Jump to content

Logan Forand

Members
  • Content count

    9
  • Joined

  • Last visited

About Logan Forand

  • Rank
    InsanelyMac Protégé

Contact Methods

  • Website URL
    http://www.loganforand.com
  1. Kalyway 10.5.2 FULL GUIDE

    I'm delighted to help, I've been down your road, and glad i got support also or else i'd still be lost.. Pass it on now you are a tiny bit of an expert in the field, lol.. Enjoy Leopard on your computer, hope all works.. I had an issue in my wireless could never get it to work, so back to winxp...
  2. Kalyway 10.5.2 FULL GUIDE

    No as far as i remember nothing shows up, it looks blank like nothing is typed... your on the right track my friend :censored2:
  3. Kalyway 10.5.2 FULL GUIDE

    yea man thats where you press -s and no worries i was a bit of a noob with this not so long ago, lol Let me know. Cheers
  4. Kalyway 10.5.2 FULL GUIDE

    Yea if you boot from the disk it's not writable do it from the hdd, and let me know.. cheers
  5. Kalyway 10.5.2 FULL GUIDE

    Hi I got that too, first thing installing leopard make sure to go into disk utility and format the hdd in hfs, after install when your doing your bootup commands... put in 100% to the detail excluding the " ... "/sbin/mount -uw_/" so you want to be putting in /sbin/mount -uw / the underscore after -uw_ is a space so -uw / and enter it should work now.. let me know, cheers
  6. Kalyway 10.5.2 FULL GUIDE

    Try this, it works... 8.) Run the installation. Wait until the computer reboots. 9.) As the computer is rebooting and you get to the Darwin bootloader, hit F8. 10.) Type the following code: (the stuff you actually type is in quotes) - type "-s" and then press enter - type "/sbin/fsck -fy" and then press enter - type "/sbin/mount -uw /" and then press enter - type "passwd root ##" and press enter - you will know be prompted to put in your password twice. Do so and press enter. - type "touch /var/db/.AppleSetupDone and press enter - type "exit" and press enter. you will now be booted into Leopard. 11.) Once at the login screen, type "root" for username and the password you set for the password. Congratulations. You are now in Leopard.
  7. I got WIRELESS drivers by asking manufacturer......

    Hi I'm having an issue with the Wireless on my Toshiba Equium A200-1V0 WiFi: Realtek 8197 (Working with (Realtek_RTL8187B_MacOS10.4_Driver_1088_UI_1.5.0) - requires vendor:poductid mod in Info.plist) edit RTL8187B.kext/Contents/Info.plist and in the 8187B personality, add: <key>IOKitDebug</key> <integer>65535</integer> You would add these two lines under: <key>idVendor</key> <integer>3034</integer> Then do: sudo kextunload RTL8187B.kext sudo kextload RTL8187B.kext if that did work try Once you have dragged the file into /System/Library/Extensions/ you will need to Authenticate with your administrative password. Once you have authenticated you will need to open a terminal window & paste the following commands into the terminal: sudo chmod -R 755 /System/Library/Extensions/RTL8187B.kext [authenticate again] sudo chown -R root:wheel /System/Library/Extensions/RTL8187B.kext sudo kextload -v /System/Library/Extensions/RTL8187B.kext [manually load kext] When you have manualy loaded the kext Successfully you should get the following text or something similar. Once the kext is successfully loaded clear the kext cache to do this copy and paste the following into a Terminal: sudo rm /System/Library/Extensions.mkext [This forces the system to re-examine all of the drivers and rematch during the next boot cycle.] Now Reboot. Did that and still nothing, nothing even shows up? I have got my lan card to work now to get wireless working i use that most. Any ideas? Thanks
  8. Kalyway 10.5.2 FULL GUIDE

    Hi, I've been stuck on this issue for a good while... I've a Toshiba A200-1V0, I'm having an issue with both Lan and Wireless. I've followed tons of steps around the net Wireless: Realtek_RTL8187B_MacOS10.4_Driver_1088_UI_1.5.0 edit RTL8187.kext/Contents/Info.plist and in the 8187B personality, add: <key>IOKitDebug</key> <integer>65535</integer> You would add these two lines under: <key>idVendor</key> <integer>3034</integer> Then do: sudo kextunload RTL8187B.kext sudo kextload RTL8187B.kext didn't work Lan \System\Library\Extensions\IONetworkingFamily.kext\Contents\PlugIns\AppleYukon.kext\Contents\Info.plist and edit it to include your ID (On linux, use 'lspci -nn' to display text and numeric ID of device), which should be structured like: 0x435311ab And that did nothing... Have you copied the AppleYukon.kext to /System/Library/Extensions/ Once you have dragged the file into /System/Library/Extensions/ you will need to Authenticate with your administrative password. Once you have authenticated you will need to open a terminal window & paste the following commands into the terminal: sudo chmod -R 755 /System/Library/Extensions/AppleYukon.kext [authenticate again] sudo chown -R root:wheel /System/Library/Extensions/AppleYukon.kext sudo kextload -v /System/Library/Extensions/AppleYukon.kext [manually load kext] When you have manualy loaded the kext Successfully you should get the following text or something similar. Once the kext is successfully loaded clear the kext cache to do this copy and paste the following into a Terminal: sudo rm /System/Library/Extensions.mkext [This forces the system to re-examine all of the drivers and rematch during the next boot cycle.] Now Reboot. did that and nothing. I'm lost completly, please help me, lol Also just a question my graphics card seems to work okay, but when i try to run a video, VLC crash's and quicktime just doesn't play anything and the screensaver moves very slowly Am i into deep here, lol I hope i don't have to go back to windows. I have the latest imac and just want to have leopard on the laptop, and now it runs superfast, just the three items i've an issue with. If you need to know anything else please let me know, and thanks in advance and sorry for the very long message, lol Thanks very much Logan
  9. Hi Guys i too am a Boot Camp User and was stuck with NTFS Probs and used the MacFUSE and NTFS-3G Packages so i wrote a little script to auto start the NTFS Read / Write when we log in works fine for me. Heres a link to a .DMG i created it has both the MacFUSE and NTFS-3G driver plus instructions and my Terminal command Script and it's easy to follow. Enjoy http://rapidshare.com/files/53713428/MacFU...TFS-3G.dmg.html
×