Jump to content
InsanelyMac Forum

Tue Bui

Members
  • Content count

    9
  • Joined

  • Last visited

About Tue Bui

  • Rank
    InsanelyMac Protégé
  1. Toshiba Satellite R830/835 OSX 10.8 10.9

    You need the right DSDT.aml, check the attachment in the first post, and copy it into /Extra folder. Hope this would help.
  2. Toshiba Satellite R830/835 OSX 10.8 10.9

    Oh, sorry. I haven't opened the attachment to test yet. I've just skimmed through the post and seen that you guys might have had problems with VGA so I posted my own patch. However, it seems to be redundant, just ignore it then. Nothing complicated here, look for the hex string 01 02 04 00 10 07 00 00 10 07 00 00 and replace the next ones with these hex which are supposed to be 4 pin connectors LVDS, HDMI, VGA, and Displayport(we don't need this). 05 03 00 00 02 00 00 00 30 00 00 00 02 05 00 00 00 04 00 00 07 00 00 00 06 02 00 00 02 00 00 00 30 00 00 00 04 06 00 00 00 04 00 00 09 00 00 00
  3. Toshiba Satellite R830/835 OSX 10.8 10.9

    Hi, I thought this kext would help you to light up your VGA port. I have been using it for months, HDMI works too. Search Google for this topic "[success] VGA port fix for Intel HD 3000" if you wanted to know how it works. AppleIntelSNBGraphicsFB.kext.zip
  4. OMG. I finally hacked it. The problem was my LCD panel EDID couldn't be recognized by MAC and BIOS. So patching AppleIntelFrameBufferCapri.kext didn't help. I noticed some ppl in the forum had the same problem as mine. They thought the internal display may be connected in the different port than those have been discovered. To solve this problem, I injected my EDID (got from switchResX by logging in Safe Mode) in to DSDT. Some said you could do this by using Clover boot loader as well but I haven't tried it yet. So here is my injection: Method (_DSM, 4, NotSerialized) { If (LEqual (Arg2, Zero)) { Return (Buffer (One) { 0x03 }) } Return (Package (0x0A) { "device_type", Buffer (0x08) { "display" }, "built-in", Buffer (One) { 0x01 }, "AAPL,DualLink", Buffer (0x04) { 0x01, 0x00, 0x00, 0x00 }, "AAPL00,override-no-edid", Buffer (0x80) { /* 0000 */ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, /* 0008 */ 0x51, 0xF3, 0x91, 0x50, 0x04, 0x00, 0x00, 0x00, /* 0010 */ 0x0E, 0x10, 0x01, 0x03, 0x80, 0x1D, 0x11, 0xFF, /* 0018 */ 0x2F, 0x00, 0x00, 0xA0, 0x57, 0x49, 0x9B, 0x26, /* 0020 */ 0x10, 0x48, 0x4F, 0x00, 0x00, 0x00, 0x01, 0x01, /* 0028 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, /* 0030 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xC6, 0x1D, /* 0038 */ 0x56, 0x02, 0x51, 0x00, 0x0C, 0x30, 0x22, 0x70, /* 0040 */ 0x12, 0x00, 0x27, 0xA6, 0x10, 0x00, 0x00, 0x18, /* 0048 */ 0xDA, 0x13, 0x56, 0x02, 0x51, 0x00, 0x0C, 0x30, /* 0050 */ 0x22, 0x70, 0x12, 0x00, 0x27, 0xA6, 0x10, 0x00, /* 0058 */ 0x00, 0x18, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x49, /* 0060 */ 0x6E, 0x74, 0x65, 0x72, 0x6E, 0x61, 0x6C, 0x20, /* 0068 */ 0x4C, 0x43, 0x44, 0x0A, 0x00, 0x00, 0x00, 0xFD, /* 0070 */ 0x00, 0x00, 0x3C, 0x00, 0x3D, 0x08, 0x00, 0x00, /* 0078 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xA7 } Then: Mac will accept the input from my internal display: I didn't include ig-platform-id (0x01660003) in this because I used GraphicsEnabler module of the Chameleon. Hope this would help for the others who couldn't light up their LVDS after trying > 10 ig-platform-id(s). Bye for now.
  5. Hi all, It's me again. I did make some progress. QE/CI works with HDMI, but no matter how hard I tried my internal display couldn't work. I did use every LVDS hex codes possible: 01 00 00 00 00 02 00 00 30 00 00 00, 05 03 00 00 02 00 00 00 30 00 00 00 or even 05 03 00 00 02 00 00 00 30 02 00 00. My HDMI out could work with following hex: 02 05 00 00 00 04 00 00 07 04 00 00 or 04 06 00 00 08 00 00 06 00 00 00. I run out of ideas now. Any help, please? ioreg.zip
  6. Well, not sure if I made any progress. I deleted *capri.kext and then I can boot into ML without the black screen. But the UI is not so responsive and pretty laggy.
  7. Have tried, but get still the same problem: Black screen. It seems like the graphics card was loaded but the internal display couldn't show up. Thanks
  8. Hi there, thanks for helping. First, HD 4000 is the only graphic card the laptop has. Second: I did read the instructions for installing HD4000 via the link before. Using "aapl, ig-platform-id" injection in the boot.plist makes me stuck at the NTFS scanning as you've seen in the pic above. I did try to patch DSDT as well, and thought It could be closer to the solution than using EFI string because It could get through the NTFS scanning above, but I got the black screen. Searching through different hackintosh sites, some said that *capriFB.kext needs patching as the graphics outputs in the wrong pipe or so. I used the new DSDT that has the platform-id 01660003 in it (did try 0004, 0001, 0000 too): Device (GFX0) { Name (_ADR, 0x00020000) Method (_DSM, 4, NotSerialized) { Store (Package (0x0A) { "@0,built-in", Buffer (One) { 0x01 }, "AAPL00,DualLink", Buffer (0x04) { 0x01, 0x00, 0x00, 0x00 }, "device-id", Buffer (0x04) { 0x66, 0x01, 0x00, 0x00 }, "AAPL,ig-platform-id", Buffer (0x04) { 0x03, 0x00, 0x66, 0x01 }, "hda-gfx", Buffer (0x0A) { "onboard-1" } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } Again, appreciated your help. I tried GraphicsEnabler=No or delete *capri.kext but nothing changed
  9. Hi everyone. I'm currently trying to install ML 10.8.4 in my just bought laptop. I have an old version of this laptop series that is the R830 integrated sandy bridge CPU, which I installed successfully ML 10.8.4 and have been using for over a year. But things become complicated in this new one with HD 4000 in it. I can boot in the safe mode and also in a normal mode without AppleIntelGraphicsHD4000 there. I couldn't get to the login screen If I ignored the kernel cache. I get stuck right here without any noticeable errors, so don't know how to fix now after trying inject device properties into DSDT, boot.plist, patched AppleintelFramebufferFB (or maybe i didn't do it right). SO, any help would be much appreciated. I attached files DSDT and smbios, boot.plist, system log for your reference. Let me know if you need anything else. Thanks r935.zip
×