Jump to content

herbalb

Members
  • Content count

    97
  • Joined

  • Last visited

About herbalb

  • Rank
    InsanelyMac Protégé
  1. Nvidia WebDriver no longer work

    I've just send you the file. ^^
  2. Nvidia WebDriver no longer work

    MaLd0n, you are my hero!!!!!! It works - Nvidia Card is working perfect - Display Port, HDMI and DVI are all working. I am so relieved even though I really have no clue what was wrong. Sound is also working fine as well - so I guess I only have to take care of the iMessage again as the model identifier has changed? Again, thanks so much for your help.
  3. Nvidia WebDriver no longer work

    Thank you very much - I'll do this tomorrow and Report Here. I'm already crossing my Fingers.
  4. Nvidia WebDriver no longer work

    Glad your here, thank you so much. But unfortunately nothing helped so far. This is how my Clover-folder looks like at the moment (reverted plist back to the the first one you made).
  5. Nvidia WebDriver no longer work

    I've installed latest Nvidia WebDrivers and also replaced checklist with the one above but it did not help. Then I've pressed O and changed smbios to iMac14,2 but that did not change anything... I just don't get it - everything was fine until 10.12.4 Sorry MaLd0n for causing so much work.
  6. Nvidia WebDriver no longer work

    AGDPfix says patching done, but after reboot nothing has changed. Nvidia card won't get recognised and when I activate Nvidia WebDrivers and reboot, it still reverts back. Tried it with and without "nvda_drv=1"
  7. Nvidia WebDriver no longer work

    Okay, so I did everything as advised but I get a black screen. Removed the boot argument "nvda_drv=1" from the config.plist and then it boots, but Nvidia Card won't be recognised. Should I apply AGDFix now?
  8. Nvidia WebDriver no longer work

    I will try tomorrow and report back. Thanks so much for your help.
  9. Nvidia WebDriver no longer work

    Okay, so I ran the script, opened the generated ssdt with MaciASL, clicked on compile and saved it. Since I've done this for the first time I hope I've done this right? I attached the generated and the compiled files. Oh and replacing VBOXhfs-64 with HFSPlus.efi does that mean I have to rename the downloaded file HFSPlus.efi to VBOXhfs-64 and replace the old one or just delete VBOXhfs-64 and put HFSPlus.efi into that folder? (EDIT: That was a stupid question - since it's the driver folder deleting Vboxhsf and putting HFSPlus into that folder should be fine)
  10. Nvidia WebDriver no longer work

    Many thanks. I ran the ssdtPRGen.command but got a warning and an error: " Warning: 'cpu-type' may be set improperly (0x0705 instead of 0x0905) - Clover users should read https://clover-wiki.zetam.org/Configuration/CPU#cpu_type Error: board-id not supported by Skylake – check SMBIOS data / use the -target option " Is this OK?
  11. Nvidia WebDriver no longer work

    MaLd0n, many thanks for taking care of my problem - I really appreciate this. I ran the app, attached you will find the file generated as well as the content of my EFI partition. The actual Bios is 3007 (have not checked for a while), according to ASUS the latest is 3401 - should I update and run the file again? Again, many thanks for looking into this.
  12. Hello everyone. Yesterday I updated to 10.12.4 and now I cannot activate the Nvidia Driver anymore. It always reverts back to default OS X driver. I updated Clover to the latest version and also updated the WebDriver. I've attached my plist config - would be so great if someone could point me to the right direction as I really have no idea what it could be...
  13. Hello. Recently I installed 10.8.2 on my Laptop (for some reason it permanently freezes shortly after boot if I update to 10.8.5. or if I install 10.9 so I stick with 10.8.2. which is OK for me). So far the system looks good, I got sound and LAN to work, too. And everything seems great in the beginning (according to Geekbech the performance is OK). But the problem is, the system hangs a few seconds when opening or closing an application and this is getting worse the longer I use the system. Activity Monitor shows nothing unusual but when an application hangs, then the CPU usage goes beyond 100%. The Hardware is (MSI EX600): CPU: Intel Core 2 Duo T5750 2,0Ghz RAM: 4GB Chipset: Intel PM965 LAN: Realtek RL8111B/8111C --> Working with Lnx2Macs RealtekRTL81xx.kext Graphics: NVIDIA GeForce 8400M G --> working (I think) Audio: ALC888 @ Intel 82801HBM ICH8M --> working with Voodoo Kext WLAN Atheros AR5007EG Wireless --> not working but I bought me a D-Link DWA-131 DVD-ROM: Not working (I think its a ATA not a S-ATA) For SMBIOS I used MacBookPro4,1 (I also tried 3,1 as these both came with C2D CPUs). I installed FakeSMC, ElliottForceLegacyRTC, Ev0reboot, JMicron36xATA, AHCI_3rd_Party_SATA and NullCPUPowerManagement and patched AppleRTC. I already removed AHCI_3rd_Party_SATA as it is not needed and I think I can delete JMicron36xATA too. And I tried with and without NullCPUPowerManagement.kext but no change. My chameleon.boot.plist looks like that: <key>Graphics Mode</key> <string>1024x768x32</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GraphicsEnabler</key> <string>Yes</string> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string></string> <key>PciRoot</key> <string>0</string> <string>darkwake=0</string> <key>Legacy Logo</key> <string>Yes</string> <key>Timeout</key> <string>2</string> <key>UseKernelCache</key> <string>Yes</string> <key>DropSSDT</key> <string>Yes</string> <key>GenerateCStates</key> <string>Yes</string> <key>GeneratePStates</key> <string>Yes</string>
  14. Thanks for the reply. Unfortunately it did not solve the problem. Strange. UPDATE: I also added PciRoot = 1 and now I get the installer screen. Never had to do this before but it works.
  15. I have a small (I hope) problem with the installation. The USB stick boots fine but then suddenly the screen goes black and nothing happens. I'm using a Nvidia GTX 260 - could there be a problem with this card and the installer? Previous Installations using Tseug's guides always went fine. Any idea?
×