Jump to content

mafhper

Members
  • Content count

    20
  • Joined

  • Last visited

About mafhper

  • Rank
    InsanelyMac Protégé
  • Birthday May 18

Profile Information

  • Gender
    Male
  • Location
    Brazil
  1. Hello Goodfellas someone out there could adjust their SMBios.plist according to new Mac with Haswell? I have a Radeon HD5850 + Haswell together and wanted to test the gain of your perfomace with the most accurate adjustments.
  2. Hello friends, with the launch of the new machines equipped with Haswell someone there has the SMBios.plis appropriate? Serial number ... such information match. Reinstalled the Mavericks, but now using the version published. Everything is round, but after taking a look at Cinebench realize I missed a lot in the performance of my GPU (even when using the same kexts).
  3. Hello Brother, nice to see your initiative, so I've been aware that the board has its distinct characteristics of listed here. Are small, but worth remembering: Memory Z87M-D3H: 4x DDR3 1600/1333 MHz Z87-D3HP: Same as above + (1866/2133/2200/2400/2600/2800Mhz OC) Audio Z87M-D3H: ALC 892 Chip Z87-D3HP: Same as above + Optical SPDIF Out LAN Z87M-D3H: 1 x Realtek 811F-VL w/ ESD Protection Z87-D3HP: 1 x Intel i217V / ESD Protection Expansion Slots Z87M-D3H: 1 x PCI Express x16 slots, running at x16*, 1 x PCI Express x16, running at x4*, 2 x PCI slots Z87-D3HP: Same as above + 2 x PCI Express x1 slot Storage Interface Z87M-D3H: 6 x SATA 6Gb/s connectors Z87-D3HP: Same as above + Raid 0,1,5,10 Form factor Z87M-D3H: Micro ATX Z87-D3HP: ATX I have a hack running Mavericks with a AMD Radeon HD5850 Toxic 1GB. Comes close to its configuration. I had some problems in the beginning and also managed to solve the collecting and testing tips spread this trend. Try, for example, that: http://www.insanelymac.com/forum/topic/289729-success-gigabyte-z87-d3hp-first-haswell-hackintosh/?p=1938094
  4. aiuto ga-z87m-d3h

    Salute my friend. This tread can a help you: http://ess-gigabyte-z87-d3hp-first-haswell-hackintosh/ Not exactly the same motherboard, but the process is similar.
  5. GM in the house! Get ready for a clean installation.
  6. Just reinstalled the kexts AppleHDA and HDAEnabler distributed here. Everything ok.
  7. Try booting into safe mode, or, try booting in terminal mode. Maybe you run your installer again you can remove the file from the terminal. *hacking career* Oh boy...here we go. I use hackintosh to work, perhaps different from most is that as proof of concept. Something so small that it does not disturb the operation of the machine is disregarded by me. Anyway only the MacBook Air late 2013 are currently using Haswell. What would be the advantage of having SMBios them on my desktop?
  8. Until I understand and I know I could fix, but I use the machine to work, so my concerns are different.
  9. Forget it. It's a Hack. The important thing is it's working. Here in my country we have a name for it: gambiarra.
  10. OS X 10.9 DP 6 installed via the Mac App Store. All is well (and fast) here!
  11. Hello Yuras, would be nice of you to continue this discussion in the original thread. I have this same board and succeeded in getting it run perfectly through the information I received there. In general (I speak of what I learned in practice) go to the bios and disable the onboard graphics and the option for VT-d. Let us return to the beginning. Create a USB drive with MyHack again. Download the correct version of Chameleon (Chameleon-2.2svn-r2255) and apply it on your installation of MyHack. You may have to change the Boot.plist and arrow it to NCPI = 0x3000. This will fix some problems clock Haswell. I can not help you with the graphics, since my GPU is an AMD, but left the GraphicsEnabler = Yes, ATI Config (Uakari), Ports = 4 and ATI Graphics Mode 1920x1080x32. Proceed with the boot, select your usb drive ... well, I guess you know how to do this. After installing 10.9 DP1, try to make your GPU work. Do not waste time downloading DP2 .... DP5 if your setup is not ok. Turn the Kext Wizard and install the kexts you need. Repair permissions S / L / E and follow this direction ...
  12. Hello @Pike Do not quite understand your point. The problem with AMD it was me. I had never made ​​a Hackintosh using this GPU. Initially had failed to make it work and could not run the machine without the-x flag. I do not understand what you mean.
  13. Yes friends! Toxic Radeon HD5850 working perfectly on OS X 10.9 DP5. Geekbench did not bring the result of the fact that with of this machine, but look great as well (with Windows 7 get 12470). Now we need to make the audio work (Voodoo, AppleHDA?), but let it later...
  14. @René First of all thank you, had in mind would be something like this should do. The kexts I mentioned, just removed the other IDs that were not mine. However I noticed something, there is a conflict between the original kexts Mavericks that correspond with the ATI. For example: - AMDRadeonX3000.kext (or something ...) with ATIRadeonX3000.kext I got this error on the console during boot. Should I remove the kext with AMD *. Kext? I am recreating my USB Boot Drive, and I will try this way.
  15. A new day, a new problem. Could proceed with the update and now I'm on OS X 10.9 DP5, but still can not get the boot without having to use the the-x flag. I read something about using the kexts: - ATISupport.kext - ATIRadeonX3000.ket - ATI5000Controller.kext Taking care to later add the id of my Radeon HD5850 1GB Toxic (id = 6899) in these kext plist. Unfortunately now I'm caught in the boot and the return I am having is that the kext ATISupport is duplicated with ATIController. Someone passed around?
×