Jump to content


  • Content count

  • Joined

  • Last visited

About Voldemort

  • Rank
    InsanelyMac Protégé
  1. Ozmosis

    And Should I use it for my Gigabyte G1 Sniper B5? or exclusively to use in QUO Motherboards? I say this because I see that This bootlogo is larger that the logo I have in my Bios
  2. Ozmosis

    Which Program use for edit this? I tried with Photoshop. And I get a window asking: RAW Photoshop Options: Describe "QUO-Logo.raw" Dimentions Height: Width: Channels: Headers: 0 OOOOh, Thanks. In fact yeah, For running mi ethernet IntelE1000 and VoodoHDA i need to put it on /L/ instead of /S/L/E and disable CSRUtil via NVRAM commands. sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:csr-active-config=%67%00%00%00
  3. Ozmosis

    No, look. I have two HDDs Both drives has El Capitan installed and running fine. But one of these I deleted the FakeSMC.kext from /S/L/E because I want to probe to run with FakeSMC directly from firmware. And I have a third HDD with Yosemite installed but, the same It boots only If FakeSMC is loaded on /S/L/E. And I don't want this. Any suggestions?
  4. Ozmosis

    Is there a way to load FakeSMC into Ozmosis and get rid of FakeSMC on /S/L/E? So I mean, I only want to load the FAKESMC into firmware and boot as normal without using this kext on /S/L/E. I tried using Kext2FFS, putting FakeSMC in "Kexts Folder" then running "KextToFfs.command" And loading the result FakeSMC.kextCompress.ffs in "Ffs/Kext/Compress" into firmware with MMTool. Also I tried changing the name of this Kext to SMCEmukator.kext and then converting to Ffs. Without success. I'm running "El Capitan". What Am I doing wrong? Thanks
  5. VoodooHDA - common problems

    Ok I will test it. I hope it works
  6. VoodooHDA - common problems

    I have a Issue with my HDMI sound through NVIDIA GT210. my audio device is: 0X10DE0BE3, so in Info.plist, I set the "IOPCIPrimaryMatch" to "0x0be310de". So, The VoodooHDA kext detects my HDMI audio with Four "Digital Out (HDMI)" in System Preferences. Now I probe to hear music choosing an HDMI port on System Prefs. Only I can get Audio on the "number 2 Digital Out (HDMI)" Now the problem is that I can Only hear 1 second of sound or music and then It get muted. What Can I do? Regards from Mexico
  7. Ozmosis

    Hi everyone! I installed Ozmosis to my Gigabyte B1 Sniper B5 and it works like a charm!!!!!!!. I know that in order to show the "Hermit Shell" and display the OS selector, in case that you have Windows/OSX installed and choose what OS you want to run, you might press the "HOME" button on the keyboard So, when I press this button, only it shows me "OSX". Only when I press "F12" it shows me the Classical Gigabyte Boot selector". And the Question are the following: How can I get the Windows logo in Hermit Shell, in order to choose what OS I want to run?? How can I edit the name of the Drives on the "F12" Gigabyte Boot Selector?. I mean, instead of showing: OSX and UEFI: ST5464738X32RF, Apears something like this: OSX and Windows 8.1 Thanks in Advance!!
  8. Install on PCCHIPS P17G

    SUPER ULTRA NEWS!!!! HOW TO INSTALL LION 10.7.5 ON PCCHIPS P17G Well guys, Here I am with good news to you!, Now its possible to run OSX Lion 10.7.5. Its Easy, first of all you need: - A Macintosh System (If you haven't installed already any version of OSX in your mobo, go with a mac's Friend). - iAtkos L2 - an 8GB usb thumbdrive - Chameleon. - THE DSDT ALREADY POSTED HERE!. 1) Once Downloaded iAtkos L2, go to Disk Utility and restore the image on your USB Thumbrive. THIS WILL ERASE THE EXISTING DATA ON IT, PLEASE BE SURE TO MAKE A BACKUP OF YOUR USB DRIVE 2) Once Restored, Try to boot it. If nothing happens, then install Chimera on your USB Installer. 3) Once booted Format your HDD as normal with Mac OS Journaled, the in custom options I choosen: - VoodooHDA 2.7.3 - SMC 32 Bit - PCI Configuration Fix (In order to prevent the stuck error: PCI Configuration Begin) - Boot in 32 bits - Original Apple Logo - Chameleon Bootloader. 4) Once installed succesfully, you need to boot your HDD with "-x -v" option. Why? Simple. Cuz the graphics card its not already installed/recognized then you need to boot minimal If you see the Intro and hear music, Voila!, you have Lion 10.7.2 on you PCChips P17G. 5) Now you Need to put the DSDt in order to get Working your GMA950 Integrated Graphics. with QE/CI, All Resolutions NOTE: In this Version, You need to put the the DSDT on /Extra folder instead of the root drive If you dont do it, simply willn't work. Now you have a Mac with Video Acceleration 6) Finally, you need to make Ethernet working. Lion doesnt have Realtek 8139 Kext integrated, so you need to Google it Realtek8139.kext for Lion, apply it. And that's it You have Internet on your mac. (If I have the Possibility to upload the Realtek Installer I'll do it). In conclusion This mobo can run Lion good, but I recomend to you to run with 2gB Ram or higher. and a external Graphics card. I mean the GMA950 works good, but it will work better if you have a Graphics Card. There are floating on the cloud a 10.7.5 procedure with an Update Script. Nowadays I haven't probe it. Of Course, It can run it!!. Read the last post here. Now the $1,000,000 dollars question is: Will it work with Mountain Lion????
  9. Install on PCCHIPS P17G

    But, In theory If you use a Core 2 Duo Based or the new gamma of Celeron Duo, like E3400- LGA775it may work natively with Lion and vanilla Kernel. In Fact I saw it in HCL 10.7 on the processors section, and it Says "Works out of the box". Unfortunately for me on the Mobos that I've assembled has an older Processor. -- But Also I've heard about its possible to Run Lion with the Old 10.6.8 Kernel. That was a Great Mobo!!, Unfortunately its no longer sold I assembled several machines with Mac OS X instead of Windows.
  10. Install on PCCHIPS P17G

    HOW TO INSTALL SNOW LEOPARD 10.6.7 ON PC CHIPS P17G First of all, you will need that Things: 1) An OSX86 ModCD 0.3.1 by Nawcom CD 2) A Snow Leopard Retail Installation Disc 3) A DSDT made especific for this MoBo, made by me. (see attachments) 4) 10.6.7 OSX Update from Apple. 5) 10.6.5 Legacy Kernel (see attachments) 6) If you have problems with USB (3rrorists_10.6.5_v2.dmg) (see attachments) 1) Boot with OSX86 ModCD, If you want to boot with USB, maybe yo wanna probe "this OSX86ModUSB" 2) If you are using the CD, once loaded the OSX86 screen, then eject the OSX86 disc, and put the Mac OS X 10.6 Install DVD, then Press "F5" 3) Install Snow Leopard as normal, Only select "Legacy Kernel". This mobo is compatible with Original Vanilla 10.6.0 Kernel, but if you use that, It will no able to detect QE/CI and all resolutions on your GMA950 Graphics Desktop. 4) Once Installed, Reboot without the CD, and Load the DSDT.aml in you root folder "/". And reboot 5) Once loaded the system, you'll notice the benefits of the DSDT on your system, for example: - You Have Ethernet - You have QE/CI enabled and all resolutions!! At This point, you'll have a fully functional OSX with Snow Leopard 10.6.0!! UPGRADING TO 10.6.7 Now if you wanna upgrade to 10.6.7, do the following: 1) Download 10.6.7 Upgrade from Apple, Not directly from Software Upgrade, I mean, downlaod it from the Apple's website 2) Install 10.6.7 package on your system, "But", Don't Restart the machine. Once finished the installation, go to Apple's Menu and choose "Force Quit" and select "Installer" 3) Next Install legacy_kernel-10.7.0 and now You cant restart your machine. 4) And Voila!!!, you have 10.6.7 on your machine, NOTE: If your USBs doesn't work then Install 3rr0rists_10.6.5_v2.dmg. In my personal case It was not necessary. 5) Also I put it SleepEnabler.kext and Kextutility for Install that Kext. (Personally I haven't probe this kext) UPGRADING TO 10.6.8 ¡¡¡NEW!! 1)First Download form Apple's website MacOSXUpdateCombo 10.6.8.dmg 2)Install it 3) Once installed, DON'T REBOOT IT, FORCE QUIT IN APPLE'S MENU. 4)Then Install legacy_kernel-10.6.8.pkg 5)Copy the following Kexts included on the "ACPIKextsfor10.6.8" folder - AppleACPIPlatform.kext - IOACPIFamily.kext - IOPCIFamily.kext 6) Run this on Terminal as Root: sudo -s "type your password" chmod -R 755 AppleACPIPlatform.kext chown -R root:wheel AppleACPIPlatform.kext chmod -R 755 IOACPIPlatform.kext chown -R root:wheel IOACPIPlatform.kext chmod -R 755 IOPClFamily.kext chown -R root:wheel IOPClFamily.kext 7) Repair Permissions on "Disk Utility" 8) If you have problems to boot for first time on 10.6.8 (Like me ), then boot with -f -v -x32 9) Then you may run properly, if not, then add this flags on "Kernel flags" on com.apple.boot.plist 10) And Voila!!, you have an OSX86 10.6.8 fully functional System The Files needed for 10.6.8 its on PCChipsTo1068.zip attached on the post ultimate news!!!! I modified the DSDT In order to make a faster boot and a more clean installation, in other word more Retail 90% installation, Only works with 3 kexts on Extra/Extensions. This package with this three kexts and the new DSDT that allows Full QE/CI, all resolutions, Network without kexts, no IOATAFamily.kext, no FixStillWaiting.kext is that: PCChips-DSDt-v5.0. Attached on that post PCChipsP17_I.zip PCChipsP17_II.zip PCChipsTo1068.zip PCChips_DSDt_v5.0.zip
  11. Install on PCCHIPS P17G

    Now, probe to Install with nawcom BootCD installing natively Snow Leopard. Then Charge ethernet Via DSDT and download ALL UPDATES VIA SOFTWARE UPDATE, Then Reboot Note: After this you'll need to Install IOUSBFamily 10.6.3 in order to get working the USBs on 10.6.6 and voila!!
  12. Apple Chime Sound...

    I was thinking about it, I know that its impossible to play an store a sound in the BIOS. But you can store and play a sound in a PIC Microcontroller. I dunno how to make it, i'm reading about it. But I heard about people that use this technique to make custom horn's car. Then first program the Apple Chime on a PIC Microcontroller pic16f876, and this conected to a micro speaker. Like laptop internal speakers. and the power on button, fixed with the PC/Laptop power on button. All ideas are accepted.
  13. internal card reader

    Its Easy!!!!!, well I say this after probe all the day, but I got working SDHC cards on this card reader. You only need IOPCMCIAFamily.kext in order to detect the reader. (Not INSTALL, ONLY DETECTED BY SYSTEM PROFILER, IT SHOWS "DRIVER INSTALED - NO") --- Installed on Extra/Extensions Now, In order to Get work the Reader, you may need to install also IOSDHCIBlockDevice.kext and need to Edit IOSDHCIBlockDevice.kext/Contents/Info.plist and IOSDHCIBlockDevice.kext/Contents/Resources/Info.plist And you need to edit this field: <key>IOPCIMatch</key> <string>0x000000</string> well I put 0000000, cuz I dont remember which number has before. And Replace with your ID Product first and then with the ID Vendor Like This: In my System Profiler Says this: - mass storage -- another storage device ID Product:0x803b ID Vendor:0x104c Then you mix it like this: 0x803b104c Finally Looks like This: <key>IOPCIMatch</key> <string>0x803b104c</string> -------------------------------------------- Then If you want to show the name of the Card Reader on System Profiler/PCI Cards, you need to add this lines, after the "<string>IOPCIDevice</string>" line: <key>AAPL,slot-name</key> <string>Built In</string> <key>model</key> <string>Texas Instruments 5 in one Card Reader (SD/MMC/MS/MS PRO/xD)</string> <key>device_type</key> <string>SD Host Controller</string> Once done it, You may to rebuild the Extensions.mkext with Kext Utility. Reboot, et voila!!!!!. If you want probes of working device, well, her is it:
  14. I got it, I inject the EFI Strings on different locations. For my Airport Extreme Card - I add the Strings on AppleBrcm4311.kext For my Texas Instrument Card Reader - I add the Strings on IOSDHCIBlockDevice.kext Here is it:
  15. Xcuse if I sound very very silly! I'm new in EFI Strings. I following your guide. the thing is that I want to add the Specifications Names of each PCI card. Like my Texas Instruments 5 in 1 card reader, my Airport Card and PCI bridges. But I dont know where can I inject the EFI Strings that I've generated. I think that I need to add it to my "com.apple.boot.plist" Here is a copy of my com.apple.boot.plist: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Kernel</key> <string>mach_kernel</string> <key>Timeout</key> <string>1</string> <key>Kernel Flags</key> <string>-f arch=i386</string> <key>EthernetBuiltIn</key> <string>y</string> <key>GraphicsEnabler</key> <string>y</string> <key>PciRoot</key> <string>1</string> <key>PciRoot(0x0)/Pci(0x1e,0x0)/Pci(0x9,0x2)</key> <dict> <key>AAPL,slot-name</key> <string>Built In</string> <key>model</key> <string>Texas Instruments 5 in one Card Reader</string> </dict> </dict> </plist> Thanks P.D Here is a pic: