Jump to content

jack-69

Members
  • Content count

    15
  • Joined

  • Last visited

About jack-69

  • Rank
    InsanelyMac Protégé

Profile Information

  • Gender
    Male
  • Location
    Italy

Recent Profile Visitors

2,188 profile views
  1. I used the Rehabman's patches and these specific kext.
  2. Hi, I've created the USB with Rufus and the Windows 10 ISO. (Mode GPT for UEFI)
  3. jack-69

    [Risolto] El capitan su HP 630

    Guarda questo topic...
  4. Enable Turbo Boost: For enable the turbo boost, don't use SSDT and delete (or don't use) generate P - C state in to the clover's config.plist. DisableTurboBoostBattery.kext.zip
  5. DISM is your friend! Part 1: (For all the computers that don't have UEFI) Prepare two USB keys, one with El Capitan & one with Windows 10. First put the Windows USB, during the installation (when it asked the Windows code) press shift + f10 and will open the command prompt: diskpart list disk (list of your hdd) select disk 0 (0 is number of your hdd) clean (ATTENTION clean all your hard disk selected) convert gpt create partition efi size=200 (creates EFI partition) format fs=fat32 label=EFI We made a EFI partition. In my Hdd I have 3 partitions ( 1 for Mac, 1 for Windows=Ntfs & 1 in exFat for sharing files between the two systems). create partition primary size=100000 (1 partition for Mac OS X 100GB) format fs=fat32 quick label=Mac (after we will format in HFS+ with disk utility) create partition msr size=128 (creates Microsoft Reserved) create partition primary size=100000 (1 partition for Windows 10 100GB) format fs=ntfs quick label=Windows (format in Ntfs) create partition primary (creates a partition with the remaining space) format fs=exfat quick label=Hdd (format in exFat) Now the fun part. We should insert the letters for the partitions. Check select disk 0 list volume (check the assigned letters, REMINDS the letter assigned to the USB "example d") list partition (check the number of partition EFI "example partition 1") select partition 1 assign letter=h list partition (check the number of partition Windows "example partition 3") select partition 3 assign letter=g exit Then we have the letter "D:\" for the USB, "H:\" for the EFI partition & "G:\" for the Windows partition. Now we need to copy the installation files from the USB to the Windows partition. cd\windows\system32\ dism /apply-image /imagefile:d:\sources\install.wim /index:1 /applydir:g:\ Break.... Now we need the Windows EFI boot files. cd\ g: bcdboot (check the command line) bcdboot g:\windows /1 en-us /s h: /f UEFI (in my case "/1 It-it") Restart the computer with the Mac USB "Clover bootloader", then select Microsoft EFI and start the installation of Windows 10 in FULL GPT. If you don't see the exFat partition in Windows don't worry. (Take a program like Partition Wizard, format the partition in NTFS and assigns the letter D:\. Now open the command prompt administrator and write: diskpart select disk 0 list partition (check the partition before-exFat = after-NTFS "example partition 4") select partition 4 format fs=exfat quick label=Hdd Now you must have the partition exfat visible and writable) Part 2: Important! Don't format or delete the EFI partition. From the Mac USB we need delete AppleIntelHDGraphicsFB.kext. Now we go in to the installation of El Capitan, with disk utility format the partition "Mac" in HFS+ mac journaled, then install Mac OS X. While starting El Capitan from your hard drive, we must block AppleIntelHDGraphicsFB.kext and AppleIntelHDGraphics.kext. (& add cpus=1 or patch with clover) When El Capitan is started: Patch AICPM with Clover Configurator Install Clover like this (of course without installation El Capitan) "Legacy mode" Replace the config.plist in EFI partition and add SMBIOS with clover configurator - macbook pro 6.1 Put the DSDT Put HFSPlus.efi, NTFS.efi in drivers64 folder Insert and replace all kext PS:During the first system start we must go in the system preferences, keyboard, shortcuts and change the key combination of brightness (f2- f3+). Work: Intel Core i5 460M Intel HD Graphics (Clean graphics without artifacts) Wifi & Ethernet (Atheros AR9285 & Realtek 8111) Stereo speakers & Microphone (IDT92HD81B1X5) Keyboard & multi-touch touchpad Memory Card Reader Camera All USB Battery Sleep & Wake Brightness Values App Store Don't work: ATI Mobility Radeon HD 5470 (Blocked by BIOS) FaceTime (With Rom,SN,MLB valid work) iMessage (With Rom,SN,MLB valid work) Maps Thanks : GhostRider - pokenguyen - Mirone & Micky1979 - RehabMan HP El Cpitan.zip
  6. There are a lots of methods... http://www.insanelymac.com/forum/topic/298753-boot-usb-os-x-yosemite-chameleon/ Search on Google...
  7. Then is not good.... The webcam ( before being patched ) is recognized among the devices ?
  8. http://www.insanelymac.com/forum/topic/237750-fix-for-firewire-and-hpet-irq-conflict-using-dsdt/ http://www.insanelymac.com/forum/topic/206313-dsdt-patch-to-fix-unable-to-get-filterinterrupteventsource-errors/
  9. Device (HPET) { Name (_HID, EisaId ("PNP0103")) Name (_UID, Zero) Name (BUF0, ResourceTemplate () { IRQNoFlags () {2} IRQNoFlags () {8} IRQNoFlags () {11} IRQNoFlags () {15} Memory32Fixed (ReadWrite, 0xFED00000, // Address Base 0x00000400, // Address Length ) })
  10. For my webcam I patched HPET in DSDT...
  11. Sorry... I'll change the post. Thank You
  12. Yosemite on HP Pavilion dv6-3103sl Hi everyone, this is a installation guide for the old and good HP dv6-3103sl. {Chameleon bootloader} Intel Core i5 460M (Work) ATI Mobility Radeon HD 5470 (Don't work "BIOS block") Intel HD Graphics (Work) QE/CI graphics acceleration Wifi & Ethernet (Work) (Wifi: Atheros AR9285) (Ethernet: Realtek 8111) Stereo speakers & Microphone (Work) (Audio: IDT92HD81B1X5) Keyboard & multi-touch touchpad (Work) Memory Card Reader (Work) Camera (Work) [Poor quality FaceTime, open Photo Booth to increase] All USB (Work) ​ ​Battery (Work), Sleep & Wake (Work), Brightness Values (Work), App Store (Work), FaceTime (Work), iMessage [Don't work (Rom SN MLB valid Work)] Install Yosemite with cpus=1 (prevents "kernel panic"). When the installation is complete, install Chameleon, FakeSMC, SMbios (Mac Book Pro 6.1) & overwrite the folder Extra (you can change settings with Chameleon Wizard) . Don't REBOOT.​ Patch AICPM with AICPMPatch (Terminal). Copy the KernelPatcher inside " Extra/modules " ( after you can reboot without cpus = 1 ) Install all kext (Kext Wizard) & RESTART. PS: if you want the turbo-boost processor , do not use SSDT ( use only "generate P & C -states" ) Enjoy Special thanks: GhostRaider Giofrida mnorthern pokenguyen Mirone RehabMan Download: HP Yosemite.zip
×