Jump to content

Mr MagOO

Members
  • Content count

    68
  • Joined

  • Last visited

About Mr MagOO

  • Rank
    InsanelyMac Protégé

Profile Information

  • Gender
    Male
  1. Hello, would like to thank you again MaLd0n, I finally managed to have a sleeping/waking hack again with your DSDT and a few hardware adjustment (basically, memory settings). I will stay on Sierra for the moment, as High Sierra is ok for sleeping but never wakes my hack Plus, Sierra's HFS+ is as fast as High sierra's APFS and the ethernet stack is far smoother ... I kicked out some unused devices (Asus AI things ...) and I'm trying to find the unused Method on it. I modified the names to match Apple's ones and I added a working FWR device (cosmetic). Here it is for those who have the same old MB. DSDT.aml.zip
  2. I'm back At least two port didn't worked. But I changed EHC1 et EHC2 in your dsdt by EH01 and EH02 and al USB ports are working now ! I think I have an hardware issue with the memory controller that can't handle 4 sticks of DDR2 1066. Some people say that the p5q ICH is not designed to handle 8 gigs because it's a full capacity for DDR2. I'm actually doing tests with ram at 800 MHz. For the moment, 6 sleep/wake without any hang. can you tell me why using -no_compat_check ?
  3. Test was little long because 12 times sleep/wake OK by power button ! But ... cpu is 1/2 speed 1,33 GHz for a nominal speed at 2,66 GHz. Don't know if this occurred at boot or after a wake. usb is still lacking ports for intel usb2, usb3 card is ok edit1 : bios was affected, it crashes when I tried to save cpu on auto... reboot is OK and now CPU is at 2,66 GHz. going to test sleep/wake by power button edit2 : second sleep/wake crashes ... i will try several hardware configuration (memory speed ...) tomorrow. I'm going to sleep. Big thank for your help
  4. agpm is loaded. Here is 10.1 ioreg and dsdt is yours. Six chained sleep/wake with no problem and the seventh failed on reboot and macOS doesn't load. Hardware problem?
  5. Well, I tried a 10.1 smbios with -no_compat_check and several hardware conf (FSB ...), no USB inject in clover, darkwake=0 ... there is still no change I did some ioreg files I will compare The next thing will be to downgrade to 10.12.6, where I could wake my hack 1 time on 3 and do the same test. I'll report back. Anyway, a big thank for your help. Edit : I did new Sierra install on backup SSD with your DSDT and -no_compat_check It sleeps and wake 2 times but it failed the third time by rebooting. OS didn't load right after that. I had to unplug the hack to get MacOS back. I tried without rtc fix patch but it's worth because it did a cmos reset. It is perhaps pointless but I think some USB are off.
  6. Thank you for your time, I'm trying your SBUS, and disabling FRWR device in bios. Will tell you with happens Edit : no change it goes to sleep, and when I try to wake it up : -HDD led fixed on 2 sec (no blinking activity) -HDD led off, black screen. i have to unplug it to restart (else, macOS won't load ...)
  7. Hello MaLdOn, I used to have persistant wake problems (1/3 black screen) with my old fully edited DSDT for my (old) Hack. Plus, I have to unplug it to restart (CMOS ?) With High Sierra, I totally loosed the ability to wake, still no problem to sleep. I tried iMac 10.1 and 14.2 with no luck. It could be my old cooked DSDT .. Could you please check it, Doctor ? DSDT-origin P5QDLX.aml.zip DSDT-edited.aml.zip
  8. Clover General discussion

    Hello, I'm actually trying to use the "slots" option in SMbios config . I use this in config plist : <dict> <key>Device</key> <string>Firewire</string> <key>ID</key> <integer>5</integer> <key>Name</key> <string>Firewire Port</string> <key>Type</key> <integer>1</integer> </dict> with "Name (_SUN, 0x05)" in DST. It give me a "HDMI port" in slot name instead of "Firewire port". Am I doing something wrong ? PS : Nvidia, LAN and WIFI SMbios slots are working well... Edit : works with SUN = 6, nothing for SUN = 5 in DSDT but my Nvidia GFX creates it automatically
  9. AppleAHCIPort.kext

    Using this kext is the only solution for me to have HDD sleep work (P5Q Dlx, ICH10, 10.13.1) Patchs on the fly are fixing AHCI but not HDD sleep for now. Thank you.
  10. Works with my old P5Q DLX (ICH10R), but i noticed that my HDD doesn't sleep with this fix. I've got a SSD for OS and a HDD for medias on my hack. I used to use the ESB2 DSDT fake ID and it does the same as this patch (works but no HDD sleep). The only way to have HDD sleep stills AppleAHCIPort from DP for me. Did you see this too, guys ? Anyway, thank you for your work.
  11. Clover Bug/Issue Report and Patch

    @ Sherlocks: With RC2 and nothing in CPU section, i've got hw.busfrequency: 1600000000 and : 0:100 0:100 MemLog inited, TSC freq: 3199879029 0:100 0:000 LegacyRegion2: Chipset/proc: 0x2E208086 0:100 0:000 Intel Series 4 and similar (PAM 0x90-0x96) 0:100 0:000 Test PAM1=(0x41=90, 0x5a=00, 0x81=00, 0x91=11) at chipset 2E208086 0:100 0:000 , Install = Success 0:109 0:009 BiosVideoDriverBindingStart! 0:109 0:000 BiosVideoCheckForVbe 0:109 0:000 EdidOverride not found 0:170 0:060 Edid1- 0:190 0:020 Edid0+ 0:190 0:000 found Detail Timing 1680x1050 0:235 0:044 0 640x480 attr=3BF - ok, edid+, 640x480, working, highest, pref=0 0:236 0:001 1 800x600 attr=3BF - ok, edid+, 800x600, working, highest, pref=1 0:238 0:001 2 1024x768 attr=3BF - ok, edid+, 1024x768, working, highest, pref=2 0:239 0:001 3 1280x1024 attr=3BF - ok, edid+, working, highest, pref=3 0:249 0:009 4 1680x1050 attr=3BF - ok, edid+, working, highest, pref=4 0:250 0:001 5 1280x800 attr=3BF - ok, edid- 0:250 0:000 BV new mode: 4 1680x1050 0:543 0:292 SetMode pref 4 (4) = Success 3:103 2:560 3:103 0:000 Now is 1.7.2017, 21:58:16 (GMT) 3:103 0:000 Starting Clover revision: 4101 on CLOVER EFI 3:103 0:000 Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.12.6 | XCODE: 8.3.3] 3:103 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37CBC476-9882-4946-9EAA-1D98B743AA2C,0x28,0x64000) @DE441D98 3:103 0:000 SelfDirPath = \EFI\CLOVER 3:103 0:000 === [ Get Smbios ] ======================================== 3:103 0:000 Type 16 Index = 0 3:103 0:000 Total Memory Slots Count = 4 3:103 0:000 Type 17 Index = 0 3:103 0:000 SmbiosTable.Type17->Speed = 1066MHz 3:103 0:000 SmbiosTable.Type17->Size = 2048MB 3:103 0:000 SmbiosTable.Type17->Bank/Device = BANK0 DIMM0 3:103 0:000 SmbiosTable.Type17->Vendor = Manufacturer00 3:103 0:000 SmbiosTable.Type17->SerialNumber = SerNum00 3:103 0:000 SmbiosTable.Type17->PartNumber = ModulePartNumber00 3:103 0:000 Type 17 Index = 1 3:103 0:000 SmbiosTable.Type17->Speed = 1066MHz 3:103 0:000 SmbiosTable.Type17->Size = 2048MB 3:103 0:000 SmbiosTable.Type17->Bank/Device = BANK1 DIMM1 3:103 0:000 SmbiosTable.Type17->Vendor = Manufacturer01 3:103 0:000 SmbiosTable.Type17->SerialNumber = SerNum01 3:103 0:000 SmbiosTable.Type17->PartNumber = ModulePartNumber01 3:103 0:000 Type 17 Index = 2 3:103 0:000 SmbiosTable.Type17->Speed = 1066MHz 3:103 0:000 SmbiosTable.Type17->Size = 2048MB 3:103 0:000 SmbiosTable.Type17->Bank/Device = BANK2 DIMM2 3:103 0:000 SmbiosTable.Type17->Vendor = Manufacturer02 3:103 0:000 SmbiosTable.Type17->SerialNumber = SerNum02 3:103 0:000 SmbiosTable.Type17->PartNumber = ModulePartNumber02 3:103 0:000 Type 17 Index = 3 3:103 0:000 SmbiosTable.Type17->Speed = 1066MHz 3:103 0:000 SmbiosTable.Type17->Size = 2048MB 3:103 0:000 SmbiosTable.Type17->Bank/Device = BANK3 DIMM3 3:103 0:000 SmbiosTable.Type17->Vendor = Manufacturer03 3:103 0:000 SmbiosTable.Type17->SerialNumber = SerNum03 3:103 0:000 SmbiosTable.Type17->PartNumber = ModulePartNumber03 3:103 0:000 Boot status=0 3:103 0:000 Running on: 'System Product Name' with board 'P5Q DELUXE' 3:103 0:000 === [ GetCPUProperties ] ================================== 3:103 0:000 CPU Vendor = 756E6547 Model=1067A 3:103 0:000 The CPU supported SSE4.1 3:103 0:000 got cores from CPUID_1 = 4 3:103 0:000 The CPU not supported turbo 3:103 0:000 BrandString = Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz 3:103 0:000 Calibrated TSCFrequency =3199879029 =3199MHz 3:103 0:000 MSR dumps: 3:103 0:000 @0x00CD=80000A04 3:103 0:000 @0x0198=616081F0600081F 3:103 0:000 QPI(1)ExternalClock: 400 MHz 3:103 0:000 Take FSB: 475000 kHz 3:103 0:000 FSBFrequency = 475 MHz, DMI FSBFrequency = 400 MHz, 3:103 0:000 (2)FSBFrequency : 400 MHz 3:103 0:000 Corrected FSBFrequency = 400 MHz 3:103 0:000 PIS(1): 400 MHz 3:103 0:000 PIS(2): 1600000 kHz 3:103 0:000 PIS(3): 1600 MHz 3:103 0:000 MaxSpeed(1): 3200 MHz 3:103 0:000 MaxDiv/MinDiv: 8.0/6 3:103 0:000 Turbo: 9/0/0/0 3:103 0:000 Features: 0xBFEBFBFF 3:103 0:000 Threads: 4 3:103 0:000 Cores: 4 3:103 0:000 FSB: 400 MHz 3:103 0:000 CPU: 3800 MHz 3:103 0:000 TSC: 3800 MHz 3:103 0:000 PIS: 1600 MHz 3:103 0:000 ExternalClock: 400 MHz 3:103 0:000 === [ GetDevices ] ======================================== 3:103 0:000 PCI (00|00:00.00) : 8086 2E20 class=060000 3:103 0:000 PCI (00|00:01.00) : 8086 2E21 class=060400 3:103 0:000 PCI (00|01:00.00) : 10DE 1284 class=030000 3:103 0:000 - GFX: Model=Asus GeForce GT 630 family 108 (Nvidia) 3:103 0:000 PCI (00|01:00.01) : 10DE 0E0F class=040300 3:103 0:000 - HDMI Audio: 3:103 0:000 PCI (00|00:1A.00) : 8086 3A37 class=0C0300 3:103 0:000 PCI (00|00:1A.01) : 8086 3A38 class=0C0300 3:103 0:000 PCI (00|00:1A.02) : 8086 3A39 class=0C0300 3:103 0:000 PCI (00|00:1A.07) : 8086 3A3C class=0C0320 3:103 0:000 PCI (00|00:1B.00) : 8086 3A3E class=040300 3:103 0:000 PCI (00|00:1C.00) : 8086 3A40 class=060400 3:103 0:000 PCI (00|04:00.00) : 14E4 43A0 class=028000 3:103 0:000 - WIFI: Vendor=Broadcom 3:103 0:000 PCI (00|00:1C.02) : 8086 3A44 class=060400 3:103 0:000 PCI (00|03:00.00) : 1B73 1100 class=0C0330 3:103 0:000 PCI (00|00:1C.05) : 8086 3A4A class=060400 3:103 0:000 PCI (00|02:00.00) : 11AB 4364 class=020000 3:103 0:000 - LAN: 0 Vendor=Marvell 3:103 0:000 PCI (00|00:1D.00) : 8086 3A34 class=0C0300 3:103 0:000 PCI (00|00:1D.01) : 8086 3A35 class=0C0300 3:104 0:000 PCI (00|00:1D.02) : 8086 3A36 class=0C0300 3:104 0:000 PCI (00|00:1D.07) : 8086 3A3A class=0C0320 3:104 0:000 PCI (00|00:1E.00) : 8086 244E class=060401 3:104 0:000 PCI (00|05:03.00) : 11C1 5811 class=0C0010 3:104 0:000 PCI (00|00:1F.00) : 8086 3A16 class=060100 3:104 0:000 PCI (00|00:1F.02) : 8086 3A22 class=010601 3:104 0:000 PCI (00|00:1F.03) : 8086 3A30 class=0C0500 3:104 0:000 === [ GetDefaultSettings ] ================================ 3:104 0:000 Clover load options size = 0 bytes 3:106 0:002 EFI\CLOVER\config.plist loaded: Success 3:106 0:000 === [ GetListOfThemes ] =================================== 3:106 0:000 - [00]: embedded 3:108 0:001 - [00]: random 3:108 0:000 - [00]: bootcamp 3:111 0:003 === [ Found config plists ] =============================== 3:111 0:000 - config.plist 3:112 0:000 === [ GetEarlyUserSettings ] ============================== 3:112 0:000 timeout set to 5 3:112 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 3:112 0:000 KextsToPatch: 3 requested 3:112 0:000 - [00]: IOAHCIBlockStorage (activation TRIM) :: BinPatch :: data len: 11 3:112 0:000 - [01]: AppleHDA (AD2000B dans AppleHDA) :: BinPatch :: data len: 4 3:112 0:000 - [02]: AppleHDA (suppression logs AppleHDA) :: BinPatch :: data len: 16 3:112 0:000 Default theme: bootcamp 3:112 0:000 === [ LoadDrivers ] ======================================= 3:113 0:000 Loading AppleImageCodec-64.efi status=Success 3:114 0:000 Loading AppleKeyAggregator-64.efi status=Success 3:114 0:000 Loading AppleUITheme-64.efi status=Success 3:114 0:000 Loading FirmwareVolume-64.efi status=Success 3:114 0:000 Loading FSInject-64.efi status=Success 3:114 0:000 Loading SMCHelper-64.efi status=Success 3:114 0:000 Loading HFSPlus-64.efi status=Success 3:115 0:001 - driver needs connecting 3:115 0:000 Loading XhciDxe-64.efi status=Success 3:116 0:000 - driver needs connecting 3:116 0:000 2 drivers needs connecting ... 3:116 0:000 PlatformDriverOverrideProtocol->GetDriver overriden 3:116 0:000 HFS+ driver loaded 3:125 0:009 PciIo started 3:125 0:000 HcDevicePath found 3:125 0:000 attribute saved=700 3:125 0:000 attribute supports=8700 Status=Success 3:125 0:000 device enable status=Success 3:125 0:000 Create USB2HC 3:125 0:000 will not apply workaround to test, N=8 3:125 0:000 Xhc HCI version=0 3:125 0:000 PageSize = 1 3:125 0:000 XhcCreateUsb3Hc: Capability length 0x80 3:125 0:000 XhcCreateUsb3Hc: ExtCapRegBase 0x8000 3:125 0:000 XhcCreateUsb3Hc: HcSParams1 0x8000820 3:125 0:000 XhcCreateUsb3Hc: HcSParams2 0xFC000054 3:125 0:000 XhcCreateUsb3Hc: HcCParams 0x200071E1 3:125 0:000 XhcCreateUsb3Hc: DBOff 0x3000 3:125 0:000 XhcCreateUsb3Hc: RTSOff 0x2000 3:125 0:000 XhcCreateUsb3Hc: UsbLegSupOffset 0x330 3:125 0:000 XhcCreateUsb3Hc: DebugCapSupOffset 0x340 3:125 0:000 XhcIntelQuirks 3:125 0:000 XhcResetHC 3:127 0:002 Initialize the schedule 3:127 0:000 Start the Host Controller 3:127 0:000 XhcDriverBindingStart: XHCI started for controller @ DF4DF318 3:226 0:098 XhcReset: status Success 3:226 0:000 XhcGetState: current state 0 3:226 0:000 XhcSetState: status Success 3:226 0:000 XhcGetCapability: 8 ports, 64 bit capable=1 3:266 0:039 === [ InitScreen ] ======================================== 3:266 0:000 Console modes reported: 4, available modes: 3:266 0:000 - [01]: 80x25 3:266 0:000 - [02]: 80x50 3:266 0:000 - [03]: 100x31 3:266 0:000 - [04]: 210x55 (current mode) 3:266 0:000 SetScreenResolution: 1680x1050 - already set 3:266 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37CBC476-9882-4946-9EAA-1D98B743AA2C,0x28,0x64000) 3:266 0:000 === [ GetMacAddress ] ===================================== 3:266 0:000 === [ ScanSPD ] =========================================== 3:266 0:000 SMBus device : 8086 3A30 class=0C0500 status=Success 3:266 0:000 SMBus CmdReg: 0x3 3:266 0:000 Scanning SMBus [8086:3A30], mmio: 0xFCFFF404, ioport: 0x400, hostc: 0x1 3:266 0:000 Slots to scan [8]... 3:267 0:000 SPD[0]: Type 8 @0x50 3:281 0:014 DDR speed 800MHz 3:281 0:000 Slot: 0 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000 3:282 0:000 SPD[1]: Type 8 @0x51 3:296 0:014 DDR speed 800MHz 3:296 0:000 Slot: 1 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000 3:297 0:000 SPD[2]: Type 8 @0x52 3:311 0:014 DDR speed 800MHz 3:311 0:000 Slot: 2 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000 3:312 0:000 SPD[3]: Type 8 @0x53 3:327 0:014 DDR speed 800MHz 3:327 0:000 Slot: 3 Type 19 2048MB 800MHz Vendor=G Skill Intl PartNo=F2-8500CL5-2GBPK SerialNo=0000000000000000 3:327 0:000 === [ GetAcpiTablesList ] ================================= 3:327 0:000 Get Acpi Tables List from RSDT: 3:327 0:000 - [00]: FACP OEMFACP len=132 3:327 0:000 - [01]: APIC OEMAPIC len=108 3:327 0:000 - [02]: MCFG OEMMCFG len=60 3:327 0:000 - [03]: OEMB AMI_OEM len=137 3:327 0:000 - [04]: HPET OEMHPET len=56 3:327 0:000 - [05]: OSFR OEMOSFR len=176 3:327 0:000 - [06]: SSDT CpuPm len=2684 3:327 0:000 === [ GetUserSettings ] =================================== 3:327 0:000 USB FixOwnership: yes 3:327 0:000 - final DSDT Fix mask=00000000 3:327 0:000 EnableC4: yes 3:327 0:000 EnableC2: yes 3:327 0:000 C3Latency: 999 3:327 0:000 MinMultiplier: 6 3:327 0:000 MaxMultiplier: 8 3:327 0:000 ResetAddr: 0xCF9 3:327 0:000 Calc ResetVal: 0x6 3:327 0:000 ResetVal: 0x6 3:327 0:000 ChassisType: 0xD 3:327 0:000 FirmwareFeatures: 0xE907F537 3:327 0:000 PlatformFeature: 0x1 3:327 0:000 Converted CustomUUID 9EE73425-D509-4467-9581-91743221C88E 3:328 0:000 === [ ScanVolumes ] ======================================= 3:328 0:000 Found 7 volumes with blockIO 3:328 0:000 - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0) 3:328 0:000 Result of bootcode detection: bootable unknown (legacy) 3:328 0:000 - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0) 3:328 0:000 - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x3,0x0,0x0) 3:328 0:000 Found optical drive 3:328 0:000 - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,37CBC476-9882-4946-9EAA-1D98B743AA2C,0x28,0x64000) 3:329 0:000 Result of bootcode detection: bootable Clover (clover) 3:329 0:000 This is SelfVolume !! 3:329 0:000 - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,99249595-DA06-4D03-8DCA-569D6021BD56,0x64028,0x1BD8A540) 3:330 0:000 Result of bootcode detection: bootable unknown (legacy) 3:330 0:000 - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,FB5D9A09-8A39-4BC2-9DB5-8E95676BBFB5,0x1BDEE568,0x135F20) 3:330 0:000 - [06]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,MBR,0x58D76484,0x2,0x3A38602E) 3:330 0:000 Result of bootcode detection: bootable unknown (legacy) 3:330 0:000 Loading nvram.plist from Vol 'EFI' - loaded, size=2377 3:331 0:000 === [ PutNvramPlistToRtVars ] ============================= 3:331 0:000 Adding Key: EFIBluetoothDelay: Size = 2, Data: B8 0B 3:331 0:000 Adding Key: EFILoginHiDPI: Size = 4, Data: 00 00 00 00 3:331 0:000 Adding Key: LocationServicesEnabled: Size = 1, Data: 01 3:331 0:000 Adding Key: SystemAudioVolume: Size = 1, Data: 27 3:331 0:000 Adding Key: SystemAudioVolumeDB: Size = 1, Data: 00 3:331 0:000 Adding Key: bluetoothActiveControllerInfo: Size = 16, Data: 8D 82 AC 05 00 00 00 00 13 3A B4 18 D1 F3 43 12 3:331 0:000 Adding Key: bluetoothInternalControllerInfo: Size = 14, Data: 8D 82 AC 05 00 00 13 3A B4 18 D1 F3 43 12 3:331 0:000 Adding Key: bootercfg: Size = 2, Data: 28 00 3:331 0:000 Adding Key: csr-active-config: Size = 4, Data: 03 00 00 00 3:331 0:000 Adding Key: fakesmc-key-#KEY-ui32: Size = 4, Data: 00 00 00 18 3:331 0:000 Adding Key: fakesmc-key-$Adr-ui32: Size = 4, Data: 00 00 03 00 3:331 0:000 Adding Key: fakesmc-key-$Num-ui8: Size = 1, Data: 01 3:331 0:000 Adding Key: fakesmc-key-BATP-flag: Size = 1, Data: 00 3:331 0:000 Adding Key: fakesmc-key-BEMB-flag: Size = 1, Data: 00 3:331 0:000 Adding Key: fakesmc-key-BNum-ui8: Size = 1, Data: 00 3:331 0:000 Adding Key: fakesmc-key-CLKH-{clh: Size = 8, Data: 00 00 70 80 00 01 19 40 3:331 0:000 Adding Key: fakesmc-key-CLKT-ui32: Size = 4, Data: 00 01 3F 52 3:331 0:000 Adding Key: fakesmc-key-EPCI-ui32: Size = 4, Data: 07 A0 07 00 3:331 0:000 Adding Key: fakesmc-key-LSSS-ui16: Size = 2, Data: 02 00 3:331 0:000 Adding Key: fakesmc-key-MSAc-ui16: Size = 2, Data: 00 00 3:331 0:000 Adding Key: fakesmc-key-MSDW-ui8: Size = 1, Data: 01 3:331 0:000 Adding Key: fakesmc-key-MSFW-ui8: Size = 2, Data: 01 00 3:331 0:000 Adding Key: fakesmc-key-MSLD-ui8: Size = 1, Data: 00 3:331 0:000 Adding Key: fakesmc-key-MSPS-ui16: Size = 2, Data: 00 03 3:331 0:000 Adding Key: fakesmc-key-MSTc-ui8: Size = 1, Data: 00 3:331 0:000 Adding Key: fakesmc-key-MSWr-ui8: Size = 1, Data: 00 3:331 0:000 Adding Key: fakesmc-key-NATJ-ui8: Size = 1, Data: 02 3:331 0:000 Adding Key: fakesmc-key-NATi-ui16: Size = 2, Data: 00 1E 3:331 0:000 Adding Key: fakesmc-key-NTOK-ui8: Size = 1, Data: 01 3:331 0:000 Adding Key: fakesmc-key-RBr -ch8*: Size = 8, Data: 6A 31 36 6A 31 37 00 00 3:331 0:000 Adding Key: fakesmc-key-REV -ch8*: Size = 6, Data: 02 15 0F 00 00 07 3:331 0:000 Adding Key: fakesmc-key-RMde-char: Size = 1, Data: 41 3:331 0:000 Adding Key: fakesmc-key-RPlt-ch8*: Size = 8, Data: 6A 31 37 00 00 00 00 00 3:331 0:000 Adding Key: flagstate: Size = 32, Data: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 3:331 0:000 Adding Key: fmm-computer-name: Size = 4, Data: 4B 32 53 4F 3:331 0:000 Adding Key: prev-lang:kbd: Size = 4, Data: 66 72 3A 30 3:331 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none' 3:331 0:000 === [ InitTheme ] ========================================= 3:332 0:000 Using theme 'bootcamp' (EFI\CLOVER\themes\bootcamp) 3:333 0:001 Loading font from ThemeDir: Success 3:333 0:000 Choosing theme bootcamp 3:333 0:000 after NVRAM boot-args= 3:333 0:000 === [ Dump SMC keys from NVRAM ] ========================== 3:333 0:000 found AppleSMC protocol 3:333 0:000 === [ ScanLoader ] ======================================== 3:333 0:000 - [03]: 'EFI' 3:334 0:001 - [04]: 'Macintosh SSD' 3:336 0:001 AddLoaderEntry for Volume Name=Macintosh SSD 3:337 0:001 hibernated: set as never 3:343 0:005 - [05]: 'Recovery HD' 3:343 0:000 AddLoaderEntry for Volume Name=Recovery HD 3:345 0:001 === [ AddCustomTool ] ===================================== 3:346 0:000 === [ GetEfiBootDeviceFromNvram ] ========================= 3:346 0:000 - found entry 0. 'Boot macOS from Macintosh SSD', Volume 'Macintosh SSD', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,99249595-DA06-4D03-8DCA-569D6021BD56,0x64028,0x1BD8A540)\System\Library\CoreServices\boot.efii' 3:346 0:000 DefaultIndex=0 and MainMenu.EntryCount=6 3:465 0:119 GUI ready 14:144 10:679 BootVariable of the entry is empty 14:144 0:000 === [ StartLoader ] ======================================= 14:144 0:000 Finally: Bus=400000kHz CPU=3200MHz 14:144 0:000 QPI: disable table132 14:144 0:000 Loading boot.efi status=Success 14:192 0:047 GetOSVersion: 10.12.5 (16F73) 14:192 0:000 CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS 14:192 0:000 Filtering KextPatches: 14:192 0:000 - [00]: IOAHCIBlockStorage (activation TRIM) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed 14:192 0:000 - [01]: AppleHDA (AD2000B dans AppleHDA) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed 14:192 0:000 - [02]: AppleHDA (suppression logs AppleHDA) :: BinPatch :: [OS: 10.12.5 | MatchOS: All | MatchBuild: All] ==> allowed 14:192 0:000 === [ PatchSmbios ] ======================================= 14:192 0:000 MaxSpeed(1): 3200 MHz 14:192 0:000 ExternalClock: 400 MHz 14:192 0:000 insert table 9 for dev 0:0 14:192 0:000 insert table 9 for dev 0:1 14:192 0:000 insert table 9 for dev 0:0 14:192 0:000 insert table 9 for dev 0:0 14:192 0:000 insert table 9 for dev 3:0 14:193 0:000 Trusting SMBIOS... 14:193 0:000 Channels: 2 14:193 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23 14:193 0:000 partNum=ModulePartNumber00 14:193 0:000 SMBIOS Type 17 Index = 0 => 0 0: 14:193 0:000 BANK 0 DIMM0 1066MHz 2048MB 14:193 0:000 partNum=ModulePartNumber02 14:193 0:000 SMBIOS Type 17 Index = 1 => 2 2: 14:193 0:000 BANK 1 DIMM0 1066MHz 2048MB 14:193 0:000 partNum=ModulePartNumber01 14:193 0:000 SMBIOS Type 17 Index = 2 => 1 1: 14:193 0:000 BANK 0 DIMM1 1066MHz 2048MB 14:193 0:000 partNum=ModulePartNumber03 14:193 0:000 SMBIOS Type 17 Index = 3 => 3 3: 14:193 0:000 BANK 1 DIMM1 1066MHz 2048MB 14:193 0:000 mTotalSystemMemory = 8192 14:193 0:000 NumberOfMemoryDevices = 4 14:193 0:000 Type20[0]->End = 0x1FFFFF, Type17[0] = 0x800 14:193 0:000 Type20[1]->End = 0x40FFFF, Type17[2] = 0x2000 14:193 0:000 Type20[2]->End = 0x40FFFF, Type17[3] = 0x4000 14:193 0:000 Disabled SetTable132 14:193 0:000 === [ PatchACPI ] ========================================= 14:193 0:000 RSDT 0xDFF70000 14:193 0:000 FADT from RSDT: 0xDFF70200 14:193 0:000 XSDT 0xDFF70100 14:193 0:000 FADT from XSDT: 0xDFF70290 14:193 0:000 Xsdt reallocation done 14:193 0:000 old FADT length=F4 14:193 0:000 DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml 14:194 0:000 Apply DsdtFixMask=0x00000000 14:194 0:000 drop _DSM mask=0x0000 14:194 0:000 === [ FixBiosDsdt ] ======================================= 14:194 0:000 VideoCard devID=0x128410DE 14:194 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0 14:194 0:000 USBADR[0] = 0x1A0000 and PCIe = 0xFFFE 14:194 0:000 USBADR[1] = 0x1A0001 and PCIe = 0xFFFE 14:194 0:000 USBADR[2] = 0x1A0002 and PCIe = 0xFFFE 14:194 0:000 USBADR[3] = 0x1A0007 and PCIe = 0xFFFE 14:194 0:000 Found Airport BCM at 0x1C0000, 0x0 14:194 0:000 USBADR[4] = 0x1C0002 and PCIe = 0x0 14:194 0:000 USBADR[5] = 0x1D0000 and PCIe = 0xFFFE 14:194 0:000 USBADR[6] = 0x1D0001 and PCIe = 0xFFFE 14:194 0:000 USBADR[7] = 0x1D0002 and PCIe = 0xFFFE 14:194 0:000 USBADR[8] = 0x1D0007 and PCIe = 0xFFFE 14:194 0:000 first CPU found at 2A offset 2D 14:194 0:000 score candidate at 26 14:194 0:000 score inserted in acpi_cpu_score _PR_ 14:194 0:000 Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 , within the score: _PR_ 14:194 0:000 Found PCIROOTUID = 0 14:194 0:000 === [ ACPIDropTables ] ==================================== 14:194 0:000 === [ DropSSDT ] ========================================== 14:194 0:000 Drop tables from Xsdt, SIGN=SSDT TableID= Length=0 14:194 0:000 Xsdt has tables count=7 14:194 0:000 Table: SSDT CpuPm 2684 dropped 14:194 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=4 14:194 0:000 Initial control=0x600081F 14:194 0:000 Maximum control=0x81F 14:194 0:000 UnderVoltStep=0 14:194 0:000 PLimitDict=0 14:194 0:000 PStates count=5 14:194 0:000 SSDT with CPU P-States generated successfully 14:194 0:000 SSDT with CPU C-States generated successfully 14:194 0:000 === [ RestSetup macOS ] =================================== 14:194 0:000 EdidDiscovered size=128 14:194 0:000 ------- EDID Table 14:194 0:000 000 | 00 FF FF FF FF FF FF 00 4C 2D 14:194 0:000 010 | 7F 02 32 32 45 4D 06 11 01 03 14:194 0:000 020 | 80 2F 1E 78 2A D5 15 A4 55 49 14:194 0:000 030 | 9A 27 14 50 54 BF EF 80 B3 00 14:194 0:000 040 | 81 80 81 40 71 4F 01 01 01 01 14:194 0:000 050 | 01 01 01 01 7C 2E 90 A0 60 1A 14:194 0:000 060 | 1E 40 30 20 36 00 DA 28 11 00 14:194 0:000 070 | 00 1A 00 00 00 FD 00 38 4B 1E 14:194 0:000 080 | 51 0E 00 0A 20 20 20 20 20 20 14:194 0:000 090 | 00 00 00 FC 00 53 79 6E 63 4D 14:194 0:000 100 | 61 73 74 65 72 0A 20 20 00 00 14:194 0:000 110 | 00 FF 00 48 53 41 50 32 30 31 14:194 0:000 120 | 35 35 34 0A 20 20 00 5B 14:194 0:000 NVidia GFX injection not set 14:195 0:000 stringlength = 3450 14:195 0:000 CurrentMode: Width=1680 Height=1050 14:195 0:000 Beginning FSInjection FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE441A98 FSInjectionInstall ... - Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: DE441A98 14:196 0:000 Use origin smbios table type 1 guid. 14:196 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other 14:196 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.12 14:196 0:000 Extra kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext 14:201 0:004 Extra PlugIn kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext\Contents\PlugIns\HWInfo.kext 14:203 0:001 Extra PlugIn kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext\Contents\PlugIns\IntelCPUMonitor.kext 14:204 0:001 Extra PlugIn kext: EFI\CLOVER\kexts\10.12\FakeSMC.kext\Contents\PlugIns\W836x.kext 14:207 0:003 Extra kext: EFI\CLOVER\kexts\10.12\Marvell88E8056.kext 14:209 0:001 Custom boot is disabled 14:209 0:000 Closing log @Sherlocks : I looked in clover wiki and i still don't understand what you mean by setting BusSpeedkHz = 400,000. Shouldn't it be 400000 or 1600000 ?
  12. Clover Bug/Issue Report and Patch

    I get hw.busfrequency: 1600000000 All good !
  13. Clover Bug/Issue Report and Patch

    Right, i do raise my external FSB from 333 to 400MHz which is known for QX9750, but with 12M cache . So your are right too, original quad FSB is 1333 MHz for Q9400 and 1066 for your dual core CPU. In my logs, i always had these lines which i don't understand : 3:105 0:000 FSBFrequency = 475 MHz, DMI FSBFrequency = 400 MHz, -> FSB is always false detected and corrected by DMI, perhaps because of my overclock ? and : 3:105 0:000 Turbo: 9/0/0/0 -> what is this "9" value for a Penryn CPU with no turbo ?
×