Jump to content

jbesclapez

Members
  • Content Count

    15
  • Joined

  • Last visited

About jbesclapez

  • Rank
    InsanelyMac Protégé
  1. Hello,The actual guides only mention Bluetooth V4 and advise us to get a Broadcom BCM94360 like the DW1830.Apple is now using the Bluetooth V5 so I was hoping to see the recommended chipset in the guide.Do you have any idea on what is the recommendation for Bluetooth V5 with Native Support?Thanks
  2. jbesclapez

    Chat is down?

    Me again... chat is down again?
  3. Will dig into all that. Thanks guys!
  4. Hello, I think the title says it all, but in case : What LAN card (cable not wifi) is working natively in High Sierra and higher (for later). Thanks
  5. jbesclapez

    AppleALC — dynamic AppleHDA patching

    My Mic is not working using AppleALC. 1- Laptop model Asus Zenbook UX305UA 2- Codec CX20751/2 3- Layout tested : 3 and 28 4- OSX 10.12.6 Here is an extract of my lspci in linux : snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing. [ 16.679500] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 16.679502] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 16.679504] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 16.679505] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 16.679505] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 16.679507] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 16.679508] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 16.680479] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication The full is here: https://pastebin.com/HiqyiT5c Here is the info.plist generated using the tool Codec-Info.command And the extract of the terminal when I did it. Please note there was an error in it. https://drive.google.com/open?id=0B6oFCae5ZUQXQWVHcWRfYzl5aHc Here is the Clover folder I use: https://drive.google.com/open?id=0B6oFCae5ZUQXQWVHcWRfYzl5aHc The sound is working OK but not the internal mic. Please could one of you help me solving this mic issue. Thanks
  6. jbesclapez

    Chat is down?

    Hello, Is it only me or the chat is down? Cheers
  7. jbesclapez

    AppleHDA Patcher

    Hi All, I am totally lost on how to use this AppleHDA patcher. I used the laptop version with a patch with COnnexant 20752 and it gives me some files... However from there, I am totally lost. The guide is not clear on what files I should use and not used. I tried the AppleHDA.kext in SLE but the it does not boot and stays stuck with a Sound assertion error and IOConsoleUsers ... So, how do I use that ?
  8. jbesclapez

    El Capitan: Realtek ALC AppleHDA Audio

    Thanks Toleda for putting me in the right track - Once again :-) My config Plist was setting injection in audio 9. So I reverted it to Audio 1. I also deleted my DSDT, as it seems not necessary. Then I rebooted and run cloverALC and I went in system preference, audio... everything was back to normal. Thanks again
  9. jbesclapez

    El Capitan: Realtek ALC AppleHDA Audio

    Dear Toleda, I hope you will have a bit of time to help me on my 10.11 update coming from 10.10. I prepared a problem reporting as you wanted. Description of audio problem : When running the audio_cloverALC-110_v1.0o10.command i get an error saying : File: audio_cloverALC-110.command_v1.0o10 EFI partition is mounted System Integrity Protection status: disabled. OK to patch Confirm Realtek ALC898 (y/n): y Audio ID: 9 is not supported, continue (y/n): OS X version/motherboard model/BIOS version/processor/graphics OSX 10.11.3 GA-Z77X-UD5H Bios F14 i5-3570k GTX670 Procedure/Guide Used Tried ##### and your latest audio_cloverALC-110.command_v1.0o10 I upgraded from a working yosemite with sound working. Audio/ALC Injection (Tools 3.) See file Copy of IOReg - IOReg_v2.1/File/Save a Copy As…, verify file (Tools 1.) See file I am using the latest clover version. Thanks for your time. EDIT: I forgot to add that i Sytem Preference, in sound, nothing shows up in input and output (only my airplay sound) BootLog-DPCI-jbesclapez.txt CodecDetect.txt Console-jbesclapez.txt DSDT.aml.zip AppleHDA copy.kext.zip iMac-jbesclapez.zip
  10. jbesclapez

    Broadcom bcm43xx wireless driver [beta]

    Guys, I tried everything here. My device is well listed (device ID) and everything should work but it does not. My device is a belkin F5D7001 with Broadcom 4306... I see it using DPCI manager. However the wifi is not working. It keeps on searching. I did all the "advices" under the first post... no luck. I am testing this on 10.11. Is the issue coming from the OS version? Which "updated" version of the OSX will it work. I am OK to downgrade... Thanks for your time
  11. Hello, I have a running OS X using clover v29x (an older version). How can i easily update to the latest version? I do not see anything posted about the updates. Only about fresh installs... Thanks for your help.
  12. Hi there, First of all, thanks to the dev team for the work on clover. Great !! I am now running OS X yosemite with a clover install. I needed to make some changes in the serials (MLB/ROM/SMUUID...) and I did it with clover configurator. Unfortunately it booted as i could see the choice of boot drive but after that it slows down during the grey apple boot. Then no image at all but the computer is running. I had to reverse back and go back to my original config.plist. I also tried to manually change the config.plist but i had the same result. Please could you guide me to a solution as i really would like to change my serials... Thanks
  13. Problem solved.... i dont know why but the single user mode worked now. :-) Thanks guys
  14. Thanks STLVNUB but i can not boot into this mode. I can not even boot on USB... that is why i think of using the disk target mode (or extract my disk) to check those serials.. But it is pointless if there is no way to check those data on the drive itself.... any idea?
  15. Hi there, My Macbook Pro 2011 just broke. It seems to be a common issue with this model (the GPU issue)... I can not even login. Only can run the Hardware test (which says everything is ok, btw :-) ) I got myself a new mac and i was thinking of connecting it as target mode to retrieve the serials like MLB/ROM, SMMUID... to try to use it on a hackintosh... How can I get this info now? I should have done it later, i am stupid... Where are these serials stored on the hardrive? I can also open it to check if the firefwire mac adress is writen there (or network adress), but i do not want to do it now... (i am still hoping for a fix - or apple will react). Thanks for helping me to get these serials. Cheers and Happy new year to all of you
×