Jump to content

ioreknanou

Members
  • Content count

    17
  • Joined

  • Last visited

About ioreknanou

  • Rank
    InsanelyMac Protégé
  1. ATI x19x0 snow leopard driver

    I've finally found a way to get my sleep working on my Asus P5W DH Deluxe but I have a video card (ATI X1900XTX 512 MB) problem when it tries to wakes up. Everything seems to wake but I can't have the display. Instead I have a black screen with white caracters with the following message: "A52021 X1900XTX BIOS". Somethimes, I get some kind of white screen. Other then that it is working great (though only 32-bit) Did anyone have seen a similar problem or know what to look for ? I tested some DSDT patches but that doesn't seems to work.
  2. ATI x19x0 snow leopard driver

    I tried the steps from the script in this link but I have some errors. I have an Ati (not Asus or other brand) X1900XTX 512 MB (Dev: 7249, 1002). Here's what I have done. - I opened Terminal, sudo -s, password and drag and drop the install script. - choose 1 : Series 1x00 - 1 Serie XT , XTX - card name : x1900xtx (also tried x1900, x1900xt) - Ati - 3) Serie 1900 After that, I get the following message: But the 1900 file is in the same as the install file. I tried to drag and drop the 1900 file in Terminal and after choosing 7249 and 1002 I get the folowing message: I opened the log file and here's the results: What is possibly going wrong ? And by the way, what is the use of hexDump file ? And last question, is it working also with 64-bit ? Thanks a lot for your help!
  3. Retail post-install on Asus P5W Mobo

    Usually, when Snow Leopard is booted, it is supposed to be in 64-bit mode. But you're probably booting in 32-bit. You can boot in 32-bit if you're writing manually -x32 as a boot argument each time you boot the OS or maybe is it already written in your com.apple.Boot.plist file (in the Extra folder or in your /Library/Preferences/SystemConfiguration folder). To be sure just open the System Profiler and look under Software (I think, my OS is in french) I have it in 32-bit only and it seems to work great. I can boot in 64 bit with other drivers but I have no QE/CI, so lots of stuff is not working properly. I you find a solution for 64-bit, let me know ! Sorry my bad, I thought I was in a Snow Leopard forum. Leopard is only 32-bit.
  4. Retail post-install on Asus P5W Mobo

    Hi Bigby, is the graphic card working perfectly in 64-bit also ?
  5. OSx86 Lenovo Y510

    Hi, I recently was able to have a nearly perfect Leopard installation on my Lenovo Ideapad Y510. I have the Y510 model with the T5750 processor and the X3100 graphic card. I had to buy some stuff (like 80$ value) in order to get it working. Now here is my setup. A few month ago I had to find an hacked bios in order for OSX to find my processor's two cores. You could stay with the latest available BIOS ( http://consumersupport.lenovo.com/en/Drive...s_show_976.html ) and I think that with DSDT now, it could work. If you want to take the same as me, go download this one : http://forum.insanelymac.com/index.php?sho...mp;#entry811350 I have a dual boot with Vista, so my hard drive is in a MBR partition type. I imagine that GUID will work even better. I used iPC 10.5.6 OSX. Here's what I have selected during the installation : - I didn't select any kernel which gives the default 10.5.6 vanilla kernel. Feel free to test other kernels. - Drivers o Video : nothing selected (I used other drivers, but it is maybe working with the one in this disc, try and test it if you want) o Chipsets : • Intel ICHx SATA drivers • LegacyAppleIntelPIIXATA.kext (not sure if that does anything) o Audio : alc888d o Wireless : broadcom driver (for me, since I changed my card) o USB : patched usb drivers o Power management : clamshell display support . - Fixes and patches o Firewire mount fix o Dual boot time sync (since I have vista also) o Shutdown restart (not sure if that is working since I sometimes have problem shutting the computer after it went to sleep) o PS2 device support • PS2 keyboard fix o AppleSMBIOS Patch • AppleSMBIOS-27 Rev3 667 Mhz o Alternate bootloader • Chameleon DSDT patch with custom boot picture (you could try the other one or leave it blank, I haven't tested those one) - Applications o Take everything you need but be sure to select DSDT Patcher GUI and kexthelper Install. First boot. - Install graphic kext for x3100 from ideneb ( http://www.mediafire.com/download.php?m0tgj5ygzzi ) with kexthelper. - As for the power management, be sure to have the vanilla one. If not sure, extract it from an official 10.5.6 update with Pacifist. Install ACPIBattery.kext from superhai ( http://superhai.com/darwin.html ) with kexthelper. That was the most accurate power management I tested. - Ricoh Flash SD card reader : Install IOSDHCIBlockDevice.kext from http://forum.insanelymac.com/index.php?showtopic=132679 - I found out that my Firewire was not working, after a few reading I found that AppleHPET.kext was causing the problem. Even though I don't know what it is for, I decided to delete it and guess what, the firewire is now working. So far, everything else seems to work as before the removing of AppleHPET.kext. If someone knows what is its common use, please tell us. - Time Machine was reporting an ERROR_OBTAINING_MAC_ADDRESS when selecting the Destination drive. Fixed by changing IONetworkingFamily.kext 1.6.1 to 1.6.0 found here : http://www.mediafire.com/?jzjmrw0nwit - Open DSDT Patcher GUI. Select Vista as the os simulation, click on apply patch to : and select your hard drive. Click on Run DSDT patcher. Once this is done (I had 5 warnings, no errors) reboot the computer. You could also repair permissions before doing that. After the reboot, the sleep AND WAKE should work. That was impossible before. Closing the screen should also put it to sleep after a while. You'll maybe have to select "reboot automatically after a power shutdown" in Energy Saver's options if you want it to wake properly. In order to have the Deep sleep working properly, I think that you'll have to install the newest chameleon bootloader (thus removing the custom boot picture option). Here's what is not working by default: - Integrated wired and wireless. I had to buy a Dell 1505 802.11n (Broadcom bcm4321) from ebay and an Apple USB-Ethernet adapter. With the stock BIOS from Lenovo you cannot put the Broadcom bcm4321 instead of the intel wireless card because the laptop won't boot. Instead you can install the new card in the empty mini-pcie slot near the hard drive and connect the small antenna cables to it. - The VGA connector for an external monitor is not able to mirror your display, but you can use it as an extended desktop. There maybe something to do with the Switchres application but I wasn't able to make it work. There are also some USB to DVI graphic card available that could maybe do the trick (but without 3d acceleration). It has to be tested. - Brightness control: with my working drivers, I can't change the screen brigthness which is a shame for the battery life. - Deep sleep : Its kinda not working. It goes to deep sleep, but it mainly do the same as a normal shutdown. I think I'll need latest Chameleon release for it. - Shutdown issue : I have a weird issue with my laptop's shutdown ability. When I go to sleep and wake from it, when I shutdown my computer, I have a kernel panic, something to do with AppleHDAController. - Earphones jack: when you plug earphones, the sound is not switching directly from the speakers to the earphones, you have to do it manually. - Webcam: it is working quite nicely BUT the image is upside down. You can adjust it via a software but it also slows down considerably the webcam and its quality (from what I have tested). - Ricoh Flash card reader : SD card Working with additionnal IOSDHCIBlockDevice.kext from http://forum.insanelymac.com/index.php?showtopic=132679. Other types of cards were not tested. - Express card : never tested. - Modem : never tested. - S-video: never tested. That pretty much seals the deal. That is how I did it, but there are lots of ways. Post your setup and things that are working or not. If you have any questions feel free to ask. Have fun!
  6. Kalyway 10.5.1 on Lenovo Ideapad Y510

    Hi, I recently was able to have a nearly perfect Leopard installation on my Lenovo Ideapad Y510. I have the Y510 model with the T5750 processor and the X3100 graphic card. I had to buy some stuff (like 80$ value) in order to get it working. Now here is my setup. A few month ago I had to find an hacked bios in order for OSX to find my processor's two cores. You could stay with the latest available BIOS ( http://consumersupport.lenovo.com/en/Drive...s_show_976.html ) and I think that with DSDT now, it could work. If you want to take the same as me, go download this one : http://forum.insanelymac.com/index.php?sho...mp;#entry811350 I have a dual boot with Vista, so my hard drive is in a MBR partition type. I imagine that GUID will work even better. I used iPC 10.5.6 OSX. Here's what I have selected during the installation : - I didn't select any kernel which gives the default 10.5.6 vanilla kernel. Feel free to test other kernels. - Drivers o Video : nothing selected (I used other drivers, but it is maybe working with the one in this disc, try and test it if you want) o Chipsets : • Intel ICHx SATA drivers • LegacyAppleIntelPIIXATA.kext (not sure if that does anything) o Audio : alc888d o Wireless : broadcom driver (for me, since I changed my card) o USB : patched usb drivers o Power management : clamshell display support . - Fixes and patches o Firewire mount fix o Dual boot time sync (since I have vista also) o Shutdown restart (not sure if that is working since I sometimes have problem shutting the computer after it went to sleep) o PS2 device support • PS2 keyboard fix o AppleSMBIOS Patch • AppleSMBIOS-27 Rev3 667 Mhz o Alternate bootloader • Chameleon DSDT patch with custom boot picture (you could try the other one or leave it blank, I haven't tested those one) - Applications o Take everything you need but be sure to select DSDT Patcher GUI and kexthelper Install. First boot. - Install graphic kext for x3100 from ideneb ( http://www.mediafire.com/download.php?m0tgj5ygzzi ) with kexthelper. - As for the power management, be sure to have the vanilla one. If not sure, extract it from an official 10.5.6 update with Pacifist. Install ACPIBattery.kext from superhai ( http://superhai.com/darwin.html ) with kexthelper. That was the most accurate power management I tested. - Ricoh Flash SD card reader : Install IOSDHCIBlockDevice.kext from http://forum.insanelymac.com/index.php?showtopic=132679 - I found out that my Firewire was not working, after a few reading I found that AppleHPET.kext was causing the problem. Even though I don't know what it is for, I decided to delete it and guess what, the firewire is now working. So far, everything else seems to work as before the removing of AppleHPET.kext. If someone knows what is its common use, please tell us. - Time Machine was reporting an ERROR_OBTAINING_MAC_ADDRESS when selecting the Destination drive. Fixed by changing IONetworkingFamily.kext 1.6.1 to 1.6.0 found here : http://www.mediafire.com/?jzjmrw0nwit - Open DSDT Patcher GUI. Select Vista as the os simulation, click on apply patch to : and select your hard drive. Click on Run DSDT patcher. Once this is done (I had 5 warnings, no errors) reboot the computer. You could also repair permissions before doing that. After the reboot, the sleep AND WAKE should work. That was impossible before. Closing the screen should also put it to sleep after a while. You'll maybe have to select "reboot automatically after a power shutdown" in Energy Saver's options if you want it to wake properly. In order to have the Deep sleep working properly, I think that you'll have to install the newest chameleon bootloader (thus removing the custom boot picture option). Here's what is not working by default: - Integrated wired and wireless. I had to buy a Dell 1505 802.11n (Broadcom bcm4321) from ebay and an Apple USB-Ethernet adapter. With the stock BIOS from Lenovo you cannot put the Broadcom bcm4321 instead of the intel wireless card because the laptop won't boot. Instead you can install the new card in the empty mini-pcie slot near the hard drive and connect the small antenna cables to it. - The VGA connector for an external monitor is not able to mirror your display, but you can use it as an extended desktop. There maybe something to do with the Switchres application but I wasn't able to make it work. There are also some USB to DVI graphic card available that could maybe do the trick (but without 3d acceleration). It has to be tested. - Brightness control: with my working drivers, I can't change the screen brigthness which is a shame for the battery life. - Deep sleep : Its kinda not working. It goes to deep sleep, but it mainly do the same as a normal shutdown. I think I'll need latest Chameleon release for it. - Shutdown issue : I have a weird issue with my laptop's shutdown ability. When I go to sleep and wake from it, when I shutdown my computer, I have a kernel panic, something to do with AppleHDAController. - Earphones jack: when you plug earphones, the sound is not switching directly from the speakers to the earphones, you have to do it manually. - Webcam: it is working quite nicely BUT the image is upside down. You can adjust it via a software but it also slows down considerably the webcam and its quality (from what I have tested). - Ricoh Flash card reader : SD card Working with additionnal IOSDHCIBlockDevice.kext from http://forum.insanelymac.com/index.php?showtopic=132679. Other types of cards were not tested. - Express card : never tested. - Modem : never tested. - S-video: never tested. That pretty much seals the deal. That is how I did it, but there are lots of ways. Post your setup and things that are working or not. If you have any questions feel free to ask. Have fun!
  7. Leopard on Lenovo y510 notebook

    Hi, I recently was able to have a nearly perfect Leopard installation on my Lenovo Ideapad Y510. I have the Y510 model with the T5750 processor and the X3100 graphic card. I had to buy some stuff (like 80$ value) in order to get it working. Now here is my setup. A few month ago I had to find an hacked bios in order for OSX to find my processor's two cores. You could stay with the latest available BIOS ( http://consumersupport.lenovo.com/en/Drive...s_show_976.html ) and I think that with DSDT now, it could work. If you want to take the same as me, go download this one : http://forum.insanelymac.com/index.php?sho...mp;#entry811350 I have a dual boot with Vista, so my hard drive is in a MBR partition type. I imagine that GUID will work even better. I used iPC 10.5.6 OSX. Here's what I have selected during the installation : - I didn't select any kernel which gives the default 10.5.6 vanilla kernel. Feel free to test other kernels. - Drivers o Video : nothing selected (I used other drivers, but it is maybe working with the one in this disc, try and test it if you want) o Chipsets : • Intel ICHx SATA drivers • LegacyAppleIntelPIIXATA.kext (not sure if that does anything) o Audio : alc888d o Wireless : broadcom driver (for me, since I changed my card) o USB : patched usb drivers o Power management : clamshell display support . - Fixes and patches o Firewire mount fix o Dual boot time sync (since I have vista also) o Shutdown restart (not sure if that is working since I sometimes have problem shutting the computer after it went to sleep) o PS2 device support • PS2 keyboard fix o AppleSMBIOS Patch • AppleSMBIOS-27 Rev3 667 Mhz o Alternate bootloader • Chameleon DSDT patch with custom boot picture (you could try the other one or leave it blank, I haven't tested those one) - Applications o Take everything you need but be sure to select DSDT Patcher GUI and kexthelper Install. First boot. - Install graphic kext for x3100 from ideneb ( http://www.mediafire.com/download.php?m0tgj5ygzzi ) with kexthelper. - As for the power management, be sure to have the vanilla one. If not sure, extract it from an official 10.5.6 update with Pacifist. Install ACPIBattery.kext from superhai ( http://superhai.com/darwin.html ) with kexthelper. That was the most accurate power management I tested. - Ricoh Flash SD card reader : Install IOSDHCIBlockDevice.kext from http://forum.insanelymac.com/index.php?showtopic=132679 - I found out that my Firewire was not working, after a few reading I found that AppleHPET.kext was causing the problem. Even though I don't know what it is for, I decided to delete it and guess what, the firewire is now working. So far, everything else seems to work as before the removing of AppleHPET.kext. If someone knows what is its common use, please tell us. - Time Machine was reporting an ERROR_OBTAINING_MAC_ADDRESS when selecting the Destination drive. Fixed by changing IONetworkingFamily.kext 1.6.1 to 1.6.0 found here : http://www.mediafire.com/?jzjmrw0nwit - Open DSDT Patcher GUI. Select Vista as the os simulation, click on apply patch to : and select your hard drive. Click on Run DSDT patcher. Once this is done (I had 5 warnings, no errors) reboot the computer. You could also repair permissions before doing that. After the reboot, the sleep AND WAKE should work. That was impossible before. Closing the screen should also put it to sleep after a while. You'll maybe have to select "reboot automatically after a power shutdown" in Energy Saver's options if you want it to wake properly. In order to have the Deep sleep working properly, I think that you'll have to install the newest chameleon bootloader (thus removing the custom boot picture option). Here's what is not working by default: - Integrated wired and wireless. I had to buy a Dell 1505 802.11n (Broadcom bcm4321) from ebay and an Apple USB-Ethernet adapter. With the stock BIOS from Lenovo you cannot put the Broadcom bcm4321 instead of the intel wireless card because the laptop won't boot. Instead you can install the new card in the empty mini-pcie slot near the hard drive and connect the small antenna cables to it. - The VGA connector for an external monitor is not able to mirror your display, but you can use it as an extended desktop. There maybe something to do with the Switchres application but I wasn't able to make it work. There are also some USB to DVI graphic card available that could maybe do the trick (but without 3d acceleration). It has to be tested. - Brightness control: with my working drivers, I can't change the screen brigthness which is a shame for the battery life. - Deep sleep : Its kinda not working. It goes to deep sleep, but it mainly do the same as a normal shutdown. I think I'll need latest Chameleon release for it. - Shutdown issue : I have a weird issue with my laptop's shutdown ability. When I go to sleep and wake from it, when I shutdown my computer, I have a kernel panic, something to do with AppleHDAController. - Earphones jack: when you plug earphones, the sound is not switching directly from the speakers to the earphones, you have to do it manually. - Webcam: it is working quite nicely BUT the image is upside down. You can adjust it via a software but it also slows down considerably the webcam and its quality (from what I have tested). - Ricoh Flash card reader : SD card Working with additionnal IOSDHCIBlockDevice.kext from http://forum.insanelymac.com/index.php?showtopic=132679. Other types of cards were not tested. - Express card : never tested. - Modem : never tested. - S-video: never tested. That pretty much seals the deal. That is how I did it, but there are lots of ways. Post your setup and things that are working or not. If you have any questions feel free to ask. Have fun!
  8. Headphone jack associated with Y510 and Leopard

    Hi Computermod14, I have the same laptop and it is Realtek alc888. I have tested 5 different drivers for this but it is still not working out of the box. It's the same problem with my other computer (p5w dh deluxe, alc882) Just to be sure, if you select it manually can you hear from the earphones ? And by the way, are you able to mirror your display if you plug an external monitor and are you able to change the screen brigthness ?
  9. Leopard on Lenovo y510 notebook

    I tested a Dell 1505 802.11n wifi mini pci-e card and it is working out of the box if you put it in the second pci-e slot (near the HDD). But I think you need to keep the intel 4965 in its original slot.
  10. Leopard on Lenovo y510 notebook

    Hi both of you. I forgot to write something when i wrote that novel. After the mac install, I returned to acronis disk director to activate the vista partition. after that I boot in vista, install and configure easybcd reboot and got the 2 boot choices. The only that rest to configure is - the mono cpu: afraid to do the bios update. will try someother things first. - Sleep and wake mode. will try switching acpiX files from 10.4 - Battery indicator/power plan is working great. - wifi: will try another wifi pcie card on the second pci-e slot beside the HDD. (if you want, you can buy a usb wifi dongle that will do the job) - ehternet : still not working but I bought Apple's usb ethernet adapter for less than 30 $ and it works really good.
  11. Leopard on Lenovo y510 notebook

    I finally received my laptop yesterday. I was able to install Jas 10.5.4 on it. First, here is how my laptop is set: I first boot vista and setup my windows how I want it because I prefer to keep a dual boot as long as my leopard isn't entirely stable. So I uninstall somestuff and installed others in vista. Lenovo partitioned my drive as the following : ~180gb for c: ~20gb for d: (nothing in that) the rest for their own recovery partition. I used acronis true image to make a clone of my disk on another hdd in order to come back later if needed. I then used acronis disk director to delete the 20 gb partition, resize the c: to 35 gb or something and created a new fat32 with the free space. I left the recovery partition intact. Then I boot into jas 10.5.4 dvd. I formated the fat32 partition into the rigth mac format. I didn't repartition the drive in disk utility, so I left the drive MBR. For the settings now: The vanilla kernel didn't seemed to work in all of my tries. BUT the ToH 10.5.4 kernel did. I selected x11, alc888, intel ichx in chipset section, intel lpc, intel ich7 to ich9, superhai smbios, smbios 667 and that's pretty much it. After the install, I booted in vista, installed easybcd (google it) in order to make the dual boot (there are other ways but that is how I did it). I rebooted, choosed leopard, type as options: "-v cpus=1" (without quotes) and it booted. I don't know why but "cpus=1 -v" didn't work, can someone explain me ? To my surprise at the leopard screen, it wasn't able to find my laptop keyboard and trackpad, eventhough I selected Generic ps2 nub version fix during the installation. Maybe you also have to check also ACPIPS2nub or only that one (try it and tell me). So I had to use a usb keyboard and mouse, but I found a file named appleps2controller.kext that solved my problem. So now, the things that do not work are : - powermanagement for the laptop - sleep, and wake from it because it can't wake up. - Ethernet cable, at the moment I didn't find a way to make it work. - wifi (normal and won't work) - It only sees 1 core for the moment, maybe the hacked bios update will make it work, but I am not about to test it. - the display freezes when you try to switch between displays, although if you boot with a second monitor plugged in it will work but only as extended, not mirror.
  12. Leopard on Lenovo y510 notebook

    Like I said, I didn't try it yet since I didn't received the laptop. But, usually there are 2 ways to do a BIOS update. If we're lucky we can put the files on a cd or usb stick, go in the laptop BIOS and run a utility for a BIOS update. But usually, you have to boot in Windows, use Lenovo's program (probably found on one of the CDs they gave with the laptop or on their website) to update bios. BUT again try it at your own risk!!! If you mess up the bios update or if this file is not working right with your laptop, there is a chance that your laptop won't boot AT ALL !
  13. Leopard on Lenovo y510 notebook

    You can maybe try to change your bios with the version found there: http://forum.insanelymac.com/index.php?act...&pid=811350 It is for a y510 but I am not sure if it works for all y510. I haven't tried this bios. I have ordered that laptop (core 2 t5750, 250 gb, x3100 graphics version) and should receive it this weeks so you'll have more news from here in the coming days ! I just hope it will work fine and that I'll be able to put a N mini-pcie wireless card.
  14. I have solved my problem. In Terminal I had to play with the pmset command. womp and ttyskeepawake were activated. I disabled it and it's now working. When I write pmset -g in terminal I now have this : Active Profiles: AC Power -1* Currently in use: sleep 3 displaysleep 1 powerbutton 1 hibernatefile /var/vw/sleepimage hibernatemode 1 womp 0 disksleep 2 ttyskeepawake 0
  15. Thanks for the answer. I already tried to kill all unnecessary process, without any results.
×