors. Two lcds on one card working flawlessly with ATI installer from lastExile ( http://forum.insanelymac.com/index.php?showtopic=107526 ).. When I put second ATI to my second PCIE slot, system profiler will show the card correctly! Everything looks fine, but it is not working When I switch in bios to PEG2, everything is working too, but on the second card in second slot (logically). So the system see booth cards correctly. Problem is that I cannot try GFX strings, because, after deleting Natit.kext, I didn't get low resolution (as described in aquamac how to http://aquamac.proboards106.com/index.cgi?...=569&page=1 ) - but I get screwed picture, so screen is unusable. System boots up correctly, everything is working, but picture in login screen is screwed;( All I can do is boot with -x set up boot plist file with hex string, but after reboot is picture same like with original boot plist. So any advices? ... I made manually, boot plist - setting up plist file and generating hex with gfxutil (paste into boot plist) My plist look like this
  8. EFI GFX String Installer [Beta]

    Hello, I have Sapphire ATI HD 3650 512mb, there is attached my ioreg.txt ... I want to have working GFX string because I have exactly same two 3650 cards, which I like to have on 3 same monitors. Two lcds on one card working flawlessly with ATI installer from lastExile ( http://forum.insanelymac.com/index.php?showtopic=107526 ).. But when I tried it manually, no luck;( .. After setting up plist file and generating hex with gfxutil (paste into boot plist) and deleting Natit.kext, I get unusable screen - weird picture. System boots up correctly, everything is working, but picture in login screen is screwed;( My plist look like this ioreg.txt
  9. ATI Radeon HD pkg installers 10.5.x & 10.6

    Hello! Some users of HD3650 encounters same problem with the white menus. You probably found the solution.. Please could you exactly explain, what to do with Pacifist, which files to extract .. etc. Just all steps. Thank you..
  10. Dual Card/Triple Monitor, 8800GS+8400GS, WORKING!

    Hello, good work! At the moment I have ATI 3650 on two 22" lcd screens, but I still have third 22" here unconnected. What do you think I should do at the moment? Buy the same one 3650? These two screens works flawlessly, but I'm not sure what happens when I will connect second same graphic card.. By the way, I don't want to make whole reinstall, it is many hours of installing all stuff, so I need some elegant way to try it;) Thanks for advice.
  11. ATI Radeon HD pkg installers 10.5.x & 10.6

    Hello.. It worked for you? I'm not sure, if I'm able to make whole reinstall;) .. any way to 'roll back', update, and then drivers ?
  12. Hello, after many hours I'm unable to make my ASUS WL-138gV2 wifi card (with Broadcom 4318 chip) fully working. I have done many fresh installs (kalyway, iatkos, leo4all - 10.5.2, and with 10.5.3 combo upd). Still with no luck. Strange things are happening - fresh install - card recognized correctly, i have to choose wifi network, put in WEP key, and system says - "connection timeout". So i close this window, but in 15 seconds signal shows up in the signal meter in menu bar and card is working. - huh??? I read some posts from owners of this Asus, many of them has connection timeouts, but no one noticed, card is working after closing timeout window. I have to do this everytime I boot system. Even if I installed updated Broadcom drivers from 'mcsmart' from here - LINK. Other issue is, that card works very fast with no problems.. but in unexpected intervals, will ping increase rapidly from normal value (10-30ms) to 700-2000ms and connection starts to be unusable and very slow. It happens about every 5 minutes. Has anyone know solution? Thanks. (other than buy new adapter;-)
  13. ATI Radeon HD pkg installers 10.5.x & 10.6

    hello, it seems like everyone with 3650, who performed 10.5.3 kalyway combo update, have white menus bug. leo4all and kalyway. I saw one post where someone with iatkos updated to 10.5.3 and everyhting was working.. so hope you will wind the way to fix it.. thanks for your good work!
×