Jump to content

Mac_hack13

Members
  • Content Count

    28
  • Joined

  • Last visited

Everything posted by Mac_hack13

  1. Hello i managed to install yosemite on HP g6-2290sx using clover efi r2953 ... i ve got the trackpad,keyboard,battery and audio working... However i cant get the intel HD 4000 to work as it should, it has only 4 mb vram and graphics are slow and has artifacts. also i need to get the ralink wifi and bluetooth and the realtek ethernet to work... list of hardware: Audio IDT working automatically GPU intel HD 4000 not working preoperly trackpad working keyboard working USB working battery working ralink wifi not working ralink bluetooth not working realtek ethernet not working properly Thanks
  2. how to make the HP webcam work? are there any kexts for ralink/mediatek RT3290 wireless and bluetooth? is there any guide to fix the brightness? in the middle of the booting proccess the apple logo gets washed away in a way similar to incorrect edid injection,any fix for that? Thanks
  3. How to fix the brightness?
  4. i looked up the page but it didnt work also there is a fake id thing which i cant figure out... i tested 0x01660003 3 ports 1024 vram....same update... it now works with 0x016600003 and duallink 0 fakeis is 0x00000000 but the the brightness is reduced a little and the apple logo is washed out when booting
  5. Hello This is my second Thread i have a working mac os x 10.9 mavericks on the wd 500gb hdd on the first partition ,second partition is for snow leopard but empty, third partition is ext4 ubuntu, fourth partition is ext4 debian, fifth partition is HFS+ for data only, sixth partition is EXT4 for data only , seventh is swap. i installed ubuntu and debian to their partitions but cant boot them ! i thought that they would be recognized by clover efi but they aren't recognized :/ Clover is working normally without and able to boot os x without any problem. System specs : CPU : Core i7 4770 non k ! MB : ASUS MAXIMUS VI FORMULA RAM : kingston HyperX BEAST 2x8 16GB kit HDD : lots of stuff but i am using a western digital 500GB caviar green drive for testing , will be upgrading to intel series 320 160 GB SSD GPU : ASUS Nvidia GTX 650 TI BOOST OC (I know that this gnu is irrelevant with the rest of the specs this is my old gpu) SPU : the internal ALC1150 for now. WIFI+BLUETOOTH : included mpcie combo broadcom wifi and bt . What can i do to make this work ? Thanks
  6. i installed ubuntu but cant boot it :3 i need to install grub 64 efi on the efi partition but i dont know how >_<
  7. this guide doesnt work for me, i actually looked at it b4 posting this thread... windows installation doesnt work this way,linux installs normally but isnt bootable and i cant find the grub 2 files on the efi partition...
  8. it worked now it was missing fakesmc
  9. Hello This is my first post currently i am posting this on my os x 10.9 mavericks i tried to install the clover efi on the hdd it booted but can't boot into the os x ... i must use the usb to boot the os x... System specs : CPU : Core i7 4770 non k ! MB : ASUS MAXIMUS VI FORMULA RAM : kingston HyperX BEAST 2x8 16GB kit HDD : lots of stuff but i am using a western digital 500GB caviar green drive for testing , will be upgrading to intel series 320 160 GB SSD GPU : ASUS Nvidia GTX 650 TI BOOST OC (I know that this gnu is irrelevant with the rest of the specs this is my old gpu) SPU : the internal ALC1150 for now. WIFI+BLUETOOTH : included mpcie combo . So i need help regarding booting the os x without any problems and without the usb. also i need to get the wifi & bluetooth working. I think the gnu is detected automatically maybe it's fine. Thanks EDIT : now i discovered that you don't support tonymac's software , i am not asking for support for his software , i have a working OS X installation missing a working boot loader.
  10. i tried pokenguyen's AIO Guides for Hackintosh and his Hackintosh Vietnam Tool and i get the same error !
  11. i know about efi partition i meant where the minimal version of config.plist is located...
  12. where is that file ? I want to follow the wiki first b4 using any tools...
  13. still ... where is the minimal version of config.plist that should be included in clover installer? i cant find it!
  14. the /usr/local/bin/clover-genconfig > ~/Desktop/config.plist gives error and its described in the wiki that i must boot the os x successfully with clover itself with minimal configuration file and after that executing that command... my gpu is supported by the os x default driver but sadly no offical nvidia driver or modified kext is available for my gpu
  15. ok i read some stuff and stopped at this page of the wiki http://clover-wiki.zetam.org/Configuration i cant find the "minimal" version of the config.plist to start with... where can i find it or maybe generate it?
  16. i looked at guides talking about this but i don't understand anything as i am new to this :\
  17. let me explain the problem in more detail ... i installed the boot loader to the efi partition of the hdd successfully,then i restart and the bios identifies the hdd as "UEFI OS" i choose it as a boot option then it boots, now i have a list of all drives i choose the drive which i installed the mac on, lots of white text appear ending with "missing bluetooth controller transport" and after that i have no option but to reboot...
  18. chameleon & chimera don't boot, clover boots but the os x it self doesn't boot ! thanks for the replies , keep them coming... i will try to sort stuff after a few hours from now Thanks
×