Jump to content
InsanelyMac Forum

starikarp

Members
  • Content count

    6
  • Joined

  • Last visited

About starikarp

  • Rank
    InsanelyMac Protégé
  1. starikarp

    sound settings - help

    Hi! As I wrote before, I successfully installed FreeBSD on iMac 11,1 but I "playing" with sound settings still. cat /dev/sndstat Installed devices: pcm0: <ATI R6xx (HDMI)> (play) pcm1: <Cirrus Logic CS4206 (Internal Analog 4.0/2.0)> (play/rec) default pcm2: <Cirrus Logic CS4206 (Rear Analog)> (play/rec) pcm3: <Cirrus Logic CS4206 (Rear Digital)> (play/rec) I put hw.snd.default_unit=1/2/3 in sysctl.conf and it works just UNIT=2 but it works just with headphones and microphone doesn't work. I did boot verbose and I gor: hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 hdaa0: Subsystem ID: 0x00aa0100 hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 hdaa0: Original pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 3 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0 hdaa0: Patched pins configuration: hdaa0: nid 0x as seq device conn jack loc color misc hdaa0: 3 18560010 1 0 Digital-out Jack Digital 0x18 Unknown 0 hdaa0: 1 associations found: hdaa0: Association 0 (1) out: hdaa0: Pin nid=3 seq=0 hdaa0: Tracing association 0 (1) hdaa0: Pin 3 traced to DAC 2 hdaa0: Association 0 (1) trace succeeded hdaa0: Looking for additional DAC for association 0 (1) hdaa0: Tracing input monitor hdaa0: Tracing other input monitors hdaa0: Tracing beeper hdaa0: Pin sense: nid=3 sense=0x7fffffff (disconnected, ELD valid) hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm0: Playback: pcm0: Stream cap: 0x00000005 AC3 PCM pcm0: PCM cap: 0x00020070 16 bits, 32 44 48 KHz pcm0: DAC: 2 pcm0: pcm0: nid=3 [pin: Digital-out (Jack)] pcm0: + <- nid=2 [audio output] [src: pcm] pcm0: pcm0: Mixer "vol" -> "none": child=0x00000010 pcm0: Mixer "pcm": parent="vol" pcm0: Soft PCM mixer ENABLED pcm0: Playback channel set is: Front Left, Front Right, pcm0: Playback channel matrix is: 2.0 (disconnected) hdacc1: <Cirrus Logic CS4206 HDA CODEC> at cad 0 on hdac1 hdaa1: <Cirrus Logic CS4206 Audio Function Group> at nid 1 on hdacc1 hdaa1: Subsystem ID: 0x106b5100 hdaa1: NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0 hdaa1: GPIO0: disabled hdaa1: GPIO1: disabled hdaa1: GPIO2: disabled hdaa1: GPIO3: output state=0 hdaa1: Original pins configuration: hdaa1: nid 0x as seq device conn jack loc color misc hdaa1: 9 012b4050 5 0 Headphones Jack Combo Rear Green 0 hdaa1: 10 90100140 4 0 Speaker Fixed Unknown Internal Unknown 1 hdaa1: 11 90100142 4 2 Speaker Fixed Unknown Internal Unknown 1 hdaa1: 12 018b3020 2 0 Line-in Jack Combo Rear Blue 0 hdaa1: 13 90a00110 1 0 Mic Fixed Unknown Internal Unknown 1 hdaa1: 14 400000f0 15 0 Line-out None Unknown 0x00 Unknown 0 hdaa1: 15 01cbe030 3 0 SPDIF-in Jack Combo Rear White 0 hdaa1: 16 014be060 6 0 SPDIF-out Jack Combo Rear White 0 hdaa1: 18 400000f0 15 0 Line-out None Unknown 0x00 Unknown 0 hdaa1: 21 400000f0 15 0 Line-out None Unknown 0x00 Unknown 0 hdaa1: Patched pins configuration: hdaa1: nid 0x as seq device conn jack loc color misc hdaa1: 9 012b4050 5 0 Headphones Jack Combo Rear Green 0 hdaa1: 10 90100140 4 0 Speaker Fixed Unknown Internal Unknown 1 hdaa1: 11 90100142 4 2 Speaker Fixed Unknown Internal Unknown 1 hdaa1: 12 018b3020 2 0 Line-in Jack Combo Rear Blue 0 hdaa1: 13 90a00110 1 0 Mic Fixed Unknown Internal Unknown 1 hdaa1: 14 400000f0 15 0 Line-out None Unknown 0x00 Unknown 0 DISA hdaa1: 15 01cbe030 3 0 SPDIF-in Jack Combo Rear White 0 hdaa1: 16 014be060 6 0 SPDIF-out Jack Combo Rear White 0 hdaa1: 18 400000f0 15 0 Line-out None Unknown 0x00 Unknown 0 DISA hdaa1: 21 400000f0 15 0 Line-out None Unknown 0x00 Unknown 0 DISA hdaa1: 6 associations found: hdaa1: Association 0 (1) in: hdaa1: Pin nid=13 seq=0 hdaa1: Association 1 (2) in: hdaa1: Pin nid=12 seq=0 hdaa1: Association 2 (3) in: hdaa1: Pin nid=15 seq=0 hdaa1: Association 3 (4) out: hdaa1: Pin nid=10 seq=0 hdaa1: Pin nid=11 seq=2 hdaa1: Association 4 (5) out: hdaa1: Pin nid=9 seq=0 hdaa1: Association 5 (6) out: hdaa1: Pin nid=16 seq=0 hdaa1: Tracing association 0 (1) hdaa1: Unable to trace pin 13 to ADC 5, undo traces hdaa1: Pin 13 traced to ADC 6 hdaa1: Association 0 (1) trace succeeded hdaa1: Tracing association 1 (2) hdaa1: Pin 12 traced to ADC 5 hdaa1: Association 1 (2) trace succeeded hdaa1: Tracing association 2 (3) hdaa1: Pin 15 traced to ADC 7 hdaa1: Association 2 (3) trace succeeded hdaa1: Tracing association 3 (4) hdaa1: Pin 10 traced to DAC 3 hdaa1: Pin 11 traced to DAC 4 hdaa1: Association 3 (4) trace succeeded hdaa1: Tracing association 4 (5) hdaa1: Pin 9 traced to DAC 2 hdaa1: Association 4 (5) trace succeeded hdaa1: Tracing association 5 (6) hdaa1: Pin 16 traced to DAC 8 hdaa1: Association 5 (6) trace succeeded hdaa1: Looking for additional ADC for association 0 (1) hdaa1: Looking for additional ADC for association 1 (2) hdaa1: Looking for additional ADC for association 2 (3) hdaa1: Looking for additional DAC for association 3 (4) hdaa1: Looking for additional DAC for association 4 (5) hdaa1: Looking for additional DAC for association 5 (6) hdaa1: Tracing input monitor hdaa1: Tracing other input monitors hdaa1: Tracing nid 12 to out hdaa1: Tracing nid 13 to out hdaa1: Tracing nid 15 to out hdaa1: Tracing beeper hdaa1: Pin sense: nid=9 sense=0x80000000 (connected) hdaa1: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref pcm1: <Cirrus Logic CS4206 (Internal Analog 4.0/2.0)> at nid 10,11 and 13 on hdaa1 pcm1: Playback: pcm1: Stream cap: 0x00000003 FLOAT32 PCM pcm1: PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz pcm1: DAC: 3 4 pcm1: pcm1: nid=10 [pin: Speaker (Fixed)] pcm1: + <- nid=3 [audio output] [src: pcm] pcm1: pcm1: nid=11 [pin: Speaker (Fixed)] pcm1: + <- nid=4 [audio output] [src: pcm] pcm1: pcm1: Record: pcm1: Stream cap: 0x00000003 FLOAT32 PCM pcm1: PCM cap: 0x001e01f5 16 20 24 32 bits, 8 16 32 44 48 88 96 KHz pcm1: ADC: 6 pcm1: pcm1: nid=6 [audio input] pcm1: + <- nid=13 [pin: Mic (Fixed)] [src: monitor] pcm1: pcm1: Master Volume (OSS: vol): -57/6dB pcm1: +- ctl 2 (nid 3 out): -57/6dB (128 steps) + mute pcm1: +- ctl 3 (nid 4 out): -57/6dB (128 steps) + mute pcm1: pcm1: PCM Volume (OSS: pcm): -57/6dB pcm1: +- ctl 2 (nid 3 out): -57/6dB (128 steps) + mute pcm1: +- ctl 3 (nid 4 out): -57/6dB (128 steps) + mute pcm1: pcm1: Microphone2 Volume (OSS: monitor): 0/30dB pcm1: +- ctl 5 (nid 6 in 0): -51/12dB (64 steps) + mute pcm1: +- ctl 7 (nid 13 out): 0/30dB (4 steps) pcm1: pcm1: Recording Level (OSS: rec): -51/12dB pcm1: +- ctl 5 (nid 6 in 0): -51/12dB (64 steps) + mute pcm1: +- ctl 7 (nid 13 out): 0/30dB (4 steps) pcm1: pcm1: Mixer "vol": pcm1: Mixer "pcm": pcm1: Mixer "rec": pcm1: Mixer "monitor": pcm1: Playback channel set is: Front Left, Front Right, Back Left, Back Right, pcm1: Playback channel matrix is: 4.0 (unknown) pcm1: Automatically set rec source to: monitor pcm1: Recording channel set is: Front Left, Front Right, pcm1: Recording channel matrix is: 2.0 (unknown) pcm2: <Cirrus Logic CS4206 (Rear Analog)> at nid 9 and 12 on hdaa1 pcm2: Playback: pcm2: Stream cap: 0x00000003 FLOAT32 PCM pcm2: PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz pcm2: DAC: 2 pcm2: pcm2: nid=9 [pin: Headphones (Green Jack)] pcm2: + <- nid=2 [audio output] [src: pcm] pcm2: pcm2: Record: pcm2: Stream cap: 0x00000003 FLOAT32 PCM pcm2: PCM cap: 0x001e01f5 16 20 24 32 bits, 8 16 32 44 48 88 96 KHz pcm2: ADC: 5 pcm2: pcm2: nid=5 [audio input] pcm2: + <- nid=12 [pin: Line-in (Blue Jack)] [src: line] pcm2: pcm2: Master Volume (OSS: vol): -57/6dB pcm2: +- ctl 1 (nid 2 out): -57/6dB (128 steps) + mute pcm2: pcm2: PCM Volume (OSS: pcm): -57/6dB pcm2: +- ctl 1 (nid 2 out): -57/6dB (128 steps) + mute pcm2: pcm2: Line-in Volume (OSS: line): 0/30dB pcm2: +- ctl 4 (nid 5 in 0): -51/12dB (64 steps) + mute pcm2: +- ctl 6 (nid 12 out): 0/30dB (4 steps) pcm2: pcm2: Recording Level (OSS: rec): -51/12dB pcm2: +- ctl 4 (nid 5 in 0): -51/12dB (64 steps) + mute pcm2: +- ctl 6 (nid 12 out): 0/30dB (4 steps) pcm2: pcm2: Mixer "vol": pcm2: Mixer "pcm": pcm2: Mixer "line": pcm2: Mixer "rec": pcm2: Playback channel set is: Front Left, Front Right, pcm2: Playback channel matrix is: 2.0 (connected) pcm2: Recording channel set is: Front Left, Front Right, pcm2: Recording channel matrix is: 2.0 (disconnected) pcm3: <Cirrus Logic CS4206 (Rear Digital)> at nid 16 and 15 on hdaa1 pcm3: Playback: pcm3: Stream cap: 0x00000007 AC3 FLOAT32 PCM pcm3: PCM cap: 0x001e07f0 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz pcm3: DAC: 8 pcm3: pcm3: nid=16 [pin: SPDIF-out (White Jack)] pcm3: + <- nid=8 [audio output] [src: pcm] pcm3: pcm3: Record: pcm3: Stream cap: 0x00000007 AC3 FLOAT32 PCM pcm3: PCM cap: 0x001e0570 16 20 24 32 bits, 32 44 48 96 192 KHz pcm3: ADC: 7 pcm3: pcm3: nid=7 [audio input] pcm3: + <- nid=15 [pin: SPDIF-in (White Jack)] [src: dig1] pcm3: pcm3: Mixer "vol" -> "none": child=0x00000010 pcm3: Mixer "pcm": parent="vol" pcm3: Soft PCM mixer ENABLED pcm3: Playback channel set is: Front Left, Front Right, pcm3: Playback channel matrix is: 2.0 (unknown) pcm3: Recording channel set is: Front Left, Front Right, pcm3: Recording channel matrix is: 2.0 (disconnected) I don't know how to go further... Thanks in advance.
  2. starikarp

    FreeBSD on iMac

    It is so easy to install now. Also wjo has not experience with partitioning can do install. Bsdinstall has also "auto" or something like this. And follow https://glenbarber.us/2011/11/12/Dual-Booting-OS-X-and-FreeBSD-9.html should work. For me was problem with Xorg because iMac 11,1 has Radeon gr. card which need KMS which is not yet in FreeBSD 9* but it is in FreeBSD 10.0-ALPHA (current) and it works. The problem is for me just sound which I am not successful yet.
  3. starikarp

    FreeBSD on iMac

    It works like a charm on FreeBSD 10.0-ALPHA1. BTW: glxgears shows much better results under FreeBSD Xorg than on Mountain Lion. GIMP which I am using from the first version is much better too. I don't miss ML anymore.
  4. starikarp

    FreeBSD on iMac

    I did install FreeBSD 9.2 RC3 iMac but I am not successful with Xorg. I rdid run Xorg -configure but when I try I got just black screen. Does anyone has success running KDE for example on FreeBSD installed on iMac, please?
  5. starikarp

    FreeBSD on iMac

    Yes, I know iit but there are nothing about Xorg. I am not sure how is about graphics card and monitor. I like to have KDE.
  6. starikarp

    FreeBSD on iMac

    Hi! I am newbie in the Forum and in OSX world too. I was long time FreeBSD user and three months ago I got and old iMac which I use now. I like install FreeBSD on it.How is our expirience with dual boot, please? I have: Model Name: iMac Model Identifier: iMac11,1 Processor Name: Intel Core i7 Processor Speed: 2.8 GHz Number of Processors: 1 Total Number of Cores: 4 L2 Cache (per Core): 256 KB L3 Cache: 8 MB Memory: 8 GB ATI Radeon HD 4850: Chipset Model: ATI Radeon HD 4850 Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 512 MB Vendor: ATI (0x1002) Device ID: 0x944a Revision ID: 0x0000 ROM Revision: 113-B9110C-425 EFI Driver Version: 01.00.383 Displays: iMac: Display Type: LCD Resolution: 2560 x 1440 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes Built-In: Yes Connection Type: DisplayPort I will wait for final release of FreeBSD 9.2 which supposed to have better support for Radeon graphics cards. I did try to run Live DVD GhostBSD without success: black screen when start X (Xfce). I have installed rEFIT. Thanks in advance. starikarp
×