Jump to content
InsanelyMac Forum

macrovers

Members
  • Content count

    4
  • Joined

  • Last visited

About macrovers

  • Rank
    InsanelyMac Protégé
  • Birthday September 9

Profile Information

  • Gender
    Male
  • Location
    India
  1. macrovers

    GTS 450 not detected

    Once again thanks for the reply artur. I made a nooby mistake, i didn't select the output in sound options now i have done it, and everything is fine. Thank you so much for your kind reply.
  2. macrovers

    GTS 450 not detected

    Thank you artur, i followed ur steps, added my DevID and Ven ID in NVDAResman.kext and NVDAGF100Hal.kext. My GPU is detected and i am now running full resolution. Again a small issue, Earlier i got audio working by using VoodooHDA.kext (2.7.2),the onboard ICH7 HD Audio was woking. But now no Audio, i have got the Dev ID and Ven ID of my Geforce HD Audio, but i don't know where to add those values.
  3. macrovers

    GTS 450 not detected

    Hi everybody, i have installed iAtKOS L2 ( lion 10.7.2 11c74 ) on my HP Pavilion a6230in. Issue > GPU not detected and display resolution only 1024x720 ( mine is a HPw1907 1440x900 ) My Specs: Intel Pentium ® Dual CPU E2140 @ 1.60 GHZ. ASUS P5LP-LE 2.5 GB RAM Network Card - Intel Pro 100 VE GPU - ASUS GTS450 1 GB DDR5 The issue is that my mackintosh doesn't recognize my GPU. When i go to > About this mac > System Report > Graphics and Display I get this >> Display: Type: GPU Bus: PCIe PCIe Lane Width: x16 VRAM (Total): 3 MB Vendor: NVIDIA (0x10de) Device ID: 0x1245 Revision ID: 0x00a1 Displays: Display: Resolution: 1024 x 768 Pixel Depth: 32-Bit Color (ARGB8888) Main Display: Yes Mirror: Off Online: Yes The options i ticked during install are : Boot loader > Chameleon 2.1 Boot loader Options > Graphics Enabler Built in Ethernet Patches > FakeSMC Disabler RTC>RTC Ev0Reboot IOPCIFamily Drivers > Main hardware > SATA/IDE > ACHI SATA Sound > VoodooHDA > 2.7.2 USB > USB Hardware Sensors > CPU Motherboard nVIDIA VGA Cards PS/2 VGA > nVidia > GF100 Network > I didn't select anything, after installation i added AppleIntel8255x.kext to S/L/E ( with modified value in info.Plist ) using kext wizard. So anybody who have installed GTS450 or any fermi cards, kindly have a look and suggest me to figure this out.
  4. HI friends this is my first post here. I have read many guides about getting osx installed in a PC. But i have a very bizarre issue. My PC ( very old one ) System Manufacturer: HP-Pavilion System Model: GS166AA-ACJ a6230in BIOS: Phoenix - AwardBIOS v6.00PG Processor: Intel® Pentium® Dual CPU E2140 @ 1.60GHz (2 CPUs), ~1.6GHz Memory: 2560MB RAM MOBO : asus p5lp-le. The updates i made on my pc were - 1) RAM - increased from 1 GB to 2.5 GB. 2) GPU - Asus ENGTS450/DI/1GDDR5 ( earlier it was onboard intel 945G ) I have earlier installed Snow Leopard, but couldnt figure out Ethernet, audio etc ( some basic ), I used without internet for sometime again went to windows. My problem--- Before upgrading the GPU to ENGTS 450 i was able to do installation with distros and SL org copy. But now i again i wanted to install LIon, so i wanted to check iatkos l2, If installation was a failure- i would have been satisfied but i can't even get to the installation screen, i downloaded iatkos l2 and i changed the bios setting to SATA controller to AHCI , that is the only change i can do with my stupid MOBO. What i am getting is that cd boot init Cd..sectors verifying ( sorry i couldn't even note it down, it goes very fast 2 or 3 seconds ) ......... ......... again pc restarts and the same process is looping over and over, I have tried Niresh lion too , but with same result.......the cd boot thing is looping again and again. I have tried 4 different DVD brands, various Burn speed x2,x4......20-25 DVD's but no use i couldn't get past the looping sequence. . Dont consider me a troll, its just a kind request if anybody could help me ( not to install osx) atleast i could learn what the problem is ?
×