Leaderboard

And again!!!

Beta3 (23F5064f)

👍

Amd patcheds are doing their good job as usual!

Flawless ☺️

Done

AMD kernel patches are good

👍

beta 3 seeded ...

Update on Dell Optiplex 790 base Graphics Kepler Upgrade Hardware with a SSD M.2 2TB 980 EVO NVMe on a cady Socket M.2 NGFF SATA SSD This old PC is a really cool

https://swcdn.apple.com/content/downloads/08/22/052-84341-A_X02G1CNG77/b7jhq33vk7yoaxeahzwey830bek8bka4t7/InstallAssistant.pkg

My first Mac Powerbook 165c is power on but 128mb hard drive crash. I'm here with my HP Z800 & HPZ840 Hackintosh.

No issues. Everything works.

👍

Done

I Dowloaded A Single Layer DVD Of 10.6.7 Snow Leopard Curtesy Of Archive.org It Installed On My iMac Just Fine P.S I'm 68, Was 21 When I First Got Into Hackintoshing 😄

I have been using a few Intel X540-AT2 Dual Base-T x8 NICs on a some of my Hackintosh dual boot systems: 1 x Skylake, 2 x Coffee Lake, 1 x AMD FX, 1 x AMD Ryzen B550 all with your IntelLucy.kext. I have upgraded IntelLucy to version 1.0.0. I am really grateful for the work you have put in to this project as it has allowed me to make greater use of my QNAP 1208 10G switch. Using some relatively inexpensive Intel Server NICs (£30+) to expand my 10G network. My other systems are using ACQ107 10G PCIe x4 cards. People need to be wary of the really cheap (£14-£20) INSUPER X540-AT2 NICs that are flooding eBay from China, as they aren’t macOS friendly. The X540-AT2 NICs work at 1GB or 10G, no 2.5G connection to my 2.5G switch only 1G. Surprisingly both 10G Base-T connectors work in macOS. I have changed all my Ethernet cables to Cat8, and have LC-LC 50/125um Multimode Fibre Optic Cable connections running between my 10GbE network switches.

14.5 Beta (23F5059e) update went well on Z690 HACK

All these posts with pics of the golden age of Apple OS, got me feeling all nostalgic and young again.

Awww Bro you're just a youngster!!!! Well maybe not quite, but I am beating you by an extra 3 years. Long may we reign to see the next Apple OS and perhaps the inevitable (hopefully not too soon) death of Hackintosh.

Im here too See this old screenshots

...also started with Tiger{i think} deadmoo image pentium4, agp and pci video cards, my first mac was a Mac Performa 68k... circa 1992 🧐

@eSaF The saying goes "let sleeping dogs lie", with that one just cannot be "bitten". Greetings Henties

@loganMac - It really was unnecessary to clean install to get rid of the two problems you listed. As @Mirone advised clearing out the files from /Library/Logs/DiagnosticReports Folder would have solved the 'Shut Down Popup' problem. The Processor problem is related to wrong or incorrect data in the config.plist. Happy you got sorted with a clean install but going forward, hopefully you won't have to solve every problem that way.

Which Sonoma would be good after applying the change? The same 14.4.1?

@loganMac, Fix First problem: Set processorType = 4097 in your SMBIOS. Fix second problem: go to /Library/Logs/DiagnosticReports delete all files, or delete those files that are related to the warning.

Well I've Got My Early 2008 iMac Running With Monterey On 2GB Ram Not Too Shabby, I Will Be Upgrading The Ram And Throwing An SSD In As Well

I know several errors in System Information since Tiger time so I trust ioreg.

Update done, but this update i must install via installAssitant.pkg file, can't upgrade as normal

Uoooowww!!! Very Nice!!!

Done

I'm Putting Together Some Files That ARE Needed If You WANT To Go The Snow Leopard Path YOU CAN'T BEAT THE 3D DOCK!! I'll Post A Link Soon Nice Pictures

No INSTAHackintosh Is All I Did, BUT They May Have Used It

Are you sure you aren't iDeneb author? 😅

There are good news to report since the last update 10 days ago. As Intel is going to stop production of the X540 this year, many retailers are selling out their inventory of X540 based cards offering rebates on these adapters. On AliExpress there are several offers for X540 adapters below 20€ so that I decided to give it a try and ordered one of these cards last week for a little bit more than 10€, shipping included. At first I was quite sceptic about the card's quality, in particular as the retailer mentioned that it may not work with certain mainboards and that the adapter runs very hot, but after it arrived last Monday, I am extremely happy with the purchase and can confirm that the card is more than worth the money. Here is a photo of the card: The quality is quite good, although there has been some dirt on the PCIe connector, but the heatsink is adequate for such a power hungry card. Nevertheless, it runs quite hot when both ports are active so that you can't touch it anymore but that's not unusual for passively cooled X540 adapters. Besides the second RJ-45 connector, there is a jumper (see the red arrow) to disable the second port allowing you to save power (and limit heat dissipation) in case it is not needed. Unfortunately the retailer didn't lie when he mentioned that the card may not work in certain mainboards. My Asrock H97M-Pro4 will immediately shut down on power-on with the card installed. Therefore I installed it in the PEG slot of my MSI MPG Z490 Gaming Plus and it worked perfectly without a single issue. Maybe it's because a powerful Gaming mainboard is designed to cope with the power consumption of high-end GPUs? Both systems are equipped with a 400W PSU. Anyway, you need a good airflow in your case when using such a card. Running stability tests I haven't noticed a single connection drop but after two days of testing you can't tell anything about long term stability. I wouldn't use this for my home server, in particular because of the power consumption (according to Intel the X540 the typical power consumption with one port active is 10.8W and 17.4W with both ports active), but for a test system or first steps with 10Gbit Ethernet it's the perfect solution, although I would recommend the X520 with a DAC cable, provided you only have to bridge a distance of up to 5 meter because it's the cheapest and most power efficient solution (~0.1W per active port) or a 10GBase-SR SPF+ module with a multi-mode fibre cable, which also consumes less power (~0.6W per active port) than 10GBase-T (~3W per active port). As a result of my testing I was able to fix some issues and improve IntelLucy. The result of my work, version 1.0.3 has been published a few minutes ago and is available in the download section or on GitHub. Also, I would like to thank you all for your support of the project and your testing efforts. Have fun❣️

I've gone back to Snow Leopard On My 2010 iMac BUT YOU CAN'T SURF THE WEB, YOU MAY SAY!! Great Browser Called InterWeb Works A Treat!!

@iwissem, This script is not mine, I just grabbed it a few posts back and posted it to you because you asked, so the credits go to whoever wrote it. Regarding your codec issue, it could be several factors. When you mention External Microphone, are you referring to the ComboJack? Are you using AppleALC? If yes, could you tell me which layout-id? A few years ago, I wrote this: https://www.olarila.com/topic/5586-guide-how-to-activate-microphone-on-conexant-codecs-and-others/ it might still work, I can't say for sure.

👍

GrubISO9660.efi (or VboxIso9660) and GrubUDF.efi depending on your DVD format. CPU->Type=0x0605 or some other digits. But 13600 is really unknown for Apple. or use RestrictEvents.kext with some arguments. Ask authors.

Hi @chris1111 thanks for all icons to Linux boot specially Fedora

macOS Ventura 13.6.7 (22G716)

I needed a spare HP EliteDesk Mini, so I picked up a very cheap 800 G4 Mini that includes the AMD dGPU. Looking forward to creating an EFI for it that works with the RX560.

macOS Ventura 13.6.7 (22G711)

I should notice that HDAU name forces AppleHDA to attach to the device. As it doesn't work then you may rename the device to HDMI and then use VoodooHDA with setting <key>IONameMatch</key> <string>HDMI</string>

Where Do I Get Those Files, Clover Used To Have Them But Not Anymore

Been here since 2012, been around since System 7 (Classic Mac OS 7 for those who don't remember it). My first Hackintosh was running Tiger and before that I used Fusion PC to emulate Mac OS 8.0 from MS-DOS on a 200 MHz Pentium MMX

Yes nice my friend @Matgen84 i've have been used Fedora Workstation 39 and its amazing project from Linux Fedora Team. Much advanced then macOs in many aspects, included editor to images, my tools from Certisign signature and the challenge now is try Compile Clover on Linux, just for knowledge and im surprise with so many resources from Linux Fedora, very easy to use, and thousands of programs. God bless you!!