Jump to content

mohican

Members
  • Content count

    22
  • Joined

  • Last visited

About mohican

  • Rank
    InsanelyMac Protégé
  1. Dual Monitor Setup.

    Is there a way to set up dual monitors that display different things in each monitor. ? My setup is below. Is there a way you can have one signal to one monitor going from DVI of video card, and another going to the other monitor in VGA? Cheers, Chris Model Name: Mac Model Identifier: ACPI Processor Name: Intel Core 2 Duo Processor Speed: 2.13 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 2 MB Memory: 3.25 GB Bus Speed: 1.07 GHz GeForce 7600 GT: Chipset Model: GeForce 7600 GT Type: Display Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 256 MB Vendor: NVIDIA (0x10de) Device ID: 0x0391 Revision ID: 0x00a1 Displays: L194WT: Resolution: 1440 x 900 @ 60 Hz Depth: 32-bit Color Core Image: Hardware Accelerated Main Display: Yes Mirror: Off Online: Yes Quartz Extreme: Supported Rotation: Supported Display Connector: Status: No display connected
  2. I have a $90 voucher from Apple - It is a one time use voucher. Selling for $50. Please pay by paypal to : chrisermeer@optusnet.com.au First in first served, the CODE will be emailed to you immediately. email chrisermeer@optusnet.com.au Details are below- Dear Mr ...... Thank you for contacting Apple. We are pleased to offer you a coupon for the Apple Store. This coupon is valid through 27/12/2008 for A$90 off a purchase of at least A$300, excluding GST and applicable shipping charges. Your coupon’s Promotion Code is YOU WILL GET THIS WHEN YOU PAY To redeem the coupon, please visit <http://www.apple.com/au/store> or call 133-622, where representatives are available Monday through Friday, from 8:00 a.m. to 9:00 p.m. Eastern time.
  3. Hi, Whenever i burn a disc, be it Toast or mac disk utility my computer stalls, and i get a grey screen, with several languages saying restart. So i have to restart. This is what it says "You need to restart your computer. Hold Down the Power button for several seconds or press the Restart button." When i restart I can burn one disc with no issue, however if i burn a second, the problem reoccurs. Any ideas? I am kinda getting the idea it might be where the data is stored or something. It is very odd. I am running a Gigabyte 965p, and leopard 10.5 more specs below. Hardware Overview: Model Name: Mac Model Identifier: ACPI Processor Name: Intel Core 2 Duo Processor Speed: 2.13 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 2 MB Memory: 4 GB Bus Speed: 1.07 GHz PIONEER DVD-RW DVR-111D: Firmware Revision: 1.23 Interconnect: ATAPI Burn Support: Yes (Apple Shipping Drive) Cache: 2000 KB Reads DVD: Yes CD-Write: -R, -RW DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO Media: Insert media and refresh to show available burn speeds Attached thumbnail(s)
  4. Hi, Whenever i burn a disc, be it Toast or mac disk utility my computer stalls, and i get a grey screen, with several languages saying restart. So i have to restart. This is what it says "You need to restart your computer. Hold Down the Power button for several seconds or press the Restart button." When i restart I can burn one disc with no issue, however if i burn a second, the problem reoccurs. Any ideas? I am kinda getting the idea it might be where the data is stored or something. It is very odd. I am running a Gigabyte 965p, and leopard 10.5 more specs below. Hardware Overview: Model Name: Mac Model Identifier: ACPI Processor Name: Intel Core 2 Duo Processor Speed: 2.13 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 2 MB Memory: 4 GB Bus Speed: 1.07 GHz PIONEER DVD-RW DVR-111D: Firmware Revision: 1.23 Interconnect: ATAPI Burn Support: Yes (Apple Shipping Drive) Cache: 2000 KB Reads DVD: Yes CD-Write: -R, -RW DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO Media: Insert media and refresh to show available burn speeds
  5. Hello, I Installed my leopard installation using the install method where you install tiger first on one partition, then install leopard on another partition. Problem is i have to press F8 on startup to choose leopard, otherwise it goes straight into tiger. Is there a way to automate straight to Leopard? Cheers, Chris I have tried other methods eg In tiger go in to the system preferences and click the startup icon and choose the start up disk/system. however I cannot see my hd in there?
  6. Hi, Whenever i burn a disc, be it Toast or mac disk utility my computer stalls, and i get a grey screen, with several languages saying restart. So i have to restart. When i restart it is not an issue, unless i burn another disc after that, and te problem reoccurs. Any ideas? I am kinda getting the idea it might be where the data is stored or something. It is very odd. I am running a Gigabyte 965p, and leopard 10.5 more specs below. Hardware Overview: Model Name: Mac Model Identifier: ACPI Processor Name: Intel Core 2 Duo Processor Speed: 2.13 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 2 MB Memory: 4 GB Bus Speed: 1.07 GHz PIONEER DVD-RW DVR-111D: Firmware Revision: 1.23 Interconnect: ATAPI Burn Support: Yes (Apple Shipping Drive) Cache: 2000 KB Reads DVD: Yes CD-Write: -R, -RW DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO Media: Insert media and refresh to show available burn speeds
  7. Hello, I Installed my leopard installation using the install method where you install tiger first on one partition, then install leopard on another partition. Problem is i have to press F8 on startup to choose leopard, otherwise it goes straight into tiger. Is there a way to automate straight to Leopard? Cheers, Chris NEW COMMENT -I have tried other methods eg In tiger go in to the system preferences and click the startup icon and choose the start up disk/system. however I cannot see my hd in there? I wrote "Thanks guys" at the bottom, however this problem is still reoccuring.
  8. Hi i am Currently using a Gigabyte GA - 945p motherboard. I am running 10.4.10, has anyone installed leopard on this yet? I have the Leopard GM 9a581 Patched for Intel PCs (SSE3 ONLY) and Patch. Afraid of messing my install since i don't have a clone of my HD. Hardware Overview: Model Name: Mac Model Identifier: ACPI Processor Name: Intel® Core2 CPU 4300 @ Processor Speed: 1.81 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per processor): 2 MB CPU Features: FPU VME DE PSE TSC MSR PAE MCE CX8 APIC SEP MTRR PGE MCA CMOV PAT PSE36 CLFSH DS ACPI MMX FXSR SSE SSE2 SS HTT TM SSE3 MON DSCPL EST TM2 MNI CX16 TPR Memory: 1 GB Bus Speed: 800 MHz
  9. Hi, When i download a file to my download folder in firefox the firefox download window pops up, however it shows only a blank area. It does not show my download or previous downloads. I have checked my firefox settings and everything seems ok. Any ideas? Cheers
  10. Hello i am a newb and i deleted everything in my VAR folder by mistake. I put it in the trash can and on restart my old log in was gone and i had to create a new one. I have lost everything. The files are still taking space on my computer so are they able to be recovered? i have a folder saying /var/tmp/tmp.1.JOEBsC39620 in my trash can? Is there a way i can save my computer and my files? PLEASE HELP< SO URGENT
  11. Hi, I am trying to install6 - Six Channel Audio on a GA - 965p S3 revision 3.3 Motherboard with Uphuck 1.3 . I am running 10.4.10 os x on this computer. I heard there is a way to get non digital - 6 channel audio working. Anyone got any ideas, the posts on this subject seem to be all over the place. Alot of talk seems to be about alc883 and alc888 Any help would be really appreciated. Thanks
×