Jump to content

junecaz

Members
  • Content count

    12
  • Joined

  • Last visited

About junecaz

  • Rank
    InsanelyMac Protégé

Profile Information

  • Gender
    Male
  • Location
    Brazil
  1. Sir Slice, if you have time, can you help-me with a patch? Junsai from 10.9.3
  2. Try another smbios, like 3,1, 5,1 or 6,3 with GE=no. Another test you can do: When you got White screen, try unplug and plug trick.. When you use a framebuffer, did you set Ati Ports? You can try 3,4 or 5.
  3. junecaz

    Sapphire HD 7850 Full Works !

    @XITE666 If you have time, can you help-me search the correct hex? Its a Asus 7979 DirectCU II @ 10.9.3 13D21. I have 2x Display @ 2560x1440 with DisplayPort connection. Using Junsai Framebuffer i got 1 monitor working in the second (DP-2) ONLY IF i put another DP cable connected in another port (DP-3), but still, only one monitor works. Max resolution in DVI-D is 1600x1200. I have 4x DP and 2x DVI (one single and another dual link) in this card. Without GraphicsEnabler i got all ports working with exception of DP-1. IOReg attached with GraphisEnabler = NO. 2x DP monitor working @ 2540x1440 but i need a framebuffer (random artefacts with ge=no). Can you help-me with Junsai? Thanks! → ./radeon_bios_decode < OLDBIOS.BIN ATOM BIOS Rom: SubsystemVendorID: 0x1043 SubsystemID: 0x0442 IOBaseAddress: 0x0000 Filename: AS08U2.bin BIOS Bootup Message: 6798.15.12.0.4.AS08.U2 PCI ID: 1002:6798 Connector at index 0 Type [@offset 45292]: DisplayPort (10) Encoder [@offset 45296]: INTERNAL_UNIPHY1 (0x20) i2cid [@offset 45428]: 0x92, OSX senseid: 0x3 Connector at index 1 Type [@offset 45302]: DisplayPort (10) Encoder [@offset 45306]: INTERNAL_UNIPHY1 (0x20) i2cid [@offset 45455]: 0x93, OSX senseid: 0x4 Connector at index 2 Type [@offset 45312]: DisplayPort (10) Encoder [@offset 45316]: INTERNAL_UNIPHY2 (0x21) i2cid [@offset 45482]: 0x90, OSX senseid: 0x1 Connector at index 3 Type [@offset 45322]: DVI-I (2) Encoder [@offset 45326]: INTERNAL_UNIPHY2 (0x21) i2cid [@offset 45519]: 0x91, OSX senseid: 0x2 Connector at index 4 Type [@offset 45332]: DVI-I (2) Encoder [@offset 45336]: INTERNAL_KLDSCP_DAC1 (0x15) i2cid [@offset 45519]: 0x91, OSX senseid: 0x2 Connector at index 5 Type [@offset 45342]: DVI-D (3) Encoder [@offset 45346]: INTERNAL_UNIPHY (0x1e) i2cid [@offset 45546]: 0x94, OSX senseid: 0x5 → ./redsock_bios_decoder < OLDBIOS.BIN AS08U2.bin : 6798.15.12.0.4.AS08.U2 Subsystem Vendor ID: 1043 Subsystem ID: 442 Object Header Structure Size: 453 Connector Object Table Offset: 52 Router Object Table Offset: 0 Encoder Object Table Offset: 145 Display Path Table Offset: 12 Connector Object Id [19] which is [DISPLAY_PORT] encoder obj id [0x20] which is [iNTERNAL_UNIPHY1 (osx txmit 0x11 [duallink 0x1] enc 0x2)] linkb: false Connector Object Id [19] which is [DISPLAY_PORT] encoder obj id [0x20] which is [iNTERNAL_UNIPHY1 (osx txmit 0x21 [duallink 0x1] enc 0x3)] linkb: true Connector Object Id [19] which is [DISPLAY_PORT] encoder obj id [0x21] which is [iNTERNAL_UNIPHY2 (osx txmit 0x12 [duallink 0x2] enc 0x4)] linkb: false Connector Object Id [1] which is [DVI_I] encoder obj id [0x21] which is [iNTERNAL_UNIPHY2 (osx txmit 0x22 [duallink 0x2] enc 0x5)] linkb: true Connector Object Id [1] which is [DVI_I] encoder obj id [0x15] which is [iNTERNAL_KLDSCP_DAC1 (osx txmit 0x00 enc 0x10?)] linkb: false Connector Object Id [4] which is [DVI_D] encoder obj id [0x1e] which is [iNTERNAL_UNIPHY (osx txmit 0x10 [duallink 0x0] enc 0x0)] linkb: false junecaz.ioreg.zip
  4. junecaz

    OS X Mavericks 10.9.3 to dev

    ATi 7970 working again in 10.9.3 without inject. 2000+ luxmark. Multi-monitor setup @ 2x U2711 2560x1440. Audio (Realtek 892 / Asus P8Z77-V) won't work after sleep. Any tips i can try?
  5. junecaz

    7970 mysteries in 10.9.2.

    Problem solved with 10.9.3 beta. No framebuffer inject need, no unplug trick, all ports @ 7970 working. 2000+ luxmark.
  6. junecaz

    7970 mysteries in 10.9.2.

    Great! Thanks for the info. How OSX recognize you card? ATI 7xxx or 7970?
  7. junecaz

    7970 mysteries in 10.9.2.

    Get correct performance with edited Junsai framebuffer! But only one DP output works simultaneously with DVI-D (the unplug and plugin trick @ dvi is required to get 2560x1440). Both monitors plugged in 7970 @ 2560x1440 and great performance (2000+ luxmark). Well.. progress.. i think. Thats great news! Do you have multiple monitor setup? What resolutions?
  8. junecaz

    7970 mysteries in 10.9.2.

    I REALY understand how you feel Sir. Best wishes with you new card. Thx for Junsai tip, i will give a try.
  9. junecaz

    7970 mysteries in 10.9.2.

    I got this problem @ 10.9.1, you can try another connector, like DP.
  10. junecaz

    7970 mysteries in 10.9.2.

    Progress! Got 1x DP + 1x DVI-D @ 7970 at same time functional! :-) But low score @ Luxmark. Using Vervet framebuffer (ioreg | grep ATY get ATY,AMD,RadeonFramebuffer, so no framebuffer) with 1x monitor @ DVI-D 7970 and 1x monitor @ DP in CPU-VGA i get 2000+ points. Any tips to get more juice from VGA when framebuffer is enable?
  11. junecaz

    7970 mysteries in 10.9.2.

    Got full acceleration @ DVI-D port and card name as Asus HD7970 with MaguroS edited framebuffer: 00 04 00 00 04 03 00 00 00 01 00 00 01 02 01 03 00 04 00 00 04 03 00 00 00 01 00 00 01 03 02 04 00 04 00 00 04 03 00 00 00 01 00 00 02 04 03 01 00 02 00 00 04 02 00 00 00 01 00 00 02 05 04 02 00 02 00 00 04 02 00 00 00 01 00 00 00 10 05 02 04 00 00 00 14 02 00 00 00 01 00 00 00 00 06 05 → ioreg | grep ATY | | | | +-o ATY,MaguroS@0 <class AtiFbStub, id 0x1000004be, registered, matched, active, busy 0 (1 ms), retain 8> Still no video sign in any DisplayPort of 7970. Anyone can see any error here? DP - 1 INTERNAL_UNIPHY1 3 Connector type 00 04 00 00 Control flags (ATY,ControlFlags) 04 03 00 00 Features 00 01 Unknown 00 00 Transmitter 01 Encoder 02 HotPlug ID 01 Sense ID 03 00 04 00 00 04 03 00 00 00 01 00 00 01 02 01 03 DP - 2 INTERNAL_UNIPHY1 4 Connector type 00 04 00 00 Control flags (ATY,ControlFlags) 04 03 00 00 Features 00 01 Unknown 00 00 Transmitter 01 Encoder 03 HotPlug ID 02 Sense ID 04 00 04 00 00 04 03 00 00 00 01 00 00 01 03 02 04 DP - 3 INTERNAL_UNIPHY2 1 Connector type 00 04 00 00 Control flags (ATY,ControlFlags) 04 03 00 00 Features 00 01 Unknown 00 00 Transmitter 02 Encoder 04 HotPlug ID 03 Sense ID 01 00 04 00 00 04 03 00 00 00 01 00 00 02 04 03 01 DVI-I INTERNAL_UNIPHY2 2 Connector type 00 02 00 00 Control flags (ATY,ControlFlags) 04 02 00 00 Features 00 01 Unknown 00 00 Transmitter 02 Encoder 05 HotPlug ID 04 Sense ID 02 00 02 00 00 04 02 00 00 00 01 00 00 02 05 04 02 DVI-I INTERNAL_KLDSCP_DAC1 2 Connector type 00 02 00 00 Control flags (ATY,ControlFlags) 04 02 00 00 Features 00 01 Unknown 00 00 Transmitter 00 Encoder 10 HotPlug ID 05 Sense ID 02 00 02 00 00 04 02 00 00 00 01 00 00 00 10 05 02 DVI-D INTERNAL_UNIPHY 5 Connector type 04 00 00 00 Control flags (ATY,ControlFlags) 14 02 00 00 Features 00 01 Unknown 00 00 Transmitter 00 Encoder 00 HotPlug ID 06 Sense ID 05 04 00 00 00 14 02 00 00 00 01 00 00 00 00 06 05
  12. junecaz

    7970 mysteries in 10.9.2.

    @khe91 did you find a solution or make progress? I have a similar graphics card (Asus 7970 DirectCU II - HD7970-DC2T-3GD5) with 4x DP and 2x DVI (1x SL and 1x DL) just like you. :-) → ./radeon_bios_decode < OLDBIOS.BIN ATOM BIOS Rom: SubsystemVendorID: 0x1043 SubsystemID: 0x0442 IOBaseAddress: 0x0000 Filename: AS08U2.bin BIOS Bootup Message: 6798.15.12.0.4.AS08.U2 PCI ID: 1002:6798 Connector at index 0 Type [@offset 45292]: DisplayPort (10) Encoder [@offset 45296]: INTERNAL_UNIPHY1 (0x20) i2cid [@offset 45428]: 0x92, OSX senseid: 0x3 Connector at index 1 Type [@offset 45302]: DisplayPort (10) Encoder [@offset 45306]: INTERNAL_UNIPHY1 (0x20) i2cid [@offset 45455]: 0x93, OSX senseid: 0x4 Connector at index 2 Type [@offset 45312]: DisplayPort (10) Encoder [@offset 45316]: INTERNAL_UNIPHY2 (0x21) i2cid [@offset 45482]: 0x90, OSX senseid: 0x1 Connector at index 3 Type [@offset 45322]: DVI-I (2) Encoder [@offset 45326]: INTERNAL_UNIPHY2 (0x21) i2cid [@offset 45519]: 0x91, OSX senseid: 0x2 Connector at index 4 Type [@offset 45332]: DVI-I (2) Encoder [@offset 45336]: INTERNAL_KLDSCP_DAC1 (0x15) i2cid [@offset 45519]: 0x91, OSX senseid: 0x2 Connector at index 5 Type [@offset 45342]: DVI-D (3) Encoder [@offset 45346]: INTERNAL_UNIPHY (0x1e) i2cid [@offset 45546]: 0x94, OSX senseid: 0x5 → ./redsock_bios_decoder < OLDBIOS.BIN AS08U2.bin : 6798.15.12.0.4.AS08.U2 Subsystem Vendor ID: 1043 Subsystem ID: 442 Object Header Structure Size: 453 Connector Object Table Offset: 52 Router Object Table Offset: 0 Encoder Object Table Offset: 145 Display Path Table Offset: 12 Connector Object Id [19] which is [DISPLAY_PORT] encoder obj id [0x20] which is [iNTERNAL_UNIPHY1 (osx txmit 0x11 [duallink 0x1] enc 0x2)] linkb: false Connector Object Id [19] which is [DISPLAY_PORT] encoder obj id [0x20] which is [iNTERNAL_UNIPHY1 (osx txmit 0x21 [duallink 0x1] enc 0x3)] linkb: true Connector Object Id [19] which is [DISPLAY_PORT] encoder obj id [0x21] which is [iNTERNAL_UNIPHY2 (osx txmit 0x12 [duallink 0x2] enc 0x4)] linkb: false Connector Object Id [1] which is [DVI_I] encoder obj id [0x21] which is [iNTERNAL_UNIPHY2 (osx txmit 0x22 [duallink 0x2] enc 0x5)] linkb: true Connector Object Id [1] which is [DVI_I] encoder obj id [0x15] which is [iNTERNAL_KLDSCP_DAC1 (osx txmit 0x00 enc 0x10?)] linkb: false Connector Object Id [4] which is [DVI_D] encoder obj id [0x1e] which is [iNTERNAL_UNIPHY (osx txmit 0x10 [duallink 0x0] enc 0x0)] linkb: false hackintosh: ~ → ioreg | grep ATY | | | | +-o ATY,AMD,RadeonFramebuffer@0 <class AtiFbStub, id 0x1000004a4, registered, matched, active, busy 0 (3 ms), retain 8> | | | | +-o ATY,AMD,RadeonFramebuffer@1 <class AtiFbStub, id 0x1000004a5, registered, matched, active, busy 0 (0 ms), retain 8> | | | | +-o ATY,AMD,RadeonFramebuffer@2 <class AtiFbStub, id 0x1000004a6, registered, matched, active, busy 0 (0 ms), retain 8> | | | | +-o ATY,AMD,RadeonFramebuffer@3 <class AtiFbStub, id 0x1000004a7, registered, matched, active, busy 0 (0 ms), retain 8> | | | | +-o ATY,AMD,RadeonFramebuffer@4 <class AtiFbStub, id 0x1000004a8, registered, matched, active, busy 0 (0 ms), retain 8> hackintosh: ~ → lspci -nn pcilib: 0000:01:00.0 64-bit device address ignored. pcilib: 0000:00:02.0 64-bit device address ignored. 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0162] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c4) 00:1c.7 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 [8086:1e1e] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation Z77 Express Chipset LPC Controller [8086:1e44] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT [Radeon HD 7970/R9 280X] [1002:6798] 01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Tahiti XT HDMI Audio [Radeon HD 7970 Series] [1002:aaa0] 03:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) 04:00.0 PCI bridge [0604]: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge [1b21:1080] (rev 03) 06:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] The only way i can get working display in my dual monitor (2x DELL U2711 @ 2560x1440) its using first display @ DP in onboard VGA and second display @ DVI-DL in 7970 with framebuffer vervet for AMD and Azul 10 for Intel. hackintosh: /Extra → cat org.chameleon.Boot.plist <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>AtiConfig</key> <string>Vervet</string> <key>AtiPorts</key> <string>1</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> <key>GeneratePStates</key> <string>Yes</string> <key>Graphics Mode</key> <string>2560x1440x32</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>IntelAzulFB</key> <string>10</string> <key>Legacy Logo</key> <string>Yes</string> <key>SystemType</key> <string>1</string> <key>Theme</key> <string>Mavs</string> <key>Timeout</key> <string>1</string> <key>UseKernelCache</key> <string>Yes</string> </dict> </plist>
×