Jump to content
InsanelyMac Forum

srsx

Members
  • Content count

    21
  • Joined

  • Last visited

About srsx

  • Rank
    InsanelyMac Protégé
  1. @alexander - Rampage's Guide. Something about DIGA and DIGB or similar in the editing section @Rampage Dev - I couldn't understand it, for the personality editing part. It was too confusing. Booting with AtiConfig=Lotus, and Ipomoea do not yeild a working framebuffer (Just AMDRadeonFrameBuffer from ioreg) @Slice I'm not using Clover. But it looks like you got it to work, although yours has only 3 ports. My ROM output has 4, I believe I need a personality with 4, despite the back of my card having only 3 ports. Would I need to use Clover to get these settings? Trying yours now. Where is the sense ID in my rom? : 194X1306.S22: TURKS XT C33302 GDDR5 64Mx32 Subsystem Vendor ID: 174b Subsystem ID: e194 Object Header Structure Size: 246 Connector Object Table Offset: 3e Router Object Table Offset: 0 Encoder Object Table Offset: b5 Display Path Table Offset: 12 Connector Object Id [19] which is [DISPLAY_PORT] encoder obj id [0x20] which is [iNTERNAL_UNIPHY1 (osx txmit 0x11 [duallink 0x1] enc 0x2)] linkb: false Connector Object Id [12] which is [HDMI_TYPE_A] encoder obj id [0x21] which is [iNTERNAL_UNIPHY2 (osx txmit 0x12 [duallink 0x2] enc 0x4)] linkb: false Connector Object Id [2] which is [DVI_I] encoder obj id [0x1e] which is [iNTERNAL_UNIPHY (osx txmit 0x10 [duallink 0x0] enc 0x0)] linkb: false Connector Object Id [2] which is [DVI_I] encoder obj id [0x15] which is [iNTERNAL_KLDSCP_DAC1 (osx txmit 0x00 enc 0x10?)] linkb: false
  2. Alright then... Either this guide is absolute trash or I can't understand it. I don't know where to find the DIG output or anything, I have my rom in plaintext right here. It says nothing about DIG.
  3. Could I ge the output for 3 aswell? I'll be able to start modding afterwards. Thanks for all your help
  4. Johns-Mac-Pro:ati-personality.pl.0.10 john$ perl ati-personality.pl ATI6000Controller.kext Kext /System/Library/Extensions/ATI6000Controller.kext/Contents/MacOS/*Controller Personality: Pithecia ConnectorInfo count in decimal: 0 Disk offset in decimal 101682 Personality: Bulrushes ConnectorInfo count in decimal: 0 Disk offset in decimal 101738 Personality: Cattail ConnectorInfo count in decimal: 0 Disk offset in decimal 101801 Personality: Hydrilla ConnectorInfo count in decimal: 0 Disk offset in decimal 101858 Personality: Duckweed ConnectorInfo count in decimal: 0 Disk offset in decimal 101914 Personality: Fanwort ConnectorInfo count in decimal: 0 Disk offset in decimal 106185 Personality: Elodea ConnectorInfo count in decimal: 0 Disk offset in decimal 108770 Personality: Kudzu ConnectorInfo count in decimal: 0 Disk offset in decimal 109030 Personality: Gibba ConnectorInfo count in decimal: 0 Disk offset in decimal 109086 Personality: Lotus ConnectorInfo count in decimal: 0 Disk offset in decimal 112802 Personality: Ipomoea ConnectorInfo count in decimal: 0 Disk offset in decimal 112858 Personality: Muskgrass ConnectorInfo count in decimal: 0 Disk offset in decimal 114882 Personality: Juncus ConnectorInfo count in decimal: 0 Disk offset in decimal 114938 Personality: Osmunda ConnectorInfo count in decimal: 0 Disk offset in decimal 114994 Personality: Pondweed ConnectorInfo count in decimal: 0 Disk offset in decimal 115748 Personality: Spikerush ConnectorInfo count in decimal: 0 Disk offset in decimal 115811 Personality: Typha ConnectorInfo count in decimal: 0 Disk offset in decimal 115868 Johns-Mac-Pro:ati-personality.pl.0.10 john$ Here is my output. I'll skip to the redsocks BIOS decoder now, and I'll probably use Pithecia or Ipomoea. And copy what? What do I have to copy from? Yours? I also think I have 4 ports (back panel has only 3) because of this: Connector Object Id [19] which is [DISPLAY_PORT] encoder obj id [0x20] which is [iNTERNAL_UNIPHY1 (osx txmit 0x11 [duallink 0x1] enc 0x2)] linkb: false Connector Object Id [12] which is [HDMI_TYPE_A] encoder obj id [0x21] which is [iNTERNAL_UNIPHY2 (osx txmit 0x12 [duallink 0x2] enc 0x4)] linkb: false Connector Object Id [2] which is [DVI_I] encoder obj id [0x1e] which is [iNTERNAL_UNIPHY (osx txmit 0x10 [duallink 0x0] enc 0x0)] linkb: false Connector Object Id [2] which is [DVI_I] encoder obj id [0x15] which is [iNTERNAL_KLDSCP_DAC1 (osx txmit 0x00 enc 0x10?)] linkb: false
  5. Yeah, I realize that is how it should look. I know how to program perl, nonetheless execute it. Check the end of the rampage guide, someone else has had it. I have no idea here. Any ideas? :s EDIT: Dug around, turns out I don't have something called 'otool', let me finish setting up Xcode.
  6. Awesome. Trying the first link, since the second has an "it just werks" solution. I'm halted at the first part, but I've done the second and third. Here's ati-personality's output: Kext /System/Library/Extensions/ATI2400Controller.kext/Contents/MacOS/AMD2400Controller Cannot open otool -arch x86_64 -l /System/Library/Extensions/ATI2400Controller.kext/Contents/MacOS/AMD2400Controller for input Looks like someone else had it, I'll be looking around for solutions to this.
  7. Bump with more console logs that I noticed while rebooting through all the framebuffers: 2/16/13 5:33:00.000 PM kernel[0]: ATY_Init: Starting 2/16/13 5:33:00.000 PM kernel[0]: ATY_Init: Checking dev-id 6758 2/16/13 5:33:00.000 PM kernel[0]: ATY_Init: Card 0x6758 was posted 2/16/13 5:33:00.000 PM kernel[0]: ATY_Init: Quiting for card 0x6758 There's no part in ATY_init.kext about 6600, only 5700, 6800 and up. I have also read I need to recompile ATI.c in my bootloader, where do I go about doing this? Thanks.
  8. Now using Chameleon svn2.2 r2117 Ideas? Still here at 6xxx
  9. No go. In the process of trying all the framebuffers now, almost 2/3 done. Booting with PCIRootUID=0 is a monitor sleep.
  10. Thanks for your reply! I have tried this before, with no avail. I tried it again now, rebooted, and I still have Graphics AMD Radeon HD 6xxx 1024 MB
  11. Hey My device/vendor id string is 0x67581002, and it is in both AMDRadeonAccelerator and ATI6000Controller BY DEFAULT. GraphicsEnabler is set to yes, but upon boot, I get... 2/16/13 1:24:35.000 PM kernel[0]: Kext org.slice.RadeonMonitor - library kext org.netkas.FakeSMC not found.[RealtekRTL81xx:init] RealtekRTL81xx.kext v0.0.90 (c)2010-2011 by Lnx2Mac (lnx2mac@gmail.com) 2/16/13 1:24:35.000 PM kernel[0]: Can't load kext org.slice.RadeonMonitor - failed to resolve library dependencies. 2/16/13 1:24:35.000 PM kernel[0]: Kext org.slice.RadeonMonitor failed to load (0xdc00800e). 2/16/13 1:24:35.000 PM kernel[0]: Failed to load kext org.slice.RadeonMonitor (error 0xdc00800e). 2/16/13 1:24:35.000 PM kernel[0]: Can't load kext com.apple.AMDRadeonAccelerator - failed to resolve library dependencies. 2/16/13 1:24:35.000 PM kernel[0]: Kext com.apple.AMDRadeonAccelerator failed to load (0xdc00800e). 2/16/13 1:24:35.000 PM kernel[0]: Failed to load kext com.apple.AMDRadeonAccelerator (error 0xdc00800e). 2/16/13 1:24:35.000 PM kernel[0]: Couldn't alloc class "RadeonMonitor" 2/16/13 1:24:42.927 PM com.apple.kextd[12]: /System/Library/Extensions/RadeonX.kext - no dependency found for org.netkas.FakeSMC. 2/16/13 1:24:42.928 PM com.apple.kextd[12]: Can't load /System/Library/Extensions/RadeonX.kext - failed to resolve dependencies. 2/16/13 1:24:42.929 PM com.apple.kextd[12]: Load org.slice.RadeonMonitor failed; removing personalities from kernel. 2/16/13 1:29:37.549 PM com.apple.kextcache[689]: RadeonX.kext - no dependency found for org.netkas.FakeSMC. 2/16/13 1:29:37.549 PM com.apple.kextcache[689]: RadeonX.kext is missing dependencies (including anyway; dependencies may be available from elsewhere) Ideas? Everything else works, but DVD Player / Steam / other programs do not. Thank you
  12. I tried that, I was unable to connect. Anyone help me find a kext for ML 10.8.2 and TPLink WN781ND? md5 of my current, nonworking kext's version.plist: 92e7fe9fb74acce51c5026beff1d6df8
  13. Bumping with findings: I can connect to a WEP network, but not any kind of WPA. For now I am using a 2870 usb stick I had laying around, and it has WPA fine. This card worked PERFECT in 10.7.x, but now doesn't have WPA in 10.8. I had to switch kexts when I updated, and I am lead to think the kext has caused it, or something with wpa_supplicant?
  14. Hi all! When I finished installing Mountain Lion, I imported my things via the built-in "transfer from another mac". Upon fixing wireless, console spews this out when trying to autoconnect to my network. Minor censoring of the obvious here: 2/9/13 11:52:44.369 AM airportd[261]: _processSystemPSKAssoc: No password for network <CWNetwork: 0x7f8033e03fd0> [ssid=ssidhere, bssid=so:me:da:ta:he:re security=WPA2 Personal, rssi=-62, channel=<CWChannel: 0x7f8034a05e90> [channelNumber=6(2GHz), channelWidth={20MHz}, active], ibss=0] in the system keychain From what I am reading, there is an entry in the system keychain for my network, with an empty password. On the very same SSID, channel, etc with no security (except MAC filtering) it can connect fine. I have looked inside the "Keychain Access" app and removed it's entry, aswell as removing some network related preference list fiels, and booting with a flushed cache. Help me out here? Thanks, very much. this is wrong forum, i know, reposting into networking now. sorry UPDATE: SOLVED I noticed in my console AHR: unknown locale {censored} (something like that), googled, found my chipset. AR928X will work with this: http://www.archive-host.com/files/1299124/98d9954ac73c5bbe45b69529396e23a074788300/WIFI_AR928X.zip Allowed me to connect to WPA networks with TL-WN781ND on 10.8.2, cheers!
  15. just relized this is in the wrong place... sorry
×