Jump to content
InsanelyMac Forum

bbddpp

Members
  • Content count

    9
  • Joined

  • Last visited

About bbddpp

  • Rank
    InsanelyMac Protégé
  1. bbddpp

    El Capitan: Realtek ALC AppleHDA Audio

    Can I get some assistance please? I've spent hours to no avail. - Fresh install of Sierra on a Acer Aspire Desktop PC - Clover EFI Legacy boot - No DSDT or SSDT , all stock kexts - Used CloverALC120 - Codec is Realtek ALC888S-VD 0x80863A3E Sub-Device 0x10250152 Codec ID 0x10EC0888 Revision 0x0202 AppleHDA.kext in use and ioregistry are attached. Result is no audio device detected except an input mic device for the Logitech camera. ALC888 not detected at all and does not appear in Sound preference pane. audio_codecdetect.command output File: audio_codecdetect.command_v2.0 HDMI audio codec(s) Onboard audio codec Realtek: 0x10ec0888 OS X/10.12 Onboard Audio Device: HDEF@1B Audio ID: 1 Valid audio codec, audio device and Audio ID; audio injection is working Finished logout Saving session... ...copying shared history... ...saving history...truncating history files... ...completed. [Process completed] Run of Script Output Agreement The audio_cloverALC-120 script is for personal use only. Do not distribute the patch, any or all of the files or the resulting patched AppleHDA.kext for any reason without permission. The audio_cloverALC-120 script is provided as is and without any kind of warranty. File: audio_cloverALC-120.command_v1.0b0 Release Mode Password: EFI partition is mounted System Integrity Protection status: enabled (Custom Configuration). Configuration: Apple Internal: disabled Kext Signing: disabled Filesystem Protections: disabled Debugging Restrictions: enabled DTrace Restrictions: enabled NVRAM Protections: enabled BaseSystem Verification: enabled This is an unsupported configuration, likely to break in the future and leave your machine in an unknown state. OK to patch Confirm Realtek ALC888 (y/n): y ALC888 v_0x100202 (Legacy) Clover Audio ID Injection (y/n): y Use Audio ID: 1 (y/n): y Download ALC888 files ... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 23970 100 23970 0 0 17868 0 0:00:01 0:00:01 --:--:-- 17888 Edit config.plist/Devices/Audio/Inject/1 Edit config.plist/SystemParameters/InjectKexts/YES Download kext patches % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 1418 100 1418 0 0 8553 0 --:--:-- --:--:-- --:--:-- 8593 Download config kext and install ... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 3665 100 3665 0 0 24620 0 --:--:-- --:--:-- --:--:-- 24763 Install /Volumes/ESP/EFI/CLOVER/kexts/Other/realtekALC.kext Install System/Library/Extensions/AppleHDA.kext/ALC888 zml files Fix permissions ... Kernel cache... rebuilding //System/Library/PrelinkedKernels/prelinkedkernel kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext AppleIntelE1000e.kext kext-dev-mode allowing invalid signature -67013 0xFFFFFFFFFFFEFA3B for kext AppleMobileDevice.kext kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleHDA.kext KernelCache ID: FF4ABB8A157B7E8AEC6A13EF091BDC59 symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) <createPrelinkedKernel 2795> kextcache updated critical boot files, requesting launchd reboot Install finished, restart required. To save a Copy of this Terminal session: Terminal/Shell/Export Text As ... logout Saving session... ...copying shared history... ...saving history...truncating history files... ...completed. [Process completed] DCPI Manager boot.log 0:100 0:100 MemLog inited, TSC freq: 2499959657 0:100 0:000 LegacyRegion2: Chipset/proc: 0x2E208086 0:100 0:000 Intel Series 4 and similar (PAM 0x90-0x96) 0:100 0:000 Test PAM1=(0x41=90, 0x5a=00, 0x81=00, 0x91=11) at chipset 2E208086 0:100 0:000 , Install = Success 0:110 0:010 BiosVideoDriverBindingStart! 0:111 0:000 BiosVideoCheckForVbe 0:111 0:000 EdidOverride not found 0:255 0:144 Edid1- 0:400 0:144 Edid0- 0:427 0:027 0 640x480 attr=3BF - ok, 640x480, working, highest, pref=0 0:428 0:001 1 800x600 attr=3BF - ok, 800x600, working, highest, pref=1 0:429 0:001 2 1024x768 attr=3BF - ok, 1024x768, working, highest, pref=2 0:430 0:001 3 1280x1024 attr=3BF - ok 0:436 0:006 4 1280x800 attr=3BF - ok 0:436 0:000 BV new mode: 2 1024x768 0:575 0:138 SetMode pref 2 (2) = Success 3:169 2:594 3:169 0:000 Now is 3.10.2016, 23:1:52 (GMT) 3:169 0:000 Starting Clover revision: 3773 on CLOVER EFI 3:169 0:000 Build with: [Args: --no-lto -D NO_GRUB_DRIVERS_EMBEDDED | -D DISABLE_LTO -D NO_GRUB_DRIVERS_EMBEDDED -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 5 | OS: 10.12.1 | XCODE: 8.0] 3:170 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(1,GPT,2B5B840C-D435-4234-9D02-EB1F29721220,0x28,0x64000) @BE881A18 3:170 0:000 SelfDirPath = \EFI\CLOVER 3:170 0:000 === [ Get Smbios ] ======================================== 3:170 0:000 Total Memory Slots Count = 4 3:170 0:000 Type 17 Index = 0 3:170 0:000 SmbiosTable.Type17->Speed = 800MHz 3:170 0:000 SmbiosTable.Type17->Size = 2048MB 3:170 0:000 SmbiosTable.Type17->Bank/Device = BANK0 DIMM0 3:170 0:000 SmbiosTable.Type17->Vendor = Manufacturer00 3:170 0:000 SmbiosTable.Type17->SerialNumber = SerNum00 3:170 0:000 SmbiosTable.Type17->PartNumber = ModulePartNumber00 3:170 0:000 Type 17 Index = 1 3:170 0:000 Ignoring insane frequency value 0MHz 3:170 0:000 SmbiosTable.Type17->Speed = 0MHz 3:170 0:000 SmbiosTable.Type17->Size = 0MB 3:170 0:000 SmbiosTable.Type17->Bank/Device = BANK1 DIMM1 3:170 0:000 SmbiosTable.Type17->Vendor = <null string> 3:170 0:000 SmbiosTable.Type17->SerialNumber = <null string> 3:170 0:000 SmbiosTable.Type17->PartNumber = <null string> 3:170 0:000 Type 17 Index = 2 3:170 0:000 SmbiosTable.Type17->Speed = 800MHz 3:170 0:000 SmbiosTable.Type17->Size = 2048MB 3:170 0:000 SmbiosTable.Type17->Bank/Device = BANK2 DIMM2 3:170 0:000 SmbiosTable.Type17->Vendor = Manufacturer02 3:170 0:000 SmbiosTable.Type17->SerialNumber = SerNum02 3:170 0:000 SmbiosTable.Type17->PartNumber = ModulePartNumber02 3:170 0:000 Type 17 Index = 3 3:170 0:000 Ignoring insane frequency value 0MHz 3:170 0:000 SmbiosTable.Type17->Speed = 0MHz 3:170 0:000 SmbiosTable.Type17->Size = 0MB 3:170 0:000 SmbiosTable.Type17->Bank/Device = BANK3 DIMM3 3:170 0:000 SmbiosTable.Type17->Vendor = <null string> 3:170 0:000 SmbiosTable.Type17->SerialNumber = <null string> 3:170 0:000 SmbiosTable.Type17->PartNumber = <null string> 3:170 0:000 Boot status=0 3:170 0:000 Running on: 'Aspire M5700' with board 'EG45M' 3:170 0:000 === [ GetCPUProperties ] ================================== 3:170 0:000 CPU Vendor = 756E6547 Model=1067A 3:170 0:000 got cores from CPUID_1 = 4 3:170 0:000 The CPU not supported turbo 3:170 0:000 BrandString = Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz 3:170 0:000 MSR dumps: 3:170 0:000 @0x00CD=80000A04 3:170 0:000 @0x0198=616472206004722 3:170 0:000 FSBFrequency=333MHz DMIvalue=333330kHz 3:170 0:000 Corrected FSBFrequency=333MHz 3:170 0:000 Vendor/Model/Stepping: 0x756E6547/0x17/0xA 3:170 0:000 Family/ExtFamily: 0x6/0x0 3:170 0:000 MaxDiv/MinDiv: 7.5/6 3:170 0:000 Turbo: 8/0/0/0 3:170 0:000 Features: 0xBFEBFBFF 3:170 0:000 Threads: 4 3:170 0:000 Cores: 4 3:170 0:000 FSB: 333 MHz 3:170 0:000 CPU: 2500 MHz 3:170 0:000 TSC: 2500 MHz 3:170 0:000 PIS: 1333 MHz 3:170 0:000 === [ GetDevices ] ======================================== 3:170 0:000 PCI (00|00:00.00) : 8086 2E20 class=060000 3:170 0:000 PCI (00|00:01.00) : 8086 2E21 class=060400 3:170 0:000 PCI (00|01:00.00) : 10DE 0A65 class=030000 3:170 0:000 - GFX: Model=MSI GeForce 210 family A8 (Nvidia) 3:170 0:000 PCI (00|01:00.01) : 10DE 0BE3 class=040300 3:170 0:000 - HDMI Audio: 3:170 0:000 PCI (00|00:03.00) : 8086 2E24 class=078000 3:170 0:000 PCI (00|00:19.00) : 8086 10CE class=020000 3:170 0:000 - LAN: 0 Vendor=Intel 3:170 0:000 PCI (00|00:1A.00) : 8086 3A37 class=0C0300 3:170 0:000 PCI (00|00:1A.01) : 8086 3A38 class=0C0300 3:170 0:000 PCI (00|00:1A.02) : 8086 3A39 class=0C0300 3:170 0:000 PCI (00|00:1A.07) : 8086 3A3C class=0C0320 3:170 0:000 PCI (00|00:1B.00) : 8086 3A3E class=040300 3:170 0:000 PCI (00|00:1D.00) : 8086 3A34 class=0C0300 3:170 0:000 PCI (00|00:1D.01) : 8086 3A35 class=0C0300 3:170 0:000 PCI (00|00:1D.02) : 8086 3A36 class=0C0300 3:170 0:000 PCI (00|00:1D.07) : 8086 3A3A class=0C0320 3:170 0:000 PCI (00|00:1E.00) : 8086 244E class=060401 3:170 0:000 PCI (00|00:1F.00) : 8086 3A16 class=060100 3:170 0:000 PCI (00|00:1F.02) : 8086 3A22 class=010601 3:170 0:000 PCI (00|00:1F.03) : 8086 3A30 class=0C0500 3:170 0:000 === [ GetDefaultSettings ] ================================ 3:170 0:000 Clover load options size = 0 bytes 3:172 0:001 , Status=Success 3:172 0:000 EFI\CLOVER\config.plist loaded: Success 3:172 0:000 === [ GetListOfThemes ] =================================== 3:174 0:001 - [00]: applestyle 3:176 0:002 - [01]: BGM 3:181 0:004 - [02]: BGM256 3:183 0:002 - [03]: black_green 3:185 0:001 - [04]: bluemac 3:187 0:001 - [05]: bootcamp 3:187 0:000 - [06]: chrome 3:189 0:001 - [07]: CloverX 3:190 0:000 - [08]: dawn 3:191 0:001 - [09]: embedded 3:191 0:000 - [09]: gold_clover 3:193 0:001 - [10]: iclover 3:194 0:000 - [11]: ios7 3:196 0:002 - [12]: magnifico 3:197 0:000 - [13]: metal 3:199 0:002 - [14]: orange 3:199 0:000 - [15]: os_box 3:200 0:000 - [16]: os_one 3:201 0:000 - [17]: random 3:201 0:000 - [17]: Shield 3:207 0:006 - [18]: sketched 3:209 0:001 - [19]: Space 3:211 0:002 - [20]: steampunkblack 3:214 0:002 - [21]: thinkpad 3:217 0:002 - [22]: yosemitelogin 3:219 0:002 === [ GetEarlyUserSettings ] ============================== 3:219 0:000 timeout set to 3 3:219 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 3:231 0:011 KextsToPatch: 4 requested 3:235 0:004 - [00]: AppleHDA (t1-10.12-AppleHDA/Realtek ALC...) :: BinPatch :: data len: 4 3:252 0:017 - [01]: AppleHDA (t1-10.9-10.12-AppleHDA/Realtek ALC888) :: BinPatch :: data len: 4 3:273 0:020 - [02]: AppleHDA (t1-AppleHDA/Resources/xml>zml) :: BinPatch :: data len: 6 3:289 0:016 - [03]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8 3:304 0:015 Default theme: applestyle 3:308 0:003 Hiding entries with string Windows 3:312 0:003 Hiding entries with string \EFI\BOOT\BOOTX64.EFI 3:316 0:003 === [ LoadDrivers ] ======================================= 3:492 0:175 Loading FSInject-64.efi status=Success 3:505 0:013 === [ InitScreen ] ======================================== 3:676 0:171 SetScreenResolution: 1920x1080 - not found! 3:684 0:007 Console modes reported: 4, available modes: 3:688 0:003 - [01]: 80x25 3:692 0:004 - [03]: 100x31 3:696 0:004 - [04]: 128x40 (current mode) 3:701 0:004 SetScreenResolution: 1024x768 - already set 3:709 0:008 reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(1,GPT,2B5B840C-D435-4234-9D02-EB1F29721220,0x28,0x64000) 3:715 0:005 === [ GetMacAddress ] ===================================== 3:886 0:170 get legacy LAN MAC, 1 card found 3:890 0:004 Legacy MAC address of LAN #0= 00:25:11:07:05:E6: 3:921 0:030 === [ ScanSPD ] =========================================== 4:104 0:183 SMBus device : 8086 3A30 class=0C0500 status=Success 4:108 0:003 SMBus CmdReg: 0x3 4:112 0:003 Scanning SMBus [8086:3A30], mmio: 0xFCFFF004, ioport: 0x400, hostc: 0x1 4:116 0:003 Slots to scan [8]... 4:120 0:004 SPD[0]: Type 8 @0x50 4:129 0:008 DDR speed 800MHz 4:136 0:006 Slot: 0 Type 19 2048MB 800MHz Vendor=NoName PartNo= SerialNo=0000000000000000 4:141 0:004 SPD[2]: Type 8 @0x52 4:149 0:008 DDR speed 800MHz 4:153 0:003 Slot: 2 Type 19 2048MB 800MHz Vendor=NoName PartNo= SerialNo=0000000000000000 4:158 0:004 === [ GetAcpiTablesList ] ================================= 4:299 0:140 Get Acpi Tables List from RSDT: 4:307 0:008 - [00]: FACP FACP1005 len=132 4:312 0:004 - [01]: APIC APIC1005 len=108 4:322 0:010 - [02]: MCFG OEMMCFG len=60 4:331 0:008 - [03]: SLIC ACRPRDCT len=374 4:335 0:003 - [04]: OEMB OEMB1005 len=114 4:339 0:004 - [05]: HPET OEMHPET len=56 4:344 0:004 - [06]: ASF! I865PASF len=153 4:348 0:004 - [07]: GSCI GMCHSCI len=8228 4:353 0:004 - [08]: AWMI OEMB1005 len=78 4:357 0:004 - [09]: SSDT CpuPm len=2684 4:361 0:004 Calibrated TSC frequency =2499959657 =2499MHz 4:365 0:004 === [ GetUserSettings ] =================================== 4:513 0:147 USB FixOwnership: no 4:520 0:006 - final DSDT Fix mask=00009051 4:524 0:004 ChassisType: 0xD 4:528 0:003 Using smbios.plist at path: EFI\CLOVER\smbios.plist, Status=Not Found 4:537 0:009 === [ ScanVolumes ] ======================================= 4:703 0:165 Found 4 volumes with blockIO 4:707 0:004 - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0) 4:716 0:008 Result of bootcode detection: bootable unknown (legacy) 4:720 0:003 - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(1,GPT,2B5B840C-D435-4234-9D02-EB1F29721220,0x28,0x64000) 4:732 0:012 Result of bootcode detection: bootable Clover (clover) 4:736 0:003 This is SelfVolume !! 4:740 0:004 - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(2,GPT,D08DF806-FCB8-4CA8-A7CB-F91AF42FD358,0x64028,0x1BD8A540) 4:749 0:008 - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(3,GPT,5138193F-97CB-4E92-BEDA-3836A35AB7D3,0x1BDEE568,0x135F20) 4:759 0:010 PutNvramPlistToRtVars: nvram.plist not found 4:766 0:006 === [ InitTheme ] ========================================= 4:949 0:182 Using theme 'applestyle' (EFI\CLOVER\themes\applestyle) 4:955 0:006 Choosing theme applestyle 4:959 0:003 after NVRAM boot-args=dart=0 4:963 0:003 === [ AddCustomLegacy ] =================================== 5:113 0:149 Scanning legacy ... 5:117 0:004 0: 'Whole Disc Boot' (legacy) not legacy 5:125 0:007 1: 'EFI' (clover) add legacy 5:138 0:013 added 'Boot Clover from EFI' OSType=3 Icon=clover 5:145 0:007 2: 'Sierra' (legacy) not legacy 5:154 0:008 3: 'Recovery HD' (legacy) not legacy 5:162 0:008 === [ ScanLoader ] ======================================== 5:337 0:175 - [01]: 'EFI' 5:346 0:008 - [02]: 'Sierra' 5:356 0:010 AddLoaderEntry for Volume Name=Sierra 5:362 0:005 Check if volume Is Hibernated: 5:366 0:003 Check sleep image 'by signature': 5:373 0:006 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found 5:380 0:006 using default sleep image name = \private\var\vm\sleepimage 5:387 0:007 Reading first 512 bytes of sleepimage ... 5:391 0:004 OurBlockIoRead: Lba=3185120, Offset=630A24000 (BlockSize=512) 5:395 0:003 sig lion: F5343EA2 5:399 0:004 sig snow: 0 5:403 0:004 no valid sleep image offset was found 5:407 0:003 Reading completed -> Success 5:411 0:003 sleepimage offset could not be acquired 5:415 0:004 hibernated: no - sign 5:424 0:008 - [03]: 'Recovery HD' 5:432 0:008 AddLoaderEntry for Volume Name=Recovery HD 5:438 0:005 === [ AddCustomTool ] ===================================== 5:596 0:157 found tool \EFI\CLOVER\tools\Shell64U.efi 5:600 0:003 Checking EFI partition Volume 1 for Clover 5:603 0:003 Found Clover 5:610 0:006 === [ FindDefaultEntry ] ================================== 5:757 0:146 === [ GetEfiBootDeviceFromNvram ] ========================= 5:872 0:114 - found entry 1. 'Boot Mac OS X from Sierra', Volume 'Sierra', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(2,GPT,D08DF806-FCB8-4CA8-A7CB-F91AF42FD358,0x64028,0x1BD8A540)\System\Library\CoreServices\boot.efi' 5:879 0:007 DefaultIndex=1 and MainMenu.EntryCount=9 6:103 0:223 Found Mouse device: 6:117 0:014 GUI ready 10:329 4:212 === [ StartLoader ] ======================================= 10:506 0:176 Finally: Bus=333327kHz CPU=2500MHz 10:510 0:004 Loading boot.efi status=Success 10:579 0:068 GetOSVersion: 10.12 (16A323) 10:587 0:007 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM 10:591 0:004 Filtering KextPatches: 10:595 0:003 - [00]: AppleHDA (t1-10.12-AppleHDA/Realtek ALC...) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed 10:603 0:007 - [01]: AppleHDA (t1-10.9-10.12-AppleHDA/Realtek ALC888) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed 10:614 0:011 - [02]: AppleHDA (t1-AppleHDA/Resources/xml>zml) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed 10:622 0:008 - [03]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed 10:630 0:008 === [ PatchSmbios ] ======================================= 10:800 0:169 insert table 9 for dev 0:0 10:804 0:004 insert table 9 for dev 0:1 10:808 0:004 insert table 9 for dev 19:0 10:814 0:005 Channels: 2 10:821 0:006 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 10:926 0:105 SMBIOS Type 17 Index = 0 => 0 0: 10:930 0:004 BANK0 DIMM0 800MHz 2048MB 10:934 0:003 SMBIOS Type 17 Index = 1 => 2 2: 10:938 0:003 BANK1 DIMM0 800MHz 2048MB 10:942 0:003 SMBIOS Type 17 Index = 2 => 1 1: 10:945 0:003 BANK0 DIMM1 EMPTY 10:949 0:003 SMBIOS Type 17 Index = 3 => 3 3: 10:953 0:003 BANK1 DIMM1 EMPTY 10:957 0:003 mTotalSystemMemory = 4096 10:962 0:004 NumberOfMemoryDevices = 4 10:969 0:007 Type20[0]->End = 0x1FFFFF, Type17[0] = 0x800 10:973 0:004 Type20[1]->End = 0x0, Type17[1] = 0x1800 10:977 0:003 Table 131 is present, CPUType=20 10:981 0:003 Change to: 402 10:985 0:003 === [ PatchACPI ] ========================================= 11:160 0:175 RSDT 0xBFF90000 11:164 0:003 FADT from RSDT: 0xBFF90200 11:167 0:003 Xsdt is not found! Creating new one 11:171 0:003 RsdPointer is Acpi 1.0 - creating new one Acpi 2.0 11:175 0:003 RsdPointer Acpi 2.0 installed 11:182 0:007 RSDT entries = 10 11:186 0:004 Xsdt reallocation done 11:190 0:003 old FADT length=84 11:194 0:004 Apply DsdtFixMask=0x00009051 old way 11:199 0:004 drop _DSM mask=0x0000 11:202 0:003 === [ FixBiosDsdt ] ======================================= 11:375 0:173 VideoCard devID=0xA6510DE 11:379 0:003 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0 11:383 0:004 USBADR[0] = 0x1A0000 and PCIe = 0xFFFE 11:387 0:003 USBADR[1] = 0x1A0001 and PCIe = 0xFFFE 11:394 0:007 USBADR[2] = 0x1A0002 and PCIe = 0xFFFE 11:399 0:004 USBADR[3] = 0x1A0007 and PCIe = 0xFFFE 11:403 0:004 Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1) 11:407 0:004 USBADR[4] = 0x1D0000 and PCIe = 0xFFFE 11:411 0:004 USBADR[5] = 0x1D0001 and PCIe = 0xFFFE 11:416 0:004 USBADR[6] = 0x1D0002 and PCIe = 0xFFFE 11:420 0:003 USBADR[7] = 0x1D0007 and PCIe = 0xFFFE 11:423 0:003 first CPU found at 2B offset 2E 11:427 0:003 score candidate at 27 11:431 0:003 score inserted in acpi_cpu_score _PR_ 11:438 0:006 Found ACPI CPU: P001 | P002 | P003 | P004 , within the score: _PR_ 11:458 0:020 Found PCIROOTUID = 0 11:462 0:003 Start RTC Fix 11:466 0:003 found RTC had IRQNoFlag will move -3 bytes 11:469 0:003 ...len=6C6F 11:473 0:003 new size written to 10C1 shift=0 len=6C6F 11:477 0:003 len after correct outers 6C6F 11:481 0:003 Start TMR Fix 11:485 0:004 Start PIC Fix 11:490 0:004 PIC size=2B at 101D 11:494 0:004 found PIC had IRQNoFlag will move -3 bytes 11:502 0:007 Fix Device PIC size -3 11:506 0:003 Start HPET Fix 11:510 0:004 patch HDEF in DSDT 11:514 0:003 Start HDA Fix 11:518 0:004 Start Add Device HDEF 11:522 0:004 Start USB Fix 11:527 0:004 USB bridge[1A0000] at 47D4, size = E6 11:531 0:004 USB bridge[1A0001] at 490D, size = E6 11:536 0:004 USB bridge[1A0002] at 4A46, size = E6 11:540 0:004 USB bridge[1A0007] at 4B7F, size = 165 11:544 0:004 USB bridge[1D0000] at 42CD, size = E6 11:548 0:003 USB bridge[1D0001] at 4406, size = E6 11:555 0:007 USB bridge[1D0002] at 453F, size = E6 11:560 0:004 USB bridge[1D0007] at 4760, size = 165 11:564 0:004 === [ ACPIDropTables ] ==================================== 11:717 0:153 === [ PatchAllSSDT ] ====================================== 11:885 0:167 Patch table: SSDT CpuPm 11:889 0:004 SSDT len = 0xA7C 11:894 0:004 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0 11:898 0:004 Xsdt has tables count=10 11:902 0:004 corrected XSDT length=116 11:910 0:007 CPUBase=1 and ApicCPUBase=1 ApicCPUNum=4 11:913 0:003 === [ RestSetupOSX ] ====================================== 12:076 0:162 mem_detected 1073741824 12:080 0:003 read_nVidia_ROM 12:084 0:003 Using PRAMIN fixups 12:215 0:130 version 70.18.5E.00.00 12:218 0:003 nVidia MSI GeForce 210 1024MB NVA8 [10DE:0A65] :: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0) => device #1 12:226 0:007 Nvidia: VideoPorts: undefined, default to: 2 12:234 0:007 default NVCAP: 04000000-00000600-09000000-00000007-00000000 12:241 0:007 HDA Controller [8086:3A3E] :: PcieRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1) 12:249 0:007 stringlength = 2084 12:253 0:003 CurrentMode: Width=1024 Height=768 12:257 0:003 Beginning FSInjection FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BE881718 FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BE881718 12:262 0:004 ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) ! 12:267 0:005 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other 12:273 0:006 Extra kext: EFI\CLOVER\kexts\Other\realtekALC.kext 12:282 0:009 Custom boot is disabled Clover config.plist (I X'ed out serials) <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>ACPI</key> <dict> <key>DSDT</key> <dict> <key>Debug</key> <false/> <key>DropOEM_DSM</key> <false/> <key>Fixes</key> <dict> <key>AddDTGP_0001</key> <true/> <key>FixHDA_8000</key> <true/> <key>FixHPET_0010</key> <true/> <key>FixIPIC_0040</key> <true/> <key>FixUSB_1000</key> <true/> </dict> <key>Name</key> <string>DSDT.aml</string> <key>ReuseFFFF</key> <false/> </dict> <key>SSDT</key> <dict> <key>DropOem</key> <false/> <key>Generate</key> <false/> </dict> </dict> <key>Boot</key> <dict> <key>Arguments</key> <string>dart=0</string> <key>Debug</key> <true/> <key>DefaultVolume</key> <string>Sierra</string> <key>Legacy</key> <string>PBR</string> <key>Secure</key> <false/> <key>Timeout</key> <integer>3</integer> <key>XMPDetection</key> <false/> </dict> <key>CPU</key> <dict> <key>UseARTFrequency</key> <false/> </dict> <key>Devices</key> <dict> <key>Audio</key> <dict> <key>Inject</key> <string>1</string> </dict> <key>FakeID</key> <dict> <key>ATI</key> <string>0x0</string> <key>IMEI</key> <string>0x0</string> <key>IntelGFX</key> <string>0x0</string> <key>LAN</key> <string>0x0</string> <key>NVidia</key> <string>0x0</string> <key>SATA</key> <string>0x0</string> <key>WIFI</key> <string>0x0</string> <key>XHCI</key> <string>0x0</string> </dict> <key>USB</key> <dict> <key>FixOwnership</key> <false/> <key>Inject</key> <false/> </dict> </dict> <key>DisableDrivers</key> <array> <string>Nothing</string> </array> <key>GUI</key> <dict> <key>Hide</key> <array> <string>Windows</string> <string>\EFI\BOOT\BOOTX64.EFI</string> </array> <key>Language</key> <string>en:0</string> <key>Mouse</key> <dict> <key>DoubleClick</key> <integer>500</integer> <key>Enabled</key> <true/> <key>Mirror</key> <false/> <key>Speed</key> <integer>8</integer> </dict> <key>Scan</key> <dict> <key>Entries</key> <true/> <key>Legacy</key> <string>First</string> <key>Linux</key> <false/> <key>Tool</key> <true/> </dict> <key>ScreenResolution</key> <string>1920x1080</string> <key>Theme</key> <string>applestyle</string> </dict> <key>Graphics</key> <dict> <key>Inject</key> <dict> <key>ATI</key> <false/> <key>Intel</key> <false/> <key>NVidia</key> <true/> </dict> <key>NvidiaSingle</key> <false/> </dict> <key>KernelAndKextPatches</key> <dict> <key>AppleRTC</key> <true/> <key>AsusAICPUPM</key> <true/> <key>Debug</key> <false/> <key>KernelCpu</key> <false/> <key>KernelHaswellE</key> <false/> <key>KernelLapic</key> <false/> <key>KernelPm</key> <true/> <key>KextsToPatch</key> <array> <dict> <key>Comment</key> <string>t1-10.12-AppleHDA/Realtek ALC...</string> <key>Find</key> <data> ihnUEQ== </data> <key>Name</key> <string>AppleHDA</string> <key>Replace</key> <data> AAAAAA== </data> </dict> <dict> <key>Comment</key> <string>t1-10.9-10.12-AppleHDA/Realtek ALC888</string> <key>Find</key> <data> ixnUEQ== </data> <key>Name</key> <string>AppleHDA</string> <key>Replace</key> <data> iAjsEA== </data> </dict> <dict> <key>Comment</key> <string>t1-AppleHDA/Resources/xml>zml</string> <key>Find</key> <data> eG1sLnps </data> <key>Name</key> <string>AppleHDA</string> <key>Replace</key> <data> em1sLnps </data> </dict> <dict> <key>Comment</key> <string>External icons patch</string> <key>Disabled</key> <false/> <key>Find</key> <data> RXh0ZXJuYWw= </data> <key>Name</key> <string>AppleAHCIPort</string> <key>Replace</key> <data> SW50ZXJuYWw= </data> </dict> </array> </dict> <key>RtVariables</key> <dict> <key>ROM</key> <string>UseMacAddr0</string> </dict> <key>SMBIOS</key> <dict> <key>BiosReleaseDate</key> <string>03/25/10</string> <key>BiosVendor</key> <string>Apple Inc.</string> <key>BiosVersion</key> <string>MBP71.88Z.0039.B05.1003251322</string> <key>Board-ID</key> <string>Mac-F222BEC8</string> <key>BoardManufacturer</key> <string>Apple Inc.</string> <key>BoardSerialNumber</key> <string>XXXXXXXXXXXXXXXXXXX</string> <key>BoardType</key> <integer>10</integer> <key>BoardVersion</key> <string>MacBookPro7,1</string> <key>ChassisAssetTag</key> <string>MacBook-Aluminum</string> <key>ChassisManufacturer</key> <string>Apple Inc.</string> <key>ChassisType</key> <string>13</string> <key>Family</key> <string>MacBook Pro</string> <key>LocationInChassis</key> <string>Part Component</string> <key>Manufacturer</key> <string>Apple Inc.</string> <key>Mobile</key> <false/> <key>ProductName</key> <string>MacBookPro7,1</string> <key>SerialNumber</key> <string>XXXXXXXXXXXX</string> <key>SmUUID</key> <string>XXXXXXXXXXXX</string> <key>Trust</key> <false/> <key>Version</key> <string>1.0</string> </dict> <key>SystemParameters</key> <dict> <key>InjectKexts</key> <string>YES</string> <key>InjectSystemID</key> <true/> </dict> </dict> </plist> ioreg.ioreg.txt AppleHDA.kext.zip
  2. bbddpp

    Mavericks Realtek ALC AppleHDA Audio

    Well, that just bites. I assume if there was a way to make that work by now you'd have figured it out. I can try seeing if the BIOS has any revisions but I think I'm on the last one, and they're not doing any more. Bummer. Are there any cheap usb dongles that work with AppleHDA and your kexts? I have just found that Voodoo is so choppy though maybe it's gotten better lately.
  3. bbddpp

    Mavericks Realtek ALC AppleHDA Audio

    Toleda, Hi... I've attached my Clover boot config and the AppleHDA from S/L/E which should be your modded ALC888 one (via the 888_v100202 script). I also attached my IOReg and my Clover boot log. Can you let me know if anything looks out of place? I don't use any other enabler kexts, only change to system is your AppleHDA (assuming the script worked which it looks like it did). Much thanks. Willing to try anything to get sound working for ALC888 and AppleHDA and not use Voodoo which always seemed buggy on my rig. I might be missing something obvious hence the reason I attached that extra detail. Still a novice at Clover config. B. toleda-bbddpp.zip
  4. bbddpp

    Mavericks Realtek ALC AppleHDA Audio

    Toleda, Thanks, that's weird -- I didn't touch any kexts but only changed the Clover config to boot. Haven't touched the kexts at all. Pardon my ignorance, but what is the difference between 3 port audio and the other? My output in the back of the PC has 6 mini ports - colored orange blue black green grey pink. I'm only plugged into the green and black though. Does that help? I don't care about the HDMI audio for the nvidia card at all, I just want some old school speakers to put out sound via the mini jacks of the onboard sound controller. Following your instructions, it looks like I have both AppleHDA.kext in my S/L/E folder as well as a copy on the desktop in the audio_ALC888 folder. Should I maybe attach both kexts so you can compare? It would be interesting to see...I didn't do anything to inject any kexts into S/L/E unless your Mavericks command script did. I am trying to remain as pure as possible so future OS upgrades mostly work with just a few minor fixes. Still I realize AppleHDA probably needs to be in S/L/E. I am a PC tech so I am pretty savvy with this stuff, I can work through it with you if you would be willing to stick with me. Though I also realize that ALC888VC may just be impossible to get to work with AppleHDA and if so let me know if I am wasting my time, too. I will experiment with Voodoo then..I if HAVE to. Thank you!
  5. bbddpp

    Mavericks Realtek ALC AppleHDA Audio

    Toleda, so great to hear from you! I imagine you are a busy guy plus all the help you get asked for around here so I thank you for taking the time to look at this and reply. Okay, I set the Inejct string to 1 and it looks like it's now set that way in system info. Attached a new ioreg for you to see. So hopefully at least my Clover syntax is right. Still not sure about setting that variable to something other than 1, like I see other choices are 2, 3, and 12 (?) but not sure how to know which to set. I can try them all if you think it might be useful. The attached AppleHDA to the previous post should have been your patched one patched with 888_v100202, but if that looked wrong let me know and I'll re-try it. I grabbed the one from the Desktop folder called audio_ALC888 (not the original, the other one). I'm ASSUMING that the 888 is what I have because that's what the motherboard specs say, but is there any other way to confirm it? I believe specs say ALC888S. I'd love to find a way to fix this even if it means trying a different BIOS. Would rather not use Voodoo and all the issues, static, etc that come with it. Again thanks, would be great to get this working. Other than a few network related stalls when I boot, I actually have the system working well except for audio. This is the final piece! ioreg-toleda-new.zip
  6. bbddpp

    Mavericks Realtek ALC AppleHDA Audio

    Hi Toleda, Thanks so much for all you do for this cause. I'm struggling a bit here under Mavericks still and was hoping you could help out. I am booting with the latest Clover on a fairly old (around 2009) motherboard. Have not tweaked the config of Clover much for audio other than to turn inject on with the "detect" option set to yes. No custom HDA kexts at all other than an attempt to run the audio_ALC888 script which replaced AppleHDA with a patched version for Mavericks 10.9 (I grabbed your latest). No HDAEnabler kext installed/injected anywhere. Motherboard is G45T-M2 with an 8 channel Realtek ALC888 on board. I also have an Nvidia graphics card in there which may be interfering trying to get its HDMI audio working though all I see are airplay devices under Sound. 10.9/G4T-M2/Core 2 Duo Intel/Nvidia 210 Graphics Used audio_ALC888 procedure and guide for Mavericks plus clover config settings Patched S/L/E/AppleHDA,kext attached in zip No dsdt.aml installed. Copy of IOReg - IOReg/File/Save a Copy As…, verify file (not ioreg.txt), see Tools 3. attached in zip Console/All Messages/kernel Sound assertions selected/Save Selection As….. attached as screenshot, zip Screenshot of System Information/Hardware/Audio/Intel High Definition Audio (not Devices) attached in zip fortoleda.zip
  7. bbddpp

    Realtek ALC AppleHDA Audio Injection

    motherboard is a G45T-M2. It's a stock Acer desktop era 2009. DCPI manager reported ALC888S. If that's really what I have and you are telling me there is no way to get audio I can stop the pursuit. Is that the case? I did have VoodooHDA working poorly on Lion but never AppleHDA. Was hoping your files might help.
  8. bbddpp

    Realtek ALC AppleHDA Audio Injection

    Toleda, Thanks so much for responding! It's an honor to hear from you. I have no kexts loaded at all as I was reading that Clover doesn't require any, but I could be mistaken. So no AppleHDA or ALC kexts at all anywhere. I've attached my IOReg here: http://www.sendspace.com/file/xa737s Please let me know what else I can supply in the hopes of troubleshooting my ALC888S. Using the latest Clover with the following in the config (I have tried booting with detect set to 1, 2 or 3 with the same results): <key>FixHDA_8000</key> <true/> ... <dict> <key>Inject</key> <false/> <key>Audio</key> <dict> <key>Inject</key> <string>Detect</string> </dict> I'm trying to keep the desktop as Vanilla as possible so the only kext I loaded was FakeSMC.kext, the rest I let Clover load on the fly (did not create my own DSDT). What other things, like screenshots, can I show you that might allow you to help? Thanks so much.
  9. bbddpp

    Realtek ALC AppleHDA Audio Injection

    Toleda, I also want to thank you for the incredible amount of work you have put into this project. Hoping you might be able to help me out as well if you get a moment. I'm using a fresh install of Mavericks and Clover 2236 to boot EFI on a 2009 era Acer system, motherboard is a G45T-M2. Also similar to the poster above... -I'm using clover r2236: In config.plist/ACPI/DSDT/Fixes/FixHDA_8000 - YES In Devices/Audio/Inject - 1 I let clover apply the fixes on the fly and don't have any DSDT present. I don't drop any SSDT tables. DCPI Manager reports my card as Realtek ALC88S-VD, Audio Device 0x80863A3E, Sub Device 0x10250152, Codec 0x10EC0888, Revision 0x202. I've tried all 3 injections (1-2-3) in Clover to no avail. I also now see a "Null Codec" as well as an NVidia GT21x HDMI Codec (repeating 4 times) since I switched to Clover. Still no devices listed for output other than Airplay. HDEF looks correct in IOReg. What do you need me to attach as evidence or anything that might help troubleshoot?
×